Crystal structure of the nucleosome core particle at 2.8 A resolution

The X-ray crystal structure of the nucleosome core particle of chromatin shows in atomic detail how the histone protein octamer is assembled and how 146 base pairs of DNA are organized into a superhelix around it. Both histone/histone and histone/DNA interactions depend on the histone fold domains and additional, well ordered structure elements extending from this motif. Histone amino-terminal tails pass over and between the gyres of the DNA superhelix to contact neighbouring particles. The lack of uniformity between multiple histone/DNA-binding sites causes the DNA to deviate from ideal superhelix geometry.     

Three-dimensional structure of lipoamide dehydrogenase from Pseudomonas fluorescens at 2.8 A resolution. Analysis of redox and thermostability properties

The structure of Pseudomonas fluorescens lipoamide dehydrogenase, a dimeric flavoenzyme with a molecular mass of 106,000 daltons, was solved by the molecular replacement method and refined to an R-factor of 19.4% at 2.8 A resolution. The root-mean-square difference from ideal values for bonds and angles is 0.019 A and 3.8 degrees, respectively. The structure is closely related to that of the same flavoprotein from Azotobacter vinelandii. The root-mean-square difference for 932 C alpha atoms is 0.64 A, with 84% sequence identity. The residues in the active site are identical, while 89% of the interface residues are the same in the two enzymes. A few structural variations provide the basis for the differences in thermostability and redox properties between the two homologous proteins. Particularly, in the A. vinelandii molecule a threonine to alanine (T452A) mutation leaves a buried carbonyl oxygen, located at the subunit interface and in proximity of the flavin ring, unpaired to any H-bond donor, probably providing an explanation for the lower stability of the A. vinelandii enzyme with respect to the P. fluorescens enzyme. Six surface loops, which previously could not be accurately positioned in the A. vinelandii structure, are well defined in P. fluorescens lipoamide dehydrogenase. On the basis of the P. fluorescens structure, the six loops could be correctly defined also in the A. vinelandii enzyme. This is an unusual case where similar refinement methodologies applied to two crystal forms of closely related proteins led to electron density maps of substantially different quality. The correct definition of these surface residues is likely to be an essential step for revealing the structural basis of the interactions between lipoamide dehydrogenase and the other members of the pyruvate dehydrogenase multienzyme complex.     

Crystallization and structure determination of bovine profilin at 2.0 A resolution

Profilin regulates the behavior of the eukaryotic microfilament system through its interaction with non-filamentous actin. It also binds several ligands, including poly(L-proline) and the membrane phospholipid phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2). Bovine profilin crystals (space group C2; a = 69.15 A, b = 34.59 A, c = 52.49 A; alpha = gamma = 90 degrees, beta = 92.56 degrees) were grown from a mixture of poly(ethylene glycol) 400 and ammonium sulfate. X-ray diffraction data were collected on an imaging plate scanner at the DORIS storage ring (DESY, Hamburg), and were phased by molecular replacement, using a search model derived from the 2.55 A structure of profilin complexed to beta-actin. The refined model of bovine profilin has a crystallographic R-factor of 16.5% in the resolution range 6.0 to 2.0 A and includes 128 water molecules, several of which form hydrogen bonds to stabilize unconventional turns. The structure of free bovine profilin is similar to that of bovine profilin complexed to beta-actin, and C alpha atoms from the two structures superimpose with an r.m.s. deviation of 1.25 A. This value is reduced to 0.51 A by omitting Ala1 and the N-terminal acetyl group, which lie at a profilin-actin interface in crystals of the complex. These residues display a strained conformation in crystalline profilin-actin but may allow the formation of a hydrogen bond between the N-acetyl carbonyl group of profilin and the phenol hydroxyl group of Tyr188 in actin. Several other actin-binding residues of profilin show different side-chain rotomer conformations in the two structures. The polypeptide fold of bovine profilin is generally similar to those observed by NMR for profilin from other sources, although the N terminus of Acanthamoeba profilin isoform I lies in a distorted helix and the C-terminal helix is less tilted with respect to the strands in the central beta-pleated sheet than is observed in bovine profilin. The majority of the aromatic residues in profilin are exposed to solvent and lie in either of two hydrophobic patches, neither of which takes part in an interface with actin. One of these patches is required for binding poly(L-proline) and contains an aromatic cluster comprising the highly conserved residues Trp3, Tyr6, Trp31 and Tyr139. In forming this cluster, Trp31 adopts a sterically strained rotamer conformation.(ABSTRACT TRUNCATED AT 400 WORDS)     

Three-dimensional structure of human tissue inhibitor of metalloproteinases-2 at 2.1 A resolution

The three-dimensional structure of human tissue inhibitor of metalloproteinases-2 (TIMP-2) was determined by X-ray crystallography to 2.1 A resolution. The structure of the inhibitor consists of two domains. The N-terminal domain (residues 1-110) is folded into a beta-barrel, similar to the oligonucleotide/oligosaccharide binding fold otherwise found in certain DNA-binding proteins. The C-terminal domain (residues 111-194) contains a parallel stranded beta-hairpin plus a beta-loop-beta motif. Comparison of the structure of uncomplexed human TIMP-2 with that of bovine TIMP-2 bound to the catalytic domain of human MMP-14 suggests an internal rotation between the two domains of approximately 13 degrees upon binding to the protease. Furthermore, local conformational differences in the two structures that might be induced by formation of the protease-inhibitor complex have been found. The most prominent of these involves residues 27-40 of the A-B beta-hairpin loop. Structure-based alignment of amino acid sequences of representatives of the TIMP family maps the sequence differences mainly to loop regions, and some of these differences are proposed to be responsible for the particular properties of the various TIMP species.     

Three-dimensional structure of the plant photosystem II reaction centre at 8 A resolution

Photosystem II is a multisubunit enzyme complex involved in plant photosynthesis. It uses solar energy to catalyse the breakdown of water to reducing equivalents and molecular oxygen. Native photosystem II comprises more than 25 different subunits, and has a relative molecular mass of more than 600K. Here we report the three-dimensional structure of a photosystem II subcomplex, containing the proteins D1, D2, CP47 and cytochrome b-559, determined by electron crystallography. This CP47 reaction centre, which has a relative molecular mass of 160K, can perform light-mediated energy and electron-transfer reactions but is unable to oxidize water. The complex contains 23 transmembrane alpha-helices, of which 16 have been assigned to the D1, D2 and CP47 proteins. The arrangement of these helices is remarkably similar to that of the helices in the reaction centres of purple bacteria and of plant photosystem I, indicating a common evolutionary origin for these assemblies. The map suggests that redox cofactors in the D1-D2 complex are located in positions analogous to those in the bacterial reaction centre, but the distance between the chlorophylls corresponding to the bacterial 'special pair' is significantly larger.     

Crystal structure of the secretory form of membrane-associated human carbonic anhydrase IV at 2.8-A resolution

It has recently been demonstrated that the C-terminal deletion mutant of recombinant human carbonic anhydrase IV (G267X CA IV) converts the normally glycosylphosphatidylinositol-anchored enzyme into a soluble secretory form which has the same catalytic properties as the membrane-associated enzyme purified from human tissues. We have determined the three-dimensional structure of the secretory form of human CA IV by x-ray crystallographic methods to a resolution of 2.8 A. Although the zinc binding site and the hydrophobic substrate binding pocket of CA IV are generally similar to those of other mammalian isozymes, unique structural differences are found elsewhere in the active site. Two disufide linkages, Cys-6-Cys-11G and Cys-23-Cys-203, stabilize the conformation of the N-terminal domain. The latter disulfide additionally stabilizes an active site loop containing a cis-peptide linkage between Pro-201 and Thr-202 (this loop contains catalytic residue Thr-199). On the opposite side of the active site, the Val-131-Asp-136 segment adopts an extended loop conformation instead of an alpha-helix conformation as found in other isozymes. Finally, the C terminus is surrounded by a substantial electropositive surface potential, which is likely to stabilize the interaction of CA IV with the negatively charged phospholipid headgroups of the membrane. These structural features are unique to CA IV and provide a framework for the design of sulfonamide inhibitors selective for this particular isozyme.     

Refined structure of dimeric diphtheria toxin at 2.0 A resolution

The refined structure of dimeric diphtheria toxin (DT) at 2.0 A resolution, based on 37,727 unique reflections (F > 1 sigma (F)), yields a final R factor of 19.5% with a model obeying standard geometry. The refined model consists of 523 amino acid residues, 1 molecule of the bound dinucleotide inhibitor adenylyl 3'-5' uridine 3' monophosphate (ApUp), and 405 well-ordered water molecules. The 2.0-A refined model reveals that the binding motif for ApUp includes residues in the catalytic and receptor-binding domains and is different from the Rossmann dinucleotide-binding fold. ApUp is bound in part by a long loop (residues 34-52) that crosses the active site. Several residues in the active site were previously identified as NAD-binding residues. Glu 148, previously identified as playing a catalytic role in ADP-ribosylation of elongation factor 2 by DT, is about 5 A from uracil in ApUp. The trigger for insertion of the transmembrane domain of DT into the endosomal membrane at low pH may involve 3 intradomain and 4 interdomain salt bridges that will be weakened at low pH by protonation of their acidic residues. The refined model also reveals that each molecule in dimeric DT has an "open" structure unlike most globular proteins, which we call an open monomer. Two open monomers interact by "domain swapping" to form a compact, globular dimeric DT structure. The possibility that the open monomer resembles a membrane insertion intermediate is discussed.     

Crystal structure of horseradish peroxidase C at 2.15 A resolution

The crystal structure of horseradish peroxidase isozyme C (HRPC) has been solved to 2.15 A resolution. An important feature unique to the class III peroxidases is a long insertion, 34 residues in HRPC, between helices F and G. This region, which defines part of the substrate access channel, is not present in the core conserved fold typical of peroxidases from classes I and II. Comparison of HRPC and peanut peroxidase (PNP), the only other class III (higher plant) peroxidase for which an X-ray structure has been completed, reveals that the structure in this region is highly variable even within class III. For peroxidases of the HRPC type, characterized by a larger FG insertion (seven residues relative to PNP) and a shorter F' helix, we have identified the key residue involved in direct interactions with aromatic donor molecules. HRPC is unique in having a ring of three peripheral Phe residues, 142, 68 and 179. These guard the entrance to the exposed haem edge. We predict that this aromatic region is important for the ability of HRPC to bind aromatic substrates.     

Canine parvovirus capsid structure, analyzed at 2.9 A resolution

The DNA-containing capsid of canine parvovirus (CPV) is analyzed following atomic refinement at 2.9 A resolution. The capsid contains 60 copies of the capsid protein related by icosahedral symmetry. The atomic model has been extended from the first residue (Gly37) of the unrefined 3.25 A structure towards the N terminus. The electron density shows that approximately 87% of the capsid proteins have N termini on the inside of the capsid, but for approximately 13%, the polypeptide starts on the outside and runs through one of the pores surrounding each 5-fold axis, explaining apparently conflicting antigenic data. Analysis of potential hydrogen bonds reveals approximately 50% more secondary structure than previously apparent. Most of the additional secondary structure are in the 71 and 221 residue-long loop insertions between beta-strands E and F and G and H, forming subunit-bridging sheets that likely add specificity to assembly interactions. Structural analysis of the extensive subunit interactions around the 3-fold axes shows that assembly is a multistep process with loops intertwining following initial contact. Estimated free energies of association suggest that the formation of 3 and 5-fold contacts likely takes precedence over 2-fold interactions. Energies for initial association into trimers or pentamers would be similar, but the intertwining of loops about the 3-fold axis adds an additional large activation barrier to dissociation. Analysis of the surfaces of the assembled capsid shows a surprising lack of basic amino acids that might have been expected to interact with the negatively charged phosphoribose backbone of the DNA. Instead, uncharged polar and van der Waal's interactions predominate in the packaging of single-stranded DNA into the capsid.     

The 2.8 A crystal structure of Gla-domainless activated protein C

The structure of the Gla-domainless form of the human anticoagulant enzyme activated protein C has been solved at 2.8 A resolution. The light chain is composed of two domains: an epidermal growth factor (EGF)-like domain modified by a large insert containing an additional disulfide, followed by a typical EGF-like domain. The arrangement of the long axis of these domains describes an angle of approximately 80 degrees. Disulfide linked to the light chain is the catalytic domain, which is generally trypsin-like but contains a large insertion loop at the edge of the active site, a third helical segment, a prominent cationic patch analogous to the anion binding exosite I of thrombin and a trypsin-like Ca[II] binding site. The arrangement of loops around the active site partially restricts access to the cleft. The S2 and S4 subsites are much more polar than in factor Xa and thrombin, and the S2 site is unrestricted. While quite open and exposed, the active site contains a prominent groove, the surface of which is very polar with evidence for binding sites on the primed side, in addition to those typical of the trypsin class found on the non-primed side.     

Crystal structure of the angiogenesis inhibitor endostatin at 1.5 A resolution

A number of extracellular proteins contain cryptic inhibitors of angiogenesis. Endostatin is a 20 kDa C-terminal proteolytic fragment of collagen XVIII that potently inhibits endothelial cell proliferation and angiogenesis. Therapy of experimental cancer with endostatin leads to tumour dormancy and does not induce resistance. We have expressed recombinant mouse endostatin and determined its crystal structure at 1.5 A resolution. The structure reveals a compact fold distantly related to the C-type lectin carbohydrate recognition domain and the hyaluronan-binding Link module. The high affinity of endostatin for heparin is explained by the presence of an extensive basic patch formed by 11 arginine residues. Endostatin may inhibit angiogenesis by binding to the heparan sulphate proteoglycans involved in growth factor signalling.     

Crystal structure of yellow meal worm alpha-amylase at 1.64 A resolution

The three-dimensional structure of the alpha-amylase from Tenebrio molitor larvae (TMA) has been determined by molecular replacement techniques using diffraction data of a crystal of space group P212121 (a=51.24 A; b=93.46 A; c=96.95 A). The structure has been refined to a crystallographic R-factor of 17.7% for 58,219 independent reflections in the 7.0 to 1.64 A resolution range, with root-mean-square deviations of 0.008 A for bond lengths and 1.482 degrees for bond angles. The final model comprises all 471 residues of TMA, 261 water molecules, one calcium cation and one chloride anion. The electron density confirms that the N-terminal glutamine residue has undergone a post-transitional modification resulting in a stable 5-oxo-proline residue. The X-ray structure of TMA provides the first three-dimensional model of an insect alpha-amylase. The monomeric enzyme exhibits an elongated shape approximately 75 Ax46 Ax40 A and consists of three distinct domains, in line with models for alpha-amylases from microbial, plant and mammalian origin. However, the structure of TMA reflects in the substrate and inhibitor binding region a remarkable difference from mammalian alpha-amylases: the lack of a highly flexible, glycine-rich loop, which has been proposed to be involved in a "trap-release" mechanism of substrate hydrolysis by mammalian alpha-amylases. The structural differences between alpha-amylases of various origins might explain the specificity of inhibitors directed exclusively against insect alpha-amylases.     

Crystal structure of Escherichia coli cystathionine gamma-synthase at 1.5 A resolution

The transsulfuration enzyme cystathionine gamma-synthase (CGS) catalyses the pyridoxal 5'-phosphate (PLP)-dependent gamma-replacement of O-succinyl-L-homoserine and L-cysteine, yielding L-cystathionine. The crystal structure of the Escherichia coli enzyme has been solved by molecular replacement with the known structure of cystathionine beta-lyase (CBL), and refined at 1.5 A resolution to a crystallographic R-factor of 20.0%. The enzyme crystallizes as an alpha4 tetramer with the subunits related by non-crystallographic 222 symmetry. The spatial fold of the subunits, with three functionally distinct domains and their quaternary arrangement, is similar to that of CBL. Previously proposed reaction mechanisms for CGS can be checked against the structural model, allowing interpretation of the catalytic and substrate-binding functions of individual active site residues. Enzyme-substrate models pinpoint specific residues responsible for the substrate specificity, in agreement with structural comparisons with CBL. Both steric and electrostatic designs of the active site seem to achieve proper substrate selection and productive orientation. Amino acid sequence and structural alignments of CGS and CBL suggest that differences in the substrate-binding characteristics are responsible for the different reaction chemistries. Because CGS catalyses the only known PLP-dependent replacement reaction at Cgamma of certain amino acids, the results will help in our understanding of the chemical versatility of PLP.     

The crystal structure of bacteriophage Q beta at 3.5 A resolution

BACKGROUND: The capsid protein subunits of small RNA bacteriophages form a T = 3 particle upon assembly and RNA encapsidation. Dimers of the capsid protein repress translation of the replicase gene product by binding to the ribosome binding site and this interaction is believed to initiate RNA encapsidation. We have determined the crystal structure of phage Q beta with the aim of clarifying which factors are the most important for particle assembly and RNA interaction in the small phages. RESULTS: The crystal structure of bacteriophage Q beta determined at 3.5 A resolution shows that the capsid is stabilized by disulfide bonds on each side of the flexible loops that are situated around the fivefold and quasi-sixfold axes. As in other small RNA phages, the protein capsid is constructed from subunits which associate into dimers. A contiguous ten-stranded antiparallel beta sheet facing the RNA is formed in the dimer. The disulfide bonds lock the constituent dimers of the capsid covalently in the T = 3 lattice. CONCLUSIONS: The unusual stability of the Q beta particle is due to the tight dimer interactions and the disulfide bonds linking each dimer covalently to the rest of the capsid. A comparison with the structure of the related phage MS2 shows that although the fold of the Q beta coat protein is very similar, the details of the protein-protein interactions are completely different. The most conserved region of the protein is at the surface, which, in MS2, is involved in RNA binding.     

The crystal and molecular structure of trichosanthin at 2.6 A resolution

The crystallographic refinement of trichosanthin has been performed at 2.6 A resolution. The crystal and molecular structure of trichosanthin is described in detail in this paper. On summarizing the regularity of the amino acid sequences of eight kinds of ribosome inactivating proteins and combining with the crystal and molecular structure of trichosanthin, fifteen most conservative amino acid residues are analyzed. It is found that four most conservative polar amino acid residues Gln156, Glu160, Arg163 and Glu189 gather on the molecular surface on the boundary of the large and small domains, thus forming the active center of the protein molecule.     

X-ray structure at 1.76 A resolution of a polypeptide phospholipase A2 inhibitor

The high resolution crystal structure of a natural PLA2 inhibitor has been determined by Patterson search methods. In the heterodimeric, neurotoxic complex, vipoxin, isolated from the venom of Bulgarian viper, PLA2 inhibitor represents the non-toxic subunit. The model was refined to a crystallographic R-factor of 15.5% for data between 6 and 1.76 A resolution. The packing of the inhibitor in the crystal reveals close contacts between the molecules, which are symmetry-related by the 2-fold axes of the lattice. These pairs associate as a crystallographic dimer, stabilized by a set of interactions, including van der Waals contacts between residues from symmetry-related pairs, denoted as the recognition site and the recognition surface. Residues Ph3, Trp31 and Tyr119 represent the recognition site of inhibitor which possibly fits to the hydrophobic wall of the target PLA2. The topology of the inhibitor represents the PLA2 type of folding: three long helices and a beta-hairpin. Superposition of the structure of the inhibitor shows an almost complete overlap with different mammalian and viper PLA2 in the backbone and in the position of the sidechains of the residues that belong to the active centre and the hydrophobic wall. A "lock and key" mechanism of recognition of its native PLA2 in gland cells and other toxic PLA2 in vitro has been suggested. The mechanism includes complementary "head to tail" interactions between the recognition site of the inhibitor and a recognition surface located on the hydrophobic wall of the target PLA2. Having a high spatial homology with the PLA2 family of enzymes but opposing their action, the inhibitor from vipoxin presents an example of a divergent evolution of an ancient PLA2. The presence of a space for binding calcium in the inhibitor is believed to be a rudiment and proof of a common origin with PLA2.     

Streptomyces griseus aminopeptidase: X-ray crystallographic structure at 1.75 A resolution

The X-ray crystal structure of the enzyme Streptomyces griseus aminopeptidase (SGAP) has been determined in its double zinc form to 1.75 A resolution, in its apo-enzyme from (zinc removed) to 2.1 A resolution, and as a mercury replaced derivative to 2.1 A resolution. The structure solution was achieved by single isomorphous replacement with phasing from anomalous scattering (SIRAS), followed by density modification with histogram matching. The protein consists of a central beta-sheet made up of eight parallel and antiparallel strands, surrounded by helices on either side. The active site is located at the carbonyl ends of two middle strands of the beta-sheet region. Two sections of the chain that could not be traced were Glu196 to Arg202, which borders the active site, and the final seven C-terminal residues starting with Gly278. The active site contains two zinc cations, each with similar ligands, at a distance of 3.6 A from each other. An unknown molecule appears to be bound to both zinc ions in the active site at partial occupancy and has been modelled as a phosphate ion. A calcium binding site has also been identified, consistent with the observations that calcium modulates the activity of the enzyme, and increases its heat stability. The mechanism by which the calcium cation modulates enzyme activity is not apparent, since the location of the calcium binding site is approximately 25 A distant from the active site zinc ions. Comparison of the structure of SGAP to other known aminopeptidases shows that the enzyme is most similar to Aeromonas proteolytica aminopeptidase (AAP). Both enzymes share a similar topology, although the overall sequence identity is very low (24% in aligned regions). The coordination of the two active site zinc cations in SGAP resembles that of AAP. These two microbial enzymes differ from bovine lens leucine aminopeptidase (LAP) in both overall structure and in coordination of the two zinc ions.