Hyperbranched polyurethane/Fe3O4 thermosetting nanocomposites as shape memory materials

Nanocomposites of hyperbranched polyurethane were prepared by the in situ pre-polymerization technique with Fe₃O₄ nanoparticles. The synthesized Fe₃O₄ nanoparticles were characterized by the Fourier transform infrared spectroscopy and the X-ray diffraction study. The transmission electron microscopic study indicates the homogeneous distribution of Fe₃O₄ nanoparticles in the polymer matrix. The mechanical, thermal and shape memory behaviors of the nanocomposites were studied as a function of nanomaterial content. The glycidyl bisphenol-A based epoxy cured thermosetting nanocomposites exhibited significant improvement of tensile strength (5.7–18 MPa), scratch hardness (3.0–6.5 kg) and thermal stability (241–275 °C) with the increase of the content of Fe₃O₄. The nanocomposites possess excellent shape fixity over the repeated cycles of test. They also showed good shape recovery under the application of microwave energy. The shape recovery speed found to increase with the increase of the loading of Fe₃O₄ in the nanocomposites. Thus, the prepared nanocomposites might be utilized as advanced shape memory materials in their potential fields.     

in situ synthesis of biopolyurethane nanocomposites reinforced with modified multiwalled carbon nanotubes

Biopolyurethane nanocomposites reinforced with silane‐modified multiwalled carbon nanotubes (s‐MWCNT) were successfully prepared. The carbon nanotube surfaces were modified by means of functional amine groups via ozone oxidation followed by silanization. The surface structure of the s‐MWCNTs was characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. The s‐MWCNTs were incorporated into a vegetable oil‐based polyurethane (PU) network via covalent bonding to prepare PU nanocomposites. The effect of s‐MWCNT loading on the morphology, thermomechanical, and tensile properties of the PU nanocomposites was studied. It was determined that the s‐MWCNTs were dispersed effectively in the polymer matrix and that they improved the interfacial strength between the reinforcing nanotubes and the polymer matrix. Storage modulus, glass transition temperature, Young's modulus, and tensile strength of the nanocomposites increased with increasing s‐MWCNT loading up to 0.8%. However, increasing the s‐MWCNT content to 1.2 wt % resulted in a decrease in thermomechanical properties of the PU nanocomposites. This effect was attributed to the fact that at high s‐MWCNT contents, the increased number of amine groups competed with the polyol's hydroxyl groups for isocyanate groups, causing a decrease in the integrity of the PU matrix. High s‐MWCNT contents also facilitated aggregation of the nanotubes, causing a decrease in thermomechanical properties. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42515.     

Influence of aminosilane‐functionalized carbon nanotubes on the rheometric,mechanical, electrical and thermal degradation properties of epoxidized natural rubber nanocomposites

We describe the preparation, characterization and physical properties of multiwalled carbon nanotube (MWCNT)‐filled epoxidized natural rubber (ENR) composites. To ensure better dispersion in the elastomer matrix, the MWCNTs were initially subjected to aminopropyltriethoxysilane (APS) treatment to bind amine functional groups (?NH₂) on the nanotube surface. Successful grafting of APS on the MWCNT surface through Si–O–C linkages was confirmed using Fourier transform infrared spectroscopy. Grafting of APS on the MWCNT surface was further corroborated using elemental analysis. ENR nanocomposites with various filler loadings were prepared by melt compounding to generate pristine and APS‐modified MWCNT‐filled elastomeric systems. Furthermore, we determined the effects of various filler loadings on the rheometric, mechanical, electrical and thermal degradation properties of the resultant composite materials. Rheometric cure characterization revealed that the torque difference increased with pristine MWCNT loading compared to the gum system, and this effect was more pronounced when silane‐functionalized MWCNTs were loaded, indicating that this effect was due to an increase in polymer–carbon nanotube interactions in the MWCNT‐loaded materials. Loading of silane‐functionalized MWCNTs in the ENR matrix resulted in a significant improvement in the mechanical, electrical and thermal degradation properties of the composite materials, when compared to gum or pristine MWCNT‐loaded materials.© 2013 Society of Chemical Industry     

Chemical surface coating of MWCNTs with riboflavin and its application for the production of poly(ester‐imide)/MWCNTs composites containing 4,4′‐thiobis(2‐tert‐butyl‐5‐methylphenol) linkages: Thermal and morphological properties

In this work, carboxylated multi‐walled carbon nanotubes (MWCNTs) were functionalized with riboflavin as a biological molecule under microwave irradiation. Solution blending method was used to incorporate different modified MWCNTs content (5, 10, and 15 wt %) into a chiral and biodegradable poly(ester‐imide) (PEI) to fabricate PEI‐based nanocomposites. The products were characterized for assessing the spectroscopic, thermal, and morphological properties by Fourier‐transform infrared spectroscopy, thermogravimetric analysis (TGA), X‐ray diffraction, transmission electron microscopy (TEM), and field‐emission scanning electron microscopy (FESEM). Optically active PEI was prepared by step‐growth polymerization of amino‐acid‐based diacid and aromatic diol. Functionalized MWCNTs were well dispersed in the PEI matrix and their distribution was homogeneous. This was confirmed by morphology study of the fractured surfaces of nanocomposites by FESEM and TEM. The addition of functionalized MWCNTs improved the thermal stability of NCs compared to the pure PEI. It was found from TGA data that temperature at 10% weight loss was increased from 409°C for pure PEI to 417, 420, and 424°C for nanocomposites containing 5, 10, and 15% functionalized MWCNTs, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42908.     

Bio‐based hyperbranched polyurethane/multi‐walled carbon nanotube nanocomposites as shape memory materials

Mesua ferrea L. seed oil based hyperbranched polyurethane/multi‐walled carbon nanotube nanocomposites were prepared by solution polymerization technique. The multi‐walled carbon nanotubes were modified with the polyoxyethylene octyl phenyl ether (Triton X‐100). The transmission electron microscopy and Fourier transform infrared spectroscopic study revealed the homogeneous distribution of the multi‐walled carbon nanotubes in the polymer matrix and the presence of strong interfacial interaction between them, respectively. The tensile strength (5.5–21.5 MPa) and scratch resistance (3–6.1 kg) increase with the increase of the content of carbon nanotubes (0 to 2 wt%). The thermo‐gravimetric analysis result showed the increment of thermal stability (240–275°C) of the nanocomposites. All the prepared nanocomposites exhibited the excellent shape fixity and shape recovery. The shape recovery time decreases (127–73 s) with the increase of the concentration of carbon nanotubes in the nanocomposites. Thus the prepared nanocomposites might be utilized as advanced shape memory applications. POLYM. COMPOS., 35:636–643, 2014. © 2013 Society of Plastics Engineers     

Multiwalled carbon nanotubes‐reinforced isotactic polypropylene nanocomposites: Enhancement of crystallization and mechanical,thermal, and electrical properties

Multiwalled carbon nanotubes (MWCNTs)‐reinforced isotactic polypropylene (iPP) nanocomposites with low‐content of MWCNTs were fabricated using the melt‐cast techniques. The reinforced plastics were characterized by X‐ray diffraction (XRD) measurements, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, mechanical test, differential thermal analyses (DTA), and electrical tests. XRD studies exhibit the α‐crystal in the injection‐molded neat iPP with lamellar stacks having a long period of 150Å. Both the intensity of lamellar reflection and the thickness of long period increase with increasing the MWCNTs contents, indicating an enhancement of iPP crystallization by MWCNTs addition. This increase of lamellar thickness is analyzed to be consistent with that evaluated by DTA. SEM micrographs display larger MWCNTs aggregates with increasing amount of reinforcements and show a good adhesion between nanoparticles and iPP matrix. FTIR spectra reveal distinct chemical textures for the samples and confirm the existence of α‐crystal. Mechanical strengths, electrical conductivity, and dielectric constants are found to increase with increasing MWCNTs content, representing an improved performance of the nanocomposites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Synthesis of Bio-Based Polyamide/Acid-Functionalized Multiwalled Carbon Nanotube Nanocomposites Using Vanillin

Synthesis of bio-based polyamide/acid-functionalized multiwalled carbon nanotube nanocomposites (PA/FCNT NCs) is reported in this investigation. New aliphatic–aromatic bio-based polyamide (PA) was synthesized through direct polycondensation reaction between bio-based diacid derived from a renewable resource; vanillin and diamine containing ether linkages. To obtain a homogeneous dispersion of multiwalled carbon nanotubes (MWCNTs) in the PA matrix, acid-functionalized MWCNTs (FCNTs) were used and PA nanocomposites with three different FCNT contents (1, 5 and 7?wt%) were prepared. The resulting NCs were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and thermogravimetric analysis (TGA).     

Synthesis of mechanically robust antimicrobial nanocomposites by click coupling of hyperbranched polyurethane and carbon nanotubes

This study demonstrates that mechanically robust antimicrobial nanocomposites of multiwalled carbon nanotubes (MWCNTs) and hyperbranched polyurethane (HBPU) can be prepared via a click chemistry reaction. Various compositions of HBPU-functionalized MWCNTs were synthesized from reactions of azide moiety-containing HBPU with alkyne-functionalized MWCNTs. The HBPU-functionalized MWCNTs were characterized morphologically using transmission electron microscopy and field emission scanning electron microscopy and chemically using Fourier transform infrared spectrometry, Raman spectroscopy, and X-ray photoelectron spectroscopy. The functionalized MWCNTs exhibited excellent dispersion in the HBPU matrix, and as a result, superior mechanical and strong antibacterial properties were obtained. The antimicrobial properties were examined by use of gram-negative bacteria Escherichia coli (E. coli). Consequently the click coupled bonding of MWCNTs with HBPU was very efficient for regulating the composite properties and achieving high performance materials.     

The preparation,characterization, and properties of silver nanoparticle reinforced reduced graphene oxide–poly(amidoamine) nanocomposites

A simple approach was employed to synthesize silver nanoparticle (Ag NP) reinforced reduced graphene oxide–poly(amidoamine) (Ag‐r‐RGO–PAMAM) nanocomposites. The structural changes of the nanocomposites with the PAMAM and Ag NPs were confirmed by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, Raman spectroscopy, and scanning electron microscopy. In addition, the performance was characterized with thermogravimetric and electrical conductivity instruments. The results indicate that the Ag NPs are well dispersed in fine size on the surface of the RGO–PAMAM composites, which results in an increase of at least 38% in thermostability and a certain enhancement in electrical conductivity. It is worth noting that the electrical conductivity of the nanocomposites was approximately 5.88 S cm^?1, which was higher than that of RGO–PAMAM, and increases with the rising content of silver nanoparticles. Meanwhile, the Ag‐r‐RGO–PAMAM nanocomposites still maintain a favorable dispersion in organic solvents. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45172.     

Polyurethane nanocomposites with click‐coupled nanodiamonds exhibiting enhanced mechanical and shape memory effects

Poly(?‐caprolactone)diol (PCL)–functionalized nanodiamonds (f‐NDs) were synthesized using a click chemistry reaction between the azide‐moiety PCL and alkyne‐moiety NDs and were incorporated into shape memory polyurethane (PU) at f‐ND concentrations of 0, 0.5, 1, and 2 wt % to produce high‐performance shape memory nanocomposites. The PU/f‐ND nanocomposites exhibited better shape recovery, shape recovery stress, and breaking stresses than pure PU. Shape recovery of greater than 95% was demonstrated for all the nanocomposites in the third cycle, and the shape recovery stresses increased significantly with the f‐ND content. These enhanced mechanical and shape recovery properties are ascribed to increased interactions between the f‐NDs and PU matrix due to incorporation of click‐coupled f‐NDs. The click‐coupled NDs can be used as nanofillers to enhance the mechanical and shape memory properties of polymers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45465.     

Electrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes composites

Polyacrylonitrile (PAN)/Multiwalled carbon nanotube (MWCNT) nanocomposites were prepared by nonconventional ultrasonic‐assisted emulsifier free emulsion polymerization technique with variable percentage of functionalized carbon nanotube. PAN/MWCNT nanocomposites were characterized by ultraviolet‐visible (UV‐visible) spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The result from UV‐visible suggested that the functionalized MWCNT had interfacial interaction with PAN matrices. The surface morphology of functionalized MWCNT and PAN/MWCNT nanocomposites were studied by scanning electron microscopy (SEM). Electrical properties of PAN/MWCNT nanocomposites were measured and the result indicated that the conductivity increased with increasing concentration of MWCNTs. The oxygen permeability of PAN/MWCNT nanocomposites gradually increased with increase of MWCNT concentration, the result which was in agreement with the vertical alignment ofMWCNT in SEM. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

In situ microwave‐assisted polymerization of polyethylene terephtalate in layered double hydroxides

The synthesis of poly(ethylene terephthalate) (PET)/layered double hydroxide (LDH) nanocomposites through microwave methods has been investigated. To enhance the compatibility between the PET polymer and the LDH, dodecyl sulfate was intercalated in the lamellar structure. The organo‐LDH structure was confirmed by powder X‐ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR). PET nanocomposites were prepared with 0–10 wt % of LDH content by in situ microwave‐assisted polymerization. PXRD was used to detect the formation of the exfoliated PET/LDH nanocomposites. Transmission electron microscopy was used to observe the dispersed layers and to confirm the exfoliation process. FTIR spectroscopy confirmed that the polymerization process had occurred. TG and DTA are used to study changes in thermal stability of the nanocomposites, which resulted enhanced by well dispersed LDHs layers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal‐initiated hydroxyethyl methacrylate functionalization of multiwalled carbon nanotubes

Multiwalled‐carbon nanotubes (MWCNTs) were functionalized via thermoinitiated free radical polymerization of 2‐hydroxyethyl methacrylate (HEMA) using benzoyl peroxide. Tip sonication was used during the polymerization reaction to separate agglomerated nanotubes. The functionalization was confirmed by control experiments and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR). Differential scanning calorimetry indicated that the addition of poly(HEMA)‐MWCNTs to a two‐component polyurethane coating will have little effect on the glass transition temperature of the coating. The poly(HEMA)‐functionalized MWCNTs formed large colloidal structures of highly dispersed nanotubes in both the nonsheared and sheared coatings as determined by atomic force microscopy. This study determined a quick and easy method to functionalize MWCNTs for incorporation into a two‐component polyurethane coating. A simple method for producing ordered structures of the MWCNTs via shear observed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of octa(aminopropyl) polyhedral oligomeric silsesquioxane (OapPOSS) functionalized graphene oxide on the mechanical,thermal, and hydrophobic properties of waterborne polyurethane composites

A novel graphene nanomaterial functionalized by octa(aminopropyl) polyhedral oligomeric silsesquioxane (OapPOSS) was synthesized and then confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy with energy‐dispersive X‐ray spectroscopy (SEM EDX), atomic force microscopy, and X‐ray diffraction. The obtained functionalized graphene (OapPOSS‐GO) was used to reinforce waterborne polyurethane (WPU) to obtain OapPOSS‐GO/WPU nanocomposites by in situ polymerization. The thermal, mechanical, and hydrophobic properties of nanocomposites as well as the dispersion behavior of OapPOSS‐GO in the polymer were investigated by TGA, a tensile testing machine, water contact angle tests, and field emission SEM, respectively. Compared with GO/WPU and OapPOSS/WPU composites, the strong interfacial interaction between OapPOSS‐GO and the WPU matrix facilitates a much better dispersion and load transfer from the WPU matrix to the OapPOSS‐GO. It was found that the tensile strength of the OapPOSS‐GO/WPU composite film with 0.20 wt % OapPOSS‐GO exhibited a 2.5‐fold increase in tensile strength, compared with neat WPU. Better thermal stability and hydrophobicity of nanocomposites were also achieved by the addition of OapPOSS‐GO. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44440.     

Efficient functionalization of multi‐walled carbon nanotubes with p‐aminophenol and their application in the fabrication of poly(amide‐imide)‐matrix composites

The ultrasonically assisted preparation and characterization of poly(amide‐imide) (PAI) composites containing functionalized multi‐walled carbon nanotubes (MWCNTs) are reported. To improve the dispersion in and compatibility with the polymer matrix, the MWCNTs were surface‐modified with p‐aminophenol (p‐AP) under microwave irradiation. The process is fast, one‐pot, easy and results in a high degree of functionalization as well as dispersibility in organic solvents. The p‐AP‐functionalized MWCNTs (MWCNTs‐AP) were analysed by means of field emission and transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction and thermogravimetric analysis (TGA). The results consistently confirm the formation of p‐AP functionalities on MWCNTs which are able to undergo additional reactions, while the structure of the MWCNTs remains relatively intact. MWCNTs‐AP/PAI hybrid films were prepared with various MWCNTs‐AP contents (5–15 wt%) using a solution‐casting technique. Microscopic observations show that the dispersion of the MWCNTs‐AP is improved as a result of the organic groups on the MWCNT surface and functional groups in the PAI structure. The properties of the obtained composites were characterized extensively using the aforementioned techniques. TGA results show that the hybrid films exhibit a good thermal stability. Tensile mechanical testing was performed for the prepared composites, the results of which indicate an increase in the elastic modulus and tensile strength with increasing MWCNTs‐AP content. © 2013 Society of Chemical Industry     

Analyzing the influence of different synthetic talcs in waterborne polyurethane nanocomposites obtainment

Waterborne polyurethane (WPU) nanocomposites were produced utilizing synthetic talc in gel form in order to improve its physical–chemical properties. Synthetic talc manufactured in nano‐gel form are interesting because their interaction with water occurs through hydrogen bonding favoring fillers dispersion within the WPU matrix. WPUs are environmental friendly materials because no organic solvents are used in its production. The nanocomposites obtained with the three synthetic talc nano‐gel fillers presented a good dispersion even when higher amounts of fillers were added, as seen by X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, and atomic force microscopy analyses. The addition of synthetic talcs improved WPU nanocomposites mechanical properties. Storage and loss modulus results proved fillers incorporation into the WPU matrix corroborating with Fourier transform infrared spectroscopy results. Results demonstrated that synthetic talcs in nano‐gel form are interesting to obtain WPU nanocomposites with superior mechanical properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46107.     

Preparation of polybenzimidazole/functionalized carbon nanotube nanocomposite films for use as protective coatings

Functionalized multi‐walled carbon nanotubes (MWCNTs) via microwave‐induced polymerization modification route, and polybenzimidazole (PBI) nanocomposite films containing 0.1‐5 wt% functionalized MWCNTs were successfully synthesized. The functionalized MWCNTs were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS). The results verify that the polymer was successfully grafted to the MWCNTs with a polymer layer that was several nanometers thick. The TGA results showed that the quantity of the attached polymer reached approximately 9.4 wt%. The mechanical properties of the nanocomposite films were measured by tensile test and dynamic mechanical analysis (DMA). The tensile test results indicated that the Young's modulus increased by about 43.9% at 2 wt% CNT loading, and further modulus growth was observed at higher filler loading. The DMA studies indicated that the nanocomposite films had a higher storage modulus than pure PBI film in the temperature range of 30‐300°C, and the storage modulus was maintained above 0.82 GPa. Simulation results confirmed that the PBI nanocomposite films had desirable mechanical properties for use as a protective coating. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers.     

Novel method of dispersion of multiwalled carbon nanotubes in a flexible epoxy matrix

We describe a simple and novel method for dispersing multiwalled carbon nanotubes (MWCNTs) in a flexible epoxy matrix. The MWCNTs were modified with half‐neutralized dicarboxylic acids having different numbers of carbon atoms. The modified MWCNTs were prereacted with epoxy in the presence of triphenylphosphine. The dispersion of the MWCNTs and the enhancement in the tensile properties were found to be better for composites prepared with a solvent. Among the half‐neutralized dicarboxylic acids used, half‐neutralized adipic acid (HNAA) exhibited the best performance. Scanning electron microscopy and transmission electron microscopy studies clearly indicated an improvement in the level of dispersion of the MWCNTs with the addition of the modifier. The good dispersion of the MWCNTs and the resulting improvement in their properties were attributed to the cation–π interactions (the cation of HNAA and the π‐electron clouds of the MWCNTs) between the HNAA and MWCNTs and the chemical bonding of ? COOH groups of HNAA and the epoxy resin. The cation–π interaction and chemical bonding was assessed with Fourier transform infrared spectroscopy and Raman spectroscopy. This approach did not destroy the π–electron clouds of the MWCNTs in contrast to a chemical functionalization strategy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2610–2618, 2013     

Grafting of polymer chains on the surface of carbon nanotubes via nitroxide radical coupling reaction

Poly(butylene succinate) (PBS) was grafted on the surface of TEMPO (2,2,6,6‐tetramethyl‐1‐piperidinyloxy) modified multi‐walled carbon nanotubes (MWCNTs) via a nitroxide radical coupling reaction. TEMPO functionalized MWCNTs (MWCNTs‐g‐TEMPO) were synthesized using the Cu(I)‐catalyzed azide/alkyne click chemistry approach and the covalent bond of the nitroxide moieties onto the MWCNTs was confirmed via electron paramagnetic resonance (EPR) spectroscopy. The PBS grafting on the sidewalls of MWCNTs was carried out in solution via peroxide‐induced formation of macroradicals and it was confirmed by EPR and attenuated total reflectance Fourier transform infrared analysis. Preliminary rheological and calorimetric analyses revealed that the grafting improves both the quality of stress transfer across the polymer ? nanotube interface and the degree of dispersion of the filler, which also exhibited a moderate nucleating action on the PBS. Overall, our results demonstrate that nitroxide radical coupling is an efficient and feasible ‘grafting to’ method to covalently bond polymer chains on MWCNTs with possible advantages in the final properties of the polymer nanocomposites. © 2015 Society of Chemical Industry     

Development of multiwalled‐carbon‐nanotube‐welded carbon fibers and evaluation of the interfacial strength in epoxy composites

Multiwalled carbon nanotube (MWCNT)‐welded carbon fibers (CFs) were prepared by a three‐step process, which included polyacrylonitrile (PAN) coating, MWCNT absorption, and heat treatment. The structure of these materials was characterized by scanning electron microscopy, Fourier‐transform infrared spectroscopy, and Raman spectroscopy. The MWCNTs were uniformly assembled on the surface of the PAN‐coated CFs and welded by a PAN‐based carbon layer after heat treatment. The contact angle of the MWCNT‐welded CFs in the epoxy resins was 41.70°; this was 22.35% smaller than that of the unsized CFs. The interfacial shear strength (IFSS) of the MWCNT‐welded CF–epoxy composite was 83.15 MPa; this was 28.89% higher than that of the unsized CF–epoxy composite. The increase in the IFSS was attributed to the enhancement of adhesions between the CFs and polymer matrix through the welding of the MWCNTs on the CFs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45027.