Synthesis of amphiphilic ethyl cellulose grafting poly(acrylic acid) copolymers and their self-assembly morphologies in water

Amphiphilic ethyl cellulose (EC)-g-poly(acrylic acid) (PAA) copolymers were synthesized by atom transfer radical polymerization (ATRP). Firstly, ethyl cellulose macro-initiators with the degree of the 2-bromoisobutyryl substitution of 0.04 and 0.25 synthesized by the esterification of the hydroxyl groups remained in EC macromolecular chains and the 2-bromoisobutyryl bromides. Secondly, tert-butyl acrylate was polymerized by ATRP with the ethyl cellulose macro-initiator and EC-g-PtBA copolymers were prepared. Finally, the EC-g-PAA copolymers were prepared by hydrolyzing tert-butyl group of the EC-g-PtBA copolymers. The grafting copolymers were characterized by means of GPC, ¹H NMR and FTIR spectroscopies. The molecular weight of graft copolymers increased during the polymerization and the polydispersity was low. A kinetic study showed that the polymerization was first-order. Meanwhile, EC-g-PAA copolymers were self-assembled to micelles or particles with diameters of 5 nm and 100 nm in water (pH = 10) when the concentration was 1.0 mg/ml.     

Comparison of thermomechanical properties of statistical, gradient and block copolymers of isobornyl acrylate and n-butyl acrylate with various acrylate homopolymers

Well-defined statistical, gradient and block copolymers consisting of isobornyl acrylate (IBA) and n-butyl acrylate (nBA) were synthesized via atom transfer radical polymerization (ATRP). To investigate structure-property correlation, copolymers were prepared with systematically varied molecular weights and compositions. Thermomechanical properties of synthesized materials were analyzed via differential scanning calorimetry (DSC), dynamic mechanical analyses (DMA) and small-angle X-ray scattering (SAXS). Glass transition temperature (T_g) of the resulting statistical poly(isobornyl acrylate-co-n-butyl acrylate) (P(IBA-co-nBA)) copolymers was tuned by changing the monomer feed. This way, it was possible to generate materials which can mimic thermal behavior of several homopolymers, such as poly(t-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA), poly(ethyl acrylate) (PEA) and poly(n-propyl acrylate) (PPA). Although statistical copolymers had the same thermal properties as their homopolymer equivalents, DMA measurements revealed that they are much softer materials. While statistical copolymers showed a single T_g, block copolymers showed two T_gs and DSC thermogram for the gradient copolymer indicated a single, but very broad, glass transition. The mechanical properties of block and gradient copolymers were compared to the statistical copolymers with the same IBA/nBA composition.     

Molecular brushes with extreme grafted side chain densities

A series of densely grafted poly(n-butyl acrylate) (PBA) molecular brushes with four different grafting densities were synthesized by the “grafting-from” approach using atom transfer radical polymerization (ATRP). A novel monomer, isopropylidene-2,2-Bis(methoxy)propionic hydroxyethylmethacrylate (IMPHMA), was synthesized and copolymerized with methyl methacrylate (MMA) under different monomer feed ratios to yield a series of linear poly(methyl methacrylate-stat-IMAPA), [PMMA-s-(PIMPHMA)]. The resulting copolymers were deprotected and transformed to macroinitiators, [PMMA-s-(PHEMA-IMPHMA-Br)]. n-Butyl acrylate (BA) was grafted from these macroinitiators to yield a series of molecular brushes, [PMMA-s-{(PIMPHMA)-g-PBA}], with various side chain lengths. Molecular brushes were characterized by gel permeation chromatography (GPC) and ¹H NMR. PBA side chains were cleaved by acid hydrolysis, and the resulting linear PBA polymers were characterized by GPC to study initiation efficiency during the synthesis of molecular brushes. The initiation efficiency increased with polymerization time and decreased with macroinitiators that had more initiation sites. Atomic force microscopy (AFM) measurements demonstrated the characteristic molecular structure by resolving individual brush molecules.     

Double-responsive core-shell-corona micelles from self-assembly of diblock copolymer of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide)

Self-assembly of poly(t-butyl acrylate-co-acrylic acid)-b-poly(N-isopropylacrylamide) [P(tBA-co-AA)-b-PNIPAM], which was obtained from part hydrolysis of PtBA-b-PNIPAM synthesized by sequential atom transfer radical polymerization (ATRP) was studied. Thermo- and pH-responsive core-shell-corona (CSC) micelles with different structures were formed from (PtBA-co-PAA)-b-PNIPAM in aqueous solution. At pH 5.8 and 25 °C, the block copolymer self-assembled into spherical core-shell micelles with hydrophobic PtBA segments as the core, hydrophilic PAA/PNIPAM segments as the mixed shell. Increasing temperatures, core-shell micelles converted into CSC micelles with PtBA as the core, collapsed PNIPAM as the shell and soluble PAA as the corona. Moreover, decreasing pH at 25 °C, PAA chains collapsed onto the core resulting in CSC micelles with PtBA as the core, PAA as the shell and PNIPAM as the corona.     

Growth of silver nanoparticles on poly(acrylic acid) brushes and their properties

A simple procedure is employed for the growth of silver nanoparticles (Ag NPs) onto the silicon substrate modified by poly(acrylic acid) (PAA) brushes, via: (1) surface-initiated ATRP of tert-butyl acrylate on Si surface to the preparation of poly(tert-butyl acrylate) brushes, (2) acid hydrolysis of PBA to the formation of PAA, and (3) in situ synthesis of Ag NPs via chemical reduction of AgNO₃ in the presence of PAA brushes. The polymer brushes are thoroughly characterized. Moreover, Ag nanoparticles are homogeneously immobilized into the brush layer and have been used to fabricate a sensor platform of surface-enhance Raman scattering for the detection of organic molecules and effectively catalyze the reduction of methylene blue by NaBH₄.     

Polyisobutylene-based miktoarm star polymers via a combination of carbocationic and atom transfer radical polymerizations

Poly(isobutylene-b-styrene) (PIB-PS) copolymers and polyisobutylene (PIB) homopolymers were synthesized via quasiliving carbocationic polymerization from the initiator 3,3,5-trimethyl-5-chlorohexyl acetate, which contains a protected hydroxyl group. The PIB block was created at −70 °C in a methylcyclohexane/methyl chloride (60:40) cosolvent system, using TiCl₄ as co-initiator, followed optionally by sequential addition of styrene. Using a strong base, the acetate head group of the resulting block copolymer was cleaved to yield a hydroxyl group, which was subsequently esterified with the branching agent 2,2-bis((2-bromo-2-methyl)propionatomethyl)propionyl chloride (BPPC) to create dual initiating sites for atom transfer radical polymerization (ATRP). ATRP of tert-butyl acrylate was carried out using a Cu(I)Br/1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) catalyst system. In some cases, the ester side chains of the poly(tert-butyl acrylate) (PtBA) blocks were cleaved to create poly(acrylic acid) (PAA) blocks. The final miktoarm star polymers had compositions that were very close to theoretical.     

Synthesis of amphiphilic triblock copolymers and application for morphology control of calcium carbonate crystals

A series of amphiphilic triblock copolymers poly(ethylene glycol)-block-poly(acrylic acid)-block-poly(n-butyl acrylate) (PEG-b-PAA-b-PnBA) differing only in the relative block lengths were synthesized by the acid-catalyzed elimination of the tert-butyl groups from poly(ethylene glycol)-block-poly(tert-butyl acrylate)-block-poly(n-butyl acrylate) (PEG-b-PtBA-b-PnBA), which was synthesized by atom-transfer radical polymerization (ATRP). The degree of polymerization, molecular weight and percentage of hydrolysis of the product PEG-b-PAA-b-PnBA were studied by gel permeation chromatography (GPC), NMR and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF-MS). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the aggregation states of copolymers in water solution. The radii of the copolymer micelles shrink as Ca²⁺ is introduced into the solutions. The crystallization behaviors of calcium carbonate controlled by copolymer 1 (PEG₁₁₂-b-PAA₈₆-b-PnBA₆₀) and copolymer 2 (PEG₁₁₂-b-PAA₄₀-b-PnBA₇₂) differing mainly in the length of PAA block were systematically studied. It was found that the crystallization products are composed of calcite and vaterite, and the ratio of vaterite to calcite increases with increasing the concentration of copolymer 1. For copolymer 2, however, only calcite is obtained at all the concentration range investigated in this work.     

Modification of Silica Nanoparticles with Miktoarm Polymer Brushes via ATRP

Silica nanoparticles were successfully modified with miktoarm brushes via atom transfer radical polymerization (ATRP) using three different approaches. In the first approach: “graft onto and from”, a poly(tert-butyl acrylate) (PtBA) macroinitiator was grafted onto the surface of a monomer-modified silica nanoparticle. Then, polystyrene (PSt) brush was grafted from the surface-tethered reactive chain end. In the second approach: “two-step reverse ATRP”, the PtBA and poly(n-butyl acrylate) (PBA) brushes were consecutively grafted from initiator-modified silica particles via ATRP. The polymerization was initiated from the silica surface via a two-step controlled thermal decomposition of surface-tethered diazo initiator moieties. In the third method: “diblock first”, a diblock copolymer of poly(tert-butyl acrylate) and poly(glycidyl methacrylate) (PtBA-b-PGMA) was grafted onto amine-modified silica particles. The diblock copolymer was covalently attached to the silica surface via interaction between surface-tethered amine groups and the short reactive block containing glycidyl groups. Next, the polystyrene brushes were grafted from surface-tethered reactive chain end. The materials prepared by three different approaches were characterized using gel permeation chromatography (GPC) and thermogravimetric analysis (TGA). The PtBA brushes were hydrolyzed under acidic conditions to form poly(acrylic acid) (PAA) brushes. The resulting materials were imaged using atomic force microscopy (AFM) and transmission electron microscopy (TEM).     

Synthesis and characterization of amphiphilic graft copolymer poly(ethylene oxide)-graft-poly(methyl acrylate)

A novel well-defined amphiphilic graft copolymer of poly(ethylene oxide) as main chain and poly(methyl acrylate) as graft chains is successfully prepared by combination of anionic copolymerization with atom transfer radical polymerization (ATRP). The glycidol is protected by ethyl vinyl ether first, then obtained 2,3-epoxypropyl-1-ethoxyethyl ether (EPEE) is copolymerized with EO by initiation of mixture of diphenylmethyl potassium and triethylene glycol to give the well-defined poly(EO-co-EPEE), the latter is deprotected in the acidic conditions, then the recovered copolymer [(poly(EO-co-Gly)] with multi-pending hydroxyls is esterified with 2-bromoisobutyryl bromide to produce the ATRP macroinitiator with multi-pending activated bromides [poly(EO-co-Gly)_(ATRP)] to initiate the polymerization of methyl acrylate (MA). The object products and intermediates are characterized by NMR, MALDI-TOF-MS, FT-IR, and SEC in detail. In solution polymerization, the molecular weight distribution of the graft copolymers is rather narrow (M_w/M_n < 1.2), and the linear dependence of Ln [M₀]/[M] on time demonstrates that the MA polymerization is well controlled.     

Polymer-grafted Al2O3-nanoparticles for controlled dispersion in poly(ethylene-co-butyl acrylate) nanocomposites

We report a model system to control the dispersion and inter-particle distance of polymer-grafted Al₂O₃-nanoparticles in high molecular weight poly(ethylene-co-butyl acrylate). The proposed methods make it possible to extend the use of surface initiated atom transfer radical polymerization (SI-ATRP) in combination with more commercial grades of silanes and particles, showing the versatility of this polymerization process. The nanoparticles were surface-modified by an amine-terminated silane, forming multilayered silane coatings to which moieties capable of initiating ATRP were attached. Subsequently, “short” (DP: 117) and “long” (DP: 265) chains of poly(n-butyl acrylate) were grafted from the particles via SI-ATRP. The graft density was found to be in accordance with the density of the accessible amine groups and could therefore be assessed directly after the initial silanization step using UV–Vis spectrometry. From AFM micrographs, the grafted nanoparticles were found to be well-dispersed in the matrix. This observation was corroborated by a novel simulation method capable of transforming the inter-particle distances from 2D to 3D, for the closest and more distant neighbors. Further, we calculated the deviation ratios and concluded that the dispersions were homogeneous and that the inter-particle distances were related to the graft length. The homogeneous dispersions were explained by dominating enthalpic contributions of the polymer grafts to the nanocomposites in combination with shielding of the nanoparticle core–core attraction by the silane multilayer (similar to bimodal systems).     

pH responsive nanoplates from bulk self-assembly of UV-crosslinkable poly(tert-butyl acrylate)-block-poly(2-cinnamoyloxyethyl methacrylate)

We report the dispersed nanoplates prepared from bulk self-assembly of diblock copolymer poly(tert-butyl acrylate)-block-poly(2-cinnamoyloxyethyl methacrylate) (PtBA-b-PCEMA) with PCEMA as a UV-crosslinkable segment and PtBA as a hydrolysable segment. PtBA-b-P(HEMA-TMS) was synthesized through a two step ATRP and functionalized to PtBA-b-PCEMA. The diblock copolymer with 55.7 % weight ratio of PCEMA bulk was assembled into lamellar morphology and characterized by small-angle X-ray scattering (SAXS). After UV-crosslinking, the dispersed nanoplates were prepared by dispersing the crosslinked bulk self-assembly in a good solvent of the PtBA segment and characterized by transmission electron microscopy (TEM). The dispersed nanoplates have crosslinked PCEMA as the cores and the solubilized PtBA as the coronas. After hydrolysis of the PtBA segment into poly(acrylic acid) (PAA), the crosslinked nanoobjects could be dispersed in water and showed reversible pH-responsibility.     

Synthesis and characterisation of hydroxyl end-capped telechelic polymers with poly(methyl methacrylate)-block-poly(n-butyl acrylate) backbones via atom transfer radical polymerisation

Hydroxyl end-capped telechelic polymers with poly(methyl methacrylate)-block-poly(n-butyl acrylate) (PMMA-b-PBA) backbones have been prepared via atom transfer radical polymerisation (ATRP) together with a nucleophilic substitution reaction. A hydroxyl-functionalised PMMA macroinitiator (HO-PMMA-Br) was prepared via ATRP at the optimised reaction temperature (60 °C) using 2-hydroxyethyl 2-bromoisobutyrate as the initiator. The high functionality of the bromo end group in the macroinitiator was confirmed by both ¹H NMR technique and a chain-extension reaction. Electrospray ionisation mass spectrometer proved to be a valuable tool for characterising PMMAs with a bromo end group (PMMA-Br), which provided signals corresponding to the intact polymers although multiply charged polymer chains were observed. The well-defined block copolymers HO-PMMA-b-PBA-Br were obtained by the ATRP of n-butyl acrylate using HO-PMMA-Br as a macroinitiator in a one-pot reaction at 100 °C. The kinetics as well as the dependence of the M_n,SEC and PDIs of the obtained block copolymers on the conversions of n-butyl acrylate in the chain-extension reaction suggested negligible radical termination during the reaction, demonstrating that the well-defined HO-PMMA-b-PBA-Br with a high functionality of bromo end group were obtained. The nucleophilic substitution reaction of a monohydroxyl-functionalised block copolymer HO-PMMA-b-PBA-Br with 5-amino-1-pentanol in dimethyl sulfoxide at room temperature was verified with ¹H and ¹³C NMR techniques, which resulted in a series of telechelic polymers HO-PMMA-b-PBA-OH with a functionality of hydroxyl groups up to 1.7 according to the gradient polymer elution chromatography.     

Grafting of end-functionalized poly(tert-butyl acrylate) to poly(ethylene-co-acrylic acid) film

Poly(tert-butyl acrylate) (PtBA) was grafted to the surface of poly(ethylene-co-acrylic acid) (EAA) film and the pendant groups of the tethered PtBA were modified to create chemically tailored surface modifying layers. The carboxylic acid groups in the copolymer film served as the grafting sites for the covalent tethering of end-functionalized PtBA. The progression of these reactions was monitored using attenuated total reflectance (ATR)-FTIR and X-ray photoelectron (XPS) spectroscopies along with static contact angle measurements. By controlling the reaction conditions, the chemical functionality of the grafted layer ranged from tert-butyl ester (EAA-g-PtBA) to carboxylic acid (EAA-g-PAA) and was demonstrated by corresponding changes in wettability. The choice of PtBA as the tethered polymer allows for the subsequent substitution of the tert-butyl ester groups. To demonstrate, a novel procedure was used to replace the tert-butyl ester with N,N-dimethylethylenediamine (DMEDA) to form EAA-g-PDMEDA. These reaction schemes can be used to create tunable surface-grafted layers with various pendant group chemistries.     

Synthesis of pH-sensitive micelles from linseed oil using atom transfer radical polymerisation (ATRP)

This paper reports the synthesis of an amphiphilic copolymer from linseed oils and its successive auto-association in water into pH-sensitive micelles. An original ATRP lipoinitiator is first designed from linseed oil in two steps. tert-butyl acrylate (tBA) polymerization is consequently initiated from this original initiator and amphiphilic copolymers are obtained after subsequent acidolysis of the PtBA block into poly(acrylic acid) (PAA). The ability of a lipid-b-PAA copolymer to auto-associate in water is finally investigated through different techniques (Fluorescence, Surface Tension, QELS). This copolymer forms well-defined micelles in acidic media with a low critical micellar concentration (cmc) of 7.6 mg L^?1 and dissociates when the pH is raised above 7.     

Elastomer polymer brushes on flat surface by bimolecular surface-initiated nitroxide mediated polymerization

The method of formation of well-defined polymer brushes based on the nitroxide mediated polymerization (NMP) of n-butyl acrylate (BA) initiated from a self-assembled mono-layers (SAMs) of an azoic initiator in the presence of a stable nitroxide radical is described. After preliminary qualitative characterization by X-ray photoelectron spectroscopy, the samples were studied by ellipsometry in order to determine the dry film thickness (initiator and polymer) and the grafting density of macromolecular chains. It is demonstrated, that in the presence of stable counter radical SG1, acting as chain growth moderator, the surface initiated NMP exhibits a living/controlled character permitting to control architectural parameters (e.g. degree of polymerization) of elastomer grafted polymer chains. The possibility to use the living control character of this type of polymerization to re-initiate grafted chains in order to increase the thickness of an elastomer thin film with conservation of the brushes regime has been demonstrated.     

Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) synthesis and properties

Poly[(2-ethylhexyl acrylate)-ran-(tert-butyl acrylate)]-block-poly(2-cinnamoyloxyethyl acrylate) or P(EXA-r-tBA)-PCEA was synthesized by atom transfer radical polymerization. Reactivity ratios of EXA and tBA for copolymerization were determined. The specific refractive index increments of six diblocks were measured as a function of their composition. The diblocks were thermally stable and formed micelles in an automobile engine oil. Such micelles may be useful as an anti-friction additive in lubricating oils.     

Well-defined poly(methyl methacrylate) grafted to polyethylene with reverse atom transfer radical polymerization initiated by peroxides

A reverse atom transfer radical polymerization (ATRP) with FeCl₃/PPh₃/peroxides was applied to grafting of methyl methacrylate (MMA) to polyethylene (PE). Peroxides on PE were generated by γ-ray irradiation in air. A reverse ATRP of methyl methacrylate with benzoyl peroxide, cumene hydroperoxide, and di-t-butyl peroxide as models of the PE peroxides was confirmed to proceed successfully in living fashion. In an inhomogeneous (bulk) grafting system, the grafting ratio (GR) of PMMA to PE weights, molecular weight (M_n) and its distribution of grafted PMMA were not controlled with time, i.e. the grafting of MMA with a reverse ATRP to the oxidized PE failed in well-defined grafting. On the other hand, a homogeneous (in o-xylene solution) grafting system provided a well-controlled M_n, narrow polydispersity of grafted PMMA and a linear relation between M_n and GR, indicating a controlled grafting. The controlled grafting with a reverse ATRP combined to a radiation-induced grafting was achieved successfully. The grafting of MMA to polypropylene in this way also seemed to be controlled well.     

Self-assembly of pH-responsive and fluorescent comb-like amphiphilic copolymers in aqueous media

“Comb-like” graft copolymers, consisting of a poly((N-vinylcarbazole)-co-(4-vinylbenzyl chloride)) (P(NVK-co-VBC)) copolymer backbone from free radical polymerization and poly(((2-dimethylamino)ethyl methacrylate)-co-(tert-butyl acrylate)) (P(DMAEMA-co-tBA)) side chains from atom transfer radical polymerization (ATRP), were hydrolyzed to produce the acrylic acid (AAc)-containing “comb-like” graft copolymers of P(NVK-co-VBC)-comb-P(DMAEMA-co-AAc). The amphiphilic copolymers possess a fluorescent hydrophobic P(NVK-co-VBC) backbone and pH-sensitive hydrophilic P(DMAEMA-co-AAc) side chains. Arising from acid-base interaction of the hydrophilic side chains, the copolymers can self-assemble into pH-responsive fluorescent and multi-walled hollow vesicles of well-defined morphology in aqueous media. The size and layered wall thickness of the vesicles are also dependent on the length of the copolymer side chains, while the number of wall layers is dependent on the concentration of the vesicles in the aqueous media. In comparison, a N-isopropylacrylamide (NIPAAm)-containing comb-like amphiphilic copolymer (P(NVK-co-VBC)-comb-P(NIPAAm-co-DMAEMA)) of similar structure, albeit with non-interacting hydropholic side chains, self-assembles only into temperature and pH-responsive single-shelled hollow nanoparticles in aqueous media.     

Synthesis of well-defined star polymers and star block copolymers from dendrimer initiators by atom transfer radical polymerization

Novel polyarylether dendrimers with 1,3,5-tri(4-hydroxyphenoxy)benzene core, polybenzylether interior, and benzyl 2-bromoisobutyrate surface group (CMGn-Br, n=1-3, with functionality of 6, 12, and 24, respectively) were prepared by convergent procedure. ATRP of tert-butyl acrylate (tBA) and styrene (St) with CMGn-Br dendrimer initiators in the presence of CuBr/pentamethyldiethylenetriamine catalytic system was investigated in detail, and a series of well-defined dendrimer-like star PtBA and PSt with precise arm numbers were synthesized under suitable conditions. The quantitative initiation of the dendrimer initiators was demonstrated by high initiation efficiency, ¹H NMR spectra, hydrolysis, and MALLS/SEC approach. Star block copolymers comprising PSt and PtBA segments with low polydispersity (1.08<M_w/M_n<1.18) were also successfully synthesized using functional macroinitiators by block copolymerization. In addition, the thermal properties of the resultant polymers were characterized by DSC and TGA.     

Viscoelastic and dielectric studies on comb- and brush-shaped poly(n-butyl acrylate)

The dynamic compliances J′(ω) and J″(ω) and the dielectric permittivities ?′(ω) and ?″(ω) are reported over a wide range of frequency ω and temperature for comb-branched and brush-shaped poly(n-butyl acrylate) prepared by atom transfer radical polymerization. The analysis here of the viscosity η for the comb- and brush-shaped polymers indicates the need to account for an increase of the persistence length with increasing density of the side chains. Enhanced values of J_S are attributed to a dilution effect arising from the side chains on the values that would otherwise arise from the backbone chain. The dielectric loss ?″(ω) demonstrates a deviation from frequency-temperature superposition at a certain range of frequency, with the deviation increasing with increasing density of the side chains. The deviation occurs for a frequency range for which J′(ω) and J″(ω) are approaching their terminal response, but no corresponding deviation from frequency-temperature superposition is noted for these functions. The dielectric behavior in this region is attributed to a δ-relaxation at frequencies lower than the principal α-relaxation, similar to behavior reported for certain polymers with mesogenic side chains.