Phototransparency and water vapor sorption properties of ABA‐type triblock copolymers derived from 6FDA‐TeMPD and poly(2‐methyl‐2‐adamantylmethacrylate)

The phototransparency and water vapor sorption properties of ABA‐type triblock copolymer membranes derived from 4,4‐(hexafluoroisopropylidene) diphthalic anhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (PI) and poly(2‐methyl‐2‐adamantylmethacrylate) (PMAdMA) were investigated, with focus on the effect of the adamantane component. The phototransparency of PMAdMA‐block‐PI‐block‐PMAdMA [Block(PI/PMAdMA)] was about 10–20% higher than that of poly(methyl methacrylate)‐block‐PI‐block‐Poly(methylmethacrylate) [Block(PI/PMMA)] because the high symmetric structure of adamantane inhibited photoabsorbance. The water vapor solubility of Block(PI/PMAdMA) decreased with increased PMAdMA because the PMAdMA had a hydrophobic property. Interestingly, in all relative‐pressure regions, Block(PI/PMAdMA) with the least PMAdMA content showed a higher solubility coefficient than PI because the high mobility of PMAdMA in Block(PI/PMAdMA) resulted in additional sorption sites in the PI segment. A comparison of Block(PI/PMAdMA) with Block(PI/PMMA) in terms of relative pressure at the beginning of clustering further revealed that cluster formation in Block(PI/PMAdMA) was inhibited compared with Block(PI/PMMA) because bulky structure of adamantane restricted the mobility of the polymer main chain. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43795.     

Synthesis and gas permeability of ABA‐type triblock copolymers derived from fluorine‐containing polyimide with polyhedral oligomeric silsesquioxane

ABA‐type triblock copolymers derived from 4,4'‐(hexafluoroisopropylidene)diphthalicanhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) and methacryl phenyl polyhedral oligomeric silsesquioxane (MPPOSS) were synthesized by atom transfer radical polymerization. The chemical structure of the synthesized ABA‐type triblock copolymer was confirmed by ¹H NMR, ¹³C NMR, ²⁹Si NMR and Fourier transform infrared analyses. The ratios of 6FDA‐TeMPD and MPPOSS determined by TGA were 94/6, 85/15, 77/23, 68/32, 57/43 and 31/69. The film density of the ABA‐type triblock copolymer films did not conform to the mixing rule because of polyimide (PI) chain aggregation. Based on contact angle and water uptake analyses, the hydrophobicity of the ABA‐type triblock copolymer film was determined to be higher than the theoretical value because of POSS cage effects and PI chain aggregation. The gas permeability coefficient of the ABA‐type triblock copolymer decreased compared with that of PI because of aggregation of PI chains and inhibition of solubility decreases by substitutes with high affinity. ABA‐type triblock copolymer CO₂/H₂ separation performance increased compared with that of PI. The ABA‐type triblock copolymer derived from PI and MPPOSS can be described as a polymer material with higher hydrophobicity and higher CO₂/H₂ selectivity than PI. © 2015 Society of Chemical Industry     

Solid and thermal properties of ABA‐type triblock copolymers designed using difunctional fluorine‐containing polyimide macroinitiators with methyl methacrylate

BACKGROUND: ABA‐type poly(methyl methacrylate) (PMMA) and fluorine‐containing polyimide triblock copolymers are potentially beneficial for electric materials. In the work reported here, triblock copolymers with various block lengths were prepared from fluorine‐containing difunctional polyimide macroinitiators and methyl methacrylate monomer through atom‐transfer radical polymerization. The effects of structure on their solid and thermal properties were studied. RESULTS: The weight ratios of the triblock copolymers derived using thermogravimetric analysis were shown to be almost identical to the ratios determined using ¹H NMR. The solid properties (film density and maximum d‐spacing value) and thermal properties (glass transition and thermal expansion) were shown to be strongly dependent on the weight ratios of both PMMA and polyimide components. Furthermore, a porous film, which showed a lower dielectric constant of 2.48 at 1 MHz, could be prepared by heating a triblock copolymer film to induce the thermal degradation of the PMMA component. CONCLUSION: The use of the polyimide macroinitiator was useful in the preparation of ABA‐type triblock copolymers to control each block length that influences the solid and thermal properties. Additionally, the triblock copolymers have great potential in preparing porous polyimides in the application of electric materials as interlayer insulation membranes of large‐scale integration. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of ABA triblock and novel multiblock copolymers from ethylene glycol,L‐lactide,and ϵ‐caprolactone

Three types of copolymers were synthesized and characterized. First, triblock ABA copolymers [where A is a homopolymer of ?‐caprolactone and B is poly(ethylene glycol)] were prepared by the ring‐opening polymerization of poly(ethylene glycol) with ?‐caprolactone in the presence of stannous octoate (Sn(Oct)₂). The spectral, thermal, and mechanical properties of one sample of these copolymers were studied, and it was discovered that these types of copolymers were more hydrophilic, possessed lower melting points, and had superior mechanical properties (greater toughness) than poly(?‐caprolactone). Second, triblock ABA copolymers [where A is a homopolymer of L ‐lactide and B is poly(ethylene glycol)] were prepared by the ring‐opening polymerization of poly(ethylene glycol) with L ‐lactide in the presence of Sn(Oct)₂. The mechanical properties of these copolymers were studied, and it was found that they were tougher and softer than poly(L ‐lactide). Third, novel ABA triblock copolymers [where A is a copolymer of ?‐caprolactone and L ‐lactide and B is poly(ethylene glycol)] were prepared, and ¹H‐NMR and ¹³C‐NMR spectra of these copolymers indicated a microblock structure for the two end blocks. The stress–strain behavior revealed low yields and high toughness for these copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2072–2081, 2002     

Synthesis and characterization of ABA‐type block copolymers of trimethylene carbonate and ϵ‐caprolactone

This paper describes the synthesis of a series of ABA‐type triblock copolymers of trimethylene carbonate and ?‐caprolactone with various molar ratios and analyses the thermal and mechanical properties of the resulting copolymers. The structures of the triblock copolymers were characterized by ¹H and ¹³C nuclear magnetic resonance spectroscopy, FT‐IR spectroscopy and gel permeation chromatography. Results obtained from the various characterization methods proves the successful synthesis of block copolymers of trimethylene carbonate and ?‐caprolactone. The thermal properties of the block copolymers were investigated by differential scanning calorimetry. The T_m and ΔH_m values of the copolymers decrease with increasing content of trimethylene carbonate units. Two T_gs were found in the copolymers. Furthermore, both of the T_g values increased with increasing content of trimethylene carbonate units. The mechanical properties of the resulting copolymers were studied by using a tensile tester. The results indicated that the mechanical properties of the block copolymers are related to the molar ratio of trimethylene carbonate and ?‐caprolactone in the copolymers, as well as the molecular weights of the resulting copolymers. The block copolymer with a molar composition of 50/50 possessed the highest tensile stress at maximum and modulus of elasticity. Block copolymers possessing different properties could be obtained by adjusting the copolymer compositions. Copyright © 2004 Society of Chemical Industry     

Preparation of porous membranes by selective decomposition of adamantane unit in ABA‐type triblock copolymer

The mechanism of pore formation by selective decomposition of adamantane unit in an ABA‐type triblock copolymer derived from 4,4‐(hexafluoroisopropylidene)diphthalic anhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) and poly(2‐methyl‐2‐adamantylmethacrylate) (PMAdMA) was investigated on this basis. This study aims to developing a novel method of material design for high‐precision gas separation membranes and application to electric devices by improving dielectric constant. Scanning electron microscopy images showed that the membrane structure changed considerably after heating; the difference increased with the increase in adamantane content. Interestingly, the internal structure of Block(36 mol%6FDA‐TeMPD/64 mol%PMAdMA) membrane was almost unchanged although its surface structure was changed. These results suggest that the mechanism of formation of porous membrane involves the decomposition of adamantane unit from surface. In addition, more adamantane units inside the membrane were discharged to the surface of the membrane through a path formed by decomposed adamantane units. POLYM. ENG. SCI., 56:1191–1200, 2016. © 2016 Society of Plastics Engineers     

Characterization and water vapor sorption property of ABA‐type triblock copolymers derived from polyimide and poly(methyl methacrylate)

The characterization of ABA‐type triblock copolymer films derived from polyimide (PI) macroinitiator and poly(methyl methacrylate) (PMMA) synthesized by atom transfer radical polymerization was investigated by focusing on different block lengths of PMMA. The hydrophobic property tends to increase with increasing PMMA content in the triblock copolymers, while the PMMA blocks enhance the charge transfer interaction between the PI segments. The water vapor sorption measurement of triblock copolymers was determined at 35 °C. The water vapor solubility of triblock copolymers tends to decrease with increasing PMMA content. In addition, linear correlations were observed between the solubility and polymer‐free volume and polymer molecular polarity in triblock copolymers as well as in other conventional polymer families. According to Zimm?Lundberg analysis, the PMMA block segments in the triblock copolymers accelerate water vapor clustering due to the high mobility of PMMA. The mobility of PMMA block segments strongly affected not only physical properties but also the water vapor solubility of the triblock copolymers. The ABA triblock copolymerization composed of PI and PMMA is one of the effective ways to improve the hydrophobic property. © 2013 Society of Chemical Industry     

Synthesis and characterization of polyrotaxanes comprising α‐cyclodextrins and poly(ε‐caprolactone) end‐capped with poly(butyl methacrylate)s

Biodegradable polyrotaxane‐based triblock copolymers were synthesized via the bulk atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) initiated with polypseudo‐rotaxanes (PPRs) built from a distal 2‐bromoisobutyryl end‐capped poly(ε‐caprolactone) (Br‐PCL‐Br) with α‐cyclodextrins (α‐CDs) in the presence of Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 45 ºC. The structure was characterized in detail by means of ¹H NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, DSC and TGA. When the feed molar ratio of BMA to Br‐PCL‐Br was changed from 128 to 300, the degree of polymerization of PBMA blocks attached to two ends of the PPRs was in the range 382 ? 803. Although about a tenth of the added α‐CDs were still threaded onto the PCL chain after the ATRP process, the movable α‐CDs made a marked contribution to the mechanical strength enhancement, blood anticoagulation activity and protein adsorption repellency of the resulting copolymers. Meanwhile, they could also protect the copolymers from the attack of H₂O and Lipase AK Amano molecules, exhibiting a lower mass loss as evidenced in hydrolytic and enzymatic degradation experiments. © 2013 Society of Chemical Industry     

Synthesis and characterization of hydroxy‐terminated polyether‐polydimethylsiloxane‐polyether (PE‐PDMS‐PE) triblock oligomers and their use in the preparation of thermoplastic polyurethanes

A series of hydroxy‐terminated polyether‐polydimethylsiloxane‐polyether (α,ω‐dihydroxy‐(PE‐PDMS‐PE)) ABA triblock oligomers were synthesized from silanic fluids and methyl polyallyloxide polyethers. The reaction was a one‐step solventless hydrosilylation reaction with chloroplatinic acid (CPA) catalyst in the presence of heat. These ABA oligomers were characterized via ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR, FT‐IR, and GPC to demonstrate that they exhibit a 100% linear ABA structure with a siloxane Si? O chain in the center and polyether ethylene oxide (EO)/propylene oxide (PO) chains on the two sides terminated by hydroxy groups. The triblock oligomers were used to form thermoplastic polyurethanes (TPUs) using two‐step solventless bulk polymerization. The investigation of triblock oligomers impact on TPUs mechanical properties, thermal performance, surface water repellency, and morphology performance were analyzed by Instron material tester, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), water contact angles (WCA), scanning electron microscope (SEM), and transmission electron microscope (TEM). DSC and TGA indicated that PE‐PDMS‐PE modified TPUs had a clear lower T_g under ?120°C and the temperature of 50% weight loss was improved from 280 to 340°C. PE‐PDMS‐PE–modified TPU did not have the marked reduction on mechanical properties than pure polyether produced TPU. Tensile strength was maintained at 13 MPa and elongation was maintained at 300%. SEM and TEM were used to investigate the copolymers’ morphology performance and found that all PO PE‐PDMS‐PE had a pseudo‐three phase separation. WCA analysis confirmed that PE‐PDMS‐PE–modified TPU had significantly improved hydrophobic performance because the silicone structure linked into TPU copolymers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42521.     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Influence of semi‐crystalline poly(ε‐caprolactone) and non‐crystalline polylactide blocks on the thermal properties of polydimethylsiloxane‐based block copolymers

Poly(A)‐block‐poly(B), poly(A)‐block‐poly(B)‐block‐poly(A) and B(A)₂ block copolymers were prepared through coordinated anionic ring‐opening polymerization of ε‐caprolactone (CL) and lactic acid (LA) using hydroxy‐terminated polydimethylsiloxane (PDMS) as initiator. A wide range of well‐defined combinations of PDMS‐block‐PCL and PDMS‐block‐PLA diblock copolymers, PCL‐block‐PDMS‐block‐PCL and PLA‐block‐PDMS‐block‐PLA triblock copolymers and star‐PDMS(PCL)₂ copolymers were thus obtained. The number‐average molar masses and the structure of the synthesized block copolymers were identified using various analytical techniques. The thermal properties of these copolymers were established using differential scanning calorimetry. Considering PDMS‐block‐PCL copolymers, the results demonstrate the complex effect of polymer architecture and PCL block length on the ability of the PDMS block to crystallize or not. In the case of diblock copolymers, crystallization of PCL blocks originated from stacking of adjacent chains inducing the extension of the PDMS block that can easily crystallize. In the case of star copolymers, the same tendency as in triblock copolymers is observed, showing a limited crystallization of PDMS when the length of the PCL block increases. In the case of PDMS‐block‐PLA copolymers, melting and crystallization transitions of the PLA block are never observed. Considering the diblock copolymers, PDMS sequences have the ability to crystallize. © 2019 Society of Chemical Industry     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Low‐κ nanocomposite films based on polyimides with grafted polyhedral oligomeric silsesquioxane

Nanocomposites of polyimides (PI) with covalently grafted polyhedral oligomeric silsesquioxane (R₇R′Si₈O₁₂ or POSS) units were prepared by thermally‐initiated free‐radical graft polymerization of methacrylcyclopentyl‐POSS (MA‐POSS) with the ozone‐pretreated poly[N,N′‐(1,4‐phenylene)‐3,3′,4,4′‐benzophenonetetra‐carboxylic amic acid] (PAA), followed by thermal imidization. The chemical composition and structure of the PI with grafted methacrylcyclopentyl‐POSS side chains (PI‐g‐PMA‐POSS copolymers) were characterized by nuclear magnetic resonance (NMR), X‐ray diffraction (XRD), and thermogravimetric analysis (TGA). The POSS molecules in each grafted PMA side chain of the amorphous PI films retained the nanoporous crystalline structure, and formed an aggregate of crystallites. The PI‐g‐PMA‐POSS nanocomposite films had both lower and tunable dielectric constants, in comparison with that of the pristine PI films. Dielectric constants (κ's) of about 3.0–2.2 were obtained. The present approach offers a convenient way for preparing low‐κ materials based on existing PI's. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Gas transport and optical properties of ABA‐type triblock copolymers designed using fluorine‐containing polyimide macroinitiators with methyl methacrylate

4,4'‐(Hexafluoroisopropylidene) diphthalic anhydride 2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) polyimide macroinitiator was synthesized and reacted with poly(methyl methacrylate) (PMMA) to form an ABA‐type triblock copolymer by atom transfer radical polymerization. The effect of the ABA‐type triblock copolymer structure on solid, thermal, optical and gas transport properties was systematically investigated and compared with the physical blend polymer. The blend polymer was cloudy, whereas the triblock copolymer was colorless and transparent. The PMMA component decomposition temperature for the triblock copolymer slightly shifted to higher temperature, while its gas barrier property was higher than the blend polymer. The refractive index and the gas permeability decreased while maintaining the heat resistance by a high nanoscale distribution of both polymer components. The 6FDA‐TeMPD/PMMA ABA‐type triblock copolymer can be described as a polymer material with high heat resistance, high gas barrier property and low refractive index amongst existing polymers. © 2013 Society of Chemical Industry     

Hyperbranched–linear–hyperbranched ABA‐type block copolymers based on poly(ethylene oxide) and polyglycerol

BACKGROUND: Until recently, hyperbranched polymers were thought to be ill‐defined materials that were not useful as building blocks for well‐defined complex polymer architectures. It is a current challenge to develop strategies that offer rapid access to well‐defined hyperbranched block copolymers. RESULTS: A convenient three‐step protocol for the synthesis of double‐hydrophilic hyperbranched–linear–hyperbranched ABA‐type triblock copolymers based on poly(ethylene oxide) (PEO) and hyperbranched polyglycerol (hbPG) is presented. The Bola‐type polymers exhibiting an aliphatic polyether structure were prepared from a linear (lin) linPG‐b‐PEO‐b‐linPG precursor triblock. The materials exhibit low polydispersities (M_w/M_n) in the range 1.19–1.45. The molecular weights of the block copolymers range from 6300 to 26 200 g mol^?1, varying in the length of both the linear PEO chain as well as the hbPG segments. Detailed characterization of the thermal properties using differential scanning calorimetry demonstrates nanophase segregation of the blocks. CONCLUSION: The first example of well‐defined ABA hyperbranched–linear–hyperbranched triblock copolymers with PEO middle block and hbPG A‐blocks is presented. The biocompatible nature of the aliphatic polyether blocks renders these materials interesting for biomedical purposes. These new materials are also intriguing with respect to their supramolecular order and biomineralization properties. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel polyethylene‐b‐polyurethane‐b‐polyethylene triblock copolymers: Facile synthesis and application

A series of novel polyethylene‐b‐polyurethane‐b‐polyethylene (EUE) triblock copolymers is successfully prepared through a facile route combining the thiol‐ene chemistry, addition polymerization, and coupling reaction. The resulting EUE triblock copolymers are characterized by Nuclear magnetic resonance (¹H NMR), Fourier transform‐infrared spectra (FT‐IR), High temperature gel permeation chromatography (HT‐GPC), Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), and Transmission electron microscopy (TEM). In addition, the EUE triblock copolymers have been evaluated as compatibilizers in the polymer blends of thermoplastic polyurethane elastomer (TPU) and high‐density polyethylene (HDPE). The SEM results show that the compatibility of immiscible blends is enhanced greatly after the addition of EUE triblock copolymers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42967.     

Effects of thermal treatment on the CO2 sorption of triblockcopolymers derived from polyimide and poly(methylmethacrylate)

ABA‐type triblock copolymers were synthesized using 4,4‐(hexafluoroisopropylidene) diphthalic anhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) and poly(methyl methacrylate) (PMMA). The films were characterized by determining the effects of different content ratios and thermal decomposition of PMMA block on CO₂ sorption properties. TGA results showed that a thermal labile block can be completely decomposed under a previously reported thermal condition. SEM results presented that the asperity was micro‐phase separation caused by the PMMA block content rate. Numerous pores with sizes of approximately 10 to 50 nm were detected on Block(28/72) and Block(10/90). The isotherms of all films fitted the dual‐mode sorption model, and CO₂ sorption decreased with increased PMMA content rate. Infinite‐dilution CO₂ solubility depended on the Langmuir's site of each polymer because S_H0/S₀ of PI and Block(PI/PMMA) varied from 0.84 to 0.92 CO₂ affinity was increased by thermal treatment as indicated by the higher b and S₀ values of thermally treated films than those of nontreated films. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42208.