A heuristic method for two-stage hybrid flow shop with dedicated machines

This paper considers a two-stage hybrid flow shop scheduling problem with dedicated machines, in which the first stage contains a single common critical machine, and the second stage contains several dedicated machines. Each job must be first processed on the critical machine in stage one and depending on the job type, the job will be further processed on the dedicated machine of its type in stage two. The objective is to minimize the makespan. To solve the problem, a heuristic method based on branch and bound (B&B) algorithm is proposed. Several lower bounds are derived and four constructive heuristics are used to obtain initial upper bounds. Then, three dominance properties are employed to enhance the performance of the proposed heuristic method. Extensive computational experiments on two different problem categories each with various problem configurations are conducted. The results show that the proposed heuristic method can produce very close-to-optimal schedules for problems up to 100 jobs and five dedicated machines within 60 s. The comparisons with solutions of two other meta-heuristic methods also prove the better performance of the proposed heuristic method.     

Branch-and-bound method for minimizing the weighted completion time scheduling problem on a single machine with release dates

In this paper, we consider a single-machine scheduling problem with release dates. The aim is to minimize the total weighted completion time. This problem is known to be strongly NP-hard. We propose two new lower bounds that can be, respectively, computed in O(n²) and in O(nlogn) time where n is the number of jobs. We prove a sufficient and necessary condition for local optimality, which can also be considered as a priority rule. We present an efficient heuristic using such a condition. We also propose some dominance properties. A branch-and-bound algorithm incorporating the heuristic, the lower bounds and the dominance properties is proposed and tested on a large set of instances.     

Local and global dominance conditions for the weighted earliness scheduling problem with no idle time

In this paper, we present dominance conditions for the single machine weighted earliness scheduling problem with no idle time. We also propose an algorithm that can be used to improve upper bounds for the weighted earliness criterion and lower bounds for an earliness/tardiness problem. The computational tests show that the algorithm is superior to an initial heuristic schedule and an existing adjacency condition.     

Local and global dominance conditions for the weighted earliness scheduling problem with no idle time

In this paper, we present dominance conditions for the single machine weighted earliness scheduling problem with no idle time. We also propose an algorithm that can be used to improve upper bounds for the weighted earliness criterion and lower bounds for an earliness/tardiness problem. The computational tests show that the algorithm is superior to an initial heuristic schedule and an existing adjacency condition.     

Trade-off solutions in a single-machine scheduling problem for minimizing total earliness and maximum tardiness

This paper considers a single-machine scheduling problem involving minimization of the total earliness and the maximum tardiness. Four dominant properties for the precedence relationship between jobs in a search for an optimal solution are proposed. The lower bounds of the total earliness and the maximum tardiness of a subproblem are derived. The dominance properties and the lower bounds are implemented in the branchand-bound algorithm to facilitate the search for an optimal schedule. A heuristic algorithm is then developed to overcome the inefficiency of the branch-and-bound algorithm. Computational performance of the two algorithms is also investigated.     

Minimizing total tardiness in a two-machine re-entrant flowshop with sequence-dependent setup times

We consider a two-machine re-entrant flowshop scheduling problem in which all jobs must be processed twice on each machine and there are sequence-dependent setup times on the second machine. For the problem with the objective of minimizing total tardiness, we develop dominance properties and a lower bound by extending those for a two-machine re-entrant flowshop problem (without sequence-dependent setup times) as well as heuristic algorithms, and present a branch and bound algorithm in which these dominance properties, lower bound, and heuristics are used. For evaluation of the performance of the branch and bound algorithm and heuristics, computational experiments are performed on randomly generated instances, and results are reported.     

Scheduling deteriorating jobs on a single machine with release times

This paper investigates a single-machine deteriorating job scheduling problem with job release times where its objective is to minimize the makespan. The problem is known to be NP-hard. Therefore, a branch-and-bound algorithm incorporating with several dominance properties and lower bounds is proposed to derive the optimal solution for the problem. In addition, easy-implemented heuristic algorithms are also provided to obtain the near-optimal solution. The computational experiments indicate that the branch-and-bound algorithm can solve most of the medium-job-sized problems within a reasonable time, and the heuristic is quite accurate with an average error percentage of less than 0.3%.     

Minimizing total completion time for re-entrant flow shop scheduling problems

In this paper, we study re-entrant flow shop scheduling problems with the objective of minimizing total completion time. In a re-entrant scheduling problem, jobs may visit some machines more than once for processing. The problem is NP-hard even for machine number m=2. A heuristic algorithm is presented to solve the problem, in which an effective k-insertion technique is introduced as the improvement strategy in iterations. Computational experiments and analyses are performed to give guidelines of choosing parameters in the algorithm. We also provide a lower bound for the total completion time of the optimal solution when there are only two machines. Objective function values of the heuristic solutions are compared with the lower bounds to evaluate the efficiency of the algorithm. For randomly generated instances, the results show that the given heuristic algorithm generates solutions with total completion times within 1.2 times of the lower bounds in most of the cases.     

Single-machine scheduling with periodic and flexible periodic maintenance to minimize maximum tardiness

This paper considers a single-machine scheduling problem with several maintenances periods. Specifically, two situations are investigated. In the first one, maintenance periods are periodically fixed: maintenance is required after a periodic time interval. In the second one, the maintenance is not fixed but the maximum continuous working time of the machine which is allowed is determined. The objective is to minimize the maximum tardiness. These problems are known to be strongly NP-hard. We propose some dominance properties and an efficient heuristic. Branch-and-bound algorithms, in which the heuristics, the lower bounds and the dominance properties are incorporated, are proposed and tested computationally.     

A branch-and-bound algorithm for the three-machine flowshop scheduling problem with bicriteria of makespan andtotal flowtime

This paper addresses the three‐machine flowshop scheduling problem with a bicriteria of minimizing a weighted sum of makespan and total flowtime. Three lower bounds, an upper bound, and several dominance relations are developed. The upper bound is developed using a two‐phase hybrid heuristic method. A branch‐and‐bound algorithm, incorporating the developed bounds and dominance relations, is presented. An extensive computational analysis on randomly generated problems is conducted. The analysis indicates that the proposed bounds, dominance relations, and branch‐and‐bound algorithm are efficient.     

A branch and bound algorithm for minimizing total completion time on a single batch machine with incompatible job families and dynamic arrivals

In this paper, we consider a single batch machine scheduling problem with incompatible job families and dynamic job arrivals. The objective is to minimize the total completion time. This problem is known to be strongly NP-hard. We present several dominance properties and two types of lower bounds, which are incorporated to construct a basic branch and bound algorithm. Furthermore, according to the characteristics of dynamic job arrivals, a decomposed branch and bound algorithm is proposed to improve the efficiency. The proposed algorithms are tested on a large set of randomly generated problem instances.     

Earliness–tardiness scheduling with setup considerations

The one-machine scheduling problem with sequence-dependent setup times and costs and earliness–tardiness penalties is addressed. A time-indexed formulation of the problem is presented as well as different relaxations that give lower bounds of the problem. Then, a branch-and-bound procedure based on one of these lower bounds is presented. The efficiency of this algorithm also relies on new dominance rules and on a heuristic to derive good feasible schedules. Computational tests are finally presented.     

A branch and bound algorithm for an identical parallel machine scheduling problem with a job splitting property

We focus on the problem of scheduling n independent jobs on m identical parallel machines with the objective of minimizing total tardiness of the jobs considering a job splitting property. In this problem, it is assumed that a job can be split into sub-jobs and these sub-jobs can be processed independently on parallel machines. We develop several dominance properties and lower bounds for the problem, and suggest a branch and bound algorithm using them. Computational experiments are performed on randomly generated test problems and results show that the suggested algorithm solves problems of moderate sizes in a reasonable amount of computation time.     

A branch and bound algorithm for minimizing makespan on a single machine with unequal release times under learning effect and deteriorating jobs

We present a single-machine problem with the unequal release times under learning effect and deteriorating jobs when the objective is minimizing the makespan. In this study, we introduced a scheduling model with unequal release times in which both job deterioration and learning exist simultaneously. By the effects of learning and deterioration, we mean that the processing time of a job is defined by increasing function of its execution start time and position in the sequence. A branch-and-bound algorithm incorporating with several dominance properties and lower bounds is developed to derive the optimal solution. A heuristic algorithm is proposed to obtain a near-optimal solution. The computational experiments show that the branch-and-bound algorithm can solve instances up to 30 jobs, and the average error percentage of the proposed heuristic is less than 0.16%.     

Efficient primal-dual heuristic for a dynamic location problem

In this paper the dynamic location problem with opening, closure and reopening of facilities is formulated and an efficient primal-dual heuristic that computes both upper and lower limits to its optimal solution is described. The problem here studied considers the possibility of reconfiguring any location more than once over the planning horizon. This problem is NP-hard (the simple plant location problem is a special case of the problem studied). A primal-dual heuristic based on the work of Erlenkotter [A dual-based procedure for uncapacitated facility location. Operations Research 1978;26:992–1009] and Van Roy and Erlenkotter [A dual-based procedure for dynamic facility location. Management Science 1982;28:1091–105] was developed and tested over a set of randomly generated test problems. The results obtained are quite good, both in terms of the quality of lower and upper bounds calculated as in terms of the computational time spent by the heuristic. A branch-and-bound procedure that enables to optimize the problem is also described and tested over the same set of randomly generated problems.     

Two-machine flow shop scheduling with linear decreasing job deterioration

In this paper, we consider a two-machine flow shop scheduling problem with deteriorating jobs. By a deteriorating job, we mean that the processing time is a decreasing function of its execution start time. A proportional linear decreasing deterioration function is assumed. The objective is to find a sequence that minimizes total completion time. Optimal solutions are obtained for some special cases. For the general case, several dominance properties and some lower bounds are derived to speed up the elimination process of a branch-and-bound algorithm. A heuristic algorithm is also proposed to overcome the inefficiency of the branch-and-bound algorithm. Computational results for randomly generated problem instances are presented, which show that the heuristic algorithm effectively and efficiently in obtaining near-optimal solutions.     

Single-machine scheduling to minimize total convex resource consumption with a constraint on total weighted flow time

In this paper, we consider single-machine scheduling problem in which processing time of a job is described by a convex decreasing resource consumption function. The objective is to minimize the total amount of resource consumed subject to a constraint on total weighted flow time. The optimal resource allocation is obtained for any arbitrary job sequence. The computational complexity of the general problem remains an open question, but we present and analyze some special cases that are solvable by using polynomial time algorithms. For the general problem, several dominance properties and some lower bounds are derived, which are used to speed up the elimination process of a branch-and-bound algorithm proposed to solve the problem. A heuristic algorithm is also proposed, which is shown by computational experiments to perform effectively and efficiently in obtaining near-optimal solutions. The results show that the average percentage error of the proposed heuristic algorithm from optimal solutions is less than 3%.     

Algorithms for a two‐machine flowshop problem with jobs of two classes

We consider a problem of scheduling jobs of two classes of urgencies in a two‐machine flowshop with the objective of minimizing total tardiness of one class for urgent jobs and the maximum completion time of the other class for non‐urgent jobs. Urgent jobs are an important consideration in the real manufacturing systems, but it has not been studied due to the difficulty of the problem. In this research, a branch‐and‐bound (B&B) algorithm is proposed through developing lower bounds, dominance properties, and heuristic algorithms for obtaining an initial feasible solution. To evaluate the performance of the proposed algorithms, computational experiments on randomly generated instances are performed. Results of the experiments show that the suggested B&B algorithm can solve problems with up to 20 jobs in a reasonable amount of CPU time.     

Genetic algorithm for minimizing the total weighted completion time scheduling problem with learning and release times

This paper considers a single-machine problem with the sum-of-processing time based learning effect and release times. The objective is to minimize the total weighted completion times. First, a branch-and-bound algorithm incorporating with several dominance properties and two lower bounds are developed for the optimal solution. Then a genetic heuristic-based algorithm is proposed for a near-optimal solution. Finally, a computational experiment is conducted to evaluate the performances of the proposed algorithms. The results show that the branch-and-bound algorithm can solve instances up to 15 jobs, and the average error percentage of the genetic heuristic algorithm is less than 0.105%.     

Scheduling algorithms to minimize the number of tardy jobs in two-stage hybrid flow shops

This paper considers a two-stage hybrid flow shop scheduling problem for the objective of minimizing the number of tardy jobs. Each job is processed through the two production stages in series, each of which has multiple identical parallel machines. The problem is to determine the allocation of jobs to the parallel machines as well as the sequence of the jobs assigned to each machine. To solve the problem, a branch and bound algorithm, which incorporates the methods to obtain the lower and upper bounds as well as the dominance properties to reduce the search space, is suggested that gives the optimal solutions. In addition, two-phase heuristic algorithms are suggested to obtain good solutions for large-size problems within a reasonable amount of computation time. To show the performances of the optimal and heuristic algorithms suggested in this paper, computational experiments are done on a number of randomly generated test problems, and the test results are reported.