Cellulose in lithium chloride/N,N-dimethylacetamide, optimisation of a dissolution method using paper substrates and stability of the solutions

Activation and dissolution in lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) of cellulose from paper substrates are studied. The importance of the multiple parameters involved such as salt concentration, sample source and preparation is shown in a literature review. The experiments are carried out in order to perfect the method of activation and dissolution of paper containing different kinds of additives, typically found in historic papers. The suitability and efficiency obtained in the different trials are evaluated. The final procedure involves the activation by solvent exchange, with a water/methanol/DMAc sequence, followed by dissolution in 8% LiCl/DMAc at 4 °C. A study of the stability of the cellulose solutions in the experimental conditions showed that no degradation nor aggregation occurred during the solvation process and even after several months and confirmed the non-aggressiveness of LiCl/DMAc.     

Study on antibacterial O-carboxymethylated chitosan/cellulose blend film from LiCl/N, N-dimethylacetamide solution

Two types of O-carboxymethylated chitosan (O-CMCh)/cellulose polyblends were prepared by mixing cellulose LiCl/N,N-dimethylacetamide (DMAc) solution with O-CMCh aqueous solution (I) or DMAc emulsion (II) and their corresponding films (I and II) were regenerated in water. The (O-CMCh)/cellulose films obtained were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and wide-angle X-ray-scattering (WAXS). FTIR analyses showed that amino groups of O-CMCh were not affected during the film formation. SEM observations indicated that the O-CMCh/cellulose polyblend displayed a heterogeneous microstructure. O-CMCh microdomains dispersed in the cellulose matrix of the blend film. Blend film I showed a better dispersion of the O-CMCh microdomains than blend film II did. DSC and WAXS analyses suggested that, for both two kinds of the blend films, the addition of O-CMCh did not significantly influence the crystallinity and thermal properties of cellulose. The antibacterial activity of the films against Escherichia coli (E. coli) was also measured via optical density method. Both blend films I and II exhibited satisfying antibacterial activity against E. coli, even the O-CMCh concentration was only 2 wt%. Due to the coagulation effect of water on the polyblend, O-CMCh water solution is suitable for the preparation of the blend film with low O-CMCh concentration, while O-CMCh DMAc emulsion should be selected when high O-CMCh concentration is needed.     

Phase diagram of a cellulose solvent: N-methylmorpholine-N-oxide-water mixtures

The phase diagram of the N-methylmorpholine-N-oxide-H₂O mixtures from 0 to 100% has been determined. Three crystalline hydrates have been identified, the already known monohydrate, a dihydrate and a hydrate composed of 8 water molecules per NMMO. The melting temperature of the 8H₂O-NMMO hydrate is −47 °C with a melting enthalpy of about 80 J/g. The region between 25 and 55% of water does not show any crystallisation, but a glass transition around −60 to −100 °C.     

On the conformation of the cellulose solvent N-methylmorpholine-N-oxide (NMMO) in solution

The N-oxide group of the cellulose solvent N-methylmorpholine-N-oxide showed a strong preference for the axial position compared with N-methyl as determined by NMR experiments and computational studies. In solvents with negligible solvent-solute interaction, about 95% of the NMMO molecules obtained a typical chair conformation with an axial N-O (1) while 5% had an equatorial N-O (2) at room temperature (25 °C). Other conformations (boat and twist) are energetically largely disfavored. N-Benzylmorpholine-N-oxide was prepared as reference compound possessing 100% axial N-O. Aprotic solvents of increasing polarity slightly shifted the conformation equilibrium towards the more polar conformer 2. The effect of protic solvents, capable of forming H-bonds, was more pronounced, with water increasing the percentage of 2 to 25% of the total population. Addition of sugar model compounds reversed this effect, so that formation of 2 was suppressed and exclusively 1 was found, indicating a strong interaction between the latter conformer and the carbohydrate.     

Upper critical solution temperature—type cononsolvency of poly(N,N-dimethylacrylamide) in water—organic solvent mixtures

The behaviour of linear poly(N,N-dimethylacrylamide) (PDMAM) chains was studied by turbidimetry and viscometry in mixtures of water with the polar organic solvents methanol, dioxane and acetone. The swelling-deswelling behaviour of PDMAM gels in the same solvent mixtures was also investigated. Contrary to the behaviour in water-methanol mixtures, in water-dioxane and water-acetone mixtures a significant shrinkage of polymer chains and deswelling of polymer gels, followed by phase separation, was observed for high organic solvent fractions. Cononsolvency phenomena were found to be temperature-dependent, as demixing occurred upon decreasing temperature. This upper critical solution temperature (UCST) phase separation behaviour in mixed solvents was studied by turbidimetry and compared to the well-known lower critical solution temperature (LCST) behaviour of poly(N-isopropylacrylamide) (PNIPAM) in similar solvents mixtures.     

Zwitterion effect in polyelectrolyte gels based on lithium methacrylate-N,N-dimethyl acrylamide copolymer

Zwitterionic compounds such as those based on 1-butylimidazolium-3-(n-butanesulfonate) have previously been shown to have positive effects on the transport properties of polyelectrolytes. The addition of the zwitterion has been found to, in some cases, increase the dissociation of the lithium ion and enhance the conductivity by almost an order of magnitude. In this work, we report the effects of adding the above-mentioned zwitterion into the polyelectrolyte gel system poly(lithium methacrylate-co-N,N-dimethyl acrylamide); the anionic group being a stronger base leads to different behaviour for this copolymer compared to previous work. Polyelectrolyte gels based on dimethyl sulfoxide and polyether solvents were investigated to determine the breadth of applicability of the zwitterion in improving lithium ion transport. Impedance spectroscopy and pulse field gradient-NMR diffusion indicate an increase in the number of available charge carriers with zwitterion addition in some gel systems, however, the effect is not universal.     

Measurements and modeling of high-pressure excess molar enthalpies and isothermal vapor-liquid equilibria of the carbon dioxide + N,N-dimethylformamide system

Mixtures of supercritical CO₂ and N,N-dimethylformamide (DMF) are very often involved in supercritical fluid applications and their thermodynamic properties are required to understand and design these processes. Excess molar enthalpies () for CO₂ + DMF mixtures were measured using an isothermal high-pressure flow calorimeter under conditions of temperature and pressure typically used in supercritical processes: 313.15 and 323.15 K at 9.00, 12.00, 15.00 and 18.00 MPa and 333.15 K at 9.00 and 15.00 MPa. The Peng-Robinson and the Soave-Redlich-Kwong equations of state were used in conjunction with the classical mixing rules to model the literature vapor-liquid equilibrium and critical data and the excess enthalpy data. In most cases, CO₂ + DMF mixtures showed very exothermic mixing and excess molar enthalpies exhibited a minimum in the CO₂-rich region. The lowest value (−4526 J mol⁻¹) was observed for a CO₂ mole fraction value of 0.713 at 9.00 MPa and 333.15 K. On the other hand, at 9.00 MPa and 323.15 and 333.15 K varies linearly with CO₂ mole fraction in the two-phase region where a gaseous and a liquid mixture of fixed composition are in equilibrium. The effects of pressure and temperature on the excess molar enthalpy are large. For a given mole fraction, mixtures become less exothermic as pressure increases or temperature decreases. These excess enthalpy data were analyzed in terms of molecular interactions, phase equilibria, density and critical parameters previously reported for CO₂ + DMF. All throughout this paper, the key concepts and modeling tools originate from the work of van der Waals: the paper is intended as a small piece of recognition of van der Waals overwhelming contributions to thermodynamics.     

Thermo- and pH-sensitive dendrimer derivatives with a shell of poly(N,N-dimethylaminoethyl methacrylate) and study of their controlled drug release behavior

Novel dendrimer derivatives combining the temperature- and pH-sensitivities are synthesized. At first, polyamidoamine (PAMAM) dendrimers with generations 1-5 are synthesized by the reaction of ethylenediamine with methyl acrylate, and then the dendrimers are acylated by chloroacetyl chloride to obtain PAMAM-Cl, which can act as a macroinitiator for further synthesizing functional dendrimers. For fulfilling this goal, the polymers consisting of a dendritic PAMAM core and poly(N,N-dimethylaminoethyl methacrylate) (PDMA) shell are synthesized by atom transfer radical polymerization (ATRP). Their macromolecular structures are characterized by FTIR, ¹H NMR, DSC and particle size analyses, and their aqueous solutions are inspected by UV spectroscopy for understanding their thermo- and pH-sensitivities. The results show that novel dendrimer derivatives exhibit clearly thermo- and pH-respondings in accordance with the change of the environment. Using chlorambucil (CLB) as a model drug, the behaviors of the controlled drug release from polymers with different average graft length of PDMA are studied. The results indicate that the rate of the drug release can be effectively controlled by the pH value.     

Adsorption of N,N′-dimethylthiourea at a mercury/aqueous solution of NaClO4 interface; dependence on the supporting electrolyte concentration

Adsorption of N,N′-dimethylthiourea (DMTU) on mercury electrode from 0.1, 1 and 5 M NaClO₄ was studied as the function of electrode charge density and adsorbate bulk concentration. In the study, the experimental data obtained from the measurements of differential capacity of double layer were used, the measurements of zero charge potential and surface tension at the zero charge potential. In each system studied the values of the relative surface excess increase with an increase of the concentration of N,N′-dimethylthiourea and NaClO₄. The adsorption parameters were obtained from the Frumkin, virial and modified Flory-Huggins isotherms. It was found that the values of free adsorption energy, interactions constants and integral capacity depends on the supporting electrolyte concentration. The strength of the surface bond formed between N,N′-dimethylthiourea and the electrode surface and the influence of water present on the electrode surface in the obtained results of calculations were discussed.     

Synthesis and photolytic properties of 1,5-di-N,N′-dialkylaminoanthraquinones containing acryloyl groups

Several l,5-di-N,N′-dialkyaminoanthraquinones containing acryloyl groups were synthesized and characterized by Fourier transform infrared (FTIR) and ¹H NMR spectroscopy. The photophysical and photoinduction properties of these anthraquinone derivatives were examined in solution, in combination with free radical producing agents such as hexa-aryl-bis-imidazoles (HABI). When UV–vis absorption and fluorescence spectroscopy were employed to investigate the photophysical process, results showed that the photobleaching rate of N-alkylaminoanthraquinones containing an acrylate group and HABI was much faster than the acrylate group-free N-alkylaminoanthraquinone/HABI combination. N-alkylaminoanthraquinone induced polymerization of 2-phenoxyethyl acrylate (POEA)/N-vinyl carbazole (NVC)/cellulose acetate butyrate (CAB) mixtures was studied using real-time infrared spectroscopy (RTIR). It was found that the rate of polymerization was faster if the acryloyl groups were connected to the N,N′-dialkylaminoanthraquinone structure and that 1,5-di-N,N′-dialkylaminoanthraquinone containing acryloyl groups was more sensitive to visible light system.     

CO2 absorption properties of Brønsted acid-base ionic liquid composed of N,N-dimethylformamide and bis(trifluoromethanesulfonyl)amide

The solubilities of CO₂ and the liquid densities in a Brønsted acid-base ionic liquid, [DMFH][Tf₂N], composed of N,N-dimethylformamide (DMF) and bis(trifluoromethanesulfonyl)amide (HTf₂N) have been investigated at high pressures and at different temperatures. The results were compared with those in DMF and a typical 1-butyl-3-methylimidazolium analogue with the same anion, [BMIM][Tf₂N]. The mole fraction scaled solubilities of CO₂ in the three liquids showed a slight increase in the following order, DMF < [DMFH][Tf₂N] < [BMIM][Tf₂N], whereas more remarkable difference was observed in the volume scaled concentrations of CO₂, [BMIM][Tf₂N] < [DMFH][Tf₂N] « DMF, mainly due to the bulkiness of liquid entities.     

Metal-free isotactic-specific radical polymerization of N-alkylacrylamides with 3,5-dimethylpyridine N-oxide: The effect of the N-substituent and solvent on the isotactic specificity

Radical polymerization of N-methylacrylamide (NMAAm), N-n-propylacrylamide, N-isopropylacrylamide (NIPAAm) and N-benzylacrylamide was investigated in CHCl₃, CH₂Cl₂ and CH₃CN, in the presence of 3,5-dimethylpyridine N-oxide (35DMPNO) to examine the effects of the N-substituent and the solvent on the isotactic specificity induced by 35DMPNO. With addition of 35DMPNO to radical polymerization of N-alkylacrylamides in CHCl₃, isotactic specificity was significantly induced in NIPAAm polymerization but only slightly induced in NMAAm polymerization. Furthermore, mixed solvents of CH₃CN and halomethanes such as CHCl₃ and CH₂Cl₂ enhanced the ability of 35DMPNO to induce isotactic specificity, and poly(NIPAAm) with 74% meso dyad was obtained.     

Influence of ionic liquids on the direct electrochemistry of glucose oxidase entrapped in nanogold-N,N-dimethylformamide-ionic liquid composite film

Glucose oxidase (GOD) immobilized in nanogold particles (NAs)-N,N-dimethylformamide (DMF) composite film on glassy carbon (GC) electrode exhibits a pair of quasi-reversible and unstable peaks due to the redox of flavin adenine dinucleotide (FAD) of GOD. When ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF₄) or trihexyltetradecylphosphorium bis (trifluoromethylsulfony) (P_666,14 NTf₂) is introduced in the film, the peaks become small. But ILs 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆) and 1-octyl-3-methylimidazolium hexafluorophate (OMIMPF₆) make the peaks large and stable. In different composite films the formal potential (E⁰′) of GOD is different. UV-vis spectra show that the GOD dispersed in these films almost retains its native structure and there are weak interactions between ILs and GOD. Electrochemical impedance spectra display that NAs can promote the electron transfer between FAD and GC electrode; and ILs can affect the electron transfer through interacting with GOD. The thermal stability of GOD entrapped in NAs-DMF-ILs composite films is also influenced by ILs, and it follows such order as: in NAs-DMF-OMIMPF₆ > in NAs-DMF-BMIMPF₆ ≈ in NAs-DMF-BMIMBF₄ > in NAs-DMF. In addition, GOD immobilized in NAs-DMF-OMIMPF₆ and NAs-DMF-BMIMPF₆ films shows good catalytic activity to the oxidation of glucose. The I_max of H₂O₂ and the apparent K_m (Michaelis-Menten constant) for the enzymatic reaction are calculated.     

Rheological behavior of cellulose/monohydrate of N-methylmorpholine N-oxide solutions. Part 2. Glass transition domain

Dynamic mechanical experiments performed with original conditions allowed the analysis of a solution containing 15% cellulose dissolved in a monohydrate of N-methylmorpholine N-oxide (NMMO) in the amorphous state. The glass transition zone is studied by dynamic tensile experiments, while dynamic torsion technique is used to determine the viscoelastic behavior in the glassy state. A master curve of the storage and loss modulus versus frequency can be deduced from the isochronal curves measured by both techniques. This work allows one to complete the corresponding master curve obtained for the ‘liquid’ state and presented in a previous work [Rheol. Acta 1998;37: 107]. The measurements below the glass transition temperature exhibit two secondary relaxations. A modeling of the overall viscoelastic behavior, using the Nowick and Berry approach and the quasi-point defect theory, is proposed. Physical parameters deduced from this modeling are then discussed.     

In situ FTIR study of the decomposition of N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide ionic liquid during cathodic polarization of lithium and graphite electrodes

In this work we analyzed the cathodic reactions of an important ionic liquid (IL) based electrolyte solution, namely lithium bis(trifluoromethylsulfonyl)imide (LiTFSI)/N-methyl-N-methylpyrrolidinium (BMP) TFSI. In situ FTIR spectroscopy was used for the analysis of gaseous products of the electrochemical decomposition of this IL solution during cathodic polarization of lithium metal and graphite electrodes. The main volatile product of the reductive decomposition of the anion in these BMPTFSI solutions is trifluoromethane. BMP cations decompose to mixtures of tertiary amines and hydrocarbons. The composition of the products is influenced by the nature of the anode material. Graphite possesses a catalytic activity in the electroreduction process of BMP cations which occurs along with their intercalation into the graphite structure. The liquid phase after cathodic polarization of graphite electrodes was analyzed by multinuclear NMR spectroscopy coupled with FTIR spectroscopy. ¹⁵N NMR and FTIR spectra revealed an increase in the Li cations content in the electrolyte solution, as a result of BMP cations decomposition during repeated cycling of graphite electrodes.     

Esterification of ethylene-vinyl alcohol copolymers in homogeneous phase using N,N′-dimethylpropyleneurea as solvent

Ethylene-vinyl alcohol copolymers (EVAL) were esterified with 3,5-dinitrobenzoyl chloride using the cycled urea N,N′-dimethylpropyleneurea (1,3-dimethyl-3,4,5,6-tetrahydro-2(1H)-pyrimidinone) (DMPU) as the solvent. Ethylene-vinyl alcohol-vinyl-3,5-dinitrobenzoate terpolymers (EVALVDNB) and ethylene-vinyl-3,5-dinitrobenzoate copolymers (EVDNB) were obtained. Both EVAL copolymers (6-73 mol% VAL) and esterified polymers, EVDNB, and EVALVDNB dissolve in DMPU. The substitution may become total under the experimental conditions. The degree of transformation was determined by ¹H NMR. EVDNB copolymers were characterised by IR spectroscopy and ¹H and ¹³C NMR. Thermal properties were studied by DSC. The glass transition temperature of the EVDNB copolymers having a low VDNB content (up to 14 mol%) is roughly constant, whereas above 50 mol% increases. Melting temperature decreases as the VDNB content is increased, owing to the fact that the VDNB groups are excluded from the polyethylene crystal lattice.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

Maghnite-H, an ecocatalyst for cationic polymerization of N-vinyl-2-pyrrolidone

The polymerization of N-vinyl-2-pyrrolidone catalyzed by the Maghnite-H⁺ (Mag-H) was investigated. Mag-H is a montmorillonite sheet silicate clay, exchanged with protons. It was found that the cationic polymerization of N-vinyl-2-pyrrolidone (NVP) is initiated by Mag-H at 30 °C in bulk and in solution. The effect of the amount of Mag-H, the temperature and the solvent was studied. The polymerization rate increased with increase in the temperature and the proportion of catalyst, and it was larger in nitrobenzene than that in toluene. These results indicated the cationic nature of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from Mag-H.     

Hydrolytic degradation of poly[(R)-3-hydroxybutyric acid] in the melt

Poly[(R)-3-hydroxybutyric acid] [R-P(3HB)] was hydrolyzed in high-temperature and high-pressure water at the temperature range of 180-300 °C and for a period of 360 min. The formation, racemization, and decomposition of 3-hydroxybutyric acids (3HBs) and molecular weight change of R-P(3HB) were investigated. The highest yield of (R)-3-hydroxybutyric acid (R-3HB), ca. 80%, was obtained at 200 °C in the hydrolytic degradation periods of 240-360 min. Too-high hydrolytic degradation temperature such as 300 °C induced the decomposition and racemization of formed 3HBs, resulting in decreased yield of R-3HB. The hydrolytic degradation of R-P(3HB) proceeds homogeneously and randomly via a bulk erosion mechanism. The molecular weight of R-P(3HB) decreased exponentially without formation of low-molecular-weight specific peaks originating from crystalline residues. The hydrolytic degradation rates in the melt estimated from M_n changes were lower for R-P(3HB) than for poly(l-lactide) (PLLA) in the temperature range of 180-220 °C. The activation energy for the hydrolytic degradation (ΔE_h) of R-P(3HB) in the melt (180-250 °C) was 30.0 kcal mol⁻¹, which is higher than 12.2 kcal mol⁻¹ for PLLA in the melt in the temperature range (180-250 °C). This study reveals that hydrolytic degradation of PHB in the melt is an effective and simple method to obtain (R)-3HB and to prepare R-P(3HB) having different molecular weights without containing the specific low-molecular-weight chains, because of the removal of the effect caused by crystalline residues.     

H NMR study of temperature-induced phase transitions in D2O solutions of poly(N-isopropylmethacrylamide)/poly(N-isopropylacrylamide) mixtures and random copolymers

¹H NMR spectroscopy was used to investigate temperature-induced phase transitions in D₂O solutions of poly(N-isopropylmethacrylamide) (PIPMAm)/poly(N-isopropylacrylamide) (PIPAAm) mixtures and P(IPMAm/IPAAm) random copolymers of various composition on molecular level. While two phase transitions were detected for PIPMAm/PIPAAm mixtures, only single phase transition was found for P(IPMAm/IPAAm) copolymers. The phase transition temperatures of PIPAAm component (appears at lower temperatures) are not affected by the presence of PIPMAm in the mixtures; on the other hand, the temperatures of the phase transition of PIPMAm component (appears at higher temperatures) are affected by the phase separation of the PIPAAm component and depend on concentration of the solution. For P(IPMAm/IPAAm) random copolymers, a departure from the linear dependence of the transition temperatures on the copolymer composition was found for a sample with 75 mol% of IPMAm monomeric units.