Preparation and swelling properties of semi‐IPN hydrogels based on chitosan‐g‐poly(acrylic acid) and phosphorylated polyvinyl alcohol

The phosphorylated poly(vinyl alcohol) (P‐PVA) samples with various substitution degrees were prepared through the esterification reaction of PVA and phosphoric acid. By using chitosan (CTS), acrylic acid (AA) and P‐PVA as raw materials, ammonium persulphate (APS) as an initiator and N,N‐methylenebisacrylamide as a crosslinker, the CTS‐g‐PAA/P‐PVA semi‐interpenetrated polymer network (IPN) ssuperabsorbent hydrogel was prepared in aqueous solution by the graft copolymerization of CTS and AA and followed by an interpenetrating and crosslinking of P‐PVA chains. The hydrogel was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) techniques, and the influence of reaction variables, such as the substitution degree and content of P‐PVA on water absorbency were also investigated. FTIR and DSC results confirmed that PAA had been grafted onto CTS backbone and revealed the existence of phase separation and the formation of semi‐IPN network structure. SEM observations indicate that the incorporation of P‐PVA induced highly porous structure, and P‐PVA was uniformly dispersed in the polymeric network. Swelling results showed that CTS‐g‐PAA/P‐PVA semi‐IPN superabsorbent hydrogel exhibited improved swelling capability (421 g·g^?1 in distilled water and 55 g·g^?1 in 0.9 wt % NaCl solution) and swelling rate compared with CTS‐g‐PAA/PVA hydrogel (301 g·g^?1 in distilled water and 47 g·g^?1 in 0.9 wt % NaCl solution) due to the phosphorylation of PVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

In vitro silver ion release kinetics from nanosilver/poly(vinyl alcohol) hydrogels synthesized by gamma irradiation

A nanosilver (nano‐Ag)/poly(vinyl alcohol) (PVA) hydrogel device was synthesized with γ irradiation because it is a highly suitable tool for enhanced nano‐Ag technologies and biocompatible controlled release formulations. The amount of the Ag⁺ ions released in vitro by the nano‐Ag/PVA hydrogel device was in the antimicrobial parts per million concentration range. The modeling of the Ag⁺ ion release kinetics with the elements of the drug‐delivery paradigm revealed the best fit solution (R² > 0.99) for the Kopcha and Makoid–Banakar's pharmacokinetic dissolution models. The term A/B, derived from the Kopcha model, indicated that the nano‐Ag/PVA hydrogel was mainly an Ag⁺‐ion diffusion‐controlled device. Makoid–Banakar's parameter and the short time approximated Ag⁺‐ion diffusion constant reflected the importance of the size of the Ag nanoparticles. However, it appeared that the cell oxidation potential of the Ag nanoparticles depended on the diffusion characteristics of the fluid penetrating into the Ag/PVA nanosystem. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40321.     

Formation of the first injectable poly(vinyl alcohol) hydrogel by mixing of functional PVA precursors

In this study we describe the development of an injectable, in situ chemical hydrogel forming system. The gelation occurs under neutral pH and at room temperature immediately upon mixing of the two aqueous poly (vinyl alcohol) components specifically derivatized through carbamate linkages with aldehyde (PVA‐AL) and hydrazide (PVA‐HY) functional groups, respectively. Aldehyde and hydrazide pendant groups were incorporated with a low degree of substitution (DS) into the PVA backbone to keep PVA structural homogeneity minimally altered. As a result, the hydrazone crosslinks are formed rapidly between aldehyde and hydrazide pendant groups when the correspondingly modified PVA components are brought in contact as water solutions. To assess in situ hydrazone crosslinks formation for in vitro cytocompatibility, murine neuroblastoma N2a cells were suspended in cell culture medium with the dissolved PVA‐HY prior to addition to the PVA‐AL aqueous solution. Thus, the cells were chemically encapsulated in a polymer network that was formed by mixing of the corresponding aqueous solutions of PVA functional precursors. Biochemical analysis revealed that cells survived chemical crosslinking and remained viable in the hydrogel for 4 days of culture. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Electroactive characteristics of interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

An interpenetrating polymer network (IPN) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by the sequential IPN method. The equilibrium swelling ratio and bending behavior under electric fields of the IPN hydrogel were measured in an aqueous NaCl solution. The IPN exhibited a high equilibrium swelling ratio, in the range 280–380%. When the IPN in aqueous NaCl solution was subjected to an electric field, the IPN showed significant and quick bending toward the cathode. The IPN hydrogel also showed stepwise bending behavior, depending on the electric stimulus. In addition, the ionic conductivity of the IPN hydrogel was measured using dielectric analysis, and its conductive behavior followed the Arrhenius equation. The conductivity of the IPN hydrogel and the activation energy for the form of the IPN were 1.68 × 10^?5 S/cm at 36°C and 61.0 kJ/mol, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 890–894, 2003     

Preparation and characterization of nanostructured and high transparent hydrogel films with pH sensitivity and application

Novel nanostructured, high transparent, and pH sensitive poly(2‐hydroxyethyl methacrylate‐co‐methacryliac acid)/poly(vinyl alcohol) (P(HEMA‐co‐MA)/PVA) interpenetrating polymer network (IPN) hydrogel films were prepared by precipitation copolymerization of aqueous phase and sequential IPN technology. The first P(HEMA‐co‐MA) network was synthesized in aqueous solution of PVA, then followed by aldol condensation reaction, it formed multiple IPN nanostructured hydrogel film. The film samples were characterized by IR, SEM, DSC, and UV‐vis spectrum. The transmittance arrived at 93%. Swelling and deswelling behaviors showed the multiple IPN nanostuctured film had rapid response. The mechanical properties of all the IPN films improved than that of PVA film. Using crystal violet as a model drug, the release behaviors of the films were studied. The results showed that compared with PVA, which had low drug loading and exhibited high and burst release, the three IPN films had high drug loading and exhibited sustained release. Besides, the release followed different release mechanism at pH = 4.0 and pH = 7.4, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Modification of non‐Newtonian flow behavior of aqueous solution of poly(vinyl alcohol) by conducting polypyrrole prepared by in situ polymerization of pyrrole

The rheological behavior of an aqueous solution of poly(vinyl alcohol) (PVA) and polypyrrole (PPY) dispersions prepared by ferric chloride (FeCl₃)‐catalyzed polymerization of pyrrole was investigated at 12°C using a coaxial rotational viscometer. The results show that the addition of a low dose of FeCl₃ to the PVA solution greatly influences its rheology. The prominent shear‐thickening (dilatant) nature of PVA turns significantly pseudoplastic (shear thinning) in the presence of FeCl₃. Polypyrrole‐loaded PVA was obtained in a stable, optically clear dispersion by in situ polymerization of pyrrole in an aqueous PVA solution (5%) using FeCl₃ as the oxidative catalyst at 12°C. The PPY dispersions in aqueous PVA systems having a low loading of PPY and low Fe⁺³ content retain the dilatant character of an aqueous PVA solution; however, for an aqueous PVA system having a relatively high PPY loading and also a high Fe⁺³ content, prominent pseudoplastic (shear thinning) behavior is exhibited. The odd novel rheological patterns exhibited by a PVA solution in the absence and presence of FeCl₃ and the PVA–PPY dispersions containing FeCl₃ under different sets of conditions are explained on the basis of the complexation of PVA by Fe⁺³ and related ions and also as a consequence of some degree of H‐bonding and chemical grafting between the support polymer PVA and the PPY formed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3737–3741, 2004     

Preparation and characterization of polyacrylic acid‐poly(vinyl alcohol)‐based interpenetrating hydrogels

Some structural features of hydrogels from poly(acrylic acid) (PAAc) of various crosslinking degrees have been investigated through mechanical and swelling measurements. Interpenetrating polymer hydrogels (IPHs) of poly(vinyl alcohol) (PVA) and PAAc have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N,N‐methylenebisacrylamide in the presence of PVA. The application of freeze–thaw (F–T) cycles leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and viscoelastic properties of the IPHs were evaluated as a function of the content of crosslinker and the application of one F–T cycle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5789–5794, 2006     

Multilayer‐coated NPK compound fertilizer hydrogel with controlled nutrient release and water absorbency

A novel trilayered controlled‐release nitrogen, phosphorous, and potassium (NPK) fertilizer hydrogel was prepared by dipping the NPK fertilizer granules sequentially in 7% w v^?1 poly(vinyl alcohol) (PVA) and 2% w v^?1 chitosan (CS) solutions and then cross‐linking the CS layer (cross‐CS) via glutaraldehyde vapor deposition. Different NPK fertilizer hydrogels were then synthesized by inverse suspension polymerization of the dried PVA/cross‐CS bilayer‐coated fertilizer granules in various molar ratios of acrylamide (AM) and acrylic acid (AA) monomers, and polymerization with varying molar ratios of ammonium persulfate, N,N,N′,N′‐tetramethylethylenediamine and N,N′‐methylenebisacrylamide (N‐MBA). The water dissolution time of the obtained PVA/cross‐CS/poly (AA‐co‐AM) trilayer‐coated NPK fertilizer hydrogel granules was prolonged, while the water absorbency increased with increasing AA contents, and decreased with increasing N‐MBA contents in the outer poly(AA‐co‐AM) coating. The optimal trilayer‐coated NPK fertilizer hydrogel obtained released 84 ± 18, 63 ± 12, and 36 ± 15% of the N, P, and K nutrients, respectively, after a 30‐day immersion in water. The release phenomena of the N, P, and K nutrients of the fertilizer hydrogel obeyed both the Korsmeyer‐Peppas and Ritger‐Peppas models with a pseudo‐Fickian diffusion mechanism. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41249.     

Development of a nonaqueous solvent system for poly(vinyl alcohol) and its characterization

Solubility of poly(vinyl alcohol) (PVA) in water prevents the preparation of various derivatives through homogeneous techniques as most of the derivatives thus formed are insoluble in aqueous medium. There are a number of solvents that can swell PVA under hot conditions but cannot dissolve PVA. In the present study, N,N‐dimethyl acetamide (DMAc) has been identified as solvent in which PVA can be dissolved in the presence of an equimolar amount of lithium chloride (LiCl). ¹H nuclear magnetic resonance (¹H‐NMR), ¹³C‐NMR, infrared (IR), and X‐ray diffraction (XRD) studies have been carried out to characterize the regenerated poly(vinyl alcohol) (RPVA). DMAc–LiCl is found to be a true solvent system for dissolution of PVA. An attempt has also been made to prepare poly(vinyl acetate) from this solution of PVA by a homogeneous technique. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 663–669, 1999     

Synthesis and characterization of temperature‐responsive poly(vinyl alcohol)‐based copolymers

A poly(vinyl alcohol) (PVA)/sodium acrylate (AANa) copolymer was synthesized to improve the water solubility of PVA at the ambient temperature. Furthermore, a series of temperature‐responsive acetalyzed poly(vinyl alcohol) (APVA)‐co‐AANa samples of various chain lengths, degrees of acetalysis (DAs), and comonomer contents were prepared via an acid‐catalysis process. Fourier transform infrared and ¹H‐NMR techniques were used to analyze the compositions of the copolymers. The measurement of the turbidity change for APVA‐co‐AANa aqueous solutions at different temperatures revealed that the lower critical solution temperature (LCST) of the copolymers could be tailored through the control of the molecular weight of the starting PVA‐co‐AANa, DA, and comonomer ratios. Lower LCSTs were observed for APVA‐co‐AANa with a longer chain length, a higher DA, and fewer acrylic acid segments. In addition, the LCSTs of the APVA‐co‐AANa aqueous solutions appeared to be salt‐sensitive. The LCSTs decreased as the concentration of NaCl increased. Moreover, atomic force microscopy images of APVA‐co‐AANa around the LCST also proved the temperature sensitivity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of poly(ϵ‐caprolactone‐co‐p‐dioxanone)–poly(ethylene glycol)–poly(ϵ‐caprolactone‐co‐p‐dioxanone)/bioactive inorganic particle nanocomposites

With an aim to develop injectable hydrogel with improved solution stability and enhanced bone repair function, thermogelling poly(ε‐caprolactone‐co‐p‐dioxanone)‐poly(ethylene glycol)‐poly(ε‐caprolactone–co‐p‐dioxanone) (PECP)/bioactive inorganic particle nanocomposites were successfully prepared by blending the triblock copolymer (PECP) with nano‐hydroxyapatite (n‐HA) or nano‐calcium carbonate (n‐CaCO₃). The hydrogel nanocomposites underwent clear sol–gel transitions with increasing temperature from 0 to 50°C. The obtained hydrogel nanocomposites were investigated by ¹H NMR, FT‐IR, TEM, and DSC. It was found that the incorporation of inorganic nanoparticles into PECP matrix would lead to the critical gelation temperature (CGT) shifting to lower values compared with the pure PECP hydrogel. The CGT of the hydrogel nanocomposites could be effectively controlled by adjusting PECP concentration or the content of inorganic nanoparticles. The SEM results showed that the interconnected porous structures of hydrogel nanocomposites were potentially useful as injectable scaffolds. In addition, due to the relatively low crystallinity of PECP triblock copolymer, the aqueous solutions of the nanocomposites could be stored at low temperature (5°C) without crystallization for several days, which would facilitate the practical applications. The PECP/bioactive inorganic particle hydrogel nanocomposites are expected to be promising injectable tissue engineering materials for bone repair applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Enhancement of the transport and dielectric properties of graphite oxide nanoplatelets‐polyvinyl alcohol composite showing low percolation threshold

Graphite oxide nanoplatelets (GOnP) were prepared using standard method and used to make GOnP‐polyvinyl alcohol (PVA) composites by using solution cast technique. Significant enhancement of electrical conductivity and dielectric permittivity of the GOnP/PVA composites are observed at low GOnP concentration (f_GOnP = f_c∼0.41 vol%) which is the percolation threshold value estimated from the concentration dependent transport and dielectric data. Nearly 300 times increase in dielectric permittivity (compared with that of PVA) is observed in the GOnP/PVA composite around f_c. We notice interesting metal‐insulator like transition (a sudden increase in resistivity) from the temperature dependent resistivity data in the pure GOnP sample around T_MI ∼ 275 K which is shifted to 300 K in the GOnP/PVA composite for f_c = 0.41 vol%, indicating drastic change of sp³/sp² ratio around respective T_MI. The present graphite‐based composite material might be processed for different applications. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Superabsorbent composite. XIII. Effects of Al3+‐attapulgite on hydrogel strength and swelling behaviors of poly(acrylic acid)/Al3+‐attapulgite superabsorbent composites

Al³⁺‐attapulgite (Al³⁺‐APT) was prepared by treating attapulgite (APT) with AlCl₃ aqueous solution of various concentrations. The poly(acrylic acid)/Al³⁺‐attapulgite (PAA/Al³⁺‐APT) superabsorbent composite was prepared by reaction of partly neutralized acrylic acid, and Al³⁺‐APT in aqueous solution using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The surface morphology of the composite was investigated by SEM, and the Al³⁺‐APT composite generated a relatively planar surface comparing the nature APT. The effects of Al³⁺‐APT on hydrogel strength and swelling behaviors, such as equilibrium water absorbency, swelling rate, and reswelling capability, of the superabsorbent composites were also studied. The hydrogel strength and reswelling capability were improved, however, the equilibrium water absorbency and swelling rate decreased with increasing AlCl₃ solution concentration. The equilibrium water absorbency firstly increased, and then decreased with increasing Al³⁺‐APT content. The results indicate that Al³⁺‐APT acts as an assistant crosslinker in the polymeric network, which has great influences on hydrogel strength and swelling behaviors of the PAA/Al³⁺‐APT superabsorbent composites. POLYM. ENG. SCI., 47:619–624, 2007. © 2007 Society of Plastics Engineers.     

Electric stimuli responses to poly(vinyl alcohol)/chitosan interpenetrating polymer network hydrogel in NaCl solutions

An interpenetrating polymer network (IPN) hydrogel composed of poly(vinyl alcohol) (PVA) and chitosan exhibited electric‐sensitive behavior. The PVA/chitosan IPN hydrogel was synthesized by an ultraviolet (UV) irradiation method that is used in several biomedical and industrial fields. The swelling behavior of the PVA/chitosan IPN hydrogel was studied by immersion of the gel in NaCl aqueous solutions at various concentrations. The swelling ratio decreased with increasing concentration of NaCl solution. The stimuli response of the IPN hydrogel in electric fields was also investigated. When a swollen PVA/chitosan IPN was placed between a pair of electrodes, the IPN exhibited bending behavior in response to the applied electric field. The bending angle and the bending speed of the PVA/chitosan IPN increased with increasing applied voltage and concentration of NaCl aqueous solution. The PVA/chitosan IPN also showed stepwise bending behavior depending on the electric stimulus. In addition, thermal properties of PVA/chitosan IPN were investigated by differential scanning calorimetry (DSC) and dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2285–2289, 2002     

Poly(vinyl alcohol)–Carbon Nanodots Fluorescent Hydrogel with Superior Mechanical Properties and Sensitive to Detection of Iron(III) Ions

A high‐strength fluorescent hydrogel is prepared by physical cross‐linking of carbon nanodots (CNDs) with poly(vinyl alcohol) (PVA). The stretching and compression of the PVA hydrogel are improved with CNDs by 176% and 64%, respectively. It still has excellent self‐healing behaviors without adding other healing agents. In addition, the search for rapid detection of heavy metals is still a huge challenge. The resulting hydrogel exhibits fluorescence quenching in the presence of Fe³⁺ by the fluorescence characteristics of CNDs, which has high selectivity and sensitivity. The PVA‐CNDs fluorescent hydrogel can be used as a solid detection platform for Fe³⁺, where the detection limit is found to be 10 µm for Fe³⁺ by fluorescence studies.     

Effect of stereoregularity and molecular weight on the mechanical properties of poly(vinyl alcohol) hydrogel

The effect of the stereoregularity and molecular weight of poly(vinyl alcohol) (PVA) on the mechanical properties of hydrogel was investigated. Compressive strength, creep behavior, and dynamic viscoelasticity were measured on hydrogels of syndiotacticity‐rich PVA derived from poly(vinyl pivalate) (D_p = 1690 diad‐syndiotacticity = 61%, D_p = 8020 diad‐syndiotacticity = 62%) and atactic PVA (D_p = 1750 diad‐syndiotacticity = 54%, D_p = 7780 diad‐syndiotacticity = 54%). Increasing the molecular weight of molecular chains constituting the gel improved the compressive strength of atactic PVA hydrogel. The stereoregularity of PVA had a greater effect than molecular weight on the strength of the hydrogel. Gel prepared from 8.8 g/dL syndiotacticity‐rich PVA had a high compressive modulus of 10 kPa, and the compressive modulus of the gel prepared from 3.3 g/dL was comparable with that of atactic PVA hydrogel prepared with more than 6 g/dL. The dynamic storage modulus of the gel derived from syndiotacticity‐rich PVA was remarkably higher than that of the atactic PVA gel and remained constant up to 60°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Silver Nanoparticles Loaded Thermoresponsive Hybrid Nanofibrous Hydrogel as a Recyclable Dip‐Catalyst with Temperature‐Tunable Catalytic Activity

Silver nanoparticles (AgNPs) loaded thermoresponsive nanofibrous hydrogel is fabricated by electrospinning the aqueous solution containing the metal nanoparticles and poly((N‐isopropylacrylamide)‐co‐(N‐hydroxymethylacrylamide)) copolymer, followed by heat treatment. To avoid negative effect of the stabilizer or the residual reductant on their performances, the AgNPs of less than 5 nm size are synthesized through reducing Ag⁺ ions in the spinning solution by UV irradiation. The prepared nanofibrous hydrogel with desirable stability in aqueous medium has significant thermoresponsive property, and can reach its swelling or deswelling equilibrium state within 15 s with the medium temperature changing between 25 and 50 °C alternately. The smart nanofibrous hydrogel as a dip‐catalyst has the catalysis for the reduction of 4‐nitrothiophenol to 4‐aminothiophenol by NaBH₄, and its catalytic activity can be rapidly tuned by temperature. Moreover, it can be facilely recycled from the reaction system at least four times, without any loss of its catalytic activity.     

Preparation of monodisperse poly(vinyl alcohol) microspheres by heterogeneous surface saponification and iodine complex formation

Monodisperse poly(vinyl acetate) (PVAc) microspheres with high molecular weight obtained by suspension polymerization of vinyl acetate were saponified in alkaline aqueous solution to keep their spherical structure. The saponification was restricted on the surface of the PVAc microspheres and obtained particles had skin/core structure. Various poly(vinyl alcohol) (PVA) microspheres with different diameters and degrees of saponification (DSs) were obtained. The conversion of PVAc to PVA during the heterogeneous surface saponification time were examined by nuclear magnetic resonance spectroscopy and after 72 h hydrogel type PVA microspheres completely saponified were obtained. The crystal melting temperatures of the microspheres obtained by the saponification were measured a constant value of 238°C irrespective of varying DS, and the peaks became enlarged as reaction time. Iodine complexes were formed in saponified microspheres with DS of 41% and 99% by immersing them in I₂/KI aqueous solution and decomposed by the reduction of I₂ in the complexes to 2I^? using sodium sulfite to confirm whether the skin formed through the saponification was composed of PVA with high VA content. Obviously, characteristic blue color developments owing to I₅^?‐PVA complexes were observed in both saponified regions and a red in the PVAc core. Consequently, it was concluded that the PVA skins formed by heterogeneous surface saponification had high DSs. Such complexes endowed polymeric microspheres a good radiopacity which would be useful in clinical treatment of vascular diseases and were examined by X‐ray irradiation image. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

PVA/PAA thermo‐induced hydrogel fiber: Preparation and pH‐sensitive behavior in electrolyte solution

The preparation of thermo‐induced hydrogel fibers composed of poly(vinyl alcohol) and poly(acrylic acid) is presented. The hydrogel fiber was prepared by extruding the spinning dope from in situ polymerization of acrylic acid in the presence of PVA into a coagulating bath of saturated ammonium sulfate aqueous solution. The network was formed by thermally heating the dried fibers under vacuum. The final hydrogel fibers exhibit pH‐sensitive behavior and show a hysteresis loop in the pH range from 3.0 to 12.0. The pH value, at which the swelling elongation ratio of the fiber had a jump, shifted to a lower value with increasing PAA content within the network. Increasing the heating temperature and time for the fibers, decreased the swelling elongation ratio, and the jump point pH shifted to higher pH value. The oscillatory swelling/contracting behavior of the hydrogel fiber exhibited a good reversible pH‐responsive property. Transmission Electron Microscopy (TEM) showed that PVA and PAA have good compatibility and give a relative independent interpenetrating network. Scanning Electron Microscopy (SEM) showed that in the surface of the fibers there were microholes and ditches due to some diffusion of PAA into the coagulating solution. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2423–2430, 2002     

Preparation of composites of liquid‐crystalline matrix of poly(p‐phenylene‐sulfoterephthalamide) and CaCO3 by In situ mineralization

Liquid‐crystalline (LC) hydrogels were obtained from an aqueous solution of poly(p‐phenylene‐sulfoterephthalamide) (PPST) by the addition of calcium ions (Ca²⁺). The critical hydrogel formation ratio of Ca²⁺ to the sulfonic acid group in PPST (^crtR_Ca = [Ca²⁺]/[ ]) depended on the concentration of PPST, and was independent of the molecular weight of PPST. When the LC hydrogel was prepared at a concentration of 0.5 wt % and ^crtR_Ca = 0.6, and was exposed to ammonium carbonate vapor for 96 h, all Ca²⁺ in the LC hydrogel were converted into calcite crystals. The alternate soaking process for the LC hydrogel induced the formation of two mesocrystal morphologies on and in the Ca²⁺ cross‐linked LC hydrogel. Plate‐like calcite mesocrystals grew at the hydrogel/solution interface and cubic mesocrystals were present in the inner space of the hydrogel, thus composites with some ordered structures of LC matrix and CaCO₃ have been prepared through in situ mineralization. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41455.