The improvement of electro‐optical properties of polymer‐dispersed liquid crystals with graft copolymer matrix synthesized by reversible addition–fragmentation chain transfer and atom transfer radical polymerization

Aiming to decrease the memory effect of polymer‐dispersed liquid crystals (PDLCs), a type of graft macroinitiator, synthesized by reversible addition–fragmentation chain transfer and atom transfer radical polymerization, was employed to prepare PDLCs with graft copolymer matrix in our previous work. Compared with linear copolymer matrix PDLCs prepared using a linear macroinitiator, it was found that, although low‐memory‐effect PDLCs were obtained, the driving voltage and transmittance of the PDLCs were unfortunately sacrificed to some extent. Thus, it is necessary to improve the electro‐optical properties of PDLCs on the basis of the original research performed by us. In the work reported in this article, a kind of linear macroinitiator with high refractive index and another graft macroinitiator with flexible branched chains were employed to prepare PDLCs. The results showed that by using mixed macroinitiators, the electro‐optical properties of PDLCs could be improved, and a possible mechanism is proposed.     

Macro reversible addition–fragmentation chain transfer agent mixture as a means to enhance the electro‐optical performance of polymer‐dispersed liquid crystals

Macro reversible addition–fragmentation chain transfer (RAFT) agents, i.e. RAFT polystyrene (RAFT‐PS) and RAFT poly(n‐butyl acrylate) (RAFT‐PBA), were mixed. Polymer‐dispersed liquid crystals (PDLCs) were prepared using the mixture together with methyl acrylate and liquid crystal E7. The electro‐optical properties of the PDLCs obtained were investigated. The results showed that the advantages of the electro‐optical properties of RAFT‐PS‐ and RAFT‐PBA‐dependent PDLCs could be combined in RAFT agent mixture‐dependent PDLCs. Copyright © 2011 Society of Chemical Industry     

Synthesis of well‐defined polystyrene‐graft‐poly(methyl methacrylate)

A well‐defined graft copolymer, polystyrene‐graft‐poly(methyl methacrylate), was synthesized in two steps. In the first step, styrene and p‐vinyl benzene sulfonyl chloride were copolymerized via reversible addition–fragmentation chain transfer polymerization (RAFT) in benzene at 60 °C with 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as a chain transfer agent and 2,2′‐azobis(isobutyronitrile) as an initiator. In the second step, poly[styrene‐co‐p‐(vinyl benzene sulfonyl chloride)] was used as a macroinitiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in toluene at 80 °C with CuCl as a catalyst and 2,2′‐bipyridine as a ligand. With sulfonyl chloride groups as the initiating sites for the ATRP of MMA, high initiation efficiencies were obtained. Copyright © 2006 Society of Chemical Industry     

The effect of photoinitiator concentration and structures of RAFT macroinitiators on the memory effect of polymer dispersed liquid crystals

The article aimed to decrease the memory effect of polymer dispersed liquid crystals (PDLCs) films, reversible additional‐fragmental chain transfer (RAFT) polymerization was used to synthesize RAFT‐polystyrene (RAFT‐PS), which was a kind of RAFT macroinitiators and used to prepare PDLCs via photo polymerization induced phase separation (PIPS). Different RAFT agents were used to synthesize RAFT‐PS. The effect of photoinitiator concentration on the memory effect of these PDLCs was investigated, and the effect of structures of RAFT macroinitiators on the memory effect of the PDLCs was also discussed. The results showed that PDLC films with higher photoinitiator concentration and polymer matrix which had two rigid chains in two ends showed lower memory effect, which could be reduced from 10.9% to 2.5% in this experiment. POLYM. ENG. SCI., 55:8–13, 2015. © 2014 Society of Plastics Engineers     

End‐functional polymers,thiocarbonylthio group removal/transformation and reversible addition–fragmentation–chain transfer (RAFT) polymerization

This review focuses on processes for thiocarbonylthio group removal/transformation of polymers synthesized by radical polymerization with reversible addition‐fragmentation‐chain transfer (RAFT). A variety of processes have now been reported in this context. These include reactions with nucleophiles, radical‐induced reactions, thermolysis, electrocyclic reactions and ‘click’ processes. We also consider the use of RAFT‐synthesized polymers in the construction of block or graft copolymers, functional nanoparticles and biopolymer conjugates where transformation of the thiocarbonylthio group is an integral part of the process. This includes the use of RAFT‐synthesized polymers in other forms of radical polymerization such as atom transfer radical polymerization or nitroxide‐mediated polymerization, and the ‘switching’ of thiocarbonylthio groups to enable control over polymerization of a wider range of monomers in the RAFT process. With each process we provide information on the scope and, where known, indicate the mechanism, advantages and limitations. Copyright © 2011 Society of Chemical Industry     

Graft copolymerization of methyl methacrylate with an N‐substituted maleimide–liquid‐crystalline copolymer by atom transfer radical polymerization

The synthesis of novel copolymers consisting of a side‐group liquid‐crystalline backbone and poly (methyl methacrylate) grafts were realized by the use of atom transfer radical polymerization (ATRP). In the first stage, the bromine‐functional copolymers 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate and (2,5‐dioxo‐2,5‐dihydro‐1H‐pyrrole‐1‐yl)methyl 2‐bromopropanoate were synthesized by free‐radical polymerization. These copolymers were used as initiators in the ATRP of methyl methacrylate to yield graft copolymers. Both the macroinitiator and graft copolymers were characterized by ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. The ATRP graft copolymerization was supported by an increase in the molecular weight of the graft copolymers compared to that of the macroinitiator and also by their monomodal molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene using novel heterocycle‐containing chain transfer agents

BACKGROUND: Controlled/‘living’ radical polymerization is a new and robust method to synthesize polymers with predetermined molecular weight, narrow polydispersity and tailored architecture. Several methods have been developed but reversible addition‐fragmentation chain transfer (RAFT) has several advantages over the other methods. It has been reported that the effectiveness of RAFT agents depends strongly on the nature of the Z and R groups. RESULTS: Three new dithiocarbamates, namely (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrrole‐1‐carbodithioate (CTA‐A), (1‐phenyl ethyl)‐pyrazole‐1‐carbodithioate (CTA‐B) and (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrazole‐1‐carbodithioate (CTA‐C), were synthesized for studying the effect of the Z and R group of a chain transfer agent on the RAFT polymerization of styrene, initiated by 2,2′‐azobisisobutyronitrile. Well‐controlled molecular weight with narrow polydispersity (1.10–1.46) was achieved. The increase in molecular weight with conversion is linear and follows first‐order kinetics. CONCLUSION: The detailed kinetic results show that the structure of the activating (Z) group of dithiocarbamates has significant effects on the reactivity of dithiocarbamates towards the polymerization of styrene. In the homopolymerization of styrene it was found that, from the polydispersity index of polystyrenes obtained and the kinetic results, the pyrazole‐based dithiocarbamates (CTA‐B and CTA‐C) are very effective compared to the pyrrole‐based dithiocarbamate (CTA‐A). All the polymerizations show controlled living characters. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of block comb‐like copolymers P(A‐MPEO)‐block‐PSt

Amphiphilic block comb‐shaped copolymers, poly[poly(ethylene oxide) methyl ether acrylate]‐block‐polystyrene [P(A‐MPEO)‐block‐PSt] with PSt as a handle, were successfully synthesized via a macromonomer technique. The reaction of MPEO with acryloyl chloride yielded a macromonomer, A‐MPEO. The macroinitiator PSt capped with the dithiobenzoate group (PSt‐SC(S)Ph) was prepared by reversible addition–fragmentation transfer (RAFT) polymerization of styrene in the presence of benzyl dithiobenzoate, and used as macroinitiator in the controlled radical block copolymerization of A‐MPEO at room temperature under ⁶⁰Co irradiation. After the unreacted macromonomer A‐MPEO had been removed by washing with hot saturated saline water, block comb‐shaped copolymers were obtained. Their structure was characterized by ¹H NMR spectroscopy and gel permeation chromatography. The phase transition and self‐assembling behaviour were investigated by atomic force microscope and differential scanning calorimetry. Copyright © 2004 Society of Chemical Industry     

Versatile method via reversible addition‐fragmentation transfer polymerization for synthesis of poly styrene/ZnO–nanocomposite

Reversible addition‐fragmentation chain transfer (RAFT) polymerization enables the synthesis of controlled architectures for a wide‐variety of polymers with defined end and pendant functionalities using mild conditions. A simple synthetic route for the preparation of polystyrene (PS)/ZnO nanocomposite with well‐defined structure is demonstrated. ZnO nanoparticles were synthesized by homogeneous precipitation. To reduce the aggregation among ZnO nanoparticles, an effective surface modification method was proposed by grafting polystyrene onto the ZnO particles. The surface of ZnO nanoparticles was firstly treated with a 4‐cyano‐4‐[(4‐methoxyphenyl carbon thiol) solfanylvaleric acid] coupling RAFT agent in the presence of THF as a solvent at 65°C. A carboxylic group in raft agent attached to ZnO nanoparticles by the esterification reaction with the hydroxyl groups on the ZnO particle surface. Then, RAFT polymerization of styrene was subsequently conducted to graft PS onto the exterior surface of ZnO nanoparticles by new RAFT agent 4‐cyano‐4‐[(4‐methoxyphenyl carbon thiol) solfanylvaleric acid]. The obtained nanocomposite was characterized by Fourier transform infrared spectroscopy (FT‐IR), thermo gravimetric (TGA), transmission electron microscopy (TEM), and X‐ray powder diffraction (XRD). POLYM. ENG. SCI., 56:187–195, 2016. © 2015 Society of Plastics Engineers     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Poly(dimethylsiloxane‐b‐styrene) diblock copolymers prepared by reversible addition‐fragmentation chain transfer polymerization: Kinetic model

Well‐defined polydimethylsiloxane‐block‐polystyrene (PDMS‐b‐PS) diblock copolymers were prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization using a functional PDMS‐macro RAFT agent. The RAFT polymerization kinetics was simulated by a mathematical model for the RAFT polymerization in a batch reactor based on the method of moments. The model described molecular weight, monomer conversion, and polydispersity index as a function of polymerization time. Good agreements in the polymerization kinetics were achieved for fitting the kinetic profiles with the developed model. In addition, the model was used to predict the effects of initiator concentration, chain transfer agent concentration, and monomer concentration on the RAFT polymerization kinetics. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

RAFT‐mediated emulsion polymerization of chloroprene and impact of chain‐end structure on chloroprene rubbers

The reversible addition‐fragmentation chain transfer (RAFT) polymerization of chloroprene (CP) in an emulsion system using a dithiocarbamate‐type RAFT agent was studied. The controlled RAFT‐mediated emulsion polymerization was achieved by the appropriate combination of a RAFT agent and nonionic surfactant (polyoxyethylene phenyl ether) using a water‐soluble initiator (VA‐044) at 35 °C. An almost linear first‐order kinetic plot was observed until relatively high conversion (>80%) with molecular weights between 22,300 and 33,100 and relatively narrow molecular weight distributions (M_w/M_n ≦ 1.5) were achieved. The amount of the emulsifier used and the pH of the system were found to affect the controlled character, polymerization rate, and induction period, which are related to the size of the emulsion particles. Large‐scale RAFT‐mediated emulsion polymerization was also employed to afford industrially applicable poly(CP) (M_w > 25 × 10⁴, resulting product > 2300 g). The vulcanized CP rubber obtained from the RAFT‐synthesized poly(CP) exhibited better physical properties, particularly tensile modulus and compression set, which may be due to the presence of the reactive end groups and the absence of low‐molecular‐weight products. We also evaluated the impact of the chain‐end structure on the mechanical and physical properties of these industrially important CP rubbers with carbon black. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46008.     

Fabrication of a poly(N‐vinyl‐2‐pyrrolidone) modified macroporous polypropylene membrane via one‐pot reversible‐addition fragmentation chain‐transfer polymerization and click chemistry

In this study, a macroporous polypropylene membrane (MPPM) was grafted with hydrophilic poly(N‐vinyl‐2‐pyrrolidone) (PNVP) based on a one‐pot reversible‐addition fragmentation chain transfer (RAFT) polymerization and click chemistry. First, we prepared the clickable membrane by bromination and following S_N2 nucleophilic substitution reaction; then, click chemistry and RAFT polymerization were performed in one‐pot to graft PNVP to the MPPM surface. The surface characterizations, including attenuated total reflectance/Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and field‐emission scanning electron microscopy, illustrated that PNVP was really grafted onto the MPPM surface. The permeation and antifouling characteristics of the MPPMs were measured by the filtration of a bovine serum albumin dispersion; this showed that in contrast to the nascent membrane, the grafted membrane efficiently obstructed protein molecules because of the compactly grafted polymer chains. The hydrophilicity and antifouling properties of MPPM were greatly ameliorated after modification. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42649.     

Synthesis,properties, and self‐assembly of poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers

Poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers were successfully synthesized using a dendritic chloric poly(benzyl ether) (G₁‐Cl, G₂‐Cl, and G₃‐Cl) as the macroinitiator through the atom transfer radical polymerization process. The structure and properties of the resultant polymers were characterizated by gel permeation chromatography, ¹H‐NMR, Fourier transform IR, thermogravimetric analysis, and differential scanning calorimetry. It was found that the temperature, reaction time, molar ratio of the macroinitiator to styrene, and the generation number of the macroinitiator have significant effects on the molecular weights, conversion, and polydispersities of the resulting polymers. These dendritic–linear block polymers had very good solubility in common organic solvents at room temperature. The terminal group (dendritic segments) of the polymers can affect their thermal stability. These dendritic–linear polymers after self‐assembling in selective solvents (chloroform/acetone) formed core–shell micelles. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1106–1112, 2005     

Modeling analysis of chain transfer in reversible addition‐fragmentation chain transfer polymerization

The validity of simplifying the reversible addition‐fragmentation chain transfer (RAFT) polymerization as a degenerative chain transfer process was verified in this work. The simplified chain transfer mechanism enabled the direct modeling investigation of chain transfer coefficient in the RAFT polymerization. It also gave the analytical expressions for concentration, chain length, and polydispersity of various chain species. The comparison between the simulations based on chain transfer mechanism and those from general RAFT mechanism showed that this simplified mechanism can accurately predict RAFT polymerization in the absence of side reactions to adduct radicals other than fragmentation. However, significant errors are introduced at high conversion when side reactions to adduct are present. The chain transfer coefficient of RAFT agent is the key factor in RAFT polymerization. The polydispersity is more sensitive to chain transfer coefficient at low conversion. At high conversion, however, the polydispersity is mainly determined by termination, which can be controlled by RAFT agent concentration and the selection of initiator. At last, an analytical equation is derived to directly estimate chain transfer coefficient of RAFT agent from the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

Comparison of styrene reversible addition–fragmentation chain‐transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene‐alt‐maleic anhydride) and sodium dodecyl sulfate

In this study, we conducted the reversible addition–fragmentation chain‐transfer (RAFT) polymerization of styrene (St) in a miniemulsion system stabilized by two different stabilizers, ammonlysis poly(styrene‐alt‐maleic anhydride) (SMA) and sodium dodecyl sulfate (SDS), with identical reaction conditions. The main objective was to compare the polymerization kinetics, living character, latex stability, and particle morphology. The macro‐RAFT agent used in both systems was SMA, which was obtained by RAFT solution polymerization mediated by 1‐phenylethyl phenyldithioacetate. The experimental results show that the St RAFT miniemulsion polymerization stabilized by SDS exhibited a better living character than that stabilized by ammonlysis SMA. The final latices were very stable in two systems, but different stabilizers had an obvious effect on the polymerization kinetics, living character, and particle morphology. All of the particles obtained by RAFT miniemulsion polymerization stabilized by SDS were solid, but an obvious core–shell structure was observed in the miniemulsion system stabilized by ammonlysis SMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Electro‐optical properties of polymer‐dispersed liquid crystal prepared by controlled graft living radical polymerization

Living graft macromolecule has been prepared through reversible addition‐fragmentation chain transfer (RAFT) living radical polymerization in one step. Then, it was used to make polymer‐dispersed liquid crystal (PDLC) by controlling the mole ratio of styrene (St) to 1,6‐hexanediol diacrylate (HDDA) and adjusting the content of prepared graft macromolecule. The results showed that electro‐optical properties of PDLC have been optimized. Different concentration of living graft macromolecule and different mole ratio of St/HDDA led to substantial improvement of driving voltage (threshold voltage and saturation voltage) and memory effect of PDLC simultaneously. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Functionalization of poly(ester‐urethane) surface by radiation‐induced grafting of N‐isopropylacrylamide using conventional and reversible addition–fragmentation chain transfer‐mediated methods

The functionalization of poly(ester‐urethane) (PUR) surface was conducted using radiation‐induced grafting. A thermosensitive layer constructed from N‐isopropylacrylamide (NIPAAm) was introduced onto a polyurethane film and characterized using attenuated total reflection Fourier transform infrared and X‐ray photoelectron spectroscopies and contact angle measurements. Size exclusion chromatography was used to analyse the PUR‐graft‐PNIPAAm copolymers and homopolymers formed in solution. Additionally, reversible addition–fragmentation chain transfer (RAFT) polymerization was performed in order to obtain PNIPAAm‐grafted surfaces with well‐defined properties. Atomic force microscopy was used to evaluate the surfaces synthesized via conventional and RAFT‐mediated grafting methods. The results of various techniques confirmed the successful grafting of NIPAAm from PUR film. © 2015 Society of Chemical Industry     

Electro‐optical properties of polymer dispersed liquid crystal prepared by successively controlled living radical polymerization

Polymer dispersed liquid crystal (PDLC) films were obtained by successive controlled living radical polymerizations: starting polystyrene (M1) was obtained by reversible addition‐fragmentation polymerization (RAFT), M1 was converted to P‐chloromethylated polystyrene (M2) which was grafted with polystyrene branches by atom transfer radical polymerization (ATRP) to yield RAFT‐initiating graft polymer containing trithiocarbonate moieties in the backbone (M3, RAFT‐active grafted polystyrene), and then PDLC films were prepared by photo‐induced RAFT copolymerization of methyl acrylate with M3 in the presence of a nematic liquid crystal. The electro‐optical properties of the films were investigated for the purpose to apply them to optical devices. Experimental results showed that preferable properties could be acquired by controlling the amount of M3 and the liquid crystal E7 in the polymer matrix of PDLC films. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers