Support interaction of Pt/CeO_2 and Pt/SiC catalysts prepared by nano platinum colloid deposition for CO oxidation

The interaction between Pt and its various supports can regulate the intrinsic electronic structure of Pt particles and their catalytic performance.Herein,Pt/CeO_2 and Pt/SiC catalysts were successfully prepared via a facile Pt colloidal particle deposition method,and their catalytic performance in CO oxidation was investigated.XRD,TEM,XPS and H_2-TPR were used to identify the states of Pt particles on the support surface,as well as their effect on the performance of the catalysts.Formation of the Pt-O-Ce interaction is one of the factors controlling catalyst activity.Under the oxidative treatment at low temperature,the Pt-O-Ce interaction plays an important role in improving the catalytic activity.After calcining at high temperature,enhanced Pt-O-Ce interaction results in the absence of metallic Pt~0 on the support surface,as evidenced by the appearance of Pt~(2+) species.It is consistent with the XPS data of Pt/CeO_2,and is the main reason behind the deactivation of the catalyst.By contrast,either no interaction is formed between Pt and SiC or Pt nanoparticles remain in the metallic Pt~0 state on the SiC surface even after aging at 800℃in an oxidizing atmosphere.Thus,the Pt/SiC shows better thermal stability than Pt/CeO_2.The interaction between Pt and the active support may be concluded to be essential for CO oxidation at low temperature,but strong interactions may induce serious deactivation of catalytic activity.     

Synthesis and photoluminescence properties of Er3+ and Dy3+ doped Na2NbAlO5 phosphors

A series of Ln³⁺ (Ln³⁺ = Er³⁺/Dy³⁺) ions doped Na₂NbAlO₅ (NNAO) phosphors were synthesized by solid-state method. The Er³⁺ and Dy³⁺ ions doped phosphors were characterized by XRD, photoluminescence (PL) and decay profiles. The Ln³⁺-doped samples are consistent with the pure NNAO phase which is analyzed by the X-ray diffraction result. The PL graphs show that the intensity of luminescence increases with the increasing doping concentrations up to their critical certain values and then decreases at higher concentrations due to the concentration quenching effect of Er³⁺/Dy³⁺ ions. The energy level diagrams containing the positions of 4f and 5d energy levels of Er³⁺ and Dy³⁺ ions have been established and studied. In addition, under the ultraviolet light, the prepared NNAO:xLn³⁺ (Ln³⁺ = Er³⁺/Dy³⁺) phosphors show the characteristic green (Er³⁺), cyan (Dy³⁺) emission, respectively. Under the excitation of 365 nm, the quantum efficiencies of NNAO:0.01Er³⁺ and NNAO:0.03Dy³⁺ phosphors are measured to be 61.7% and 72.2%, respectively. The obtained results indicate that the new NNAO:xLn³⁺ (Ln³⁺ = Er³⁺/Dy³⁺) phosphors are promising applications in white-light emitting diodes field.     

Synthesis of NaYF4:20% Yb3+,2% Er3+,2% Ce3+@NaYF4 nanorods and their size dependent uptake efficiency under flow condition

Lanthanide doped fluorescent nanoparticles have gained considerable attention in biomedical applications. However, the low uptake efficiency of nanoparticles by cells has limited their applications. In this work, we demonstrate how the uptake efficiency is affected by the size of nanoparticles under flow conditions. Using the same size NaYF₄:20% Yb³⁺,2% Er³⁺,2% Ce³⁺ (the contents of rare earths elements are in molar fraction) nanoparticles as core, NaYF₄:20% Yb³⁺,2% Er³⁺,2% Ce³⁺@NaYF₄ core–shell structured nanorods (NRs) with different sizes of 60–224 nm were synthesized by thermal decomposition and hot injection method. Under excitation at 980 nm, a strong upconversion green emission (541 nm, ²H_11/2 → ⁴I_15/2 of Er³⁺) is observed for all samples. The emission intensity for each size nanorod was calibrated and is found to depend on the width of NRs. Under flow conditions, the nanorods with 96 nm show a maximum uptake efficiency by endothelial cells. This work demonstrates the importance of optimizing the size for improving the uptake efficiency of lanthanide-doped nanoparticles.     

Synthesis and luminescent properties of BaGd2O4:Eu3+ phosphors with highly efficient red-emitting

The BaGd_(2-2 x)Eu_(2 x)O_4(BG, x = 0.01-0.09) phosphors were successfully synthesized via the sol-gel method,and BaY_(2-2 y)Eu_(2 y)O_4(BY, y = 0.005-0.07) phosphors were included for comparison. The pure phase BG phosphors with the ordered CaFe_2 O_4-type structure are obtained by annealing at 1300℃ for5 h. The phosphors with uniform particle size of 120 nm and good dispersion display typical Eu~(3+)emission with the strongest peak at 613 nm(~5 D_0→~7 F_2 transition of Eu3+) under optimal excitation band at 262 nm(CTB band). The presence of Gd~(3+) excitation bands on the PLE spectra monitoring the Eu3+emission directly proves an evidence of Gd~(3+)-Eu~(3+) energy transfer. Owing to the concentration quenching, the optimum content of Eu3+ addition is 5 at%(x = 0.05), and the quenching mechanism is determined to be the exchange reaction between Eu3+. All the BG samples have similar color coordinates and temperature of(0.64 ± 0.02, 0.36 ± 0.01) and 2000 ± 100 K,respectively. The lifetime value of BaGd_(1.9)Eu_(0.1)O_4 for 613 nm is fitted to be 2.19 ± 0.01 ms, and the Eu~(3+) concentration does not change the lifetime significantly. Owing to the Gd~(3+)-Eu~(3+) energy transfer, the luminescent intensity of the BaGd_(1.9)Eu_(0.1)O_4 phosphor is better than BY system. The BG system served as a new type of phosphor is expected to be widely used in lighting and display areas.     

Synthesis,crystal structure and photoluminescence properties of novel double perovskite La2CaSnO6:Eu3+ red-emitting phosphors

A series of new double perovskite La_2–xEu_xCaSnO₆ (0 ≤ x ≤ 0.8) red phosphors were synthesized by traditional solid-state reaction. The phase, microstructure, photoluminescence (PL) properties, quantum efficiency, and thermal stability of the phosphors were investigated. La₂CaSnO₆ matrix has a monoclinic double perovskite structure with space group P2₁/n. Under near-ultraviolet (UV) light at 395 nm, La_2–xEu_xCaSnO₆ phosphors exhibit the most typical red emission peak at 614 nm, which corresponds to ⁵D₀→⁷F₂ electric dipole transition of Eu³⁺. The optimum Eu³⁺ doping content is attained at x = 0.5, and the La_1.5Eu_0.5CaSnO₆ phosphor shows a moderate quantum efficiency (32.3%) and high color purity (92.2%). Besides, the temperature-dependent spectrum of the phosphor was studied. The emission intensity of Eu³⁺ at 423 K decreases to 70.94% of the initial intensity at 303 K, and the activation energy ΔE is estimated to be 0.232 eV, suggesting that the phosphors possess good thermal stability. The fabricated w-LED based on the phosphors has higher R_a (89), lower CCT (4539K), and better chromaticity coordinates (0.371, 0.428). These results prove that the Eu³⁺-doped La₂CaSnO₆ red phosphor has great potential applications in w-LEDs.     

Synthesis and luminescence properties of SrAleO4：Eue＋,Dy3＋ hollow microspheres via a solvothermal co-precipitation method

SrAl2O4:Eu2+,Dy3+ hollow microspheres were successfully prepared through a facile and mild solvothermal co-precipitation combining with a postcalcining process.The structure and particle morphology were investigated by X-ray diffraction(XRD),scanning and transmission electron microscopy(SEM and TEM)pictures,respectively.The mechanism for the formation of spherical SrAl2O4:Eu2+,Dy3+ phosphor was preliminary presented.After being irradiated with ultraviolet(UV)light,the spherical phosphor emitted long-lasting green phosphorescence.Both the photoluminescence(PL)spectra and luminance decay,compared with that of commercial bulky powders,revealed that the phosphors had efficient luminescent and long lasting properties.It was considered that the SrAl2O4:Eu2+,Dy3+ hollow microspheres had promising long-lasting phosphorescence with potential scale-dependent applications in photonic devices.     

Characterization and electrochemical performance of CeO2 and Eu-doped CeO2 films as a manganese redox flow battery component

Hexagonal CeO_2 and Eu-doped CeO_2 nanoparticles were obtained using a facile microwave-hydro thermal method under mild conditions and their application towards manganese redox flow battery component were studied. The structural properties were studied by X-ray diffraction and indicate that samples present a fluorite structure. Raman spectroscopy shows Eu3+ ions substitute Ce~(4+) and generate oxygen vacancies. Electrochemical properties of pure and Eu-doped CeO_2 films deposited at graphite substrates investigated by cyclic voltammetry and galvanostatic charge—discharge indicate that dopant concentration affects the electrochemical properties of CeO_2. The increase in the reversibility redox of electrochemical systems observed is attributed to coexistence of Ce~(4+)/Ce~(3+) redox couple confirmed by XPS.Charge—discharge tests display coulombic and voltage efficiency values of above 80% and 90%, respectively. The obtained specific capacity for Ce_(0.99)Eu_(0.01)O_2(372.49 mAh/g) and pure oxide(334.84 mAh/g)indicates that both samples are promising for application in Mn-batteries.     

Luminescence properties of a single-host phosphor Bal.8-wSrwLi0.4SiO4： cea＋,Eu2＋,Mn2＋ for WLED

In order to obtain a single-host-white-light phosphor,a series of Ba1.8-w-x-y-zSrwLi0.4-xCexEuyMnzSiO4(BSLS:Ce3+,Eu2+,Mn2+)powder samples were synthesized via high temperature solid-state reaction.The structure and photoluminescence properties were investigated.Under ultraviolet excitation,the emission spectra contained three bands:the 370-470 nm blue band,the 470-570 nm green band and the 570-700 nm red band,which arose from the 5d→4f transitions of Ce3+ and Eu2+,and the 4T1→6A1 transition of Mn2+,respectively.The excitation spectra of the emissions of Ce3+ and Mn2+ ions showed the energy transfer from Ce3+ to Mn2+.White light emission was obtained from the tri-doped samples of appropriate doping concentration under 310-360 nm excitation.     

Preparation and luminescent properties of CaF2:Ln3+ (Ln:Er,Er/Yb)/Nafion composite films

In this work, CaF_2:Ln~(3+)(Ln:Er,Er/Yb)/Nafion composite films were prepared using Nafion as modifications and matrices by dripping method. The composite films were characterized by Fourier transform infrared spectroscopy(FT-IR), X-ray diffraction(XRD) and scanning electron microscopy(SEM). Composite films are transparent and CaF_2:Ln~(3+)(Ln:Er,Er/Yb) nanoparticles are well dispersed in Nafion films.The thicknesses of CaF_2:Er~(3+)/Nafion and CaF_2:Er~(3+),Yb~(3+)/Nafion composite film are about 77 and 73 μm,respectively. The nanoparticles in composite film possess cubic phase. CaF_2:Er~(3+),Yb~(3+)/Nafion composite film has stronger characteristic emission of Er~(3+) around 1530 nm with full width at half-maximum(FWHM) of 73 nm and longer luminescence lifetimes of 22.04 μs(25.03%) and 100.77 μs(74.97%).     

Dielectric and microstructural properties of YAG:Dy3+ ceramics

Yttrium aluminium garnet(Y_3 Al_5 O_(12):YAG) singly doped with Dy3+ at different concentrations was prepared by solid state reactions using repeated heating cycles over the temperature range of 1300-1600 ℃. X-ray powder diffraction analysis confirms the presence of a well-crystallized YAG perovskite phase with cubic structure(by Rietveld refinement). The rare earth dopant is successfully integrated into the YAG host lattice without any major changes in the original structure. The temperature dependence,up to 250 ℃, of the conductivity, dielectric constant, dielectric loss, and loss tangent, at various frequencies of up to 5.0 MHz for undoped and doped crystals is compared to understand the electrical and structural characteristics. The experimental results reveal that Dy3+ dopants in YAG crystal significantly influence the conductivity, dielectric constant, and lossy mechanisms, which is probably due to the 3 d-AI ions and 4 f-Dy ions incorporated at different positions of both tetrahedral and octahedral symmetries in YAG:xDy3+ ceramics.     

The variation of microstructures,spectral characteristics and catalysis effects of Fe~(3+) and Zn~(2+) co-doped CeO_2 solid solutions

Fe³⁺and Zn²⁺ions were doped into the lattice of CeO₂ via the hydrothermal method.The micro structure and spectra features were analyzed systemically.XRD results show that the solid solubility of Fe³⁺and Zn²⁺ions in Ce_1-x(Fe_0.5Zn_0.5)_xO₂ can be identified as x=0.16.The cell volumes are decreased by increasing the doped content.The TEM graphs prove that the grain size of the sample is about...     

Luminescent Properties of Green Phosphor Ca8Mg（SiO4 ）4 Cl2：EU^2＋ , DY^3＋ for LED Applications

The new phosphor calcium magnesium chlorosilicate, codoped with Eu^2＋ and Dy^3＋, was synthesized with the help of the high temperature solid state reaction in reducing atmosphere. The excitation and emission spectra were very similar to that of Ca8Mg（SiO4）4Cl2 ：Eu^2＋, and the Dy^3＋ concentration influenced the emission intensity of this phosphor. The intensity of Eu^2＋ and Dy^3＋ codoped CMSC was stronger than that of Eu^2＋ singly doped CMSC. The emission spectrum of the Dy^3＋ ion overlapped the absorption band of the Eu^2＋ ion, indicating that an energy transfer from Dy^3＋ to Eu^2＋ took place in CMSC：Eu^2＋, Dy^3＋ phosphor. The mechanism of the energy transfer from Dy^3＋ tO Eu^2＋, in this phosphor, might be resonant energy transfer.     

Effects of Bi3+ on down-/up-conversion luminescence,temperature sensing and optical transition properties of Bi3+/Er3+ co-doped YNbO4 phosphors

A series of YNbO₄:Bi³⁺ and YNbO₄:Bi³⁺/Er³⁺ phosphors were prepared by a conventional high temperature solid–state reaction method. The results of XRD and Rietveld refinement confirm that monoclinic phase YNbO₄ samples are achieved. The down-/up-conversion luminescence of Er³⁺ ions was investigated under the excitation of ultraviolet light (327 nm) and near infrared light (980 nm). Under 327 nm excitation, broad visible emission band from Bi³⁺ ions and characteristic green emission peaks from Er³⁺ ions are simultaneously observed, while only strong green emissions from Er³⁺ ions are detected upon excitation of 980 nm. Remarkable emission enhancement is observed in down-/up-conversion luminescence processes by introducing Bi³⁺ ions into Er³⁺-doped YNbO₄ phosphors. Pumped current versus up-conversion emission intensity study shows that two-photon processes are responsible for both the green and the red up-conversion emissions of Er³⁺ ion. Through the study of the temperature sensing property of Er³⁺ ion, it is affirmed that the temperature sensitivity is sensitive to the doping concentration of Bi³⁺ ions. By comparing the experimental values of the radiative transition rate ratio of the two green emission levels of Er³⁺ ions and the theoretical values calculated by Judd-Ofelt (J-O) theory, it is concluded that the temperature sensing property of Er³⁺ ions is greatly affected by the energy level splitting.     

Synthesis, structure and luminescence properties of KEu0.01Gd0.19Yb0.8（WO4）2 powder

The synthesis of co-doped KEu_0.01Gd_0.19Yb_0.8(WO₄)₂ was achieved by a modified Pechini method at 750 °C. The structure of obtained compound was confirmed using X-ray diffraction measurement and Raman spectroscopy. The Scherrer's formula was used to confirm the grain sizes visualized by TEM technique. The grain sizes of about 100 nm of monoclinic KGW were successfully obtained by this methodology. In order to study spectroscopic properties of the prepared system the emission spectra were measured. The effective down- and up-conversion processes in non-resonant system were investigated.     

Synthesis and Crystal Structure of A Bimetallic Terbium Complex Tb2 {μ-CH2 SiMe2 NC6 H3 ^iPr2 -2, 6}3 （THF）3

The reaction of 2, 6-^iPr2CbH3NHSiMe3 with Tb（CH2SiMe3）3（THF）2 in benzene at room temperature afforded a binuclear terbium complex Tb2 {μ-CH2 SiMe2 NC6 H3 ^iPr2 -2, 6}3（THF）3. X-ray diffraction revealed that Tb atoms were bridged by three methylene units. One Tb atom was six-coordinated by two nitrogen atoms, three methylene carbons, and one THF molecule, while the other Tb atom was six-coordinated by one nitrogen atom, three methylene carbons, and two THF molecules. Both Tb atoms adopted a distorted trigonal prism geometry.     

Growth and property enhancement of Er3+-doped 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 single crystal

Er~(3+)-modified 0.68 Pb(Mg_(1/3)Nb_(2/3))O_3-0.32 PbTiO_3(PMN-32 PT) single crystals were grown by using the flux method. The growth mechanism of the crystal and influences of Er~(3+) ions on phase structure,electrical and optical properties were investigated. Results reveal that the crystals are still pure perovskite structure with Er3+ ions doping, but lattice enlarges slightly. The coercive electric field is increased from 4.83 to 6.37 kV/cm for [100]-oriented crystals comparing to undoped PMN-32 PT single crystals.Moreover, the crystal exhibits upconversion emission properties. Green(531 and 552 nm) and red(670 nm) emission bands are recorded under the excitation of 980 nm diode laser, which correspond to the ~2 H_(11/2)→~4 I_(15/2), ~4 S_(3/2)→~4 I_(15/2) and ~4 F_(9/2)→~4 I_(15/2) transitions of Er~(3+) ions. Our results show the feasibility of using this crystal in photoelectric multifunctional devices.     

交联羧甲基壳聚糖的合成及其对Pb2+、Cd2+和Co2+的吸附行为

在超声波辐射作用下,以非质子溶剂二甲亚砜为溶剂,制备了新型吸附剂交联羧甲基壳聚糖。利用X-射线光电子能谱、傅里叶红外光谱等分析手段对样品进行了测试和表征。以Pb²⁺、Cd²⁺和Co²⁺为吸附对象,考察了溶液初始浓度、吸附时间、酸度等因素对吸附过程的影响。等温线实验表明Langmuir吸附模型适合模拟金属离子在交联羧甲基壳聚糖表面的吸附过程,说明金属离子在交联羧甲基壳聚糖表面的吸附为单分子层吸附,交联羧甲基壳聚糖对Pb²⁺、Cd²⁺和Co²⁺的最大吸附容量分别为282.49mg/g、328.95mg/g和134.41mg/g。动力学实验表明,准二级方程适合描述此吸附过程。     

Hydrothermal Synthesis of RbLn2F7 and VUV Spectroscopy of RbLn2 F7 ：Eu^3＋（Ln=Gd, Y）

RbLn2F7（Ln = Gd, Y, Er, Yb and Lu）, crystallized in the hexagonal RbEr2F7 structure type, is synthesized by a hydrothermal method. The excitation spectra of Eu^3 ＋ -doped RbGd （Y）2F7 suggest that the oxygen content is very low in the samples obtained by hydrothermal synthesis. Only the f-f transitions of Gd^3＋ ions are observed in the excitation spectrum of RbGd2F7：Eu^3＋ （0.5mol%）, while those of Eu^3＋ ions do not appear. When the Gd^3＋ ions are excited, the absorbed energy is transferred efficiently from Gd^3＋ to Eu^3＋ . The spectra show that the doped Eu^3＋ ions are located in non-centrosymmetric sites in hexagonal RbLn2F7.     

Structural and Electrical Properties of Layered Pervoskite Manganites Nd2-2x Sr1＋2x Mn2O7 （x=0.25, 0.3, 0.4）

Tetragonally layered perovskite manganites of Nd2-2xSr1＋2xMn2O7（x =0.25, 0.3, 0.4） were fabricated by using solid-state reaction technique. Structural characterization of the compounds was investigated by X-ray diffraction （XRD） and FT-IR absorption spectra. The XRD patterns revealed that all the samples were single phase. X-ray photoemission spectroscopy （XPS） was used to investigate their electronic structures. It was found that manganese was in mixed states of Mn^3＋ and Mn^4＋ whereas lattice oxygen and chemical absorbed oxygen were existed in all the samples. The high temperature electrical properties of Nd2-2xSr1＋2xMn2O7 （x = 0.3, 0.4） were measured by standard four-probe technique. The results showed that both compounds had semi-conductivity behavior in the temperature range of 300 - 1073 K, and the electrical conduction was dominated by thermally activated behavior above 500 K.     

Colour modulation and enhancement of upconversion emissions in K2NaScF6:Yb/Ln (Ln = Er,Ho, Tm) nanocrystals

Effective colour modulation of upconversion emissions in lanthanide-doped nanomaterials becomes even more important for fundamental and applied research. Herein, on the one hand, by raising the content of doped Yb³⁺ from 10 mol% to 50 mol%, a significant increase of the red/green emission ratio from 4.0 to 68.2 is observed in K₂NaScF₆:Yb/Er nanocrystals. This yellow to red colour change is attributed to the increased cross relaxation between Er³⁺ and Yb³⁺ caused by the increased Yb³⁺ amount, ⁴S_3/2 (Er³⁺) + ²F_7/2 (Yb³⁺) → ⁴I_13/2 (Er³⁺) + ²F_5/2 (Yb³⁺). On the other hand, the upconversion green and red emission of K₂NaScF₆:Yb/Er (20/2 mol%) nanocrystals are intensified 10.6 and 8.8 folds, respectively, after an active shell (K₂NaScF₆:Yb) is epitaxially grown, which are more effective than the 7.4- and 6.4-fold enhancement from an inert shell (K₂NaScF₆) growth. Moreover, the shell thickness from 2.85 to 9.5 nm through controlling the molar ratio of shell-precursor to core from 1:2 to 3:1 can be easily realized. This study will provide more opportunities for the application of K₂NaScF₆:Yb/Ln nanoparticles in varied fields such as theranostics, photovoltaics, and photocatalysis.