Enhanced afterglow performance of CaAl_2O_4:Eu~(2+),Nd~(3+) phosphors by co-doping Gd~(3+)

In order to effectively improve the afterglow properties of CaAl_2 O_4:Eu~(2+),Nd~(3+) phosphors,a series of Ca_(0.982-x)Al_2 O_4:0.012 Eu~(2+),0.006 Nd~(3+),xGd~(3+)(x=0,0.012,0.024,0.036,0.048,0.060 mol) phosphors were prepared by a high-temperature solid-phase approach.Crystalline composition and microstructure were characterized by XRD,TEM,HRTEM,and XPS,luminescence properties were systematically analyzed by fluorescence spectra,afterglow decay curves and TL glow curve.Results show that all of Ca_(0.982-x)Al_2 O_4:0.012 Eu~(2+),0.006 Nd~(3+),xGd~(3+)phosphors belong to monoclinic CaAl_2 O_4,without other cystalline phase.The blue emission at 442 nm is observed,which is assigned to the 4 f~65 d→4 f~7 transition of Eu~(2+) ions.Doping with appropriate amount of Gd~(3+) ions(x=0.036 mol) significantly improves the afterglow properties of phosphors,but the excessive doping of Gd~(3+) induces the fluorescent quenching.The doping of moderate Gd3+changes the traps states,the trap depth varies from 0.598 to 0.644 eV and the trap concentration is also greatly improved,thus significantly improving afterglow performance.     

Synthesis and luminescence properties of a novel red-emitting phosphor SrCaSiO_4：Eu~（3＋） for ultraviolet white light-emitting diodes

A novel red phosphor based on Eu3+-activated SrCaSiO4 was successfully synthesized by conventional solid state reaction method and the photoluminescence properties were investigated. X-ray diffraction (XRD) patterns indicated that SrCaSiO4:Eu3+ phosphors belong to orthorhombic crystal system (space group=Pmnb). The photoluminescence (PL) excitation spectrum showed broad-band absorption and the strongest excitation peak at 397 nm contributed to the 7F0→5L6 transition which matched well with the emission of a...     

A potential red-emitting phosphor Ca_2YTaO_6:Eu~(3+):Luminescence properties,thermal stability and applications for white LEDs

A novel red-emitting phosphor tantalate Ca_2 YTaO_6:Eu~(3+)was synthesized by a solid-state reaction.The purity and surface morphology of the phosphors were characterized.The Ca_2 YTaO_6:Eu~(3+)phosphors show a sharp emission peak at 612 nm under near-ultraviolet(n-UV) at 395 nm because of the ~5 D_0→~7 F_2 transition of Eu3+.The optimal Eu3+doping concentration in Ca2 YTaO_6 is 40 mol% and the critical energy-transfer distance of Eu3+ions was calculated to be 0.9 nm.The emission spectra of Ca_2 YTaO_6:Eu3+from 300 to 480 K were investigated.The thermal-quenching temperature(T_(0.5)) of Ca_2 YTaO_6:Eu~(3+)is above 480 K.The color purity of Ca_2 YTaO_6:40 mol%Eu3+is as high as 99.8%.The luminescence lifetime of Ca_2 YTaO_6:40 mol%Eu~(3+)was also discussed.The high color purity and high thermal stability of Eu~(3+)-doped Ca2 YTaO6 phosphors contribute to its application value in white lightemitting diodes(w-LEDs).     

A new resource-rich carbonate luminescent host KNa_5Ca_5(CO_3)_8:A case study activated by Eu~(3+) for red-phosphor purpose

Exploring and designing new luminescent host with rich resource is beneficial to reducing the cost and the large-scale application of luminescent materials.Herein,a series of novel Eu~(3+)-activated KNa_(5-)Ca_5(CO_3)_8 red-emitting phosphors with different Eu~(3+) concentrations were successfully synthesized under mild hydrothermal condition.XRD and SEM characterizations show that all as-prepared KNa_5 Ca_5(CO_3)_8:Eu~(3+) samples crystallize in a hexagonal structure,P63 mc(No.186) space group,and show monodispersed hexagonal sheet mo rphologies,within a side length interval about of 2-3μm and a thickness of about 0.6 μm,Eu~(3+) doping within 6 mol% concentration has little influence on the crystal structure of the host,as indicated by XRD,and FT-IR results,but thermal stability changes as shown by the TG-DTA.KNa_5 Ca_5(CO_3)_8 phosphors with different Eu~(3+) concentrations can emit red-light under effectively excitation by near-UV light.CIE chromaticity coo rdinates of all KNa_5 Ca_5(CO_3)_8:Eu~(3+) phosphors were calculated to locate in red region,and CCT of each sample is the range from 2815 to 3650 K,very close to the tungsten lamp light.Besides,concentration quenching phenomenon appearing at 5 mol% is found to be the result of electric multipolar interaction of Eu3+activators,and the decay lifetime is about1.63 ms,which almost unchanges with Eu~(3+) doping concentration.Importantly,thermal quenching analysis reveals good thermal stability with thermal activation energy of about 0.216 eV.The results reported here demonstrate that KNa_5 Ca_5(CO_3)_8 is a promising fluorescent host for LEDs applications.     

Detection of 2,4,6-trinitrophenol based on f-f transition of Eu~(2+)

In this paper,we designed Eu~(2+)-doped BaAlF_5 and BaSiF_6 downconversion nanophosphors with strong f-f transition emission to realize the quantitative detection of TNP.The surface of the as-prepared nanophosphors was modified by polyethylenimine(PEI) to increase the water solubility and to provide a pair of electrons to bind to the benzene ring in TNP,forming a Meisenheimer complex.The detection principle of TNP is based on luminescence resonance energy transfer(LRET) technology,where the PEI-functionalized BaAlF_5:Eu~(2+) and BaSiF_6:Eu~(2+) nanophosphors are used as energy donors and TNP is an energy acceptor.With increasing TNP concentrations,the luminescence intensity of the BaAlF_5:Eu~(2+)and BaSiF_6:Eu~(2+) nanophosphors at 359 nm [~4 f_7(~6 P_(7/2))→~4 f_7(~8 S_(7/2)) transition of Eu~(2+)] displays dramatic luminescent quenching.The BaAlF_5:Eu~(2+)@PEI or BaSiF_6:Eu~(2+)@PEI nanophosphor downconversion luminescent sensors show great sensitivity and selectivity and good linearity,and the detection limits of TNP are 0.57 and 2.82 ng/mL,respectively.     

Rational design of monovalent ions (Li,Na,K) co-doped ZnAl_2O_4:Eu~(3+) nanocrystals enabling versatile robust latent fingerprint visualization

Alkali metal ions(M~+ = Na~+,Li~+,K~+) co-doped ZnAl_2O_4:Eu~(3+)(5 mol%)(ZAE) nanopowders(NPs) were prepared via solution combustion route using Mimosa pudica(MP) leaves extract as a fuel. PXRD results of co-doped samples enhance the crystallinity and grain growth. Photoluminescence(PL) of the prepared ZAE and ZAE:M~+(M~+ = Na~+, Li~+, K~+) NPs shows intense emission peaks in the range of 550-750 nm and ascribed to ~5D_0→~7F_J(J=0-4) transitions of Eu~(3+) ions, respectively. A 2-fold enhancement in PL intensity was observed in Li~+ co-doped samples. The optimized ZnAl_2O_4:Eu~(3+)(5 mol%), Li~+(1 wt%)(ZAEL)NPs were used to visualize LFPs on various porous, semi-porous and non-porous surfaces through robust powder dusting technique. The visualized latent fingerprints(LFPs) reveal well defined level 1-3 ridge characteristics under several tests such as fingerprint aging and fresh water treatment for various time durations. The obtained results clearly evidence that the prepared NPs are quite useful for multifunctional applications such as advanced forensic and solid state lightning.     

Luminescence properties of a new yellow long-lasting phosphorescence phosphor NaAlSiO_4:Eu~(2+),Ho~(3+)

A new aluminosilicate long-lasting phosphor with composition of NaAlSiO4:Eu2+,Ho3+ was synthesized and investigated. Under UV light excitation, the phosphor emitted yellow light corresponding to the characteristic emission of Eu2+ due to 5d-4f transition. Bright yellow phosphorescence sustaining for more than 30 min was observed after ceasing the excitation. The phosphorescence intensity decay obeyed a t–1 decay law, indicating a tunneling electron-hole recombination process in the phosphor. Four peaks appeared in the thermoluminescence curve and the ones at 322 and 370 K were thought to account for the long lasting phosphorescence at room temperature. The Ho3+ ion incorporated into the phosphor did not give any light but dramatically increased the intensities of both photoluminescence and phosphorescence via promoting defect levels in the phosphor.     

Structural and photoluminescence studies of Eu3+ doped zinc oxide nanorods prepared by precipitation method

Trivalent europium doped zinc oxide (ZnO:Eu3+) nanocrystals were synthesized via room temperature chemical co-precipitation and they were systematically characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and photoluminescence (PL) spectroscopy. The as-synthesized samples were found to have hexagonal wurtzite coexisted with the intermediate Zn5(OH)8Cl2·H2O phase, while the single hexagonal phase was facilitated due to the calcinations. The as obtained samples were broadly composed of nanoflakes while the highly crystalline nanorods were formed due to low temperature annealing of the as-synthesized samples. The crystallite size of the nanoflakes and nanorods (40-90 nm) were extracted from the XRD pattern which was found to be consistent with scanning electron microscopy (SEM) measurements. The photolumi-nescence (PL) spectra of nanophosphors showed bright red and orange emissions at 618 and 594 nm respectively with efficient broad blue green emission spectrum due to ZnO lattice. Further, a good energy transfer process from ZnO host to Eu3+ was observed in PL emission and excitation spectra of Eu3+ doped ZnO ions. In all, the present nanophosphors were found to have great potentiality for bio-applications.     

Kinetics of fluorescence properties of Eu~(3+) ion in strontium-aluminiumbismuth-borate glasses

Eu3＋ doped strontium-aluminium-bismuth-borate glasses with the chemical composition（50–x）B2O3＋20Bi2O3＋7Al F3＋ 8Sr O＋15Sr F2＋x Eu2O3（where x=0.1 mol.%, 0.5 mol.%, 1.0 mol.% and 1.5 mol.%） were prepared by the conventional melt quenching technique.Structural properties of the prepared glasses were analysed through X-ray diffraction（XRD）, scanning electron microscopy（SEM）, energy dispersive spectroscopy（EDS） and Raman spectral techniques.Thermal stability of glass was analysed by differential thermal analysis（DTA） curve.Photoluminescence characteristics were studied using excitation, emission spectra and decay curves of Eu3＋ doped strontium-aluminium-bismuth-borate glasses.The Judd-Ofelt（J-O） intensity parameters, Ωλ（λ=2, 4 and 6） were obtained using emission spectra and was used to identify the nature of Eu3＋ ions with their surrounding ligands.Using J-O parameters the transition probabilities（A）, stimulated emission cross-sections σE p, branching ratios（βR） and radiative lifetimes（τmeas and τcal） were evaluated for the 5D0→7F J（J=0, 1, 2, 3 and 4） transition of Eu3＋ ions in the present glasses.The decay profiles were found to be non exponential for all the concentrations and the measured lifetimes（τmeas） were obtained from the decay profiles.The higher values of A, σE p, βR and quantum efficiency（η） for 5D0→7F2 emission transition at 617 nm confirmed the present glass was as active medium for red laser emission applications.     

Luminescence properties of red phosphors Ca_（10）Li（PO_4）_7：Eu~（3＋）

A series of red phosphors Ca10Li (PO4)7:Eu3+ were synthesized by high temperature solid-state reaction method. Their luminescence properties were characterized by means of photoluminescence excitation and emission spectra,CIE chromaticity and quantum efficiency. Results indicated that the phosphors could be effectively excited by the near ultraviolet (NUV) light (393 nm). The main emission peaks of the phosphor were ascribed to the transition 5D0-7F2 (613 and 617 nm) of Eu3+ ion when samples were excited by...     

Emission tunable of Mg_(0.695)Si_(0.695)Al_(1.39)O_(3.65)N_(0.35):Eu~(2+),Mn~(2+) oxynitride phosphors via energy transfer for WLEDs

A series of Eu~(2+)doped and Eu~(2+)/Mn~(2+) co-doped Mg_(0.695)Si_(0.695)Al_(1.39)O_(3.65)N_(0.35)(MSAON) phosphors were synthesized by solid-state reaction at a lower temperature of 1500℃.The crystal morphology and structure of MSAON host were characterized by SEM,TEM and XRD.The quantum yield(QY) for Eu~(2+)doped MSAON phosphors was measured as high as 62%,indicating the excellent luminous efficiency.For the Eu~(2+)/Mn~(2+)co-doped MSAON phosphor,the photoluminescence spectrum and delay curves reveal the efficient energy transfer(ET) process from Eu2+to Mn~(2+)ions.Meanwhile,the corresponding energy transfer efficiency,critical distance and mechanism are discussed in detail.Temperature-dependent emission spectrum shows the thermal and color stabilities.The emission color of MSAON:Eu~(2+),Mn~(2+)phosphors could be tuned from blue through white to red via varying the concentration of Mn~(2+) ions.White-light-emitting diodes(WLEDs) were successfully fabricated by encapsulating the phosphors in nUV LED(365 nm) devices obtaining white light with color rendering index(CRI) as high as 87.7.The results reveal that the MSAON:Eu~(2+),Mn~(2+)phosphors could have potential application in the field of n-UV WLEDs.     

Preparation, spectral characteristics and photocatalytic activity of Eu-doped WO3 nanoparticles

Eu³⁺-WO₃ nanoparticles were successfully prepared by the modified method of Pechini. The prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), and UV-vis spectroscopy. Results showed that the Eu³⁺-WO₃ nanoparticles, which had an average external diameter of 10–25 nm, were composed of the different shapes of puncheon and catenary after being pretreated by pH, pressure vessal, and surfactant. Moreover, structural transformation matrix contained different crystals of anorthic and orthorhombic structure. The photocatalytic activities of the nanoparticles were evaluated by photocatalytic decomposition of rhodamine B. Eu³⁺-WO₃ nanoparticles were more efficient than WO₃ and TiO₂ on sunlight use ratio. Photocatalysis experiments indicated that the Eu³⁺-WO₃ nanoparticles exhibited the highest photocatalytic activity.     

Luminescence thermal quenching of M_2SiO_4:Eu~(2+)(M=Sr,Ba) phosphors

In this paper,luminescence thermal quenching of M_2SiO_4:Eu~(2+)(M=Sr,Ba) orthosilicate phosphors and mechanisms for thermal quenching proposed by different authors are briefly reviewed.Depending on preparation conditions and/or Eu~(2+)-doping concentrations,the quenching temperature(T_(1/2)) and activation energy for thermal quenching of the same orthosilicate phosphor reported by different authors are inconsistent.The common conclusion is that T_(1/2) of the intermediate compound(Ba_(1-x)Sr_x)_2 SiO_4:Eu~(2+)(x≈0.5) is higher than that of either Sr_2So_4;Eu~(2+)or Ba_2SiO_4;Eu~(2+)end-member.Moreover,T_(1/2) of the best-performing SrBaSiO_4:Eu~(2+)is evidently lower than that of YAG:Ce~(3+)and some Eu~(2+)-doped nitride phosphors.Rega rding the quenching mechanism,most of the investigators attributed thermal quenching to a thermally assisted 4f-5d cross-over in the configuration coordinate diagram.Only a few authors ascribed thermal quenching to a thermally assisted photoionization of 5 d electron to conduction band of the host.Nonetheless,a close inspection of T_(1/2) and Stokes shift derived from the vibrational spectra of the intermediate compound and end-member phosphors indicates that the 5d electron photo ionization model instead of the 4f-5d crossing decay model should be the genuine mechanism for the thermal quenching of M_2 SiO_4:Eu~(2+)(M=Sr,Ba) phosphors.Since the relationship between T_(1/2) and Stokes shift of the phosphors does not support the 4 f-5 d crossing decay model.The ionization probability of the 5 d electron depends on the energy gap(E_(dC)) between 5 d_1 level of the Eu~(2+)and conduction band minimum(CBM) of the host at higher temperatures.Lattice thermal expansion would result in an elevating 5 d_1 level of the Eu~(2+)along with a diminishing CBM of the host and as a consequence a reduction in E_(dC) and an enhanced photo ionization probability at elevated temperatures.A less rigid lattice and hence a larger coefficient of thermal expansion of M_2SiO_4 hosts should be the physical origin of poorer thermal quenching properties of the orthosilicate phosphors.     

Effect of Gd~(3+)-,Pr~(3+)-or Sm~(3+)-substituted cobalt-zinc ferrite on photodegradation of methyl orange and cytotoxicity tests

Gd~(3+)-,Pr~(3+)-or Sm~(3+)-doped Co-Zn(Co_(0.5)Zn_(0.5)Fe_2 O_4) magnetic ferrites(i.e.,Co_(0.5)Zn_(0.5)Gd_(0.1)Fe_(1.9)O_4,Co_(0.5)Zn_(0.5)Pr_(0.1)Fe_(1.9)O_4 and Co_(0.5)Zn_(0.5)Sm_(0.1)Fe_(1.9)O_4) were prepared using a facile sol-gel approach,and the structure,surface morphology and chemical composition of the products were studied by means of scanning electron microscopy(SEM),energy dispersive X-ray analysis(EDX),X-ray diffraction(XRD),UVvisible diffuse reflectance spectroscopy(DRS),photoluminescence(PL) spectroscopy,Fourier transform infrared spectroscopy(FT-IR) and vibrating sample magnetometer(VSM) spectroscopy.XRD patterns show the Co-Zn product is composed of cubic spinel phases with few impurities or secondary phases,and the average crystallite sizes of the samples are determined to be approximately～51—80,～99—181,～68—103 and～83—133 nm.Also the coercivity and remnant and saturation magnetizations,evaluated by vibrating sample magnetometer(VSM),are found to increase linearly with the incorporation of Gd3+,Pr3+and Sm3+in the product formulation.The CO_(1-x)Zn_xFe_(2-y)R_yO_4 photocatalyst sample is found to display a red shift in its absorption,and exhibits outstanding photocatalytic effects in the degradation of MO under ultraviolet(UV) light.This is attributed to the reduction of the band gap of cobalt-zinc ferrite due to the presence of rare earth ions.Further in vitro evaluations of the cytotoxic effects of the synthesized nanoparticles were performed on a HeLa cell line.     

Effects of annealing temperature and neodymium concentration on structural and photoluminescence properties of Nd~(3+)-doped Y_2O_3-SiO_2 powders

We report the structural and photoluminescence(PL) properties of Nd~(3+)-doped Y_2 O_3-SiO_2 powders(Y_2 O_3-SiO_2:Nd~(3+)) as functions of annealing temperature and Nd~(3+) ion doping concentration.Y_2 O_3-SiO_2:Nd~(3+)powders were prepared using the high-energy ball-milling(HEBM) method,and their structural and PL properties were investigated using X-ray diffraction(XRD),Fourier transform infrared(FTIR) spectroscopy,and PL spectroscopy.The XRD results reveal a cubic phase without impurities,and the peak broadening decreases with an increase in annealing temperature due to the increase in the crystallite size.The PL emission intensity increases with an increase in annealing temperature.The highest PL emission intensity is observed for the 300-min milled mixture annealed at 1000℃ for 1 h with a Nd~(3+) concentration of 1 mol%.The PL peaks excited by 800 nm radiation were detected,centered at 1080 nm(~4 F_(3/2)→~4 I_(11/2)) and 1350 nm(~4 F_(3/2)→~4 I_(13/2)).     

Preparation and characterization of flower-like SrAIeO4：Eu^2＋,Dy^3＋ phosphors by sol-gel process

A flower-like Eu²⁺ and Dy³⁺ co-doped SrAl₂O₄ long-lasting phosphorescent (LLP) phosphor was synthesized via the inorganic- salt-based sol-gel method. The crystal structure, morphology and optical properties of the composite were characterized. X-ray diffraction diffusion (XRD) data and DSC-TG curves of the phosphor revealed that the SrAl₂O₄ crystallites have been formed after the precursor was calcined at 900 °C and to be single-phase SrAl₂O₄ at 1100 °C. The SEM photographs indicated that the sample exhibited a universal flower-like morphology with crystallite size of about 1-2 μm. After being irradiated with ultraviolet (UV) light, the flower-like phosphor emitted long-lasting green phosphorescence with an excitation peak at 365 nm and emission peak at 500 nm which was ascribed to the characteristic 5d-4f transition of Eu²⁺. Both the PL spectra and the luminance decay curve revealed that this phosphor exhibited efficient luminescence and long lasting properties.     

Blue-emitting Sr_(1-x)Ca_xLu_2O_4:Ce~(3+) phosphors for high CRI white LEDs

A broadband blue-emitting Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+)(x=0-0.2) phospho rs were synthesized,which can be used for near-UV pumped white light-emitting diodes(w-LEDs).The crystal structures,photoluminescence pro perties,external quantum efficiency,the rmal stability and application perfo rmance of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+),by partially substituting Sr~(2+) with Ca~(2+)(x=0-0.2),were studied by various analytical techniques.When the Ca/Sr ratio of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) gradually increases,the emission peak of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) red-shiftes from 459 to 465 nm,corrected external quantum efficiency increases from 31.8% to 42.9%,and the thermal stability is also improved.The mechanism of the changes of the photoluminescence emission and excitation spectra,external quantum efficiency and thermal stability properties was also investigated in detail.In addition,a w-LED was fabricated by using SrLu_2 O_4:Ce~(3+)(blue),β-sialon:Eu~(2+)(green) and(Sr,Ca)AlSiN_3:Eu~(2+)(red) phosphors combined with a 405 nm near-UV LED chip,and its color rendering index(CRI) reaches 96.0.When Sr_(0.8)Ca_(0.2)Lu_2 O_4:Ce~(3+)is applied as blue phosphor to substitute SrLu_2 O_4:Ce~(3+),the obtained w-LED devices have high luminous efficiency,and CRI greater than 95.0.These re sults show that the Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) can be potential blue phosphors for n-UV pumped high CRI w-LEDs application.     

Photoluminescence properties of Ca-doped BaMg Al10O17）：Eu2＋,Mn2＋ blue phosphor using BaF2 and CaF2 as co-flux

Ca-doped Ba Mg Al10O17：Eu2＋,Mn2＋（BAM） blue phosphors were synthesized by flux assisted solid-state reaction method using Ca F2 and Ba F2 as co-flux.Good dispersity and particle size homogenization of hexagonal pure phase BAM were obtained by sintering at 1400 ℃.The effects of the Ca2＋ ions content on the structure, morphology and photoluminescence properties of the phosphors were studied.The results indicated that the incorporation of Ca could decrease the lattice constant, improve the homogeneity and dispersity and enhance the photoluminescence（PL） intensity of the phosphor effectively.The optimum Ba0.86Ca0.04Mg0.97Al10O17：0.1Eu2＋,0.03Mn2＋ PL intensity was enhanced for about 30% and relative brightness was improved about 4%.Furthermore, the synthesized BAM and commercial BAM phosphors were annealed for 30 min at 600 oC in air.The Ca-doped phosphors had stronger emission intensity, higher brightness and better chromaticity stability than that of the commercial phosphor.These results indicated that Ca-doped blue phosphors had good potential applications in the commercial tricolor fluorescent lamps as well as in other display and lamps.     

Structural and optical properties of Dy~(3+):YAlO_3 phosphors for yellow light-emitting diode applications

The spectroscopic properties of a series of Dy~(3+) single-doped and Dy~(3+)/Nd~(3+),Dy~(3+)/Tb~(3+),and Dy~(3+)/Tm~(3+)co-doped YAlO_3(yttrium aluminum perovskite,YAP) phosphors were investigated and compared through the measurements of optical absorption,emission spectra,and fluorescence decay curves.For the Dy~(3+) ion single-doped samples,the intensity of each absorption band increases with an increment in Dy~(3+) ion doping concentration,and the identified strong absorption peak at 447 nm indicates that Dy~(3+):YAP phosphors are suitable to be pumped by a blue laser diode(LD).For all co-doped samples,absorption peaks of Dy~(3+) ion along with some of the absorption bands of Nd~(3+),Tb~(3+),and Tm~(3+) ions are observed.Under 351 and 447 nm excitation,a prominent emission peak at 572 nm was obtained in all the samples,corresponding to Dy~(3+):~4 F_(9/2)→~6 H_(13/2) transition.Here,2 at% Dy~(3+):YAP phosphor exhibits the highest yellow emission intensity under 447 nm pumping.Among the three kinds of Dy~(3+) co-doped phosphors,Dy~(3+)/Tb~(3+):YAP phosphor possesses the dominant yellow emission.The fluorescence decay curves show exponential behaviour and are fitted well.The Commission International de L'Eclairage(CIE)chromaticity coordinates were calculated following the respective emission spectra,and it is found that all the coordinates locate in the yellow region.The energy transfer(ET) processes were investigated and the concentration quenching mechanism was discussed.The obtained results suggest that Dy~(3+)-activated YAP phosphors are good candidates for yellow LED applications.     

Synthesis and luminescence properties of Tb3+/Eu3+ co-doped GdAlO3 phosphors with enhanced red emission

The(Gd_(0.97-x)Eu_xTb_(0.03))AIO_3(x= 0.005-0.07) phosphors were synthesized by the co-precipitation method,using ammonium bicarbonate as a precipitant.The combined technologies of FT-IR,XRD,FESEM,PLE/PL and photo luminescence decay analysis were used to study the phase evolution,morphologies and luminescent properties.The phosphors with good dispersion exhibit strong vivid red emission located at 617 nm(~5 D_0-~7 F_2 transition of Eu~(3+)) under the optimal excitation wavelength of 275 nm(~4 f~8-4 f~75 d~1 transition of Tb~(3+),~8 S_(7/2)→6~I_J transition of Gd~(3+)).The presence of Gd~(3+) and Tb~(3+) excitation bands on the PLE spectra monitoring the Eu~(3+) emission directly gives an evidence of Tb~(3+) → Eu~(3+) and Gd~(3+) → Eu~(~(3+)) energy transfer,The emission intensity varies with the Eu~(3+) amount,and the quenching concentration is ～5 at% which is close to the calculated value.The quenching mechanism is determined to be the exchange reaction between Eu~(3+).The temperature-dependent PL analysis indicates that the best(Gd_(0.92)Eu_(0.05)Tb_(0.03))AlO_3 sample possesses good thermally stable properties.All the(Gd_(0.97-x)Eu_xTb_(0.03))AIO_3 phosphors in this work have similar CIE chromaticity coordinates and color temperatures,which are(0.65 ± 0.02,0.35 ± 0.02) and ～2558 K,respectively.Fluorescence decay analysis shows that the lifetime for～617 nm emission decreases with the content of Eu~(3+) and temperature increasing.Owing to the Tb~(3+)→ Eu~(3+) energy transfer,the luminescent properties of the(Gd_(0.92)Eu_(0.05)Tb_(0.03))AlO_3 phosphors are superior to the single Eu~(~(3+)) doped sample(Gd_(0.95)Eu_(0.05))AlO_3.As a result,the prepared phosphors may be widely used in solid-state display and light emitting devices.