交替循环浸泡在TiO2纳米管管内填充类骨磷灰石

采用"交替循环浸泡法（ALIM）"在TiO₂纳米管管内填充类骨磷灰石,使磷灰石涂层由层状结构变为嵌入式结构,并考察填充量与TiO₂纳米管结构间的关系,通过模拟体液浸泡实验评价其生物活性.结果表明,甘油体系（60V电压）中制备的纳米管填充效果最好;无定型的TiO₂纳米管相比锐钛矿相的TiO₂纳米管更能诱导类骨磷灰石的填充;采用ALIM于TiO₂纳米管上填充类骨磷灰石可大大提高其生物活性.     

Ar等离子体改性纳米钛基TiO2薄膜生物活性研究

采用室温直流磁控溅射技术在纳米晶体钛表面制备TiO2薄膜,并用Ar等离子体对TiO2薄膜进行表面改性,体外模拟体液浸泡实验考察薄膜的生物活性。系统研究了Ar等离子体处理对TiO2薄膜结构、形貌、亲水性、生物活性的影响规律。结果表明:Ar等离子体处理不改变纳米晶体钛表面TiO2薄膜晶体结构(主要为金红石相),但显著改善TiO2薄膜均匀性、光滑性和亲水性。Ar等离子体处理后,TiO2薄膜在模拟体液浸泡中诱导的Ca/P层由球状团簇无定型结构转变为内联多孔网状磷灰石和磷酸八钙相结构,显示优异的生物活性。     

生物活性聚乳酸/SiO2-CaO复合薄膜的制备和表征（英文）

以聚乳酸、正硅酸乙酯和硝酸钙为原料,采用溶胶-凝胶方法制备了不同比例的聚乳酸/SiO2-CaO多孔复合薄膜.采用扫描电子显微镜和红外光谱仪对薄膜的微观结构和组成进行分析,并利用表面Zeta电位测定仪对其表面电位进行表征,通过模拟体液浸泡实验和MTT方法对薄膜的生物活性和细胞毒性进行评价.结果表明:复合薄膜在模拟体液中经过7d的浸泡,薄膜表面形成了环状结构的类骨磷灰石层;随着SiO2-CaO含量增加,复合薄膜表面微孔的孔径变小,薄膜表面Zeta电位变负,诱导类骨磷灰石沉积的能力增强;MTT实验证实复合薄膜对MG-63细胞没有毒性且有利于细胞的增殖.     

生物活性钛涂层

真空等离子喷涂的钛涂层经 ５．０ｍｏｌ／Ｌ ＮａＯＨ溶液处理后,将其浸泡在含 Ｃａ^２＋、ＨＰＯ_４^２－的模拟生理体液（ＦＣＳ和ＳＢＦ）中,考察涂层诱导羟基磷灰石生长过程,并评价其生物活性．用ＳＥＭ观察碱处理前后和在模拟生理体液中浸泡后钛涂层的形貌,用ＡＥＳ分析了碱处理前后钛涂层的表面成分;用ＸＲＤ、ＦＴ－ＩＲ和ＥＤＳ表征浸泡后涂层表面生长物的结构和成分;并测量了处理后钛涂层在浸泡过程中溶液中离子浓度和ｐＨ值的变化．结果表明,经处理的钛涂层在模拟生理体液中能诱导羟基磷灰石在其表面生长;在ＳＢＦ和ＦＣＳ分别形成碳酸羟基磷灰石层和含氧磷灰石的羟基磷灰石层．钛涂层的活性是由于碱处理后表面形成了网状和纤维状结构的Ｎａ－Ｔｉ－Ｏ化合物．这种化合物在模拟生理溶液中释放Ｎａ^＋,吸收Ｈ^＋;形成水化钛酸盐,诱导羟基磷灰石成核生长．     

等离子体喷涂氧化钛涂层的生物活性研究

以纳米TiO₂粉末为喷涂原料, 采用大气等离子体喷涂技术在医用钛合金上制备氧化钛涂层. 利用酸和碱溶液对氧化钛涂层表面进行生物活化处理, 体外模拟体液浸泡实验考察涂层的生物活性. 采用XRD、SEM、FTIR、EDS等测试技术对改性前后氧化钛涂层的生物活性进行表征. 结果表明: 氧化钛涂层和钛合金基体的结合强度较高, 其值高达40MPa, 涂层的耐模拟体液腐蚀性优于钛合金. 酸和碱溶液表面改性后的氧化钛涂层经模拟体液浸泡可在其表面生成含有碳酸根的羟基磷灰石(类骨磷灰石), 显示良好的生物活性.     

磷酸钙陶瓷在不同动物的模拟体液中类骨磷灰石的形成研究

根据人、狗、猪、猴和兔五种动物体液的钙离子浓度和pH值的差异,配制了不同组分的模拟体液,将孔壁致密和有微孔的多孔磷酸钙陶瓷分别浸泡在这些模拟体液中,研究陶瓷孔隙表面类骨磷灰石的形成情况.结果表明:在模拟体液中浸泡14天后,孔壁致密的材料未见有类骨磷灰石层形成;有微孔的多孔磷酸钙陶瓷,材料孔壁表面(包括陶瓷表面较深孔隙)有类骨磷灰石层的形成,这与体内植入实验观察到的类骨磷灰石层形成和诱导成骨情况相似,可以推论类骨磷灰石层的形成的确是骨诱导的先决条件.随着钙离子浓度的增加,其孔壁表面类骨磷灰石层的形成也更为均匀,但类骨磷灰石生长快慢顺序与动物组织学观察到的骨诱导性高低的次序不完全一致.     

生物陶瓷及其复合材料表面诱导类骨磷灰石层形成的研究

钙磷生物材料表面类骨磷灰石层的形成对其植入体内诱导新骨生成起非常重要的作用.本实验采用2倍模拟体液(2×SBF)为介质,通过仿生浸泡的方法研究了羟基磷灰石(HA)陶瓷及其复合材料羟基磷灰石/聚乳酸(HA/PLA)、羟基磷灰石/聚己內脂(HA/PCL)、羟基磷灰石/丝素(HA/SF)和羟基磷灰石/壳聚糖(HA/CS)表面诱导类骨磷灰石层形成的差异.实验结果表明,HA陶瓷及其复合材料在2×SBF溶液中仿生浸泡7d后,各样品表面均有一层厚度不同的类骨磷灰石层生成.并且该类骨磷灰石层的结晶度较低,晶粒较细(15～30nm),与人体自然骨无机物的结构非常类似.其中,在这4种复合材料中,HA/CS和HA/SF复合材料中因丝素蛋白和壳聚糖富含多种功能基团,能有效促进类骨磷灰石晶体的形核和生长,因而诱导类骨磷灰石生成的能力最强,显示其良好的生物活性.     

纳米结构316L不锈钢基掺钽TiO_2薄膜生物活性研究

采用射频磁控溅射技术在表面微结构纳米化316L不锈钢和粗晶粒316L不锈钢基体上制备掺钽TiO2薄膜。采用扫描电镜和X射线衍射仪分析薄膜形貌和晶体结构,用体外模拟人体体液浸泡实验研究薄膜的生物活性。结果表明:表面微结构纳米化的316L不锈钢具有强烈诱导掺钽TiO2薄膜形核效应;316L不锈钢表面微结构纳米化能显著提高自身及其表层掺钽TiO2薄膜的生物活性;316L不锈钢表面纳米化后,其表层掺钽TiO2薄膜诱导的羟基磷灰石形貌由原先的球状变为多孔网状结构。     

医用钛合金微弧氧化膜的制备及其生物适应性能

在钛及钛合金表面生成羟基磷灰石（HA）来制备生物材料是医学应用中亟待解决的问题。利用微弧氧化工艺在Ti合金表面制备了HA膜,研究了膜层在模拟体液中浸泡前后的形貌、相结构、Ca与P原子分数比,并分析了膜层在模拟体液中的降解和沉淀机制以及浸泡后的耐磨性。结果表明：膜层在模拟体液中随浸泡时间延长而逐渐变厚;浸泡20d后膜层中...     

纳米钛基TiO_2薄膜生长特点和生物活性研究

采用直流磁控溅射法分别在纳米晶体钛和粗晶粒工业纯钛表面沉积TiO2薄膜,研究了纳米钛基TiO2薄膜的结构形貌、形核、生长、晶体结构和体外生物活性。用扫描电镜和X射线衍射仪分析了薄膜的表面形貌和晶体结构,用体外模拟人体体液浸泡诱导羟基磷灰石生长实验表征薄膜的生物活性。结果表明:纳米钛基薄膜形核率高,薄膜非常致密、光滑,晶粒细小,仅为粗晶粒钛基TiO2薄膜晶粒尺寸的一半,约100nm;钛基材纳米晶体化可促进薄膜由锐钛矿相向金红石相转变;钛基材纳米化可显著提高自身及其表面TiO2薄膜的生物活性。     

SBA-15 ordered mesoporous silica inside a bioactive glass–ceramic scaffold for local drug delivery

The paper reports the synthesis of an ordered silica mesostructure of the SBA-15 type inside a macroporous bioactive glass-ceramic scaffold of the type SiO(2)-CaO-K(2)O, to combine the bioactivity of the latter with the release properties of the former, in view of local drug delivery from implants designed for tissue engineering. The standard procedure for SBA-15 synthesis has been modified to minimize the damage to the scaffold caused by the acidic synthesis medium. The composite system has been characterized by means of Scanning Electron Microscopy (coupled with EDS analysis), Small Angle X-Ray Diffraction, Thermogravimetry analysis and Infrared Spectroscopy: the formation of a well ordered hexagonal mesostructure was confirmed. Ibuprofen has been chosen as model drug. The uploading properties have been investigated of the scaffold-mesoporous silica composite as compared with the scaffold as such, and a five-fold increase in the adsorbing properties toward ibuprofen was found, due to the presence of the ordered mesoporous silica. The ibuprofen release to a SBF solution in vitro is complete in 1 day. Retention of bioactivity from the glass-ceramic scaffold after the silica mesostructure incorporation has been observed.     

The Role of Defects in the Formation of Mesoporous Silica Fibers,Films, and Curved Shapes

The main goal of this research news article is to describe how different kinds of topological defects that exist in a silicate liquid crystal seed can initiate and direct the growth of particular forms of mesoporous silica. This avenue of investigation emerged from the results of scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and polarized optical microscopy (POM) studies of hexagonal mesoporous silica fibers, films, and curved shapes, which delineated the essential relations between synthesis conditions, morphology, bulk and surface mesostructure, and optical birefringence textures.^[1–3] While SEMs of faceted mesoporous silica first appeared in 1992,^[4] the recognition, understanding, and significance of morphogenesis of mesoporous silica with curved shapes emerged in a series of papers from our laboratory.     

TiO_2纳米管/介孔SiO_2复合膜的制备及生物活性研究

以表面构筑了TiO2纳米管阵列的金属钛为基底,采用溶胶-凝胶工艺和浸渍-提拉技术涂覆介孔SiO2薄膜,构建了TiO2纳米管/介孔SiO2复合膜。利用SAXRD、FTIR、HRTEM和FESEM等表征样品的结构和微观形貌。研究表明,在高度有序、规整排列的TiO2纳米管阵列基底上,利用溶胶-凝胶工艺和浸渍-提拉技术涂覆有六方相介孔SiO2薄膜的复合膜具有良好的生物活性。     

蒸发诱导自组装仿生合成高有序度三维六方介孔氧化硅薄膜

借鉴自然界生物矿化的形成机理,利用蒸发诱导自组装(EISA)的方法,以十六烷基三甲基溴化铵(CTAB)为结构导向剂,正硅酸乙酯(TEOS)为硅源,通过浸渍提拉在普通玻璃片上制备出高有序度、三维六方结构的介孔氧化硅薄膜,通过XRD、TEM、低温N2吸附/脱附等方法对薄膜进行了表征,并初步讨论了形成三维六方结构的机理.     

Design of single-site Ti embedded highly hydrophilic silica thin films with macro-mesoporous structures

Single-site Ti-containing macroporous silica thin films with mesoporous frameworks were successfully prepared on quartz substrate with high transparency by using poly(methyl methacrylate) (PMMA) microspheres and organic surfactant as template of porous structures. The presence of mesoporous structure and the differences of macroporous structure of film surface were investigated by XRD and FE-SEM measurements. The local structure of Ti moieties embedded within silica matrixes were also confirmed by UV-vis investigations. It was found that the macroporous structure and the embedded single-site Ti moieties within mesoporous frameworks were quite effective for improvement of surface hydrophilicity, i.e., the water droplet was entirely spread on the film surface even before and after irradiation of UV light.     

Critical effect of aging condition on mesostructural ordering in mesoporous titania thin film

Here we demonstrate facile synthesis method for formation of highly ordered mesoporous cubic Im-3 m titania thin film. The mesostructural ordering is strongly dependent on the aging condition after the spin-coating. The aging condition under low temperature and low humidity is found as an optimum condition for achieving highly ordered mesostructure in titania thin films. The effects of other important synthetic parameters, such as pH of the precursor solutions and aging periods, on the mesostructural ordering are carefully examined. After the calcination, continuous mesoporous films with partially crystallized frameworks are formed without any cracks. The mesostructure of the calcined films is formed by thermal shrinkage of the original Im-3 m mesostructure. The mesostructural change in the films calcined at various temperatures are studied by using the grazing-incidence small-angle X-ray scattering (GI-SAXS). The GI-SAXS patterns show the strong shrinkage along the perpendicular direction to the substrate by increasing the calcination temperature.     

缓冲溶液中制备掺杂高度隔离铁物种的介孔氧化硅(英文)

使用P123作为模板剂,采用不同的硅源(正硅酸甲酯,正硅酸乙酯,硅酸钠)在弱酸性的条件下(pH=4.4,乙酸-乙酸钠缓冲溶液)合成掺杂铁的介孔氧化硅材料.正硅酸甲酯和硅酸钠形成有序的二维六方相的介孔结构,而正硅酸乙酯形成了囊泡结构.紫外可见漫反射光谱和紫外共振拉曼光谱表明,在环境友好的条件下,采用硝酸铁和硅酸钠可以合成出高度隔离的铁物种.缓冲溶液提供了一条便捷的途径,通过简单改变硅源来控制介孔结构.掺杂铁的介孔氧化硅材料在苯酚的羟化反应中表现出优异的催化性能,主要由于铁物种高度分散在氧化硅载体上,介孔结构使铁活性位更易于接近反应物分子.     

Effect of tin addition on mesoporous silica thin film and its application for surface photovoltage NO2 gas sensor

Self-ordered and structure-controlled transparent films of tin-modified mesoporous silica (Sn/Si ratio of 0.5-3%) were first prepared using a molecule surfactant template method employing spin coating. A surface photovoltage (SPV) NO(2) gas sensor was then fabricated using these self-ordered tin-modified mesoporous silica thin films based on a metal-insulator-semiconductor structure. Highly sensitive tin-modified mesoporous silica was obtained that could detect NO(2) gas concentrations of as low as 300 ppb at room temperature. The detection mechanism for NO(2) is believed to involve both the surface area, which contributes to the change in dielectric constant, and the amount of tin incorporated, which contributes to the change in charge. It was found that, in this SPV sensor, the optimal Sn/Si ratio of 0.5% delivered record-high sensing performance.     

Synthesis and Characterization of Mesoporous Titania Particles and Thin Films

Well-organized mesoporous titania particles and thin films were successfully synthesized by using tetrabutyl titanate as the inorganic precursor and triblock copolymer （Pluronic P123） as the template via evaporationinduced self-assembly process. The resulting materials were characterized by high resolution transmission electron microscopy （HRTEM）, X-ray diffraction （XRD）. Fourier-transform infrared spectroscopy （FT-IR）,Brunauer-Emmett-Teller （BET） and atomic force microscopy （AFM）. Macro shape of mesoporous titania would greatly influence the mesostructure of materials, and the probable reasons were also discussed.     

Ordered mesoporous silicon through magnesium reduction of polymer templated silica thin films

This paper describes the process of making ordered mesoporous silicon (Si) thin films. The process begins with mesoporous silica (SiO 2) thin films that are produced via evaporation induced self-assembly (EISA) using sol-gel silica precursors with a diblock copolymer template. This results in a film with a cubic lattice of 15 nm diameter pores and 10 nm thick walls. The silicon is produced through reduction of the silica thin films in a magnesium (Mg) vapor at 675 degrees C. Magnesium reduction preserves the ordered pore-solid architecture but replaces the dense silica walls with 10-17 nm silicon crystallites. The resulting porous silicon films are characterized by a combination of low and high angle X-ray diffraction, combined with direct SEM imaging. The result is a straightforward route to the production of ordered nanoporous silicon.