1,2,3‐Triazolium‐Based Cationic Amphipathic Peptoid Oligomers Mimicking Antimicrobial Helical Peptides

Amphipathic cationic peptoids (N‐substituted glycine oligomers) represent a promising class of antimicrobial peptide mimics. The aim of this study is to explore the potential of the triazolium group as a cationic moiety and helix inducer to develop potent antimicrobial helical peptoids. Herein we report the first solid‐phase synthesis of peptoid oligomers incorporating 1,2,3‐triazolium‐type side chains and their evaluation against Escherichia coli, Enterococcus faecalis, and Staphylococcus aureus. Several triazolium‐based oligomers, even of short length, selectively kill bacteria over mammalian cells. SEM visualization of S. aureus cells treated with a dodecamer and a hexamer reveals severe cell membrane damage and suggests that the longer oligomer acts by pore formation.     

Behavior of α‐ and β‐cyclodextrin‐encapsulated allyl isothiocyanate as slow‐release additives in polylactide‐co‐polycaprolactone films

The natural antibacterial agent allyl isothiocyanate (AITC) encapsulated in either α‐ or β‐cyclodextrin (CD) has previously been evaluated as a slow‐release additive in polylactide‐co‐polycaprolactone (PLA–PCL) films designed for use in cheese packaging. In the research described in this article, thermogravimetric analysis (TGA) and thermogravimetric analysis in tandem with mass spectrometry (TGA–MS) were used to explore the thermal properties of CD‐encapsulated AITC complexes as well as those of PLA–PCL films containing these complexes. To our knowledge, this is the first reported application of the TGA–MS technique to explore the thermal stability of CD‐entrapped AITC and the first study to report differences in thermal stability of AITC in α‐and β‐CD cavities in the solid state. Observed differences in the thermal degradation profile of films containing the CD complexes can be explained if AITC binds more strongly to β‐CD than to α‐CD. This hypothesis has been reinforced by gas chromatography (GC) and high performance liquid chromatography (HPLC) studies, the results of which suggest that a new covalently bound AITC–CD complex may be formed when incorporating the β‐CD complex of AITC in PLA–PCL films but not when incorporating the α‐CD complex of AITC. This finding means that the α‐CD complex of AITC would be preferred in situations where adequate long‐term controlled release of AITC from polymer films is required, as for example in the case of active packaging applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

The β‐δ‐Phase Transition and Thermal Expansion of Octahydro‐1,3,5,7‐Tetranitro‐1,3,5,7‐Tetrazocine

Phase behavior of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX) is investigated by X‐ray powder diffraction (XRD). The XRD patterns at elevated temperature show that there is a co‐existing temperature range of β‐ and δ‐phase during the phase transition process. Additionally, mechanical forces can catalyze the conversion from δ‐ back to β‐phase. Based on the diffraction patterns of β‐ and δ‐phase at different temperatures, we calculate the coefficients of thermal expansion by Rietveld refinement. For β‐HMX, the linear coefficients of thermal expansion of a‐axis and b‐axis are about 1.37×10⁻⁵ and 1.25×10⁻⁴ °C⁻¹. A slight decrease in c‐axis with temperature is also observed, and the value is about −0.63×10⁻⁵ °C⁻¹. The volume coefficient of thermal expansion is about 1.60×10⁻⁴ °C⁻¹, with a 2.2% change from 30 to 170 °C. For δ‐HMX, the linear coefficients of thermal expansion of a‐axis and c‐axis are found to be 5.39×10⁻⁵ and 2.38×10⁻⁵ °C⁻¹, respectively. The volume coefficient of thermal expansion is about 1.33×10⁻⁴ °C⁻¹, with a 2.6% change from 30 to 230 °C. The results indicate that β‐HMX has a similar volume coefficient of thermal expansion compared with δ‐HMX, and there is about 10.5% expansion from β‐HMX at 30 °C to δ‐HMX at 230 °C, of which about 7% may be attributed to the reconstructive transition.     

Specificity of Donor Structures for endo‐β‐N‐Acetylglucosaminidase‐Catalyzed Transglycosylation Reactions

To demonstrate the structural specificity of the glycosyl donor for the transglycosylation reaction by using endo‐β‐N‐acetylglucosaminidase from Mucor hiemalis (endo‐M), a series of tetrasaccharide oxazoline derivatives was synthesized. These derivatives correspond to the core structure of an asparagine‐linked glycoprotein glycan with a β‐mannose unit of a non‐natural‐type monosaccharide, including β‐glucose, β‐galactose, and β‐talose in place of the β‐mannose moiety. The transglycosylation activity of wildtype (WT) endo‐M and two mutants, N175Q and N175A, was examined by using these tetrasaccharide donors with p‐nitrophenyl N‐acetylglucosaminide (GlcNAc‐pNp). The essential configuration of the hydroxy group for the transglycosylation reaction was determined. On the basis of these results, the transglycosylation reaction was investigated by using chemically modified donors, and transglycosylated products were successfully obtained.     

Structural Studies on 4,5‐Disubstituted 2‐Aminoimidazole‐Based Biofilm Modulators that Suppress Bacterial Resistance to β‐Lactams

A library of 4,5‐disubstituted 2‐aminoimidazole triazole amide (2‐AITA) conjugates has been successfully assembled. Upon biological screening, this class of small molecules was discovered as enhanced biofilm regulators through non‐microbicidal mechanisms against methicillin‐resistant Staphylococcus aureus (MRSA) and multidrug‐resistant Acinetobacter baumannii (MDRAB), with active concentrations in the low micromolar range. The library was also subjected to synergism and resensitization studies with β‐lactam antibiotics against MRSA. Lead compounds were identified that suppress the antibiotic resistance of MRSA by working synergistically with oxacillin, a β‐lactam antibiotic resistant to penicillinase. A further structure–activity relationship (SAR) study on the parent 2‐AITA compound delivered a 2‐aminoimidazole diamide (2‐AIDA) conjugate with significantly increased synergistic activity with oxacillin against MRSA, decreasing the MIC value of the β‐lactam antibiotic by 64‐fold. Increased anti‐biofilm activity did not necessarily lead to increased suppression of antibiotic resistance, which indicates that biofilm inhibition and resensitization are most likely occurring via distinct mechanisms.     

Correlation between the fracture toughness and β‐crystal fraction in a β‐nucleated propylene‐based propylene–ethylene random copolymer

Propylene‐based propylene–ethylene random copolymer (PPR) has been widely used in the production of hot‐water pipes. To further improve its toughness and thermal resistance, β‐nucleating agents (β‐NAs) are frequently incorporated. In this study, PPR containing 5.6 mol % ethylene units was modified by two kinds of β‐NAs, that is, calcium pimelate and N,N′‐dicyclohexylterephthalamide. The notched Izod impact strength of PPR increased with the addition of the β‐NAs. Drastically different toughening effects were found between the two β‐NAs. The structure of PPR with and without a β‐NA was investigated by calorimetry, X‐ray diffraction, and thermomechanical analysis. The results indicated that the relative fraction of β crystals (k_β) in the injection‐molded specimens was determined by the type and content of β‐NA. The relationship between k_β and the impact toughness was summarized. A critical value for k_β (0.68) was identified for the brittle–ductile transition of PPR. PPR with β‐NA having a k_β greater than 0.68 displayed a higher impact strength than the other mixtures. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42930.     

Physical State of β‐Carotene at High Concentrations in a Solid Triglyceride Matrix

The highly hydrophobic β‐carotene is often distributed or dissolved in triglycerides to enhance either nutritional or coloring effects. This study aims at elucidating the physical state of β‐carotene that at high concentrations are mixed into a solid high‐melting tri‐glyceride matrix by dissolution at high temperatures (165 °C) in the melted triglyceride. Extensive isomerization of β‐carotene is observed by HPLC after melting crystalline all‐trans β‐carotene and in the solid mixtures of β‐carotene and fully hydrogenated sunflower oil. Crystalline triglyceride is found in the mixed samples by XRPD analysis whereas no signs of crystalline lattice structures of β‐carotene are detected. DSC thermograms show only the melting and recrystallization events of triglycerides, which are affected by the presence of β‐carotene. Severe line broadening is observed in the ¹³C CP/MAS NMR spectra of the β‐carotene‐triglyceride mixtures when compared to crystalline β‐carotene, demonstrating the lack of long‐range order of the carotene. Altogether, the results demonstrate that β‐carotene is present as an amorphous mixture of trans‐ and cis‐isomers dispersed into a structure of crystalline triglyceride in the solid carotene‐triglyceride mixtures. Practical applications: The amorphous structure of trans‐ and cis‐isomers in solid formulations of β‐carotene‐triglyceride mixtures will strongly affect their functional properties related to nutrition and color as food ingredients.     

Investigation on β‐polypropylene/PP‐g‐MAH/ surface‐treated calcium carbonate composites

β‐Polypropylene composites containing calcium carbonate treated by titanate coupling agent (T‐CaCO₃) and maleic anhydride grafted PP (PP‐g‐MAH) were prepared by melt compounding. The crystallization, morphology and mechanical properties of the composites were investigated by means of differential scanning calorimetry, wide‐angle X‐ray diffraction, polarized light microscopy, scanning electron microscopy and mechanical tests. It is found that both T‐CaCO₃ and NT‐C are able to induce the formation of β‐phase, and NT‐C greatly increases the β content and decreases the spherulitic size of PP. PP‐g‐MAH facilitates the formation of β‐form PP and improves the compatibility between T‐CaCO₃ and PP. Izod notched impact strength of β‐PP/T‐CaCO₃ composite is higher than that of PP/T‐CaCO₃ composite, indicating the synergistic toughening effect of T‐CaCO₃ and β‐PP. Incorporation of PP‐g‐MAH into β‐PP/T‐CaCO₃ composite further increases the content of β‐crystal PP and improves the impact strength and tensile strength when T‐CaCO₃ concentration is below 5 wt%. The nonisothermal crystallization kinetics of β‐PP composites is well described by Jeziorny's and Mo's methods. It is found that NT‐C and T‐CaCO₃ accelerate the crystallization rate of PP but the influence of PP‐g‐MAH on crystallization rate of β‐PP composite is marginal. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Palladium(II)‐Catalyzed 1,4‐Addition of Arylboronic Acids to β‐Arylenones for Enantioselective Synthesis of 4‐Aryl‐4H‐chromenes

The enantioselective 1,4‐addition of arylboronic acids to β‐arylenones to give β‐diaryl ketones was carried out at 0–25 °C in the presence of a dicationic palladium(II) catalyst, [Pd(S,S‐chiraphos)(PhCN)₂](SbF₆)₂. Addition of a silver salt such as silver tetrafluoroborate [AgBF₄] or silver hexafluoroantimonate [AgSbF₆] (5–10 mol %) was effective to achieve high enantioselectivities at low temperatures (92–99 % ee) and to reduce the catalyst loading to 0.05 mol %. The protocol provided a simple access to 4‐aryl‐4H‐chromenes. Optically active chromenes were synthesized with up to 99 % ee via dehydration of the 1,4‐adducts between arylboronic acids and β‐(2‐hydroxyaryl)‐α,β‐unsaturated ketones.     

Negative effect of stretching on the development of β‐phase in β‐nucleated isotactic polypropylene

On the premise that shear in the slit die of an extruder was minimized as far as possible, β‐nucleated isotactic polypropylene (iPP) was extruded. Simultaneously, once the extrudate (in the melt state) left the die exit, it was stretched at various stretching rates (SRs). For iPP with a low content of β‐nucleating agent (β‐NA), the crystallinity of β‐phase (X_β) initially increases with increasing SR, and then decreases slightly with further increase in SR. However, for iPP containing a higher content of β‐NA, with increasing SR, X_β decreases monotonically, indicating a negative effect of SR on β‐phase formation. Small‐angle X‐ray scattering and polarized optical microscopy experiments reveal that, when SR is less than 30 cm min^?1, the increasing amount of row nuclei induced by increasing SR is mainly responsible for the increase of X_β. In contrast, when SR exceeds 30 cm min^?1, the overgrowth of shish structures unexpectedly restrains the development of β‐phase, and spatial confinement is considered as a better explanation for the suppression of β‐phase. Copyright © 2011 Society of Chemical Industry     

Synthesis of a novel linear water‐soluble β‐cyclodextrin polymer

A novel linear water‐soluble β‐cyclodextrin polymer has been prepared by grafting β‐cyclodextrin on poly[(methyl vinyl ether)‐alt‐(maleic anhydride)]. First, lithium hydride was used to obtain the mono‐alkoxide β‐CD. Grafting of β‐CD derivatives to the polymer backbone was then carried out by an esterification method. Using this method, polymers containing various amounts of β‐CD were synthesized. The resulting grafted polymers were characterized by two complementary methods, ¹H NMR and IR spectroscopy. The first was used to calculate the degree of substitution for the low amounts of β‐CD. The second method was very useful to evaluate the degree of substitution and the molar ratio of CD especially for high amounts of grafting. Our results indicate good agreement between both methods for intermediate rates. Copyright © 2004 Society of Chemical Industry     

N,N′‐Dioxide‐Magnesium Ditriflate Complex‐Catalyzed Asymmetric α‐Hydroxylation of β‐Keto Esters and β‐Keto Amides

The highly catalytic asymmetric α‐hydroxylation of 1‐tetralone‐derived β‐keto esters and β‐keto amides using tert‐butyl hydroperoxide (TBHP) as the oxidant was realized by a chiral N,N′‐dioxide‐magnesium ditriflate [Mg(OTf)₂] complex. A series of corresponding chiral α‐hydroxy dicarbonyl compounds was obtained in excellent yields (up to 99%) with excellent enantioselectivities (up to 98% ee). The products were easily transformed into useful building blocks and the precursor of daunomycin was achieved in an asymmetric catalytic way for the first time.     

Enzymes in Organic Chemistry, 11:[1] Hydrolase‐Catalyzed Resolution of α‐ and β‐Hydroxyphosphonates and Synthesis of Chiral,Non‐Racemic β‐Aminophosphonic Acids

The enantioselective acylation of racemic diisopropyl α‐ and β‐hydroxyphosphonates by hydrolases in t‐butyl methyl ether with isopropenyl acetate as acyl donor is limited by the narrow substrate specificity of the enzymes. High enantiomeric excesses (up to 99%) were obtained for the acetates of (S)‐diisopropyl 1‐hydroxy‐(2‐thienyl)methyl‐, 1‐hydroxyethyl‐ and 1‐hydroxyhexylphosphonate and (R)‐diisopropyl 2‐hydroxypropylphosphonate. The hydrolysis of a variety of β‐chloroacetoxyphosphonates by the lipase from Candida cylindracea and protease subtilisin in a biphasic system gives (S)‐β‐hydroxyphosphonates (ee 51–92%) enantioselectively. (S)‐2‐Phenyl‐2‐hydroxyethyl‐ and (S)‐3‐methyl‐2‐hydroxybutylphosphonates (ee 96% and 99%, respectively) were transformed into (R)‐2‐aminophosphonic acids of the same ee.     

Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing

Scaffolds of polycaprolactone (PCL) and PCL composites reinforced with β‐tricalcium phosphate (β‐TCP) were manufactured aiming potential tissue engineering applications. They were fabricated using a three‐dimensional (3D) mini‐screw extrusion printing, a novel additive manufacturing process, which consists in an extrusion head coupled to a 3D printer based on the Fab@Home equipment. Thermal properties were obtained by differential scanning calorimetry and thermogravimetric analyses. Scaffolds morphology were observed using scanning electron microscopy and computed microtomography; also, reinforcement presence was observed by X‐ray diffraction and the polymer chemical structure by Fourier transform infrared spectroscopy. Mechanical properties under compression were obtained by using a universal testing machine and hydrophilic properties were studied by measuring the contact angle of water drops. Finally, scaffolds with 55% of porosity and a pore size of 450 μm have shown promising mechanical properties; the β‐TCP reinforcement improved mechanical and hydrophilic behavior in comparison with PCL scaffolds. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43031.     

Enzymatic Synthesis of Enantiopure α‐ and β‐Amino Acids by Phenylalanine Aminomutase‐Catalysed Amination of Cinnamic Acid Derivatives

The phenylalanine aminomutase (PAM) from Taxus chinensis catalyses the conversion of α‐phenylalanine to β‐phenylalanine, an important step in the biosynthesis of the N‐benzoyl phenylisoserinoyl side‐chain of the anticancer drug taxol. Mechanistic studies on PAM have suggested that (E)‐cinnamic acid is an intermediate in the mutase reaction and that it can be released from the enzyme's active site. Here we describe a novel synthetic strategy that is based on the finding that ring‐substituted (E)‐cinnamic acids can serve as a substrate in PAM‐catalysed ammonia addition reactions for the biocatalytic production of several important β‐amino acids. The enzyme has a broad substrate range and a high enantioselectivity with cinnamic acid derivatives; this allows the synthesis of several non‐natural aromatic α‐ and β‐amino acids in excellent enantiomeric excess (ee >99 %). The internal 5‐methylene‐3,5‐dihydroimidazol‐4‐one (MIO) cofactor is essential for the PAM‐catalysed amination reactions. The regioselectivity of amination reactions was influenced by the nature of the ring substituent.     

Synthesis of an Enantiocomplementary Catalyst of β‐Isocupreidine (β‐ICD) from Quinine

Compound 20 , a pseudoenantiomer of β‐isocupreidine (β‐ICD), was synthesized from quinine employing a Barton reaction of nitrosyl ester 13 and acid‐catalyzed cyclization of carbinol 18 as key steps. The Baylis–Hillman reaction of benzaldehyde, p‐nitrobenzaldehyde, and hydrocinnamaldehyde with 1,1,1,3,3,3‐hexafluoroisopropyl acrylate (HFIPA) using 20 as a chiral amine catalyst was found to give the corresponding S‐enriched adducts in high optical purity (>91% ee) in contrast to the β‐ICD‐catalyzed reaction which affords R‐enriched adducts. This result suggests that compound 20 can serve as an enantiocomplementary catalyst of β‐ICD in the asymmetric Baylis–Hillman reaction of aldehydes with HFIPA.     

A highly active and selective β‐nucleating agent for isotactic polypropylene and crystallization behavior of β‐nucleated isotactic polypropylene under rapid cooling

Zinc adipate (Adi‐Zn) was observed to be a highly active and selective β‐nucleating agent for isotactic polypropylene (iPP). The effects of Adi‐Zn on the mechanical properties and the β‐crystals content of nucleated iPP were investigated. The impact strength of iPP nucleated with 0.2 wt % Adi‐Zn was 1.8 times higher than that of neat iPP. In addition, wide‐angle X‐ray diffraction analysis indicated that the content of β‐crystals in nucleated iPP (k_β value) reached 0.973 with 0.1 wt % Adi‐Zn, indicating that Adi‐Zn is a highly active and selective β‐nucleating agent for iPP. Furthermore, fast scanning chip calorimetry (FSC) studies using cooling rates from 60 to 13,800 °C min^?1 revealed that the formation of β‐crystals significantly depended on the cooling rates. At cooling rates below 3000 °C min^?1, only β‐crystals existed. However, at cooling rates above 6000 °C min^?1, β‐crystals failed to form. Moreover, a lower critical crystallization temperature that corresponded to the generation of β‐crystals was investigated using cooling‐induced crystallization, and the results are in good agreement with those of a previous study. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43767.     

A Thioether‐Stabilized d‐Proline–l‐Proline‐Induced β‐Hairpin Peptide of Defensin Segment Increases Its Anti‐Candida albicans Ability

We report a β‐hairpin dual stabilizing strategy: a d ‐proline‐l ‐proline (d ‐Pro‐l ‐Pro) dipeptide as the nucleating turn, and a thioether tether as a side‐chain linkage at a precisely designed position to stabilize the β‐hairpin. This method was used to modify the C‐terminal β‐hairpin moiety of the plant defensin, pv‐defensin, in order to obtain a stabilized peptide with enhanced anti‐Candida albicans activity (MIC 84–3.0 μm ), high serum stability (50 % remaining after 48 h) and low hemolysis (<10 % at 152 μm ). This modified peptide penetrated the C. albicans cell membrane within 5 min and showed high activity against clinically isolated antibiotic‐resistant C. albicans and Candida glabrata strains.     

Preparation of 2H‐1,4‐Benzoxazin‐2‐one Derivatives under Heterogeneous Conditions via Domino Process

Carbonate on polymer is a valuable solid supported reagent (SSR) to promote, under eco‐friendly conditions, the preparation of 2H‐1,4‐benzoxazin‐2‐one derivatives starting from β‐nitroacrylates and aminophenols via a domino process.     

Adsorption and drug release based on β‐cyclodextrin‐grafted hydroxyapatite composite

In this study, β‐cyclodextrin (β‐CD) was covalently grafted on hydroxyapatite (HA) using a coupling agent to improve the drug loading capacity and prolong the drug release. The binding of β‐CD on the HA surface was confirmed by Fourier transformation infrared spectroscopy, thermal gravimetric analysis, and X‐ray powder diffraction. The adsorption capacity of ofloxacin on β‐CD‐grafted hydroxyapatite (β‐CD‐g‐HA) composite was found to be 30 mg g^?1 at 37°C and 24 h. The adsorption process is spontaneous, given the negative values of free energy change. Compared with the release of ofloxacin loaded on HA, the release of ofloxacin loaded on β‐CD‐g‐HA was slowed down 28% and 21% in pH 2.0 and pH 7.4 buffer media at 2 h, respectively. Biocompatibility of β‐CD‐g‐HA was assessed by MTT assay, and the result showed that it had no cytotoxicity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013