High Microwave-Noise Performance of AlGaN/GaN MISHEMTs on Silicon With Gate Insulator Grown by ALD

High microwave-noise performance is realized in AlGaN/GaN metal–insulator semiconductor high-electron mobility transistors (MISHEMTs) on high-resistivity silicon substrate using atomic-layer-deposited (ALD) $hbox{Al}_{2}hbox{O}_{3}$ as gate insulator. The ALD $hbox{Al}_{2}hbox{O}_{3}/hbox{AlGaN/GaN}$ MISHEMT with a 0.25- $muhbox{m}$ gate length shows excellent microwave small signal and noise performance. A high current-gain cutoff frequency $f_{T}$ of 40 GHz and maximum oscillation frequency $f_{max}$ of 76 GHz were achieved. At 10 GHz, the device exhibits low minimum-noise figure $(hbox{NF}_{min})$ of 1.0 dB together with high associate gain $(G_{a})$ of 10.5 dB and low equivalent noise resistance $(R_{n})$ of 29.2 $Omega$. This is believed to be the first report of a 0.25-$muhbox{m}$ gate-length GaN MISHEMT on silicon with such microwave-noise performance. These results indicate that the AlGaN/GaN MISHEMT with ALD $hbox{Al}_{2}hbox{O}_{3}$ gate insulator on high-resistivity Si substrate is suitable for microwave low-noise applications.      

RF Performance of N-Polar AlGaN/GaN MIS-HEMTs Grown by MOCVD on Sapphire Substrate

We present a high-performance nitrogen-polar AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistor grown on sapphire substrate using metal–organic chemical vapor deposition. Source-terminated field plates were used to mitigate the electric field in the drain-extension region and reduce dc-to-RF dispersion. Devices with 0.7-$muhbox{m}$ gate length showed a current-gain cutoff frequency $(f_{T})$ of 14 GHz and a power-gain cutoff frequency $(f_{max})$ of 36 GHz. A continuous-wave output power density of 4.7 W/mm was measured at 4 GHz, with an associated power-added efficiency of 64% and a large-signal gain of 14.4 dB at a drain bias of 30 V.      

Improved Microwave Noise Performance by SiN Passivation in AlGaN/GaN HEMTs on Si

Effects of silicon nitride (SiN) surface passivation by plasma enhanced chemical vapor deposition (PECVD) on microwave noise characteristics of AlGaN/GaN HEMTs on high-resistivity silicon (HR-Si) substrate have been investigated. About 25% improvement in the minimum noise figure $(NF_{min})$ (0.52 dB, from 2.03 dB to 1.51 dB) and 10% in the associate gain $(G_{rm a})$ (1.0 dB, from 10.3 dB to 11.3 dB) were observed after passivation. The equivalent circuit parameters and noise source parameters (including channel noise coefficient $(P)$, gate noise coefficient $(R)$, and their correlation coefficient $(C)$ ) were extracted. $P$ , $R$ and $C$ all increased after passivation and the increase of C contributes to the decrease of the noise figure. It was found that the improved microwave small signal and noise performance is mainly due to the increase of the intrinsic transconductance $(g_{{rm m}0})$ and the decrease of the extrinsic source resistance $(R_{rm s})$.      

AlN/GaN Insulated-Gate HEMTs With 2.3 A/mm Output Current and 480 mS/mm Transconductance

High-electron mobility transistors (HEMTs) based on ultrathin AlN/GaN heterostructures with a 3.5-nm AlN barrier and a 3-nm $hbox{Al}_{2}hbox{O}_{3}$ gate dielectric have been investigated. Owing to the optimized AlN/GaN interface, very high carrier mobility $(sim!!hbox{1400} hbox{cm}^{2}/hbox{V}cdothbox{s})$ and high 2-D electron-gas density $(sim!!kern1pthbox{2.7} times hbox{10}^{13} /hbox{cm}^{2})$ resulted in a record low sheet resistance $(sim !!hbox{165} Omega/hbox{sq})$. The resultant HEMTs showed a maximum dc output current density of $simkern1pt$2.3 A/mm and a peak extrinsic transconductance $g_{m,{rm ext}} sim hbox{480} hbox{mS/mm}$ (corresponding to $g_{m,{rm int}} sim hbox{1} hbox{S/mm}$). An $f_{T}/f_{max}$ of 52/60 GHz was measured on $hbox{0.25} times hbox{60} muhbox{m}^{2}$ gate HEMTs. With further improvements of the ohmic contacts, the gate dielectric, and the lowering of the buffer leakage, the presented results suggest that, by using AlN/GaN heterojunctions, it may be possible to push the performance of nitride HEMTs to current, power, and speed levels that are currently unachievable in AlGaN/GaN technology.      

High-Performance 0.1-$muhbox{m}$ Gate AlGaN/GaN HEMTs on Silicon With Low-Noise Figure at 20 GHz

The realization of high-performance 0.1-$muhbox{m}$ gate AlGaN/GaN high-electron mobility transistors (HEMTs) grown on high-resistivity silicon substrates is reported. Our devices feature cutoff frequencies as high as $f_{T} = hbox{75} hbox{GHz}$ and $f_{rm MAX} = hbox{125} hbox{GHz}$, the highest values reported so far for AlGaN/GaN HEMTs on silicon. The microwave noise performance is competitive with results achieved on other substrate types, such as sapphire and silicon carbide, with a noise figure $F = hbox{1.2}{-}hbox{1.3} hbox{dB}$ and an associated gain $G_{rm ass} = hbox{8.0}{-}hbox{9.5} hbox{dB}$ at 20 GHz. This performance demonstrates that GaN-on-silicon technology is a viable alternative for low-cost millimeter-wave applications.      

Reduced Nonlinear Microwave Effects in YBaCuO Resonators on a Polarized $hbox{SrTiO}_{3}$ Thin Layer

The combination of oxides may yield the elaboration of heterostructures with new or multifunctional properties. With such a philosophy, YBaCuO superconducting thin films were grown on top of a thin $hbox{SrTiO}_{3}$ paraelectric layer to observe the interaction between their respective microwave nonlinearities. The $hbox{SrTiO}_{3}$ layer was characterized by measuring the quality factor $(Q_{0})$ of slot meander line resonators at 6 GHz and 77 K. DC biasing the paraelectric significantly improves the resonator linear and nonlinear response. This paper shows how the saturation of the nonlinear dielectric constant $(varepsilon_{r})$ and loss tangent $(tandelta)$ in the paraelectric reduces the nonlinearities.      

1580-V–40-$hbox{m}Omegacdot hbox{cm}^{2}$ Double-RESURF MOSFETs on 4H-SiC $(hbox{000}bar{hbox{1}})$

Double-reduced-surface-field (RESURF) MOSFETs with $hbox{N}_{2}hbox{O}$ -grown oxides have been fabricated on the 4H-SiC $(hbox{000} bar{hbox{1}})$ face. The double-RESURF structure is effective in reducing the drift resistance, as well as in increasing the breakdown voltage. In addition, by utilizing the 4H-SiC $(hbox{000}bar{hbox{1}})$ face, the channel mobility can be increased to over 30 $hbox{cm}^{2}/hbox{V}cdothbox{s}$, and hence, the channel resistance is decreased. As a result, the fabricated MOSFETs on 4H-SiC $( hbox{000}bar{hbox{1}})$ have demonstrated a high breakdown voltage $(V_{B})$ of 1580 V and a low on-resistance $(R_{rm ON})$ of 40 $hbox{m}Omega cdothbox{cm}^{2}$. The figure-of-merit $(V_{B}^{2}/R_{rm ON})$ of the fabricated device has reached 62 $hbox{MW/cm}^{2}$, which is the highest value among any lateral MOSFETs and is more than ten times higher than the “Si limit.”      

Performance Improvement of N-Type $hbox{TiO}_{x}$ Active-Channel TFTs Grown by Low-Temperature Plasma-Enhanced ALD

We report on performance improvement of $n$-type oxide–semiconductor thin-film transistors (TFTs) based on $hbox{TiO}_{x}$ active channels grown at 250 $^{circ}hbox{C}$ by plasma-enhanced atomic layer deposition. TFTs with as-grown $hbox{TiO}_{x}$ films exhibited the saturation mobility $(mu_{rm sat})$ as high as 3.2 $hbox{cm}^{2}/hbox{V}cdothbox{s}$ but suffered from the low on–off ratio $(I_{rm ON}/I_{rm OFF})$ of $hbox{2.0} times hbox{10}^{2}$. $hbox{N}_{2}hbox{O}$ plasma treatment was then attempted to improve $I_{rm ON}/I_{rm OFF}$. Upon treatment, the $hbox{TiO}_{x}$ TFTs exhibited $I_{rm ON}/I_{rm OFF}$ of $hbox{4.7} times hbox{10}^{5}$ and $mu_{rm sat}$ of 1.64 $hbox{cm}^{2}/hbox{V}cdothbox{s}$, showing a much improved performance balance and, thus, demonstrating their potentials for a wide variety of applications such as backplane technology in active-matrix displays and radio-frequency identification tags.      

A 1 V 23 GHz Low-Noise Amplifier in 45 nm Planar Bulk-CMOS Technology With High-$Q$ Above-IC Inductors

A 23 GHz electrostatic discharge-protected low-noise amplifier (LNA) has been designed and implemented by 45 nm planar bulk-CMOS technology with high-$Q$ above-IC inductors. In the designed LNA, the structure of a one-stage cascode amplifier with source inductive degeneration is used. All high- $Q$ above-IC inductors have been implemented by thin-film wafer-level packaging technology. The fabricated LNA has a good linearity where the input 1 dB compression point $({rm IP}_{{-}1~{rm dB}})$ is ${- 9.5}~{rm dBm}$ and the input referred third-order intercept point $(P _{rm IIP3})$ is ${+ 2.25}~{rm dBm}$. It is operated with a 1 V power supply drawing a current of only 3.6 mA. The fabricated LNA has demonstrated a 4 dB noise figure and a 7.1 dB gain at the peak gain frequency of 23 GHz, and it has the highest figure-of-merit. The experimental results have proved the suitability of 45 nm gate length bulk-CMOS devices for RF ICs above 20 GHz.      

$hbox{TiN/ZrO}_{2}$/Ti/Al Metal–Insulator–Metal Capacitors With Subnanometer CET Using ALD-Deposited $hbox{ZrO}_{2}$ for DRAM Applications

We provide the first report of the structural and electrical properties of $hbox{TiN/ZrO}_{2}$/Ti/Al metal–insulator–metal capacitor structures, where the $hbox{ZrO}_{2}$ thin film (7–8 nm) is deposited by ALD using the new zirconium precursor ZrD-04, also known as Bis(methylcyclopentadienyl) methoxymethyl. Measured capacitance–voltage ($C$– $V$) and current–voltage ( $I$–$V$) characteristics are reported for premetallization rapid thermal annealing (RTP) in $hbox{N}_{2}$ for 60 s at 400 $^{circ}hbox{C}$, 500 $^{circ}hbox{C}$, or 600 $^{ circ}hbox{C}$. For the RTP at 400 $^{circ}hbox{C}$ , we find very low leakage current densities on the order of nanoamperes per square centimeter at a gate voltage of 1 V and low capacitance equivalent thickness values of $sim$ 0.9 nm at a gate voltage of 0 V. The dielectric constant of $ hbox{ZrO}_{2}$ is 31 $pm$ 2 after RTP treatment at 400 $^{circ}hbox{C}$.      

$N times N$ Cyclic-Frequency Router With Improved Performance Based on Arrayed-Waveguide Grating

We have developed an $N times N$ cyclic-frequency router with improved performance by employing two types of modified configuration; a uniform-loss and cyclic-frequency (ULCF) arrayed-waveguide grating (AWG) and an interconnected multiple AWG. We have demonstrated a compact 50-GHz-spacing 64 $,times,$64 ULCF-AWG router with low and uniform insertion losses of 5.4–6.8 dB and frequency deviations from the grid of less than $pm {8}~{rm GHz}$. We have also demonstrated a 100-GHz-spacing 8$,times,$8 interconnected multiple-AWG router with a practical configuration, very low and uniform insertion losses of 2.3–3.4 dB, and frequency deviations from the grid of less than $pm {6}~{rm GHz}$. We discuss the suitable or realizable scale $N$ of the two types of routers by comparison with a conventional AWG router in terms of optical and dimensional performance and productivity.      

Impacts of $hbox{N}_{2}$ and $hbox{NH}_{3}$ Plasma Surface Treatments on High-Performance LTPS-TFT With High-$kappa$ Gate Dielectric

Low-temperature polycrystalline-silicon thin-film transistors (LTPS-TFTs) with high- $kappa$ gate dielectrics and plasma surface treatments are demonstrated for the first time. Significant field-effect mobility $mu_{rm FE}$ improvements of $sim$86.0% and 112.5% are observed for LTPS-TFTs with $hbox{HfO}_{2}$ gate dielectric after $hbox{N}_{2}$ and $ hbox{NH}_{3}$ plasma surface treatments, respectively. In addition, the $hbox{N}_{2}$ and $ hbox{NH}_{3}$ plasma surface treatments can also reduce surface roughness scattering to enhance the field-effect mobility $mu_{rm FE}$ at high gate bias voltage $V_{G}$, resulting in 217.0% and 219.6% improvements in driving current, respectively. As a result, high-performance LTPS-TFT with low threshold voltage $V_{rm TH} sim hbox{0.33} hbox{V}$, excellent subthreshold swing S.S. $sim$0.156 V/decade, and high field-effect mobility $mu_{rm FE} sim hbox{62.02} hbox{cm}^{2}/hbox{V} cdot hbox{s}$ would be suitable for the application of system-on-panel.      

14-GHz GaNAsSb Unitraveling-Carrier 1.3-$muhbox{m}$ Photodetectors Grown by RF Plasma-Assisted Nitrogen Molecular Beam Epitaxy

We report on picosecond pulsed response and 3-dB cutoff frequency of 1.3-$ muhbox{m}$ GaNAsSb unitraveling-carrier photodetectors (PDs) grown by molecular beam epitaxy using a radio-frequency plasma-assisted nitrogen source. The 0.1-$muhbox{m}$ -thick GaNAsSb photoabsorption layer contains 3.5% of N and 9% of Sb, resulting in a bandgap of 0.88 eV. The dark current densities at 0 and $-$9 V are 6 and 34 $hbox{mA}/hbox{cm}^{2}$, respectively. The GaNAsSb UTC PDs exhibit a temporal response width of 46 ps and a record 3-dB cutoff frequency of 14 GHz at $-$9 V.      

Performance of $n$-Type InSb and InAs Nanowire Field-Effect Transistors

The electronic structure of highly scaled InSb and InAs nanowire (NW) field-effect transistors (FETs) is calculated with an eight-band ${bf k} cdot {bf p}$ model. Cross sections of 4 nm or less result in bandgaps of 0.8 eV or more. For these cross sections, all devices are single moded and operate in the quantum capacitance limit. Analytical expressions for the transconductance, cutoff frequency, and gate delay time are presented and compared to numerical results. The dependence of the intrinsic cutoff frequency on drive current is weak, scaling as $sqrt{I_{D}}$ with values in the 4–7 THz range that are good for RF applications. The gate delay times strongly depend on the drive current, scaling as $I_{D}^{-3/2}$ with values ranging from 25 to 132 fs which are competitive for digital applications.      

Zn$_{1 - x}$Mg$_{x}$ O Homojunction-Based Ultraviolet Photodetector

Zn$_{1 - {x}}$ Mg$_{x}$ O p-n photodiodes were fabricated on (0001) sapphire substrates using a pulsed laser deposition technique with different Mg contents. Ti–Au and Ni–Au metals deposited using vacuum evaporation were used as n-type and p-type contacts, respectively. The X-ray diffraction analysis showed the Zn$_{1 - {x}}$Mg$_{x}$O double layers have a single phase hexagonal wurtzite structure. The optical bandgap of Zn$_{1 - {x}}$Mg$_{x}$O films has been tuned from 3.27 to 4.26 eV by increasing the Mg content ${x} =0.0$ to ${x}=0.34$. Correspondingly, the cutoff wavelength of the resultant detectors varies from 380 to 284 nm. Zn$_{1 - {x}}$Mg$_{x}$O p-n photodiodes with different Mg contents exhibit very good performance, with a very low dark current (${≪}$ 20 pA) at the bias voltage of 10 V. The ultraviolet to visible rejection ratio is more than three orders of magnitude.      

A $Q$ -Band Four-Element Phased-Array Front-End Receiver With Integrated Wilkinson Power Combiners in 0.18-$mu{{hbox{m}}}$ SiGe BiCMOS Technology

A four-element phased-array front-end receiver based on 4-bit RF phase shifters is demonstrated in a standard 0.18- $mu{{hbox{m}}}$ SiGe BiCMOS technology for $Q$-band (30–50 GHz) satellite communications and radar applications. The phased-array receiver uses a corporate-feed approach with on-chip Wilkinson power combiners, and shows a power gain of 10.4 dB with an ${rm IIP}_{3}$ of $-$13.8 dBm per element at 38.5 GHz and a 3-dB gain bandwidth of 32.8–44 GHz. The rms gain and phase errors are $leq$1.2 dB and $leq {hbox{8.7}}^{circ}$ for all 4-bit phase states at 30–50 GHz. The beamformer also results in $leq$ 0.4 dB of rms gain mismatch and $leq {hbox{2}}^{circ}$ of rms phase mismatch between the four channels. The channel-to-channel isolation is better than $-$35 dB at 30–50 GHz. The chip consumes 118 mA from a 5-V supply voltage and overall chip size is ${hbox{1.4}}times {hbox{1.7}} {{hbox{mm}}}^{2}$ including all pads and CMOS control electronics.      

Breakdown Enhancement of AlGaN/GaN HEMTs on 4-in Silicon by Improving the GaN Quality on Thick Buffer Layers

We have achieved a 9- $muhbox{m}$-thick AlGaN/GaN high-electron mobility transistor (HEMT) epilayer on silicon using thick buffer layers with reduced dislocation density $(D_{D})$. The crack-free 9- $muhbox{m}$-thick epilayer included 2- $muhbox{m}$ i-GaN and 7- $ muhbox{m}$ buffer. The HEMTs fabricated on these devices showed a maximum drain–current density of 625 mA/mm, transconductance of 190 mS/mm, and a high three-terminal OFF breakdown of 403 V for device dimensions of $L_{g}/W_{g}/L_{rm gd} = hbox{1.5/15/3} muhbox{m}$ . Without using a gate field plate, this is the highest $BV$ reported on an AlGaN/GaN HEMT on silicon for a short $L_{rm gd}$ of 3 $muhbox{m}$. A very high $BV$ of 1813 V across 10- $mu hbox{m}$ ohmic gap was achieved for i-GaN grown on thick buffers. As the thickness of buffer layers increased, the decreased $D_{D}$ of GaN and increased resistance between surface electrode and substrate yielded a high breakdown.      

Integrated Hydrogen-Sensing Amplifier With GaAs Schottky-Type Diode and InGaP–GaAs Heterojunction Bipolar Transistor

New hydrogen-sensing amplifiers are fabricated by integrating a GaAs Schottky-type hydrogen sensor and an InGaP–GaAs heterojunction bipolar transistor. Sensing collector currents ( $I_{rm CN}$ and $I_{rm CH}$) reflecting to $hbox{N}_{2}$ and hydrogen-containing gases are employed as output signals in common-emitter characteristics. Gummel-plot sensing characteristics with testing gases as inputs show a high sensing-collector-current gain $(I_{rm CH}/I_{rm CN})$ of $≫hbox{3000}$. When operating in standby mode for in situ long-term detection, power consumption is smaller than 0.4 $muhbox{W}$. Furthermore, the room-temperature response time is 85 s for the integrated hydrogen-sensing amplifier fabricated with a bipolar-type structure.      

Thermal Properties of Ultrathin Hafnium Oxide Gate Dielectric Films

Thin-film $hbox{HfO}_{2}$ is a promising gate dielectric material that will influence thermal conduction in modern transistors. This letter reports the temperature dependence of the intrinsic thermal conductivity and interface resistances of 56–200- $hbox{rm{AA}}$-thick $ hbox{HfO}_{2}$ films. A picosecond pump–probe thermoreflectance technique yields room-temperature intrinsic thermal conductivity values between 0.49 and 0.95 $ hbox{W}/(hbox{m}cdot hbox{K})$. The intrinsic thermal conductivity and interface resistance depend strongly on the film-thickness-dependent microstructure.      

$S$ - and $C$ -Band Ultra-Compact Phase Shifters Based on All-Pass Networks

Ultra-compact phase shifters are presented. The proposed phase-shifting circuits utilize the lumped element all-pass networks. The transition frequency of the all-pass network, which determines the size of the circuit, is set to be much higher than the operating frequency. This results in a significantly small chip size of the phase shifter. To verify this methodology, 5-bit phase shifters have been fabricated in the $S$ - and $C$ -band. The $S$ -band phase shifter, with a chip size of 1.87 mm $,times,$0.87 mm (1.63 mm $^{2}$), has achieved an insertion loss of ${hbox{6.1 dB}} pm {hbox{0.6 dB}}$ and rms phase-shift error of less than 2.8$^{circ}$ in 10% bandwidth. The $C$ -band phase shifter, with a chip size of 1.72 mm $,times,$0.81 mm (1.37 mm $^{2}$), has demonstrated an insertion loss of 5.7 dB $pm$ 0.8 dB and rms phase-shift error of less than 2.3 $^{circ}$ in 10% bandwidth.