时变网络中国邮路问题的时间自动机模型

基于时间自动机理论,提出了时间窗、时间依赖服务代价以及时间依赖旅行时间这3类时变网络中国邮路问题的统一建模的语义模型和求解方法.首先,将中国邮路问题可行解条件和时变参数与时间自动机联系起来,建立了3类问题的统一时间自动机系统(timed automata system,简称TAS)模型;然后,将时变网络中国邮路问题归结为TAS模型上的一系列可达性判定问题,并利用形式化验证算法给出了有效的求解方法.由于TAS模型中存在O(|A|+|AR|+1)个时间自动机,限制了问题求解规模.为此,通过扩展时间自动机语义,提出了TAS模型中的时间自动机合并策略,进而将TAS模型转换为一个广义时间自动机(GTA)模型.基于GTA模型,利用UPPAAL工具对9组、共54个随机算例进行实验.实验结果表明,该方法在求解精度上明显优于运筹学领域的方法.     

时间窗-时间依赖中国邮路问题的图转换算法

研究时间依赖网络上带时间窗的中国邮路问题（TDCPPTW）,该问题是对中国邮路问题的扩展,它考虑了时间因素,在实时软件测试等当前许多具有时间依赖性质的热门问题中更具优势。首先提出了一个新的图转换算法;然后,从理论上证明了该转换算法能够在伪多项式时间内将TDCPPTW转换为相应的广义乡村邮路问题（GRPP）;最后,建立了一个0/1线性整数规划模型用于求解转换后的问题,并对随机生成的12个实例进行了求解实验。     

二层SA/GA算法解决时间依赖中国邮路问题

中国邮路问题是图论中的经典问题,得到了深入研究和广泛应用。近年来,由于计算机网络与通信、智能交通系统等复杂应用领域的需求,研究时间依赖网络中的问题具有更为重要的现实应用意义。首先给出了时间依赖中国邮路问题的定义,然后证明了传统中国邮路问题的定理在时间依赖中国邮路问题中不成立,最后设计了二层SA/GA算法(模拟退火/遗传算法)来解决该问题,对随机产生的实例进行了测试,并根据问题下界对算法结果进行了分析。     

时间依赖的网络中最小时间路径算法

时间依赖的网络与传统网络模型相比更具有现实意义，具有广泛的应用领域，交通网络和通信网络可以抽象为时间依赖的网络模型，当模型中弧的工度是时间依赖的变量，最短路径问题的求解变得非常困难，早期的研究者通过具体的网络实例认识到传统最短路径算法在这种情况下是不正确的，因此给出限制性条件使得传统最短路径算法是有效的。该文从最短路径算法的理论基础入手，从理论上证明了传统最短路径算法，如Dijkstra算法和标号设置算法，在时间依赖的网络上不能有效地求解最短路径问题，并且，在没有任何限制性条件下，给出了时间依赖的网络模型，理论基础，求解最小时间路径的优化条件和SPTDN算法，从理论上证明了SPTDN算法的正确性，算法的实验结果是正确的，最后给出了时间依赖的网络应用实例。     

测试用例自动生成中等式约束处理算法

为了解决测试用例自动生成中等式约束的求解问题,提出一种加入等式处理策略的分支限界搜索算法.首先将线性代数中判定线性方程组是否有解的方法引入分支限界测试用例生成框架之中;然后在已有算法模型的基础上提出集成等式处理分支限界搜索算法,以支持多种变量类型的等式处理;最后将等式约束分为等式无解、等式多解和等式唯一解三大类进行处理,包含了等式约束求解问题的所有情况.实验结果表明,文中算法可以实现对一部分不可达路径的检测,在很大程度上减少测试用例生成的时间并提高覆盖率;对大工程的测试以及同开源约束求解工具Choco的对比实验,也证明了该算法可以提升测试效率.     

道路转向延迟的动态对偶图模型

传统的道路转向延迟对偶图表达法缺乏对交通网络时间依赖特性的考虑,不适合动态路径规划问题的求解。本文将时间因素引入到对偶图中,发展了一种动态对偶图模型,将交通路网表达为动态对偶网络,并为之定义了FIFO(先进先出）条件,推导了满足FIFO条件的动态行程计算方法,设计了时间依赖的标号设定最短路径算法。实验结果表明,利用该对偶图模型和动态对偶网络,能有效表达路网转向延迟,在以出行时间为标准的动态路径规划中,基于动态对偶网络的路径规划结果可节省约16%的出行时间。     

时间依赖网络中国邮路问题

中国邮路问题是图论中的经典问题,得到了深入的研究和广泛应用。近年来,由于计算机网络与通信、智能交通系统等复杂应用领域的需求,时间依赖网络问题的研究具有更为重要的现实应用意义。本文首次提出了时间依赖网络中的中国邮路问题,建立了该问题的整数线性规划模型,并对该模型的上界进行了分析,最后给出了网络应用实例。     

时变网络条件下带时间窗的食品冷链配送定位—运输路径优化问题

为解决食品冷链配送系统优化问题,针对易腐品特性,结合配送网络时变特征进行行程时间分析,根据服务时间窗设计满意度函数,建立时变条件下的仿真模型;采用"预优化阶段+实时优化阶段"两阶段求解策略,利用分解法进行问题分解,设计最小包络聚类分析方法与混合遗传算法求解。仿真计算验证了模型和算法的有效性与研究的实用价值。     

时间依赖网络中非FIFO弧的转化研究

经典最短路算法不能有效地解决时间依赖网络的最短路问题.时间依赖网络中的非FIFO弧的存在是导致经典的最短路算法失效的原因.本文对非FIFO弧的权函数为非连续(存在有限个非连续点)或者离散情况下转化为FIFO弧进行了研究,在允许等待的前提条件下,提出了解决此类问题的方法.建立在经典Dijkstra算法基础上,本文提出了时间依赖网络最短路算法.     

石油传输网络最少增压器问题的回溯与分支限界解法

回溯法和分支限界法是用于解决诸多问题的重要而有效的方法。本文首先提出石油传输网络中的最少增压器问题,然后介绍了基于回溯法和分支限界法的两种有效算法,最后对这两种算法进行了比较和讨论。实验结果验证了算法的有效性。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。