Polyimides from a Novel Monomer 3,6-Bis(dimethylamino)acridine(p-cymene)dichlororuthenium(II) for a Catalytic Application

Tricyclic heteroaraomatic dye-based monomer containing NMe₂ units, 6-bis(dimethylamino)acridine(p-cymene)dichlororuthenium (II), was used to prepare novel polyimides via a one-stage solution polycondensation due to their stability under a variety of oxidative and reductive conditions. The Ru(II) complex monomer was synthesized starting from [RuCl₂(p-cymene)]₂ and 3,6-bis(dimethylamino)acridine. A series of stable polyimides was synthesized from the Ru(II) complex of 3,6-bis(dimethylamino)acridine and various aromatic dianhyrides. The polymers had inherent viscosities ranging from 1.72 to 2.11 dL/g and were soluble in polar solvents. The glass transition temperatures were 192–278 °C, and the 10% weight loss temperatures were above 503–635 °C. Ruthenium-substituted polyimides were tested for catalytic activity in the furan formation reaction of (Z)-3-methylpent-2-en-4-yn-1-ol. The polymeric catalyst was added to (Z)-3-methylpent-2-en-4-yn-l-ol without a solvent and the pure furan was isolated by distillation under reduced pressure. The conversion of the starting, enynol, was determined by gas chromatography (GC).     

Synthesis of New Polyimides from Ru (II) Complex of 2,6-bis [1-(p-dimethylaminophenylimino) Ethyl] Pyridine

Pyridine-based tridentate ligand containing pendant NMe₂ unit was used to prepare novel polyimides via one-stage solution polycondensation due to their stability under a variety of oxidative and reductive conditions. Ru (II) complex of the pydim ligand was synthesized starting from [RuCl₂ (p-cymene)]₂ and 2,6-bis [1-(p-dimethylaminophenylimino) ethyl] pyridine. A series of stable polyimides were synthesized from Ru (II) complex of 2,6-bis [1-(p-dimethylaminophenylimino) ethyl] pyridine (2) and various aromatic dianhyrides had inherent viscosities ranging from 1.31 to 1.55 dL/g and were soluble in polar solvents. The glass transition temperatures were 245–308°C, and the 10% weight loss temperatures were above 482–548°C.     

Synthesis and characterization of copolymers with alternating 1,4-bis(5'-acetyl-2'-thienyl)benzene or 1,3-bis(5'-acetyl-2'-thienyl)benzene chromophore and disiloxane units

Summary Activated (Ph₃P)₃RuH₂CO (Ru) catalyzed copolymerization of 1,4-bis(5'-acetyl-2'-thienyl)benzene (I) and 1,3-divinyltetramethyldisiloxane (II) yields alt-copoly[3,3,5,5-tetramethyl-4-oxa-3,5-disila-1,7-heptanylene/2',2"-diacetyl-5',5"-(1,4-benzene)-3',3"-bis (thiophenylene)] (III). On the other hand, Ru catalyzed copolymerization of 1,3-bis(5'-acetyl-2'-thienyl)benzene (IV) and II fails. Nevertheless, Ru catalyzed reaction of IV with excess vinylpentamethyldisiloxane (V) yields 1,3-bis(4'-pentamethyldisiloxy-ethyl-5'-acetyl-2'-thienyl)benzene (VI). VI undergoes acid catalyzed siloxane equilibration polymerization to give alt-copoly[3,3,5,5-tetramethyl-4-oxa-3,5-disila-1,7-heptanylene/2',2"-diacetyl-5',5"-(1,3-benzene)-3',3"-bis(thiophenylene)] (VII) and hexamethyldisiloxane. Copolymers III and VII have been characterized. Received: 26 July 1999/Revised version: 12 October 1999/Accepted: 12 October 1999     

Synthesis and photodegradation of poly[2,5-bis(dimethylsilyl)furan]

Summary Poly[2,5-bis(dimethylsilyl)furan] (V), a copolymer with alternating furan and disilyl units, has been prepared by the Wurtz coupling of 2,5-bis(dimethylchlorosilyl)furan (II) with sodium metal dispersion in toluene. Lower molecular weight poly[2,5-bis(dimethylsilyl)furan] (IV) has been prepared by a similar condensation reaction with 2,5-bis(dimethylfluorosilyl)furan (III). IV and V have been characterized by ¹H, ¹³C and ²⁹Si NMR, IR, and UV spectroscopy as well as by GPC, TGA and elemental analysis. Photolysis of V in a benzene/methanol solution results in degradation of the polymer.     

Characterization of Volatile Organic Compounds Emitted by Barley (Hordeum vulgare L.) Roots and Their Attractiveness to Wireworms

Root volatile organic compounds (VOCs), their chemistry and ecological functions have garnered less attention than aboveground emitted plant VOCs. We report here on the identification of VOCs emitted by barley roots (Hordeum vulgare L.). Twenty nine VOCs were identified from isolated 21-d-old roots. The detection was dependent on the medium used for root cultivation. We identified 24 VOCs from 7-d-old roots when plants were cultivated on sterile Hoagland gelified medium, 33 when grown on sterile vermiculite, and 34 on non-sterile vermiculite. The major VOCs were fatty acid derived compounds, including hexanal, methyl hexanoate, (E)-hex-2-enal, 2-pentylfuran, pentan-1-ol, (Z)-2-(pentenyl)-furan, (Z)-pent-2-en-1-ol, hexan-1-ol, (Z)-hex-3-en-1-ol, (E)-hex-2-en-1-ol, oct-1-en-3-ol, 2-ethylhexan-1-ol (likely a contaminant), (E)-non-2-enal, octan-1-ol, (2E,6Z)-nona-2,6-dienal, methyl (E)-non-2-enoate, nonan-1-ol, (Z)-non-3-en-1-ol, (E)-non-2-en-1-ol, nona-3,6-dien-1-ol, and nona-2,6-dien-1-ol. In an olfactometer assay, wireworms (larvae of Agriotes sordidus Illiger, Coleoptera: Elateridae) were attracted to cues emanating from barley seedlings. We discuss the role of individual root volatiles or a blend of the root volatiles detected here and their interaction with CO₂ for wireworm attraction.     

Palladium(II) complexes bearing the new pincer ligand 3,5-bis(indazol-2-ylmethyl)toluene; synthesis and catalytic properties

The reaction of 3,5-bis(bromomethyl)toluene with 1H-indazole in toluene, in the presence of triethylamine, yields the ligand 3,5-bis(indazol-2-ylmethyl)toluene (1). Compound 1 reacts with Pd(OAc)₂ in refluxing acetic acid, followed by a metathetic reaction with lithium chloride and with [PdCl₂(cod)] (cod = 1,5-cyclooctadiene) in refluxing acetonitrile to give the complexes [PdCl{3,5-bis(indazol-2-ylmethyl)tolyl-N,C,N}] (2) and [PdCl₂{3,5-bis(indazol-2-ylmethyl)toluene-N,N}] (3), respectively. Compounds 1–3 were characterized by elemental analyses, mass spectra and IR and NMR (¹H, ¹³C) spectroscopies. The molecular structure of 1 was also determined by single-crystal X-ray diffraction. The palladium(II) complexes (2,3) were tested as catalysts in ethylene polymerization and in C–C coupling reactions involving aryl halides substrates.     

Arene ruthenium(II) p-chloroacetophenone phenylthiosemicarbazone complex mediated transfer hydrogenation of ketones

A series of cationic half-sandwich arene ruthenium(II) complexes of general formula [Ru(η⁶-p-cymene)Cl(L)]Cl have been synthesized from the reaction of [Ru(η⁶-p-cymene)Cl₂]₂ with thiosemicarbazone derivatives (L). Characterization of the complexes were accomplished by analytical and spectral (FT-IR, UV–Vis, ¹H NMR) methods. Single crystal structure determination reveals the presence of a pseudooctahedral three-legged piano stool conformation. All the complexes exhibit a quasi-reversible one electron reduction in the range from ?0.75 to ?0.85 V. Further, the catalytic activity of the titled complex has been investigated in the transfer hydrogenation of ketones in the presence of isopropanol/NaOH.     

Synthesis of some new polyers and copolymers from 2,2-bis (4-chlorophenyl) 1, 1, 1-trichloro ethane (DDT)

DDT (I) was polycondensed with 2,2-bis(4-hydroxy phenyl)- propane (bisphenol-A) to form polyether. The following monomers were synthesised from DDT: 2,2-bis(4-chloro-phenyl)1, 1-dichloroethylene(II), 2,2-bis(3-nitro-4-chlorophenyl)ethane (III) and 2,2-bis (3-nitro-4-chloro-phenylethylene (IV) and polycondensed with bisphenol-A. They were also copolymerised with bis(4-chlorophenyl)sulphone and bisphenol-A in several molar ratios. The polymers and copolymers were characterised by various techniques. The results obtained show that the DDT has a low reactivity, but nitration and dehydrochlorin-ation increases its reactivity to a significant extent.     

Synthesis, Crystal Structure and Magnetic Properties of a Nickel(II) Coordination Polymer Based the V-Shaped Ligands

Abstract  

A new nickel(II) coordination polymer, Ni₂(DBA)₂(BIDPE)₂(H₂O) (1) (H₂DBA = 4,4′-methylenedibenzoic acid and BIDPE = 4,4′-bis(imidazole-l-yl)diphenyl ether), has been prepared by hydrothermal synthesis and structurally characterized by IR, elemental analysis, TGA and single crystal X-ray diffraction. Complex 1 features a one-dimensional chain structure based on triply bridged binuclear units, which is further interlinked into a higher-dimensional supramolecular framework by intermolecular weak interactions. Variable-temperature magnetic data shows weak antiferromagnetic behavior in 1.     

Preparation and Characterization of Novel Polyimides from 2,6-bis[1-(p-dimethylaminophenylimino)ethyl] pyridine for the Selective Extraction of some Metals

Summary A group of new polyimides has been prepared by solution condensation of 2,6-bis[1-(p-dimethylaminophenylimino)ethyl] pyridine containing pendant NMe₂ units and various dianhyrides in N-methylpyrrolidone (NMP). The tridentate (N-N′-N) pydim ligands were prepared by Schiff-base condensation of 2,6-diacetylpyridine and 4-dimethylaminoaniline in the presence of formic acid as catalyst. These polymers were investigated for their extraction capabilities for Zn(II), Mn(II), Cu(II), Cd (II) and Ni(II) and at different pH. Under different conditions enhanced selectivity was observed. Up to 98% quantitative recoveries were observed for all metals.     

Gas permeability of polyimides and polypyrrolone derived from 2,2′-bis(p-trimellitoxyphenyl)hexafluoropropane dianhydride

The permeability coefficients for H₂, O₂, and N₂ in four polyimides and one polypyrrolone based on 2,2′-bis(p-trimellitoxyphenyl)hexafluoropropane dianhydride were determined at 30°C and 1 atm. Systematic variations in chemical structure were found to lead to significant changes in permeabilities and selectivities. The relationship between the chemical structure of the polymers, some of their physical properties (d-spa+ing, fractional free volume), and their gas permeability behavior are discussed. Introduction of 2 flexible segments tends to increase permeability but decrease selectivity. Structural moieties, which simultaneously inhibit chain packing and intrasegmental mobility, may increase permeability while maintaining selectivity. Temperature dependency of gas permeabilities was also reported for polypyrrolone. © 1996 John Wiley & Sons, Inc.     

Novel Type of Metal-Containing Polyimides for the Heck and Suzuki–Miyaura Cross-Coupling Reactions as Highly Active Catalysts

Novel palladium (II)-containing polyimides with exceptional catalytic properties for the Heck and Suzuki–Miyaura cross-coupling reactions were prepared from Pd(II)--bis(imine) complex and the corresponding dianhyrides. The glass transition temperatures (T _g ) of the polymers ranged from 169 to 241°C. The temperatures at which 10% weight loss occurred in air ranged from 415 to 579°C. Polyimides based on the palladium (II) complex were tested for catalytic activity in the Heck coupling reaction between styrene and several aryl halides and the Suzuki coupling reaction between phenylboronic acid and several aryl halides. The negative effects (e.g., expense, low reaction rates, air-sensitivity) experienced by using phosphines, particularly electron-rich phosphines, as catalysts in large scale applications is overcome by using polymer supported catalysis.     

Synthesis of Silica-Supported Platinum(II) and Nickel(II) Complexes of Bis(Diphenylphosphinomethyl)Amino Ligand: Applications as Catalysts for the Synthesis of 2-Methyl-1,4-Naphthoquinone (Vitamin K3)

Pt(II) and Ni(II) complexes of N,N-bis(diphenylphosphinomethyl)aminopropyltriethoxysilane [(CH₃CH₂O)₃Si(CH₂)₃N(CH₂PPh₂)₂] (DIPAPTES) and silica supported [SiO₂–(DIPAPES)] ligands have been synthesized under nitrogen atmosphere using Schlenk method and characterized by using atomic absorption, FT-IR, NMR (¹H and ³¹P) and elemental analysis techniques. All the complexes were used as catalysts for the oxidation of 2-methyl naphthalene (2MN) to 2-methyl-1,4-naphthoquinone (vitamin K₃, menadione, 2MNQ) using hydrogen peroxide as a clean and cheap oxidant. [Pt–(DIPAPTES)Cl₂] and supported complex [SiO₂–(DIPAPES)–PtCl₂] showed medium catalytic activity whereas Ni(II) complexes did not show any catalytic activity for the selective oxidation of 2-methyl naphthalene to 2-methyl-1,4-naphthoquinone.     

Quinolyl-Based PGM Metallarectangles: Antiproliferative Activity,DNA and BSA Protein Interactions,and a Molecular Docking Perspective

The increased success of small metal-containing molecules as pharmaceutical agents has prompted investigations into the pharmacological activity of a different class of metal-based compounds; supramolecular coordination complexes (SCCs). Such complexes have been extensively investigated for their anticancer activity, with many displaying activities comparable or superior to available clinical chemotherapeutic drugs. Here, we evaluated a series of quinoline-containing binuclear complexes and metallarectangles for their in vitro anticancer activity in the hormone receptor positive MCF-7 and triple negative MDA-MB-231 breast cancer cell lines. The preliminary cytotoxic screen, in the MCF-7 cell line, revealed that the ligand (7-chloro-4-(pyridin-4-yl)quinoline, L ) and metallarectangle [{Ir(μ-Cl)(Cp*)}₄(μ- L )₂](OTf)₄ display superior activity to cisplatin, while [{Ru(p-cymene)}₄(μ-η²-η²-C₂O₄)₂(μ- L )₂](OTf)₄ was more potent than cisplatin in the triple-negative MDA-MD-231 cell line. Upon evaluation in a multidose screen, ligand L and metallarectangle [{Ir(μ-Cl)(Cp*)}₄(μ- L )₂](OTf)₄ displayed antiproliferative activity almost two-fold greater than cisplatin in the MCF-7 cell line, while [{Ru(p-cymene)}₄(μ-η²-η²-C₂O₄)₂(μ- L )₂](OTf)₄ was over two-times more active than cisplatin in the MDA-MB-231 cell line. Additionally, using the non-tumorigenic MCF-12 A breast epithelial cell line, the compounds demonstrate increased selectivity toward breast cancer cells over non-tumorigenic cells. Furthermore, investigations into the interactions of ligand L and selected complexes with calf thymus DNA (CT-DNA) and bovine serum albumin (BSA) indicate favourable binding.     

Organosoluble, Low-Colored Fluorinated Polyimides Based on 1,1-Bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]-1-phenyl-2,2,2-trifluoroethane

A novel trifluoromethyl-substituted bis(ether amine) monomer, 1,1-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]-1-phenyl-2,2,2-trifluoroethane, was synthesized that led to a series of novel fluorinated polyimides via chemical imidization route when reacted with various commercially available aromatic tetracarboxylic dianhydrides. These polyimides were highly soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone and N,N -dimethylacetamide, and most of them could afford transparent, low-colored, and tough films. These polyimides exhibited glass-transition temperatures (T _gs) of 227–269 °C and showed no significant decomposition below 500 °C under either nitrogen or air atmosphere. These polyimides had low dielectric constants of 2.87–3.17 at 10 kHz, low water uptake of 0.13%–0.58%, and an ultraviolet-visible absorption cutoff wavelength at 364–410 nm. For a comparative study, a series of analogous polyimides based on 1,1-bis[4-(4-aminophenoxy)phenyl]-1-phenyl-2,2,2-trifluoroethane were also prepared and characterized.     

Synthesis and Properties of Polyimides from 1,3-di(p- dimethylamino benzyl)-imidazolidine-2-thion

Summary A synthetic strategy is presented that allows the preparation of dimethylamino functionalized heterocyclic system 1,3-di (p-dimethylaminobenzy1)-imidazolidine-2-thion that was then used to prepare polyimides by the two-stage polycondensation method. The key to this success was the development of an efficient procedure leading highly pure dimethylamino monomer. Polyimides derived from 1,3-di(p-dimethylaminobenzyl)-imidazolidine-2-thion and commercial dianhydrides exhibited excellent solubility in various polar solvents. These polymers showed glass transition temperatures between 290–360°C, and initial decomposition temperature 490–485 °C and 10% mass loss ranging from 505–75°C in air. Received: 17 April 2002/Revised version: 25 January 2003/ Accepted: 14 March 2003 Correspondence to Turgay Seckin     

Synthesis and photodegradation of poly[1,4-bis(dimethylsilyl)naphthalene]

Summary Poly[1,4-bis(dimethylsilyl)naphthalene](I), a copolymer with alternating 1,4-naphthalene and disilyl units, has been prepared by the Wurtz coupling of 1,4-bis(dimethylchlorosilyl) naphthalene (II) or 1,4-bis(dimethylfluorosilyl)naphthalene (III) with sodium metal dispersion in toluene. The molecular weight distribution of I prepared from III is significantly higher than when I is prepared from II. I has been characterized by ¹H, ¹³C and ²⁹Si NMR, IR, UV, GPC, TGA and elemental analysis. Photolysis of I in benzene/methanol solution results in rapid degradation of I.     

Synthesis and Properties of Novel Selenium containing Polyimides with Various Dianhydrides

Novel selenium-containing polyimides were prepared from bis(1,3-di-p-dimethylaminobenzylpyrimidine- 2-selenon) and bis(1,3-di-p-dimethylaminobenzyldiazepane-2-selenon) and with various aromatic dianhydrides in a one-stage polycondensation at high temperature in N-methyl-2-pyrrolidone. The polyimides have inherent viscosities that range from 1.55 to 2.05 dL/g in NMP at 30°C. These polymers showed glass transition temperatures between 188 and 268°C, and an initial decomposition temperature from 421 to 502°C with a 10% mass loss occurring from 480 to 547°C in air.     

Identification of Sex Pheromone Components of a New Zealand Geometrid Moth, the Common Forest Looper Pseudocoremia suavis, Reveals a Possible Species Complex

Gas chromatography–electroantennographic detection analysis of sex pheromone gland extracts of the common forest looper Pseudocoremia suavis (Lepidoptera: Geometridae), a polyphagous defoliator of introduced Pinaceae and many New Zealand trees, revealed four compounds that elicited antennal responses. The two major active compounds (6Z)-cis-9,10-epoxynonadec-6-ene and (3Z,6Z)-cis-9,10-epoxynonadeca-3,6-diene were identified by comparison with known standards. Of the two minor active compounds, one was tentatively identified as (3Z,6Z)-cis-9,10-epoxyhenicosa-3,6-diene, whereas the other could not be identified because of insufficient amounts in extracts. (6Z)-cis-9,10-Epoxynonadec-6-ene, (3Z,6Z)-cis-9,10-epoxynonadeca-3,6-diene, and (3Z,6Z)-cis-9,10-epoxyhenicosa-3,6-diene were present in P. suavis gland extracts from Eyrewell Forest, a Pinus radiata plantation in the South Island of New Zealand, in a ratio of 35:65:5, respectively. Trapping trials in Eyrewell Forest established that (6Z)-cis-9,10-epoxynonadec-6-ene attracted male P. suavis. However, addition of (3Z,6Z)-cis-9,10-epoxyhenicosa-3,6-diene to the lure at <10% of (6Z)-cis-9,10-epoxynonadec-6-ene reduced capture of male moths, suggesting that one of its enantiomers was acting as a behavioral antagonist. During January–March of 2005, a blend trial involving single, binary, and ternary mixtures of the three components at Eyrewell Forest and at three other sites (two in the South Island and one in the North Island) revealed the existence of a second taxon of P. suavis at the three additional sites that was attracted to lures containing (3Z,6Z)-cis-9,10-epoxynonadeca-3,6-diene, either singly or in binary and ternary mixtures with (6Z)-cis-9,10-epoxynonadec-6-ene and (3Z,6Z)-cis-9,10-epoxyhenicosa-3,6-diene. This second taxon was not attracted to lures loaded solely with (6Z)-cis-9,10-epoxynonadec-6-ene.     

Synthesis, characterization and crystal structure of a novel thiocyanate–ruthenium(II) complex

The cis-[Ru(dppb)(Me-bipy)(NCS)₂], dppb = 1,4-bis (diphenylphosphino)butane, Me-bipy = 4,4′-dimethyl-2,2′-bipyridine, and NCS = thiocyanate, was synthesized and characterized by spectroscopic and electrochemical techniques and its structure was determined by crystal X-ray analysis. The crystal structure reveals that the coordination geometry around the Ru(II) center is distorted octahedron where two molecules of thiocyanate are bonded to the ruthenium through nitrogen atom in cis orientation. The half-wave formal potential value E_1/2 = 0.8 V (versus Ag/AgCl) observed is considerable higher than that for the cis-[RuCl₂(dppb)(Me-bipy)] complex, E_1/2 = 0.6 V (versus Ag/AgCl), well illustrating the strong π-acceptor effect the NCS ligand toward the backbonding interaction with the Ru(II) metal center. The MLCT absorption bands of the thiocyanate complex present a higher molar absorptivity (about 12%) compared with the cis-[RuCl₂(dppb)(Me-bipy)] complex, in the same experimental conditions. These properties make the complex potentially promising for the photosensitization process.