Seed-mediated synthesis of branched gold nanoparticles with the assistance of citrate and their surface-enhanced Raman scattering properties

We report an easy synthesis of highly branched gold particles through a seed-mediated growth approach in the presence of citrate. The addition of citrate in the growth solution is found to be crucial for the formation of these branched gold particles. Their size can be varied from 47 to 185?nm. The length of the thumb-like branch is estimated to be between about 5 and 20?nm, and changes slightly as the particle size increases. Owing to these obtuse and short branches, their surface plasmon resonance displays a marked red-shift with respect to the normal spherical particles. These branched gold particles exhibit stronger SERS activity than the non-branched ones, which is most likely related to these unique branching features.     

Hydrothermal synthesis of surface-modified iron oxide nanoparticles

We synthesized surface-modified iron oxide nanoparticles in aqueous phase by heating an aqueous solution of iron sulfate (FeSO₄) at 473 K with a small amount of either n-decanoic acid (C₉H₁₉COOH) or n-decylamine (C₁₀H₂₁NH₂), which is not miscible with water at room temperature. Transmission electron microscopy showed that the addition of n-decanoic acid or decylamine changed the shape of the obtained nanoparticles. X-ray diffraction spectra revealed that the synthesized nanoparticles were in α-Fe₂O₃ or Fe₃O₄ phase while Fourier transform infrared spectroscopy and thermogravimetry indicated the existence of an organic layer on the surface of the nanoparticles. In the synthetic condition, decreased dielectric constant of water at higher temperature increased the solubility of n-decanoic acid or n-decylamine in water to promote the reaction between the surface of iron oxide nanoparticles and the organic reagents. After the synthesis, the used organic modifiers separated from the aqueous phase at room temperature, which may help the environmentally benign synthesis of surface-modified metal oxide nanoparticles.     

Synthesis of monodisperse iron oxide and iron/iron oxide core/shell nanoparticles via iron-oleylamine complex

Monodisperse magnetic nanoparticles are of great scientific and technical interests. This paper reports a single-step synthesis of monodisperse magnetite nanoparticles with particle size of 8 nm. Iron/maghaemite core/shell nanoparticles with particle size of 11 nm were obtained by reducing the concentration of oleylamine. TEM and in-situ FTIR results suggested that iron-oleylamine intermediate was generated in-situ and decomposed at higher temperature. Oleylamine was also found on the surface of nanoparticles, indicating its role as capping agent which provided steric protection of as-synthesized nanoparticles from agglomeration. Both magnetite and iron/maghaemite core/shell nanoparticles were superparamagnetic at room temperature with a blocking temperature at 80 K and 67 K, respectively.     

Facile synthesis of magnetic iron oxide nanoparticles and their characterization

Magnetic iron oxide nanoparticles are synthesized by suitable modification of the standard synthetic procedure without use of inert atmosphere and at room temperature. The facile synthesis procedure can be easily scaled up and is of important from industrial point of view for the commercial large scale production of magnetic iron oxide nanoparticles. The synthesized nanoparticles were characterized by thermal, dynamic light scattering, scanning electron microscopy and transmission electron microscopy analyses.     

Preparation of iron oxide nanoparticles by microwave synthesis and their characterization

In this study production of fine particle Fe2O3 via microwave processing of Fe(NO3)3.nH2O followed by low temperature annealing was reported. XRD was used to characterize the structural properties of nanoparticles. Approximate particle sizes were between 3-13 nm according to Scherrer's equation. Single point BET measurement results also show that samples have large surface area and they are nanometer sized particles. TEM study was conducted to examine the structure of the nanoparticles. TEM figure is in good agreement with the results obtained from Scherrer's equation using XRD spectra. In order to characterize the magnetic properties of the nanoparticles VSM (Vibrating Sample Magnetometer) was used. From these results it can be concluded that the sample containing only maghemite phase exhibits superparamagnetic behaviour, on the other hand sample containing both hematite and maghemite phases shows paramagnetic behaviour above 300 K, superparamagnetic behavior at lower temperatures.     

One-pot size and shape controlled synthesis of DMSO capped iron oxide nanoparticles

We report here the capping of iron oxide nanoparticles with dimethyl sulfoxide (DMSO) to make chloroform soluble iron oxide nanoparticles. Size and shape of the capped iron oxide nanoparticles are well controlled by simply varying the reaction parameters. The synthesized nanocrystallites were characterized by thermal analysis (TG-DTA), powder X-ray diffraction (XRD), transmission electron microscopy (TEM) for evaluating phase, structure and morphology. ¹H NMR spectra of the synthesized samples confirm DMSO, and the capping of DMSO on the ferrite samples. Shift of the S=O stretching frequency in Fourier transformed infra-red (FTIR) spectra indicates that the bonding between DMSO and ferrite is through an oxygen moiety. The magnetic measurements of all the synthesized samples were investigated with a SQUID magnetometer which shows that the magnetic properties are strongly dependent on the size as well as shape of the iron oxide.     

A simple synthesis of amine-derivatised superparamagnetic iron oxide nanoparticles for bioapplications

Adsorption of 3-aminopropyltriethoxysilane (APTS) on magnetite nanoparticles during its formation has been investigated to optimise the preparation of stable aqueous dispersion of amine derivatised magnetite nanoparticles. APTS adsorbs chemically on the surface of magnetite particle modifying its surface which is evident from thermal and C, H, N analysis. The variation of particle size has been observed with change of APTS concentration. X-ray diffractogram shows the formation of pure inverse spinel phase magnetite with average crystallite size 7 nm when equimolar (Fe₃O₄: APTS = 1:1) quantity of APTS was used during its synthesis. The presence of free surface –NH₂ groups and Fe–O–Si bonds was observed by FTIR. Raman spectrum further confirms the presence of surface –NH₂ groups. Transmission electron microscopy shows formation of particles of average size between 7 nm and 12 nm. The effective hydrodynamic diameter of the APTS coated particle agglomerates is 45.8 nm in stable aqueous colloidal dispersion, which is evident from photon correlation spectroscopy. VSM measurements at room temperature of both silanised and unsilanised magnetite shows their superparamagnetic nature with saturation magnetisation 41 e.m.u/g and 56 e.m.u/g, respectively. Avidin has been immobilised on the surface through glutaraldehyde, which demonstrates the possibility of the synthesised material to be used in protein immobilisation to form bioactive magnetic particles.     

Multifunctional iron and iron oxide nanoparticles in silica

Iron and iron oxide nanoparticles in silica layers deposited by sol–gel techniques on Si wafers were formed and studied. It was shown that multifunctional nanoparticles of different iron oxides possessing various physical properties can be fabricated by means of post-growth annealing of (SiO₂:Fe)/SiO₂/Si samples in various atmospheres. The hematite, maghemite, and iron nanoparticles were found to be dominant upon annealing the samples in air, argon, and hydrogen atmosphere, respectively. The physical properties of produced hybrid structures were studied by Raman and FT-IR spectroscopy, spectroscopic ellipsometry, AFM, and magnetic measurements. The sol–gel technique with subsequent annealing procedure is demonstrated to be an effective method for the formation of multifunctional hybrid structures composed of iron or iron oxide nanoparticles in silica matrix.     

Bacterial synthesis of copper/copper oxide nanoparticles

A bacterial mediated synthesis of copper/copper oxide nanoparticle composite is reported. A Gram-negative bacterium belonging to the genus Serratia was isolated from the midgut of Stibara sp., an insect of the Cerambycidae family of beetles found in the Northwestern Ghats of India. This is a unique bacterium that is quite specific for the synthesis of copper oxide nanoparticles as several other strains isolated from the same insect and common Indian mosquitoes did not result in nanoparticle formation. By following the reaction systematically, we could delineate that the nanoparticle formation occurs intracellularly. However, the process results in the killing of bacterial cells. Subsequently the nanoparticles leak out as the cell wall disintegrates. The nanoparticles formed are thoroughly characterized by UV-Vis, TEM, XRD, XPS and FTIR studies.     

Nitric oxide donor superparamagnetic iron oxide nanoparticles

This work reports a new strategy for delivering nitric oxide (NO), based on magnetic nanoparticles (MNPs), with great potential for biomedical applications. Water-soluble magnetic nanoparticles were prepared through a co-precipitation method by using ferrous and ferric chlorides in acidic solution, followed by a mercaptosuccinic acid (MSA) coating. The thiolated nanoparticles (SH-NPs) were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and vibrating sample magnetometry (VSM). The results showed that the SH-NPs have a mean diameter of 10 nm and display superparamagnetic behavior at room temperature. Free thiol groups on the magnetite surface were nitrosated through the addition of an acidified nitrite solution, yielding nitrosated magnetic nanoparticles (SNO-NPs). The amount of NO covalently bound to the nanoparticles surface was evaluated by chemiluminescense. The SNO-NPs spontaneously released NO in aqueous solution at levels required for biomedical applications. This new magnetic NO-delivery vehicle has a great potential to generate desired amounts of NO directed to the target location.     

Facile synthesis of porous hollow iron oxide nanoparticles supported on carbon nanotubes

Porous hollow iron oxide nanoparticles (PHNPs) supported on carbon nanotubes (CNTs) were facilely synthesized by etching Fe@Fe_xO_y/CNT with dilute nitric acid aqueous solution at ambient temperature without the assistance of any surfactants and ligands. The mean diameter of hollow iron oxide nanoparticles was about 17 nm, with a wall thickness of about 4 nm. The formation mechanism of PHNPs is discussed based on the characterization results from TEM, XRD and H₂-TPR. The combination of nanoscale Kirkendall effect and selective acid etching is proposed to be responsible for the formation of CNT supported PHNPs, through a transformation from core/void/shell structures to hollow nanoparticles.     

Rapid microwave-assisted synthesis of dextran-coated iron oxide nanoparticles for magnetic resonance imaging

Currently, magnetic iron oxide nanoparticles are the only nanosized magnetic resonance imaging (MRI) contrast agents approved for clinical use, yet commercial manufacturing of these agents has been limited or discontinued. Though there is still widespread demand for these particles both for clinical use and research, they are difficult to obtain commercially, and complicated syntheses make in-house preparation unfeasible for most biological research labs or clinics. To make commercial production viable and increase accessibility of these products, it is crucial to develop simple, rapid and reproducible preparations of biocompatible iron oxide nanoparticles. Here, we report a rapid, straightforward microwave-assisted synthesis of superparamagnetic dextran-coated iron oxide nanoparticles. The nanoparticles were produced in two hydrodynamic sizes with differing core morphologies by varying the synthetic method as either a two-step or single-step process. A striking benefit of these methods is the ability to obtain swift and consistent results without the necessity for air-, pH- or temperature-sensitive techniques; therefore, reaction times and complex manufacturing processes are greatly reduced as compared to conventional synthetic methods. This is a great benefit for cost-effective translation to commercial production. The nanoparticles are found to be superparamagnetic and exhibit properties consistent for use in MRI. In addition, the dextran coating imparts the water solubility and biocompatibility necessary for in vivo utilization.     

Electrochemical synthesis of gold nanoparticles onto indium tin oxide glass and application in biosensors

A simple one-step method for the electrochemical deposition of gold nanoparticles (GNPs) onto bare indium tin oxide film coated glass substrate without any template or surfactant was investigated. The effect of electrolysis conditions such as potential range, temperature, concentration and deposition cycles were examined. The connectivity of GNPs was analyzed by UV-Vis absorption spectroscopy and scanning electron microscopy. The nanoparticles were found to connect in pairs or to coalesce in larger numbers. The twin GNPs display a transverse and a longitudinal localized surface plasmon resonance (LSPR) band, which is similar to that of gold nanorods. The presence of longitudinal LSPR band correlates with high refractive index sensitivity. Conjugation of the twin-linked GNPs with albumin bovine serum-biotin was employed for the detection of streptavidin as a model based on the specific binding affinity in biotin/streptavidin pairs. The spectrophotometric sensor showed concentration-dependent binding for streptavidin.     

Gold and magnetic oxide/gold core/shell nanoparticles as bio-functional nanoprobes

The ability to create bio-functional nanoprobes for the detection of biological reactivity is important for developing bioassay and diagnostic methods. This paper describes the findings of an investigation of the surface functionalization of gold (Au) and magnetic nanoparticles coated with gold shells (M/Au) by proteins and spectroscopic labels for the creation of nanoprobes for use in surface enhanced Raman scattering (SERS) assays. Highly monodispersed Au nanoparticles and M/Au nanoparticles with two types of magnetic nanoparticle cores (Fe(2)O(3) and MnZn ferrite) were studied as model systems for the bio-functionalization and Raman labeling. Comparison of the SERS intensities obtained with different particle sizes (30-100?nm) and samples in solution versus on solid substrates have revealed important information about the manipulation of the SERS signals. In contrast to the salt-induced uncontrollable and irreversible aggregation of nanoparticles, the ability to use a centrifugation method to control the formation of stable small clustering sizes of nanoparticles was shown to enhance SERS intensities for samples in solution as compared with samples on solid substrates. A simple method for labeling protein-capped Au nanoparticles with Raman-active molecules was also described. The functionalized Au and M/Au nanoparticles are shown to exhibit the desired functional properties for the detection of SERS signals in the magnetically separated reaction products. These results are discussed in terms of the interparticle distance dependence of 'hot-spot' SERS sites and the delineation of the parameters for controlling the core-shell reactivity of the magnetic functional nanocomposite materials in bio-separation and spectroscopic probing.     

Phospholipid-assisted synthesis of size-controlled gold nanoparticles

Morphology and size control of gold nanoparticles (AuNPs) by phospholipids (PLs) has been reported. It was found that gold entities could form nanostructures with different sizes controlled by PLs in an aqueous solution. During the preparation of 1.5 nm gold seeds, AuNPs were obtained from the reduction of gold complex by sodium borohydride and capped by citrate for stabilization. With the different ratios between seed solution and growth solution, which was composed by gold complex and PLs, gold seeds grew into larger nanoparticles step by step until enough large size up to 30 nm. The main discovery of this work is that common biomolecules, such as PLs can be used to control nanoparticle size. This conclusion has been confirmed by transmission electron micrographs, particle size analysis, and UV-vis spectra.     

多糖涂覆的氧化铁纳米粒子的合成及其药物递送应用研究进展

近年来,氧化铁纳米粒子(Iron Oxide Nanoparticles,IONPs)由于具有超顺磁性、生物相容性、比表面积大、易分离等特点而备受科学界关注.然而,裸露的IONPs容易聚集和氧化而失去其应有的特性,采用多糖进行涂覆不仅能提高IONPs的稳定性和生物相容性,还能通过多糖与其他生物活性物质结合,赋予INOPs新的功能.多糖涂覆的IONPs充分结合了多糖的生化特性与磁芯的理化特性,在药物递送中展现出巨大的应用潜力.本文综述了多糖涂覆IONPs的合成方法、合成过程的影响因素、多糖与IONPs的结合机理及其在药物递送中的应用,最后对多糖涂覆的IONPs的合成及其在药物递送方面的应用进行了总结和展望.     

Photochemical synthesis of colloidal gold nanoparticles

Monodisperse gold nanoparticles protected by small organic molecules or by macromolecules with different sizes and shapes are widely used as a precursor material in various applications of gold nanotechnology. However, their preparation is still a formidable task. In this paper the use of photochemically assisted syntheses of monodisperse gold nanoparticles is summarized and some preparations by the authors’ group are introduced. These include spherical and rod-like particles, bimetallic composite nanoparticles, and syntheses using complex intramolecular photoreduction to generate the reducing agent.     

Structure control synthesis of iron oxide polymorph nanoparticles through an epoxide precipitation route

Iron oxide polymorph nanoparticles (magnetite, goethite and lepidocrocite) were synthesised through a novel epoxide precipitation route. Epoxide, as a precipitating agent, induced the precipitation of iron(II) ions in the form of hydroxide through its reaction with aquocomplexes of Fe²⁺ ions. The organic intermediate, which was produced from the ring-opening reaction of epoxide, functionalised the surface of the formed precipitate in situ, resulting in the minimisation of the nanoparticles’ aggregation. Another advantage of this route is its simple procedure for the preparation of iron oxide nanoparticles with different structures and their well-defined morphology. Magnetite, goethite and lepidocrocite nanoparticles were obtained just by the pH regulation and air oxidation at room temperature.     

Synthesis and characterization of multifunctional iron oxide nanoparticles

In order to get high water solubility, monodisperse, superparamagnetic nanoparticles, poly (acrylic acid) was employed to modify Fe3O4 by a high-temperature solution-phase hydrolysis approach. Then, folic acid (FA) and fluorescein isothiocyanate were successively conjugated with prepared magnetic nanoparticles (MNPs). The functional MNPs were characterized by X-ray diffraction (XRD), dynamic light scattering (DLS), transmission electron microscope (TEM), inductively coupled plasma-atomic emission spectrometer (ICP-AES), and vibrating sample magnetometer (VSM), respectively. The toxicity of the materials was evaluated by selecting NIH/3T3 fibroblast cells and no toxic effect was observed. The fluorescent imaging and targeting property of the MNPs were also realized in vitro and in vivo experiments by confocal laser scanning microscopy (CLSM) and Kodak In-Vivo FX Professional Imaging System, respectively. The results indicated that the final products exhibited interesting magnetic, optical and targeting properties for further potential applications in biological and biomedical fields.