Removal of fluoride from aqueous solution by polypyrrole/Fe3O4 magnetic nanocomposite

Highly efficient visible light TiO₂ photocatalyst was prepared by the sol-gel method at lower temperature (≤300 °C), and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and differential scanning calorimetry-thermogravimetric analysis (DSC-TGA). The effects of the heat treatment temperature and time of the as-prepared TiO₂ on its visible light photocatalytic activity were investigated by monitoring the degradation of methyl orange solution under visible light irradiation (wavelength ≥ 400 nm). Results show that the as-prepared TiO₂ nanoparticles possess an anatase phase and mesoporous structure with carbon self-doping and visible photosensitive organic groups. The visible light photocatalytic activity of the as-prepared TiO₂ is greatly higher than those of the commercial TiO₂ (P-25) and other visible photocatalysts reported in literature (such as PPy/TiO₂, P3HT/TiO₂, PANI/TiO₂, N-TiO₂ and Fe³⁺-TiO₂) and its photocatalytic stability is excellent. The reasons for improving the visible light photocatalytic activity of the as-prepared TiO₂ can be explained by carbon self-doping and a large amount of visible photosensitive groups existing in the as-prepared TiO₂. The apparent optical thickness (τ_app), local volumetric rate of photo absorption (LVRPA) and kinetic constant (k_T) of the photodegradation system were calculated.     

Nitrogen-doped TiO2 nanotubes with enhanced photocatalytic activity synthesized by a facile wet chemistry method

Nitrogen-doped TiO₂ nanotubes with enhanced photocatalytic activity were synthesized using titanate nanotubes as raw material by a facile wet chemistry method. The resulting nanotubes were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, and UV-vis absorption spectroscopy, etc. The photocatalytic activity of nitrogen-doped TiO₂ nanotubes was evaluated by the decomposition of methylene blue under artificial solar light. And it was found that nitrogen-doped TiO₂ nanotubes exhibited much higher photocatalytic activity than undoped titanate nanotubes.     

Decoration of Cu nanowires with chemically modified TiO2 nanoparticles for their improved photocatalytic performance

In this work, TiO₂ nanoparticles/Cu nanowires (TiO₂NPs@CuNWs) binary composites with tunable coverage of TiO₂ nanoparticles were prepared by a facile method of mixing oleic acid-modified TiO₂ nanoparticles with as-prepared Cu nanowires. Characterization studies including X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and high-resolution transmission electron microscopy were applied to investigate the structure and morphology of the as-synthesized TiO₂NPs@CuNWs binary composites. The photocatalytic activity of TiO₂NPs@CuNWs binary composites was examined by photodegradation of methyl orange. The enhanced photocatalytic efficiency of TiO₂NPs@CuNWs nanocomposites was ascribed to the moderate specific surface area, mesoporous structures, and the electron sink effect of the Cu nanowires. In principle, our investigation indicates that the TiO₂@Cu self-assembled nanostructures can be a promising candidate of composite photocatalysts.     

Visible light photocatalytic properties of novel molybdenum treated carbon nanotube/titania composites

Two types of molybdenum–carbon nanotubes and molybdenum treated carbon nanotubes/titania composites were prepared using a sol–gel method. These composites were characterized comprehensively by the Brauer–Emett–Teller (BET) surface area, scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis absorption spectroscopy. It was found that the photocatalytic degradation of a methylene blue solution could be attributed to the combined effects caused by the photo-degradation of titania, the electron assistance of carbon nanotube network, and the enhancement of molybdenum. The proposed redox mechanism of the photodegradation of methylene blue on Mo-CNT/TiO₂ composites is suggested.     

Preparation and photocatalytic activity of N-doped TiO2 nanotube array films

The N-doped TiO₂ nanotube array films were fabricated directly by one-step electrochemical anodic oxidation of Ti foils in an HF electrolyte containing ammonium and nitrate ions. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDX), and ultraviolet–visible (UV–vis) absorption spectroscopy, respectively. The photocatalytic activities were evaluated by the degradation of methyl orange (MO) under visible light irradiation. The results showed that N dopant was successfully introduced into the TiO₂ nanotube array films. The N-doped TiO₂ nanotube array films showed a red shift and an enhancement of the absorption in the visible light region compared to the undoped sample. The photocatalytic activities of the N-doped TiO₂ samples were much higher than those of the undoped sample. A maximum enhancement of photocatalytic activity was achieved for the N-doped TiO₂ sample prepared in 0.07 M HF electrolyte containing 1.0 M NH₄NO₃, and 81% of MO was degraded in 150 min under visible light irradiation.     

Preparation of nitrogen doped TiO2 photocatalyst by oxidation of titanium nitride with H2O2

Nitrogen doped anatase TiO₂ (N-TiO₂) were prepared by hydrothermally treating TiN with H₂O₂. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV-vis diffuse reflectance spectrum (DRS), Fourier transform infrared spectra (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirmed that the hydrothermal oxidation is an effective method to prepare N-doped TiO₂ anatase. The nitrogen concentration in TiO₂ could be controlled by the concentration of H₂O₂ solution. Photocatalytic degradation of methyl orange (MO) was carried out under visible light and UV-visible light irradiation, respectively. The as-prepared optimal N-TiO₂ showed higher photocatalytic activity than N-P25 and P25, and exhibited excellent reusability.     

Synthesis and characterization of Ag/TiO2-B nanosquares with high photocatalytic activity under visible light irradiation

Square-like B doped TiO₂ nanocrystals were first synthesized by a mild solvothermal method with H₃BO₄ and titanium isopropoxide as the precursors, and isopropyl alcohol as reaction medium. Then, Ag nanoparticles were deposited on TiO₂-B nanosquares by photo-deposition. The as-synthesized products have been investigated by photocatalytic reaction test and characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV–vis diffuse reflectance spectra (DRS). The results showed that boron was successfully doped into TiO₂ nanosquares under solvothermal condition. The obtained Ag/TiO₂-B composite showed high efficiency in degradation of acid orange II under visible light irradiation. The high photocatalytic performance could be attributed to the synergistic effect of B doping and the plasmon photocatalysis role of the deposited silver nanoparticles over TiO₂.     

Preparation of a high-activity ZnO/TiO2 photocatalyst via homogeneous hydrolysis method with low temperature crystallization

The nano-scale ZnO/TiO₂ coupled oxide photocatalyst was successfully synthesized by a two-step method, the homogeneous hydrolysis and low temperature crystallization. The resultant photocatalyst was characterized by ultraviolet-visible absorption spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) techniques. The photocatalytic activity of coupled oxides was also evaluated by the degradation of methyl orange (MO) as a model compound. The experimental results showed that the prepared ZnO/TiO₂ at low hydrothermal crystallization temperature exhibited higher photocatalytic activity for the decomposition of MO than either pure phase ZnO or anatase TiO₂, and even higher than that of the Degussa P25 TiO₂.     

Growth and characterization of flower-like Ag/ZnO heterostructure composites with enhanced photocatalytic performance

Flower-like Ag/ZnO heterostructure composites were prepared through a solvothermal method without surfactants or templates. The products were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and photoluminescence (PL) spectroscopy. Results demonstrate that flower-like Ag/ZnO heterostructure composites were composed of wurtzite ZnO flowers coated by face-center-cubic Ag nanoparticles. The growth process of flower-like ZnO crystals was investigated, and a possible growth mechanism was proposed. The photocatalytic activity of the as-prepared flower-like Ag/ZnO samples, pure ZnO samples, and commercial TiO₂ (Degussa, P-25) was tested with the photocatalytic degradation of methylene blue. Results show that the Ag/ZnO heterostructures were superior in photocatalytic activity to the pure ZnO samples and the commercial TiO₂ (Degussa, P-25), but the mixture of Ag (0.1 wt%) particles and ZnO flowers did not, which implies that the heterostructure promoted the separation of photogenerated electron–hole pairs, enhancing the photocatalytic activity. That was primarily verified by the PL results.     

Preparation of Fe-doped TiO2 nanotube arrays and their photocatalytic activities under visible light

Fe-doped TiO₂ nanotube arrays have been prepared by the template-based liquid phase deposition method. Their morphologies, structures and optical properties were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction and UV-vis absorption spectroscopy. Their photocatalytic activities were evaluated by the degradation of methylene blue under visible light. The UV-vis absorption spectra of the Fe-doped TiO₂ nanotube arrays showed a red shift and an enhancement of the absorption in the visible region compared to the undoped sample. The Fe-doped TiO₂ nanotube arrays exhibited good photocatalytic activities under visible light irradiation, and the optimum dopant amount was found to be 5.9 at% in our experiments.     

TiO2 supported on rod-like mesoporous silica SBA-15: Preparation, characterization and photocatalytic behaviour

TiO₂ nanoparticles have been successfully incorporated in the pores of mesoporous silica SBA-15 with different morphologies by a wet impregnation method. The composites were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), inductively coupled plasma (ICP) emission spectroscopy, transmission electron microscopy (TEM), N₂-sorption and UV-Vis diffuse reflectance spectroscopy. The photodegradation of methyl orange (MO) was used to study their photocatalytic property. It is indicated that the morphology of SBA-15 had a great influence on the photocatalytic activity of the composites. When TiO₂/SBA-15 composite was prepared by loading TiO₂ nanoparticles on uniform rod-like SBA-15 of 1 μm length, it showed higher photocatalytic degradation rate than that on less regular but much larger SBA-15 support. This difference was rationalized in terms of the homogeneously distributed and shorter channels of rod-like SBA-15, which favored mass transport and improved the efficient utilization of the pore surface.     

Preparation, characterization and photocatalytic performances of materials based on CS2-modified titanate nanotubes

CS₂-modified titanate nanotubes (CS₂/TiO₂-NTs) are fabricated by reaction of CS₂ and Ti-O^?Na⁺ species on titanate nanotubes. Pb²⁺ ions are coated on the modified nanotubes by ion exchange (Pb/CS₂/TiO₂-NTs). The products are characterized by means of nitrogen adsorption-desorption isotherms at 77 K (BET method), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), X-ray diffraction (XRD), atomic absorption spectrometry (AAS), and diffuse reflectance spectroscopy (DRS). The photocatalytic performances of the products are evaluated by monitoring their catalytic activities for degradation of methyl orange under UV light irradiation. The effects of calcination temperature and atmosphere on the photocatalytic performance are investigated. The results reveal that the photocatalytic activities of CS₂/TiO₂-NTs and Pb/CS₂/TiO₂-NTs are far higher than that of primary nanotubes, and the optimum calcination temperature is 500 °C under N₂ atmosphere. It is also discovered that physically adsorbed Pb²⁺ ions affect the photocatalytic activity of Pb/CS₂/TiO₂-NTs obviously. The photocatalytic activity of washed Pb/CS₂/TiO₂-NTs is higher than that of the unwashed one under the same thermal treatment and reaction conditions.     

Synthesis and characterization of copper ions surface-doped titanium dioxide nanotubes

Copper ions surface-doped titanium dioxide nanotubes were prepared via an assembly process based on the reactions between Cu(NH₂CH₂CH₂NH₂)₂(OH)₂ and hydroxide radicals on the surface of TiO₂ nanotubes, followed by the heat treatment in air at 723 K. The as-prepared samples were characterized with infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and fluorescence spectroscopy (FL). The photocatalytic activity of the copper ions surface-doped titanium dioxide nanotubes was investigated by photodegradation of Rhodamine B. The results showed that copper ions were successfully introduced onto the surface of TiO₂ nanotubes. And two kinds of copper species of Cu(I) and Cu(II) were found on TiO₂ surface. Copper ions act as electron trappers facilitating the separation of electrons and holes on the surface of TiO₂ nanotubes, which allows more efficiency for the photodegradation of Rhodamine B.     

Synthesis of nanostructure rutile TiO2 in a carboxyl-containing ionic liquid

Nanostructure rutile TiO₂ was prepared in a carboxyl-containing ionic liquid, 1-methylimidazolium-3-acetate chlorine ([AcMIm]Cl), by using TiOCl₂ solution as a precursor at low temperature. The obtained nanostructure TiO₂ was analyzed with fourier transform infrared (FTIR), X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The as-prepared TiO₂ present only rutile crystal phase and a novel flower-like morphology. The as-prepared rutile TiO₂ shows better photocatalytic performance in the degradation of methyl orange. The template-directing performance of ionic liquid is due to the bidentate chelating complexation between the carboxylic functional group of ionic liquid and titania.     

Mesocrystalline TiO<Subscript>2</Subscript>/sepiolite composites for the effective degradation of methyl orange and methylene blue

Mesocrystalline TiO₂/sepiolite (TiS) composites with the function of adsorption and degradation of liquid organic pollutants were successfully fabricated via a facile and low-cost solvothermal reaction. The prepared TiS composites were characterized by FESEM, HRTEM, XRD, XPS, N₂ adsorption-desorption, UV–vis DRS, and EPR. Results revealed the homogeneous dispersion of highly reactive TiO₂ mesocrystals on the sepiolite nanofibers. Thereinto each single–crystal–like TiO₂ mesocrystal comprised many [001]-oriented anatase nanoparticles about 10–20 nm in diameter. The photocatalytic activity was further evaluated by the degradation of anionic dye (methyl orange) and cationic dye (methylene blue) under the UV-vis light (350≤λ≤780 nm) irradiation. By selecting appropriate experimental conditions, we can easily manipulate the photocatalytic performance of TiS composites. The optimal TiS catalyst (the sepiolite content of 28.5 wt.%, and the reaction time of 24 h) could efficiently degrade methyl orange to 90.7% after 70 min, or methylene blue to 97.8% after 50 min, under UV-vis light irradiation. These results can be attributed to their synergistic effect of high crystallinity, large specific surface area, abundant hydroxyl radicals, and effective photogenerated charge separation.     

Synthesis and characterization of TiO2/WO3 composite nanotubes for photocatalytic applications

TiO₂/WO₃ composite nanotubes were synthesized in an anodic aluminum oxide (AAO) template by a sol–gel method. The prepared nanotubes were characterized by transmission electron microscopy, scanning electron microscopy, powder X-ray diffraction, and Brunauer–Emmett–Teller surface area. Using the nanotubes embedded in the AAO templates as catalysts, photocatalytic degradation of methyl orange aqueous solution was carried out under UV light irradiation. The results showed that the TiO₂/WO₃ composite nanotubes with the thickness about 50 nm could be successfully synthesized by this method. TiO₂ showed anatase phase and WO₃ displayed monoclinic phase. The composite nanotubes (TiO₂/WO₃) exhibited higher photocatalytic activity than the pure nanotubes (WO₃ or TiO₂). The possible reason for improving the photocatalytic activity was also discussed.     

Enhanced photocatalytic activity of silver nanoparticles modified TiO2 thin films prepared by RF magnetron sputtering

Ag-TiO₂ nanostructured thin films with silver volume fraction of 0–40% were prepared by RF magnetron sputtering. The microstructure, surface topography, and optical properties of the films were characterized by X-ray diffractometer, transmission electron microscope, and ultraviolet–visible spectrophotometer. Photocatalytic activity of the films was evaluated by light-induced degradation of methyl orange (C₁₄H₁₄N₃NaO₃S) solution using a high pressure mercury lamp as lamp-house. The relation of photocatalytic activity and silver content was studied in detail. It is found that silver content influences microstructure of TiO₂ thin films, and silver in the films is metallic Ag (Ag⁰). Photocatalytic activity of the films increases with increasing silver content up to 5 vol.% Ag and then decreases to values significantly still bigger than that of pure TiO₂ thin films. Silver nanoparticles significantly enhance the photocatalytic activity of TiO₂ films. The better separation between electrons and holes on silver modified TiO₂ thin films surface allowed more efficiency for the oxidation and reduction reactions. The enhanced photocatalytic activity was mainly attributed to the decrease of energy gap of the films and the increase of oxygen anion radicals O₂⁻ and reactive center of surface Ti³⁺ on silver modified TiO₂ thin films surface.     

Facile synthesis of Ag nanoparticles supported on TiO2 inverse opal with enhanced visible-light photocatalytic activity

TiO₂ inverse opal films loaded with silver nanoparticles (ATIO) were synthesized on glass substrates. TiO₂ inverse opal (TIO) films were prepared via a sol-gel process using self-assembly of SiO₂ colloidal crystal template and a facile wet chemical route featuring an AgNO₃ precursor solution to fabricate silver nanoparticles on the TIO films. The inverse opal structure and Ag deposition physically and chemically modify titania, respectively. The catalysts were characterized by Raman spectroscopy, field-emission scanning electron microscopy, high-resolution transmission electron microscopy (HRTEM), UV-vis absorption spectra, X-ray photoelectron spectroscopy and photoluminescence spectroscopy. The HRTEM results show that Ag nanoparticles measuring 5-10 nm were evenly distributed on TIO. Both the UV- and visible-light photocatalytic activities of the samples were evaluated by analyzing the degradation of methylene blue (MB) in aqueous solution. The results reveal that the apparent reaction rate constant (k_app) of MB degradation of the sample ATIO under UV-light irradiation is approximately 1.5 times that of the conventional Ag-loaded TiO₂ film (ATF) without an ordered porous structure at an AgNO₃ concentration of 5 mM in the precursor solution. At an AgNO₃ concentration of 10 mM, the sample exhibits a k_app value approximately 4.2 times that of ATF under visible-light irradiation. This enhanced visible-light photocatalytic performance can be attributed to the synergistic effect of optimized Ag nanoparticle deposition and an ordered macroporous TIO structure. Repeated cycling tests revealed that the samples showed stable photocatalytic activity, even after six repeated cycles.     

Structural,morphological and photocatalytic characterisations of Ag-coated anatase TiO2 fabricated by the sol–gel dip-coating method

This study reports on the synthesis, characterisation and environmental applications of immobilised Titanium dioxide (TiO₂) as photocatalyst. Nanostructured thin films have been prepared on glass substrates using a layer-by-layer dip-coating method. The crystalline phase and surface morphology of the thin films were investigated by X-ray diffraction (XRD) pattern and scanning electron microscopy (SEM), respectively. The XRD results show that the TiO₂ thin films crystallise in anatase phase and we have found that the thin films consist of titanium dioxide nanocrystals. SEM shows that the nanoparticles are sintered together to form a compact structure and TiO₂ particles coated with silver nanoclusters were observed. Ag-coated TiO₂ films demonstrated photocatalysis performance when irradiated, and the Ag carrier further showed an electron-scavenging ability to mitigate electron–hole pair recombination, which can improve the photocatalytic efficiency. With the oxidisation and electron-scavenging ability of Ag and the photocatalysis ability of TiO₂, Ag-coated TiO₂ can decolour methyl orange (MO) more than bare TiO₂. It is a new approach to form Ag-coated TiO₂ nanoparticles with a simple system and non-toxic materials. The high photocatalytic effect of Ag-coated TiO₂ nanoparticles on pollutant (MO) suggests that it may have a promising future for water and wastewater treatments.     

Fabrication and performances of MWCNT/TiO<Subscript>2</Subscript> composites derived from MWCNTs and titanium (IV) alkoxide precursors

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composites were synthesized by sol-gel technique using titanium (IV) n-butoxide (TNB), titanium (IV) isopropoxide (TIP) and titanium (IV) propoxide (TPP) as different titanium alkoxide precursors. The as-prepared composites were comprehensively characterized by BET surface area, SEM, XRD, EDX and UV-Vis absorption spectroscopy. The samples were evaluated for their photocatalytic activity towards the degradation of methylene blue (MB) under UV irradiation. The results indicated that the sample MPB had best excellent photocatalytic activity among the three kinds of samples. Furthermore, we also used piggery waste to determine the photocatalytic activity for the MWCNT/TiO₂ composites by using a chemical oxygen demand (COD) method. It seemed all of the samples have an excellent removal effect of COD. From the results of the bactericidal test, MWCNT/TiO₂ composites with sunlight had a greater effect on E. coli than any other experimental conditions.