Synthesis of well-defined poly(styrene)-b-poly(p-tert-butoxystyrene) multiblock copolymer from poly(alkoxyamine) macroinitiator

The stepwise insertion reaction of styrene (St) and p-tert-butoxystyrene (BOSt) into poly(alkoxyamine) macroinitiator was carried out to provide well-defined poly(St)-b-poly(BOSt) multiblock copolymers. Structural confirmation of the multiblock copolymers was accomplished by NMR and IR measurements. The model reaction also supported that the monomer insertion into the macroinitiator proceeded in accordance with a living fashion.     

Synthesis and characterization of poly(ethylene glycol)-b-poly (l-lactide)-b-poly(l-glutamic acid) triblock copolymer

A biodegradable amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-glutamic acid) (PEG-b-PLLA-b-PLGA) was obtained by catalytic hydrogenation of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(γ-benzyl-l-glutamic acid) (PEG-b-PLLA-b-PBLGA) synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with amino-terminated MPEG-b-PLLA-NH₂ as a macroinitiator. MPEG-b-PLLA-NH₂ converted from MPEG-b-PLLA-OH first reacted with tert-Butoxycarbonyl-l-phenylalanine (Phe-^NBOC) and dicyclohexylcarbodiimide (DCC) and then deprotected the tert-butoxycarbonyl group. MPEG-b-PLLA-OH was prepared by ROP of l-lactide with monomethoxy poly(ethylene glycol) in the presence of stannous octoate. The triblock copolymer and its diblock precursors were characterized by ¹H NMR, FTIR, GPC and DSA (drop shape analysis) measurements. The lengths of each block polymers could be tailored by molecular design and the ratios of feeding monomers. The triblock polymer PEG-b-PLLA-b-PLGA containing carboxyl groups showed obviously improved hydrophilic properties and could be a good potential candidate as a drug delivery carrier.     

Radical polymerization of butyl acrylate and random copolymerization of styrene and butyl acrylate and styrene and methyl methacrylate mediated by monospiro- and dispiropiperidinyl-N-oxyl radicals

Radical polymerization of butyl acrylate (BA) and random copolymerizations of styrene (St) and BA and St and methyl methacrylate (MMA) in the presence of 7-aza-15-hydroxydispiro[5.1.5.3]hexadecane-7-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxyspiro[5.6]dodecane-1-yloxyl (2) were carried out. Radical polymerization of BA at 120 °C in the presence of 1 gave poly(BA) with M_n=20200 and M_w/M_n=1.30 at 23% conversion. The termination of polymerization observed around ∼20% conversion was solved to a certain extent by an addition of small amounts of dicumyl peroxide, and poly(BA) with M_n=37400 and M_w/M_n=1.33 was obtained in 46% yield. Random copolymerizations of St and BA and St and MMA in the presence of 1 and 2 at 80 °C gave the corresponding random copolymers with narrow polydispersities of 1.12-1.38 at the molar fraction above 0.30 of St in feed. The kinetic study for the NO-C bond homolysis of the corresponding alkoxyamines prepared from 1 and 2 were carried out, and evaluation of the preexponential factors (A_act) and the activation parameters (E_act) showed that the steric factors of the nitroxides are reflected mainly on E_act.     

Synthesis of hydroxyphenylglycine-derived novel poly(silylenevinylenephenyleneethynylene)s

The hydrosilylation polymerization of d-(−)-p-hydroxyphenylglycine-derived diethynyl monomers 1p and 1m with dihydrosilanes Si1 and Si2 was carried out using RhI(PPh₃)₃ as a catalyst to give optically active novel poly(silylenevinylenephenyleneethynylene)s [(E)-poly(1p-Si1), (E)-poly(1p-Si2), (E)-poly(1m-Si1), (E)-poly(1m-Si2), and (Z)-poly(1p-Si1)] with number-average molecular weights ranging from 2800 to 17,000 in 41-92% yields. Polymers having (E)- and (Z)-olefin moieties were obtained, wherein the (E)-/(Z)-ratios depended on the reaction conditions. The UV-vis absorption edge of (E)-poly(1p-Si1) was positioned at a wavelength longer than that of (Z)-poly(1p-Si1), indicating that (E)-vinylene-linkage extends the conjugation more largely than the (Z)-counterpart. This was also confirmed by fluorescence spectroscopy. Alkaline hydrolysis of ester moieties of these polymers gave the corresponding polymers having carboxy groups. The (E)-polymers showed different solubility in hydrophobic solvents before and after hydrolysis, but the non-hydrolyzed and hydrolyzed (Z)-polymers exhibited the same solubility.     

Dispersion polymerization of 2-hydroxyethyl methacrylate stabilized by a hydrophilic/CO2-philic poly(ethylene oxide)-b-poly(1,1,2,2-tetrahydroperfluorodecyl acrylate) (PEO-b-PFDA) diblock copolymer in supercritical carbon dioxide

Dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) has been successfully performed in supercritical carbon dioxide at P=370 bar and T=65 °C with azobis(isobutyronitrile) as initiator and a hydrophilic/CO₂-philic poly(ethylene oxide)-b-poly(1,1,2,2-tetrahydroperfluorodecyl acrylate) (PEO-b-PFDA) block copolymer as steric stabilizer. The PEO-b-PFDA (2K/21K) block copolymer was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Spherical particles of poly(HEMA) were obtained in the range of 200-400 nm diameter size with a narrow particle size distribution (D_w/D_n<1.1). The effect of the stabilizer concentration on the dispersion polymerization was investigated from 20 w/w% down to 3.5 w/w% versus HEMA. Precipitation polymerization in the absence of stabilizer lead to the formation of large aggregates of partially coalesced particles whereas discrete spherical particles of poly(HEMA) were obtained by dispersion polymerization even at low concentration of PEO-b-PFDA (3.5 w/w% versus HEMA).     

Living radical polymerization of styrene mediated by a piperidinyl-N-oxyl radical having very bulky substituents

A new cyclic nitroxide 1 and the corresponding alkoxyamines 9 and 10 were synthesized and the polymerization of styrene (St) initiated with 10 was investigated. The NO-C bond of 9 is very weak, cleaving at room temperature. On the other hand, alkoxyamine 10 is stable at room temperature and the A_act and E_act for the NO-C bond homolysis were determined to be 1.4 × 10¹⁵ s⁻¹ and 124.5 kJ mol⁻¹, respectively. When the polymerization of St was carried out at 70 °C, the resultant poly(St) showed narrow polydispersities below 1.25. In the polymerization at 90 °C, the resulting poly(St) showed narrow polydispersity until 60% conversion, but M_w/M_n was rapidly increased above 60% conversion. On the other hand, the polymerization at 120 °C gave poly(St) with broad polydispersities. The unusual polymerization behavior was discussed on the basis of the SEC and ESR results.     

Synthesis and properties of various poly(diphenylacetylenes) containing tert-amine moieties

The polymerization of diphenylacetylene derivatives possessing tert-amine moieties, such as triphenylamine, N-substituted carbazole and indole, was examined in the presence of TaCl₅-n-Bu₄Sn (1:2) catalyst. A polymer with high molecular weight (M_w = 570 × 10³) was obtained in good yield by the polymerization of diphenylamine-containing monomer 1b, whereas the isopropylphenylamine derivative (1c) gave a polymer with relatively low molecular weight (M_w = 2.4 × 10³). The polymerization of monomer 1d containing cyclohexylphenylamine group did not proceed; however, carbazolyl- and indolyl-containing monomers also produced polymers. Poly(1b), poly(2f) and poly(4b) could be fabricated into free-standing membranes by casting toluene solutions of these polymers. The gas permeability of poly(1b) was too low to be evaluated accurately whereas poly(4b) possessing two chlorine atoms in the repeating unit showed higher gas permeability than that of poly(1b); furthermore, poly(2f) having trimethylsilyl and 3-methylindolyl groups exhibited relatively high gas permeability (). In the cyclic voltammograms of diphenylamino group-containing polymers, poly(1b) and poly(2b), the intensities of oxidation and reduction peaks decreased more than those of carbazolyl-containing poly(2a). The molar absorptivity (?) of poly(1b) at ∼700 nm increased with increasing applied voltage in the UV-vis spectrum.     

Synthesis and characterization of azobenzene-functionalized poly(styrene)-b-poly(vinyl acetate) via the combination of RAFT and “click” chemistry

Here, we described a strategy for preparing well-defined block copolymers, poly(styrene)-b-poly(vinyl acetate) (PS-b-PVAc), containing middle azobenzene moiety via the combination of the reversible addition-fragmentation chain transfer (RAFT) polymerization and “click” chemistry. Firstly, a novel RAFT agent containing α-alkyne and azobenzene chromophore in R group, 2-(3-ethynylphenylazophenoxycarbonyl)prop-2-yl-9H-carbazole-9-carbodithioate (EACDT), was synthesized and used to mediate the RAFT polymerization of styrene (St). Well-defined α-alkyne end-functionalized poly(styrene) (PS) was obtained. Secondly, the RAFT polymerization of vinyl acetate (VAc) was conducted using functionalized RAFT reagent with ω-azide structure in Z group, O-(2-azidoethyl) S-benzyl dithiocarbonate (AEBDC). Well-defined ω-azide end-functionalized poly(vinyl acetate) (PVAc) was obtained. Afterwards, the resulting α-alkyne terminated PS was coupled by “click” chemistry with the azide terminated PVAc. The block copolymer, PS-b-PVAc, was obtained with tailored structures. The products from each step were characterized and confirmed by GPC, ¹H NMR, IR and differential scanning calorimetry (DSC) examination. Kinetics of the trans-cis-trans isomerization from azobenzene chromophore in PS-b-PVAc and PS were investigated in CHCl₃ solutions.     

‘Living’ radical polymerization of styrene mediated by spiro ring-substituted piperidinyl-N-oxyl radicals. The effect of the spiro rings on the control of polymerization

The bulk radical polymerizations of styrene (St) at 80-120 °C in the presence of 6-aza-7,7-dimethyl-9-hydroxyspiro[4.5]decane-6-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxy[5.5]undecane-1-yloxyl (2) were studied. At 100 and 120 °C, the polymerizations were well controlled by those nitroxides to give poly(St)s with narrow polydispersities. On the other hand, the polymerization mediated by 2 at 80 °C showed a good ‘livingness’ of polymerization, but 1 had a poor ability to control the polymerization to give poly(St) with a broad polydispersity of 1.52. The rate constants (k_act) for the homolysis of the NO-C bond of the alkoxyamines prepared from 1 and 2 were measured at 333-373 K, and the A_acts and E_acts values were determined to be 2.8×10¹³ s⁻¹ and 128 kJ mol⁻¹ (1) and 4.0×10¹³ s⁻¹ and 125 kJ mol⁻¹ (2), respectively, from the Arrhenius plots. These results are compared with those for the structurally related piperidinyl-N-yloxyl radicals including TEMPO.     

Synthesis of densely grafted copolymers by nitroxide-mediated radical polymerization of styrene using poly(phenylacetylene)s as a macroinitiator

Poly(phenylacetylene)s carrying alkoxyamine moieties in the side chain were prepared by Rh-catalyzed homopolymerization of 1-(4-ethynylphenyl)-1-(2,2,6,6-tetramethyl-1-piperidinyloxyl)ethane (1) and random copolymerization of 1 and 4-methoxy-1-ethynylbenzene (2a) or 4-decyloxy-1-ethynylbenzene (2b). ¹H NMR spectra showed that the poly(phenylacetylene)s adopted a cis-transoid structure. Using the poly(phenylacetylene)s as the macroinitiator the nitroxide-mediated radical polymerization of styrene (St) was carried out at 120 °C to yield densely grafted copolymers as a light yellow powder. The side chain lengths of the graft copolymers were determined by both ¹H NMR and conversion of St, which agreed with each other. The SEC profiles of the graft copolymers were unimodal at low conversions but were not unimodal at high conversion: a shoulder was observed in the high molecular=weight region and a small peak was observed in the low molecular=weight region. ¹H NMR measurements of the graft copolymers indicated that the copolymers adopted a trans-transoid structure, revealing that isomerization from cis-transoid to trans-transoid forms took place during the polymerization of St at 120 °C.     

Thermoresponsive core-shell-corona micelles of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene

Core-shell-corona micelles with a thermoresponsive shell self-assembled by triblock copolymer of poly(ethyleneglycol)-b-poly(N-isopropylacrylamide)-b-polystyrene (PEG₄₅-b-PNIPAM₁₆₈-b-PS₄₆) are studied by ¹H NMR, light scattering and atomic force microscopy. The thermoresponsive triblock copolymer, which has a relatively short hydrophobic PS block, can disperse in water at room temperature to form core-shell-corona micelles with the hydrophobic PS block as core, the thermoresponsive PNIPAM block as shell and the hydrophilic PEG block as corona. At temperature above lower critical solution temperature (LCST) of the PNIPAM block, the PNIPAM chains gradually collapse on the PS core to shrink the size and change the structure of the resultant core-shell-corona micelles with temperature increasing. It is found that there possibly exists an interface between the PNIPAM shell and PEG corona of the core-shell-corona micelles at temperature above LCST of the PNIPAM block.     

Synthesis of amphiphilic triblock copolymer of polystyrene and poly(4-vinylbenzyl glucoside) via TEMPO-mediated living radical polymerization

4-Vinylbenzyl glucoside peracetate 1 was polymerized with α,α′-bis(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)-1,4-diethylbenzene 2 in chlorobenzene using (1S)-(+)-10-camphorsulfonic acid anhydrous (CSA) as an accelerator ([1]=0.4 M,[1]/[2]/[CSA]=75/1/1.3) at 125 °C for 5 h. The polymerization afforded poly(4-vinylbenzyl glucoside peracetate) having TEMPO moieties on both sides of the chain ends, 3, with a molecular weight (M_w,SLS) of 8500, a polydispersity index (M_w/M_n) of 1.09, and an average degree of polymerization of the 1 unit (x) of 17. Styrene (St) was polymerized with 3 in chlorobenzene at 125 °C (St/chlorobenzene=1/2, w/w). The polymerization successfully afforded polystyrene-poly(4-vinyl glucoside peracetate)-polystyrene, 4, when the polymerization time was below about 2 h. Polymer 4 with the M_w,SLS of 12,500, 17,900, and 29,400, the compositions (y-x-y) of 20-17-20, 45-17-45, and 100-17-100, and the M_w/M_n of 1.12, 1.14 and 1.17 were modified by deacetylation using sodium methoxide in dry-THF into polystyrene-poly(4-vinyl glucoside peracetate)-polystyrene, 5. The solubility of polymer 5 was examined using a good solvent for polystyrene such as toluene and for the saccharide such as H₂O.     

Physical properties of poly(cyclohexyl methacrylate)-b-poly(iso-butyl acrylate)-b-poly(cyclohexyl methacrylate) triblock copolymers synthesized by controlled radical polymerization

The microphase segregation of different poly(cyclohexyl methacrylate)-b-poly(iso-butyl acrylate)-b-poly(cyclohexyl methacrylate), PCH-b-PiBA-b-PCH, triblock copolymers obtained by atom transfer radical polymerization has been evaluated by dynamic mechanical thermal analysis through location of the two relaxations ascribed to cooperative motions of each block. Additionally, other secondary relaxations have been found, whose characteristics are also dependent on molecular weight of outer and rigid segments. The length of these hard blocks influences significantly the stiffness and microhardness found in these triblock copolymers. These two mechanical parameters increase as molecular weight of poly(cyclohexyl methacrylate) does. The morphological aspects have been examined by small angle X-ray scattering and atomic force microscopy.     

Functionalization of amphiphilic coil-rod-coil triblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine) with florescence moiety and C60

We recently achieved quantitative synthesis of an amphiphilic coil-rod-coil triblock copolymer, poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine), by coupling in situ living diblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate) (P2VP-b-PHIC) using malonyl chloride in the presence of pyridine. This led to the introduction of an active methylene group that is a site for further functionalization in the rod block. The Michael addition reaction of the triblock copolymer with 7-(4-trifluoromethyl) coumarin acrylamide led to copolymer bearing a fluorescent pendent in the rod block. The fluorescent labeled copolymers were isolated in ∼94% yields. Similarly C₆₀ pendent was introduced to the rod block by the Bingel reaction. The yields of C₆₀ functionalized copolymers were ∼54%. The precursor and functionalized amphiphilic coil-rod-coil copolymer show diverse morphologies, such as micelles and vesicles by simply changing the solvent. For the C₆₀ functionalized block copolymer, structural constraints in micelles and vesicles prevented C₆₀ pendents to aggregate.     

Syntheses of AB2 3- and AB4 5-miktoarm star copolymers by combination of the anionic ring-opening polymerization of hexamethylcyclotrisiloxane and nitroxide-mediated radical polymerization of styrene

AB₂ 3- and AB₄ 5-miktoarm star copolymers were prepared by combination of the anionic ring-opening polymerization (AROP) of hexamethylcyclotrisiloxane (D₃) and the TEMPO-mediated radical polymerization of styrene (St). Initially, two kinds of dendritic multifunctional initiators were prepared. One has a 4-bromobutoxy group and two TEMPO-based alkoxyamines and the other has a 4-bromobutoxy group and four TEMPO-based alkoxyamines. Treatment of the multifunctional initiators with tert-butyllithium gave the corresponding lithiobutoxy derivatives, and AROP of D₃ by the lithiobutoxy derivatives gave poly(D₃) with M_w/M_n of 1.07-1.12. Nitroxide-mediated radical polymerization of St by the poly(D₃)s at 120 °C gave AB₂ 3- and AB₄ 5-miktoarm star copolymers with M_w/M_n of 1.15-1.28. Their structures were analyzed by means of ¹H NMR and SEC measurements.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Synthesis of amphiphilic triblock copolymers and application for morphology control of calcium carbonate crystals

A series of amphiphilic triblock copolymers poly(ethylene glycol)-block-poly(acrylic acid)-block-poly(n-butyl acrylate) (PEG-b-PAA-b-PnBA) differing only in the relative block lengths were synthesized by the acid-catalyzed elimination of the tert-butyl groups from poly(ethylene glycol)-block-poly(tert-butyl acrylate)-block-poly(n-butyl acrylate) (PEG-b-PtBA-b-PnBA), which was synthesized by atom-transfer radical polymerization (ATRP). The degree of polymerization, molecular weight and percentage of hydrolysis of the product PEG-b-PAA-b-PnBA were studied by gel permeation chromatography (GPC), NMR and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF-MS). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the aggregation states of copolymers in water solution. The radii of the copolymer micelles shrink as Ca²⁺ is introduced into the solutions. The crystallization behaviors of calcium carbonate controlled by copolymer 1 (PEG₁₁₂-b-PAA₈₆-b-PnBA₆₀) and copolymer 2 (PEG₁₁₂-b-PAA₄₀-b-PnBA₇₂) differing mainly in the length of PAA block were systematically studied. It was found that the crystallization products are composed of calcite and vaterite, and the ratio of vaterite to calcite increases with increasing the concentration of copolymer 1. For copolymer 2, however, only calcite is obtained at all the concentration range investigated in this work.     

Synthesis and properties of optically active substituted polyacetylenes having carboxyl and/or amino groups

Polyacetylenes having carboxyl and/or amino groups in the side chain were synthesized by the polymerization of N-(2-propynyloxycarbonyl)-l-alanine (1) and l-alanine N-propargylamide (2) catalyzed with a rhodium cation complex. Poly(1_0.5-co-2_0.5) exhibited a larger CD signal than the homopolymers. The polymer mixtures obtained by the polymerization of 1 in the presence of poly(2), and those obtained by the polymerization of 2 in the presence of poly(1) showed specific rotations larger than calculated. The polymerization of propargylamine in the presence of poly(1) did not exhibit significant effect, while the polymer mixtures obtained by the polymerization of propiolic acid in the presence of poly(2) exhibited [α]_D of positive sign, although poly(2) alone exhibited [α]_D of negative sign.     

Synthesis and properties of ornithine- and lysine-based poly(N-propargylamides). Responsiveness of the helical structure to acids

Ornithine- and lysine-based novel N-propargylamides, N-α-tert-butoxycarbonyl-N-δ-fluorenylmethoxycarbonyl-l-ornithine-N′-propargylamide (1), N-α-tert-butoxycarbonyl-N-?-fluorenylmethoxycarbonyl-l-lysine-N′-propargylamide (2), N-α-fluorenylmethoxycarbonyl-N-δ-tert-butoxycarbonyl-l-ornithine-N′-propargylamide (3), and N-α-fluorenylmethoxycarbonyl-N-?-tert-butoxycarbonyl-l-lysine-N′-propargylamide (4) were synthesized and polymerized with a rhodium catalyst. Polymers with moderate molecular weights were obtained in good yields. Poly(1)-poly(4) showed strong Cotton effects in THF, whose sign and wavelength depended on the substituents. They were satisfactorily converted into the corresponding polymers [poly(1a)-poly(4a)] with free amino groups. Poly(1a) and poly(2a) also formed a helix, while poly(3a) and poly(4a) did not. Poly(1a) and poly(2a) decreased the CD intensity by the addition of m- and o-phthalic acids.     

Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

The synthesis of ABC triblock copolymer poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene (PEO-b-PMMA-b-PS) via atom transfer radical polymerization (ATRP) is reported. First, a PEO-Br macroinitiator was synthesized by esterification of PEO with 2-bromoisobutyryl bromide, which was subsequently used in the preparation of halo-terminated poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) diblock copolymers under ATRP conditions. Then PEO-b-PMMA-b-PS triblock copolymer was synthesized by ATRP of styrene using PEO-b-PMMA as a macroinitiator. The structures and molecular characteristics of the PEO-b-PMMA-b-PS triblock copolymers were studied by FT-IR, GPC and ¹H NMR.