不同CO_2浓度下负直流电场对C_3H_8/O_2/Ar/CO_2预混火焰的影响规律

为了揭示电场对火焰效应与火焰传播速率的关系,在定容燃烧弹上研究了常温常压下、负直流电场(U=0、-5、-10 kV)对当量燃空比φ为1.0的C_3H_8/O_2/Ar/CO_2预混火焰影响规律随混合气中CO_2掺混浓度(混合气中CO_2体积分数分别为0、10%、15%、20%)的变化关系。实验结果表明:给定加载电压,随着CO_2掺混浓度的增大,C_3H_8/O_2/Ar/CO_2预混火焰传播速率降低,规范化火焰变形率与平均火焰传播速率变化率均增大。当U=-10 kV时,CO_2掺混浓度为0、10%、15%、20%时对应的平均火焰变形率分别为1.01、1.31、1.80、3.12,平均火焰传播速度变化率分别为10.87%、17.87%、19.16%和34.63%。研究结果表明负直流电场对C_3H_8/O_2/Ar/CO_2火焰传播的促进效应随着火焰传播速率的降低而显著增强。     

不同氧浓度下煤挥发分燃烧的化学动力学研究

燃煤有机污染物对人类健康和生态环境存在严重危害,而O₂对火焰中有机产物的形成具有明显的调控作用。鉴于煤挥发分燃烧是燃煤过程中至关重要的一环,本文以煤热解气为燃料,通过数值模拟研究了氧化剂侧O₂浓度对对冲扩散火焰中碳氢产物生成特性和机制的影响。结果表明,O₂浓度升高促进了O和OH的生成,进而提高H浓度,突显了含H和OH参与的反应的重要性。此外,乙炔(C₂H₂)、丙炔(PC₃H₄)、炔丙基(C₃H₃)、乙烯基乙炔(C₄H₄)、苯(C₆H₆)和萘(C₁₀H₈)的浓度均增大。增加O₂浓度促进了C₂H₂向PC₃H₄的转化,并使得C₃H₃更倾向于转化为丁二烯(C₄H₆),而富烯更倾向于通过苯基(C₆H₅)生成C₆H₆,因此C₆H₅作为C₆H₆前体的地位被加强。     

不同氧浓度下煤挥发分燃烧的化学动力学研究

燃煤有机污染物对人类健康和生态环境存在严重危害,而O₂对火焰中有机产物的形成具有明显的调控作用。鉴于煤挥发分燃烧是燃煤过程中至关重要的一环,本文以煤热解气为燃料,通过数值模拟研究了氧化剂侧O₂浓度对对冲扩散火焰中碳氢产物生成特性和机制的影响。结果表明,O₂浓度升高促进了O和OH的生成,进而提高H浓度,突显了含H和OH参与的反应的重要性。此外,乙炔(C₂H₂)、丙炔(PC₃H₄)、炔丙基(C₃H₃)、乙烯基乙炔(C₄H₄)、苯(C₆H₆)和萘(C₁₀H₈)的浓度均增大。增加O₂浓度促进了C₂H₂向PC₃H₄的转化,并使得C₃H₃更倾向于转化为丁二烯(C₄H₆),而富烯更倾向于通过苯基(C₆H₅)生成C₆H₆,因此C₆H₅作为C₆H₆前体的地位被加强。     

Pd-Rh/TiO2光催化CO2氧化乙烷脱氢研究

采用浸渍还原方法制备Pd-Rh/TiO₂催化剂用于常温光催化CO₂氧化乙烷脱氢制C₂H₄。研究不同Pd/Rh比催化剂的光反应性能,利用XRD、EDX-mapping、TEM、HRTEM、XPS技术表征催化剂表面和电子特性,通过UV-Vis、PL技术考察催化剂光响应性能,采用原位红外光谱技术分析Pd-Rh/TiO₂光催化CO₂氧化乙烷脱氢反应机理。研究表明,Pd-Rh双金属体系可有效提高光反应活性,光照下Pd和Rh金属之间存在内部电子转移的作用,降低了Pd表面的电子云密度,促进光生电子和空穴的分离,同时促进了C₂H₆和CO₂在材料表面的吸附。Ar替换CO₂的对比实验证明,反应中的CO₂消耗H₂,可消除催化剂表面积碳,促进C₂H₄生成。     

基于Langmuir-Hinshelwood动力学解析O2/CO2/H2O气氛下烟煤焦反应机理

流化床富氧燃烧湿烟气循环兼具经济与环保优势。湿烟气循环（O₂/CO₂/H₂O）条件下煤焦与O₂、CO₂及H₂O的反应同时发生。为探究O₂/CO₂/H₂O气氛下煤焦-O₂、煤焦-CO₂、煤焦-H₂O反应间的相互作用机制,在自制高精度热重实验装置上系统考察了O₂、CO₂、H₂O及其混合气氛下,典型烟煤焦在900℃的反应特性。基于吸附和脱附原理的Langmuir-Hinshelwood（L-H）机理性模型分别计算了烟煤焦与O₂、CO₂和H₂O反应的动力学参数。通过采用单独活性位点与竞争活性位点两种假设分析了O₂/CO₂、O₂/H₂O和CO₂/H₂O气氛下烟煤焦-O₂、烟煤焦-CO₂和烟煤焦-H₂O两两反应间的作用机制,揭示了H₂O分子优先吸附于烟煤焦表面活性位点,O₂分子次之,而CO₂分子相对滞后。O₂/CO₂/H₂O气氛下烟煤焦-O₂、烟煤焦-CO₂、烟煤焦-H₂O反应表现出部分竞争反应活性位点,传统的单独活性位点与竞争活性位点假设均无法准确描述其反应速率特性。基于H₂O分子优先,O₂分子次优先吸附的原理,建立了O₂、CO₂、H₂O混合气氛下煤焦反应速率L-H动力学方程,方程计算结果与实验值良好吻合。研究结果为深入分析煤焦颗粒流化床富氧燃烧特性及构建可靠、准确的燃烧反应模型提供了理论支撑。     

活化气氛对CO2加氢制取低碳烯烃Fe-K催化剂构-效关系

CO₂加氢直接制取低碳烯烃是实现其资源化利用的重要途径。通过热分解法制备了5种不同K含量（1%、3%、5%、7%、9%）的Fe-K催化剂用于CO₂加氢反应,结果表明Fe95-K5（95% Fe-5% K,质量分数）催化剂具有最优的活性及C₂～C₄烯烃选择性;随后对Fe95-K5催化剂进行了10% H₂/Ar、10% CO/Ar及5% CO/5% H₂/Ar 3种不同气氛活化处理以及CO₂加氢反应。结果发现,10% CO/Ar活化的催化剂具有最高的C₂～C₄烯烃选择性（38.1%）及链增长能力（α=0.644）。此外,还通过X射线衍射、Raman、程序升温等表征技术揭示了催化剂在不同活化气氛下的结构演变历程。研究发现,10% CO/Ar与5% CO/5% H₂/Ar活化的催化剂会生成γ₁型碳化铁结构,而10% H₂/Ar活化的催化剂则会在反应过程中生成γ₂型碳化铁结构,两种碳化铁结构对CO₂解离均有促进作用。     

联合发射光谱与动力学计算的非热等离子体重整CO2-CH4机理

非平衡等离子体重整CO₂-CH₄制合成气是实现2种温室气体资源化利用的新兴技术途径。综合采用发射光谱分析、反应动力学计算和连续质谱对常温常压介质阻挡放电(DBD)非热等离子体重整CO₂-CH₄反应途径进行探索。比功率S_EI为52 J/cm³时,可得到CH₄和CO₂转化率最大分别为22.8%和9.4%。稳态气相产物连续质谱在线分析表明,C₂H₄为C₂烃生成重要中间体,CH₄比例越高C₂烃生成量越大,且按C₂H₆2H₄2H₂顺序升高。发射光谱检测到·CH、·C₂自由基和CO、CO■特征谱线,·CH相对强度随比功率增加明显降低,CO■相对强...     

反应吸附强化C2/C3烃水蒸气重整制氢反应热力学计算

为拓宽反应吸附强化水蒸气重整制氢（ReSER）原料的应用范围,采用化工流程模拟软件Aspen Plus,针对包括C₂H₄、C₂H₆、C₃H₆、C₃H₈ 的C2/C3轻烃 ReSER制氢反应可行性和优化条件进行热力学分析计算。在选择的反应压力0.1～5 MPa,温度200～800℃,水碳摩尔比（S/C）1～8和吸附剂中氧化钙和原料碳摩尔比（Ca/C）0～5条件下进行热力学分析计算。计算结果表明：在优选的水碳比（S/C）4,钙碳比（Ca/C）2.5,温度200～650℃,压力0.1～1.8 MPa的条件下, C₂H₄、C₂H₆、C₃H₆、C₃H₈均可分别通过ReSER反应获得H₂含量在95%以上的产物,产物中H₂浓度均随着水碳比和钙碳比的增大而提高。在假设的水碳比4,钙碳比2.5条件下,当CO₂脱除率达到0.9以上,C₂H₄、C₂H₆、C₃H₆、C₃H₈的反应温度分别高于250、400、250、350℃时,产物中H₂摩尔分数均可达到95%以上,产物中的H₂浓度随着反应温度的升高和CO₂脱除率的增加而提高。当CO₂脱除率低于0.9,产物H₂摩尔分数要达到95%时,C₂H₄、C₂H₆、C₃H₆、C₃H₈的反应温度均需升高50℃。在相同长度C链的烃类中,烯烃比烷烃更容易发生ReSER反应。而原料的碳链越长,则越容易发生ReSER制氢反应。     

基于量子化学计算柴油在CO2/O2氛围下的燃烧特性

为研究柴油在CO₂/O₂氛围下燃烧反应机理与燃烧特性,本文提出了量子化学计算的机理与光学实验,通过分子平均局部离子化能和表面静电势分析分子的反应活性位点,通过计算化学计算了新的化学反应路径,对反应路径进行敏感性分析和简化,然后计算了火焰自然光度和火焰浮起长度,最后搭建了具备光学通道的定容燃烧弹实验平台并进行柴油燃烧的流体力学模拟。计算结果与实验结果对比结果表明,在35% CO₂+65% O₂氛围下火焰浮起长度最大误差、最小误差和平均误差分别为13.9%、0.5%和1.4%,均为可接受的误差,说明此机理适用于CO₂/O₂氛围下柴油燃烧特性的研究。高浓度二氧化碳会致使火焰发生分叉,引起湍流现象,并且二氧化碳在高温下会热解成一氧化碳和氧自由基。一氧化碳的碳端化学反应活性比氧端的大,碳端平均局部离子化能为12.62eV且静电势极小值为-0.51eV。     

带压环境中CO2/H2O/N2气体稀释对合成气层流火焰速度的影响

合成气稀释燃烧是燃气轮机高效低污染燃烧的重要运行方式。本文以CO₂、H₂O和N₂为稀释气体,利用数值模拟方法研究稀释比对不同压力下合成气（CO/H₂/CH₄）层流火焰速度（S_L）的影响规律,并从自由基浓度变化、敏感性数值和生成速率（rate of production,ROP）三个方面解析三种气体的物理和化学作用机理。结果表明,S_L随燃烧压力和稀释比的增大而不断减小,其中CO₂对层流火焰速度的抑制最为显著。稀释气体的物理效应对层流火焰速度的影响远大于化学效应,但CO₂和H₂O的化学效应不能忽略。化学效应则是通过改变H和OH自由基浓度影响S_L,其中CO₂稀释降低H和OH自由基浓度,H₂O稀释则是降低H自由基浓度,从而降低合成气的层流火焰速度。进一步反应动力学分析发现了H/OH浓度变化在低压、加压下的主要化学反应路径,且受H₂O稀释的化学反应速率对压力较CO₂更为敏感。     

Chemical Effects of CO2 Concentration on Soot Formation in Jet-stirred/Plug-flow Reactor

Soot formation was investigated numerically with CO2 addition in a jet-stirred/plug-flow reactor （JSR/PFR） C2H4/OJN2 reactor （C/O ratio of 2.2） at atmospheric pressure. An updated Kazakov mechanism empha- sizes the effect of the O2/CO2 atmosphere instead of an O2/N2 one in the premixed flame. The soot formation was taken into account in the JSR/PFR for C2H4/O2/N2. The effects of CO2 addition on soot formation in different C2H4/O2/CO2/N2 atmospheres were studied, with special emphasis on the chemical effect. The simulation shows that the endothermic reaction CO2 ＋ H - CO ＋ OH is responsible of the reduction of hydrocarbon intermediates in the CO2 added combustion through the supplementary formation of hydroxyl radicals. The competition of CO2 for H radical through the above forward reaction with the single most important chain branching reaction H ＋ O2, ＇ O ＋ OH reduces significantly the fuel burning rate. The chemical effects of CO2 cause a significant increase in residence time and mole fractions of CO and OH, significant decreases in some intermediates （H, C2H2）, polycyclic aromatic hydrocarbons （PAHs, C6H6 and CI6H10, etc.） and soot volume fraction. The CO2 addition will leads to a decrease by only about 5% to 20% of the maximum mole fractions of some C3 to Clo hydrocarbon intermediates. The sensitivity analysis and reaction-path analysis results show that C2H4 reaction path and products are altered due to the CO2 addition.     

Numerical Analysis on the Characteristics of Soot Particles in C2H4/CO2/O2/N2 Combustion

The purpose of this study is to investigate the characteristics of soot particles in C₂H₄/CO₂/O₂/N₂ combustion at equivalence ratio of 3.0-5.0. As the oxidant is switched from conventional air to CO₂/O₂/N₂ mixture, the key species C₂H₂, C₃H₃ responsible for formation of first aromatic ring, the typical aromatics and 4-ring aromatics total production rate all decrease greatly. In addition, with CO₂ mole fraction from 0.2 to 0.5 in the mixture, the soot particle number density, volume fraction, surface area density, which are three most important parameters to soot particle property, are suppressed obviously. Furthermore, the increasing content of CO₂ in the oxidizer influences mostly H, OH radical concentrations by two reactions: CO+OH=CO₂ H and H+O₂=O+OH, and the production rate of H, OH from the two reactions declined, which revealed that CO₂ in mixture has an inhibiting effect on soot particle generation.     

The selective reduction of NOx with propene on Pt-beta catalyst: A transient study

The mechanism of the NO/C₃H₆/O₂ reaction has been studied on a Pt-beta catalyst using transient analysis techniques. This work has been designed to provide answers to the volcano-type activity behaviour of the catalytic system, for that reason, steady state transient switch (C₃H₆/NO/O₂ → C₃H₆/Ar/O₂, C₃H₆/Ar/O₂ → C₃H₆/NO/O₂, C₃H₆/NO/O₂ → Ar/NO/O₂, Ar/NO/O₂ → C₃H₆/NO/O₂, C₃H₆/NO/O₂ → C₃H₆/NO/Ar and C₃H₆/NO/Ar → C₃H₆/NO/O₂) and thermal programmed desorption (TPD) experiments were conducted below and above the temperature of the maximum activity (T_max). Below T_max, at 200 °C, a high proportion of adsorbed hydrocarbon exists on the catalyst surface. There exists a direct competition between NO and O₂ for Pt free sites which is very much in favour of NO, and therefore, NO reduction selectively takes place over hydrocarbon combustion. NO and C₃H₆ are involved in the generation of partially oxidised hydrocarbon species. O₂ is essential for the oxidation of these intermediates closing the catalytic cycle. NO₂ is not observed in the gas phase. Above T_max, at 230 °C, C₃H_6 ads coverage is negligible and the surface is mainly covered by O_ads produced by the dissociative adsorption of O₂. NO₂ is observed in gas phase and carbon deposits are formed at the catalyst surface. From these results, the state of Pt-beta catalyst at T_max is inferred. The reaction proceeds through the formation of partially oxidised active intermediates (C_xH_yO_zN_w) from C₃H_6 ads and NO_ads. The combustion of the intermediates with O₂(g) frees the Pt active sites so the reaction can continue. Temperature has a positive effect on the surface reaction producing active intermediates. On the contrary, formation of NO_ads and C₃H_6 ads are not favoured by an increase in temperature. Temperature has also a positive effect on the dissociation of O₂ to form O_ads, consequently, the formation of NO₂ is favoured by temperature through the oxygen dissociation. NO₂ is very reactive and produces the propene combustion without NO reduction. These facts will determine the maximum concentration of active intermediates and consequently the maximum of activity.     

Silicone/non-silicone grafted blend composite membranes for air/vapor separation

Four types of new silicon-based graft blended polymers were developed and drawn to thin film composite membranes on high flux microporous polyetherimide support. The membranes and a 1 μm PDMS membrane as a standard were tested for the flux of the gases N₂, O₂, Ar, CH₄, CO₂, CH₃Cl, C₂H₅Cl, C₂H₆, and n-C₄H₁₀ and the vapors methanol (MeOH), t-butyl methyl ether (MTBE), 1, 1, 1-trichloroethane (Cl₃Eth), 1, 1, 2-trichlorofluoroethane (Cl₃F₃Eth), and n-hexane (n-C₆H₁₄). Methanol/argon mixtures were used to check the validity of the calculated selectivities. The results show higher performance for the newly developed membranes.     

Partial oxidation of light alkanes by NOx in the gas phase

Partial oxidations of CH₄, C₂H₆, C₃H₈, and iso-C₄H₁₀ with O₂ were promoted by addition of NO in the gas phase. The addition of NO increased the conversion rate of alkanes and decreased the initiation temperatures for the reactions. Moreover, selectivities and yields to oxygenates, aldehydes, ketones and alcohols, were remarkably improved by the addition of NO. The maxima of one-pass yields of oxygenates were 7% for CH₄, 11% for C₂H₆, 13% for C₃H₈, and 29% for iso-C₄H₁₀. It is suggested that NO₂ produced from NO and O₂ is the initiator for the oxidation of light alkanes. Alkyl nitrite was proposed as the reaction intermediate for the formation of oxygenates. The alkyl nitrite decomposes into oxygenates and NO that works as catalyst for the activation of O₂ and the oxidation of alkanes.     

Boosting selective C2H2/CH4, C2H4/CH4 and CO2/CH4 adsorption performance via 1,2,3-triazole functionalized triazine-based porous organic polymers

Nitrogen-rich porous organic polymers have shown great potentials in gas adsorption/separation, photocatalysis, electrochemistry, sensing and so on. Herein, 1,2,3-triazole functionalized triazine-based porous organic polymers (TT-POPs) have been synthesized by the copper-catalyzed azide-alkyne cycloaddition (Cu-AAC) polymerization reactions of 1,3,5-tris(4-azidophenyl)-triazine with 1,4-diacetylene benzene and 1,3,5-triacetylenebenzene, respectively. The characterizations of N₂ adsorption at 77 K show TT-POPs possess permanent porosity with BET surface areas of 666 m²·g^-1 (TT-POP-1) and 406 m²·g^-1 (TT-POP-2). The adsorption capacities of TT-POPs for CO₂, CH₄, C₂H₂ and C₂H₄, as well as the selective separation abilities of CO₂/N₂, CO₂/CH₄, C₂H₂/CH₄ and C₂H₄/CH₄ were evaluated. The gas selective separation ratio of TT-POPs was calculated by the ideal adsorbed solution theory (IAST) method, wherein the selective separation ratios of C₂H₂/CH₄ and C₂H₄/CH₄ of TT-POP-2 was 48.4 and 13.6 (298 K, 0.1 MPa), which is comparable to other adsorbents (5.6-120.6 for C₂H₂/CH₄, 10-26 for C₂H₄/CH₄). This work shows that the 1,2,3-triazole functionalized triazine-based porous organic polymer has a good application prospect in natural gas purification.     

Free-radical reactions involved in C1-C3 hydrocarbons interaction with oxide catalysts

Experimental proofs of a free radical mechanism in methane oxidative coupling, with homolytic rupture of the C---H bond are given. High concentrations of free radical sites are produced by mechanical milling of SiO₂. A study of C₁---C₃alkanes interaction with these sites allows to simulate the, processes of alkanes oxidation and oxidative dehydrogenation. The reactivity of ethane and propane is higher than that of methane in accordance with the Polanyi-Semenov rule. Oxidative dehydrogenation of ethane is studied on Cd-containing zeolites. CH₄, C₂H₆ and C₃H₈ oxidative dehydrogenation by O₂ or CO₂ is studied on a MNO/SiO₂ catalyst. The initiation of radical reactions of hydrocarbons on Cl-containing catalysts proceeds via chlorine atoms generation.