Placental restriction alters adrenal medullary development in the midgestation sheep fetus

This is a retrospective study of 10 patients with combined cruciate ligament and posterolateral instability who underwent surgical reconstruction between 1991 and 1994. All knees had at least 20 degrees increased external rotation at 30 degrees of knee flexion and from 1+ to 3+ varus instability. Five knees with posterior cruciate ligament ruptures had at least a 2+ Lachman test result. (One knee had both anterior and posterior cruciate ligament injuries). In all cases the lateral collateral ligament was reconstructed with a bone-patellar tendon-bone allograft secured with interference screws. Fixation tunnels were placed in the fibular head and at the isometric point on the femur. The cruciate ligaments were reconstructed with autograft or allograft material. The average follow-up was 28 months. Excessive external rotation at 30 degrees of flexion was corrected in all but one knee. Six patients had no varus laxity, and four patients had 1+ varus laxity at 30 degrees of flexion. The posterior drawer test result decreased, on average, to 1+, and the Lachman test result decreased to between 0 and 1+. The average Tegner score was 4.6, with five patients returning to their preinjury level of activity and four returning to one level lower. These results indicate that this is a promising new procedure for patients with instability resulting from lateral ligament injuries of the knee.     

The role of the cruciate and posterolateral ligaments in stability of the knee. A biomechanical study

The role of the posterolateral and cruciate ligaments in restraining knee motion was studied in 11 human cadaveric knees. The posterolateral ligaments sectioned included the lateral collateral and arcuate ligaments, the popliteofibular ligament, and the popliteal tendon attachment to the tibia. Combined sectioning of the anterior cruciate and posterolateral ligaments resulted in maximal increases in primary anterior and posterior translations at 30 degrees of knee flexion. Primary varus, primary internal, and coupled external rotation also increased and were maximal at 30 degrees of knee flexion. Combined sectioning of the posterior cruciate and posterolateral ligaments resulted in increased primary posterior translation, primary varus and external rotation, and coupled external rotation at all angles of knee flexion. Examination of the knee at 30 degrees and 90 degrees of knee flexion can discriminate between combined posterior cruciate ligament and posterolateral injury and isolated posterolateral injury. The standard external rotation test performed at 30 degrees of knee flexion may not be routinely reliable for detecting combined anterior cruciate and posterolateral ligament injury. However, measurements of primary anterior-posterior translation, primary varus rotation, and coupled external rotation may be used to detect combined anterior cruciate and posterolateral ligament injury.     

The anterior cruciate ligament in controlling axial rotation. An evaluation of its effect

Changes in axial tibial rotation after anterior cruciate ligament sectioning were evaluated in 14 fresh human knee joints. Simulation of vertical stance in a quadriceps-stabilized knee was performed. Internal and external rotational torques were applied before and after anterior cruciate ligament sectioning. Pivot shift tests were done in the intact and anterior cruciate ligament sectioned knee. Results of pivot shift tests were all negative before sectioning and positive after isolated sectioning. No significant change in axial rotation occurred between the intact and sectioned knee for external rotation (P = 0.24) or internal rotation (P = 0.12). Presence of a load at the femoral housing in both the intact and ligament-sectioned knees caused a significant change in external rotation (P < 0.0001). No significant change was noted in internal rotation between loaded and unloaded states (P = 0.70). Total tibial rotation in the intact knee was noted to vary between 31 degrees at 0 degree of flexion and 42 degrees at 60 degrees of flexion. These results suggest that the anterior cruciate ligament does not play a significant role in limiting axial rotation and that rotational instability is not a major factor after isolated anterior cruciate ligament rupture.     

Non-alcoholic duct destructive chronic pancreatitis

Contact between an anterior cruciate ligament graft and the intercondylar roof has been termed roof impingement. Grafts with impingement sustain permanent damage, and if the injury is extensive enough, then the graft may fail, causing recurrent instability. This study evaluated two mechanical factors that could be responsible for the graft injury associated with roof impingement: an increase in graft tension or elevated pressures between the graft and the roof, or both. An anterior cruciate ligament reconstruction was performed using an Achilles tendon graft in five fresh-frozen cadaveric knees. Using a six-degree-of-freedom load application system, the anterior displacement of the knee with the native anterior cruciate ligament was restored in the reconstructed knee at a flexion angle of 30 degrees and with an anterior force of 200 N applied. Pressure between the graft and intercondylar roof, graft tension, and flexion angle were measured during passive knee extension for three tibial tunnel placements (anterior, center, and posterior). Intercondylar roof impingement increased the contact pressure between the graft and the roof but had no significant effect on graft tension. Therefore, during passive knee extension, the contact pressure between the anterior cruciate ligament graft and the intercondylar roof is a more likely cause of graft damage than increased graft tension.     

The murine buccal mucosa is an inductive site for priming class I-restricted CD8+ effector T cells in vivo

An isometer, a highly compliant spring-scale device for measuring suture displacement, has been used intraoperatively by surgeons to select the optimal placement of the femoral tunnel for an anterior cruciate ligament graft. The isometer measures the displacement of a suture centered in a tibial tunnel and attached to an intraarticular location on the femur before the femoral tunnel is drilled. Because the placement of the femoral tunnel strongly impacts the tensile behavior of an anterior cruciate ligament graft and because surgeons have used the amount of suture displacement to guide the placement of the femoral tunnel, the objective of this study was to determine the ability of an isometer to predict graft tension. In 14 patients undergoing reconstructive surgery of the anterior cruciate ligament, an isometer was used to measure suture displacement during passive knee motion for a provisional femoral tunnel location. An electrogoniometer recorded the flexion angle of the knee. The femoral tunnel was drilled. A double-looped semitendinosus and gracilis autograft was inserted around a post in the femoral tunnel, and the tension in the four limbs of the graft exiting the tibial tunnel was measured during passive knee motion. Graft-tension versus knee-flexion-angle curves revealed that each knee exhibited one of two distinct curve shapes: L-shaped, characterized by the maximum tension occurring at full extension and a nearly flat profile from 35 to 90 degrees of flexion, or U-shaped, with elevated tensions at 80-90 degrees of flexion (p < 0.001) reaching at least half of the tension in full extension. Because the shapes of the suture-displacement versus flexion-angle curves were more consistently L-shaped, the intraoperative measurement of suture displacement was not a useful predictor of either the increase in tension in the graft with flexion or the maximum tension in the graft.     

Injuries of the medial collateral ligament and anterior cruciate ligament of the knee joint and Lemaire surgical functional treatment. Long-term outcome

The present paper reports the results of 112 extraarticular ligamento-plasties performed on the knee with the procedure proposed by Lemaire. The series includes isolated tears of the anterior cruciate and medical collateral ligament as well as combined tears of both ligaments. The clinical and radiological results with a mean follow-up time of 11.5 years are compared with the results obtained in a first assessment 8 years ago. Good clinical results are in contrast with increasing osteoarthrosis in 1/3 of the knees radiologically assessed. The operation for a torn anterior cruciate ligament should be performed as soon as possible to avoid secondary meniscal lesions with subsequent severe osteoarthrosis. Presence or absence of arthrotic signs in the X-rays mainly determine the long-term result after ligamento-plasties of the knee. The Lemaire plasties are well tolerated even by elderly still active people and need little postoperative care.     

Anterior cruciate ligament graft fixation. Initial comparison of patellar tendon and semitendinosus autografts in young fresh cadavers

The initial biomechanical properties of semitendinosus and patellar tendon autografts and their fixation strengths were investigated. Twenty fresh cadaveric knees from donors under 42 years of age were used in the study. After removing all soft tissues other than the anterior cruciate ligament, we determined the ultimate tensile strength (2195 +/- 427 N) and stiffness (306 +/- 80 N/mm) of the anterior cruciate ligament in nine knees. In six knees, anterior cruciate ligaments were reconstructed using an autologous patellar tendon graft with proximal and distal interference fit screws; this resulted in an ultimate tensile strength of 416 +/- 66 N. Five knees were reconstructed with quadruple-stranded (double-looped) semitendinosus tendons fixed proximally by a titanium button and braided tape and distally by tibial post screw. This resulted in an ultimate tensile strength of 612 +/- 73 N, which was significantly higher than the strength in the patellar tendon group. Graft stiffness did not differ between the groups and was 47 +/- 19 N/mm (N = 11). This study demonstrates that the reconstructed knees had only 20% to 30% of the ultimate tensile strength of the normal anterior cruciate ligament. In summary, the semitendinosus reconstruction using a button for proximal fixation is, at the time of surgery, approximately 50% stronger than patellar tendon reconstructions with similar stiffness.     

Haptoglobin polymorphism, iron metabolism and mortality in HIV infection

Simultaneous ACL and PCL ruptures are rare but serious injuries resulting in distinct instability of the knee joint followed by an early degenerative arthritis. This combined trauma, which is often accompanied by additional ligament lesions, originates from a knee dislocation. While the conservative treatment of this complex instability is abandoned, the operative procedures are not yet standardised. The timing of the cruciate ligament reconstruction depends on the additional injuries, but generally the postprimary treatment is performed. Autografts and allografts, which can be also combined, are available for the reconstruction of the cruciate ligaments. The arthroscopic assisted operation starts with the drilling of all tibial and femoral tunnels using standard ACL and PCL arthroscopic instruments. The PCL is positioned after the graft has been transported into the joint through an anterolateral port, the ACL graft is positioned through the tibial drill hole and both are anchored first on the femoral and then on the tibial site i.e. with interference screws. In the postoperative rehabilitation neither immobilisation nor brace are used and progressive range of motion is allowed. The arthroscopic assisted reconstructions of the ACL and increasingly of the PCL are becoming standard procedures, but the technically difficult combined ACL/PCL reconstruction is restricted to a small number of arthroscopists. The first clinical results demonstrate, that the arthroscopic operation is comparable to the open reconstruction.     

Anterior knee laxity and loss of extension after anterior cruciate ligament injury

This study was performed to examine the relationship between knee extension loss and the length of time after injury. We also wanted to compare anterior laxity in anterior cruciate ligament-injured knees in the early and late stages of injury. Loss of knee extension was measured in 81 patients with anterior cruciate ligament injury using lateral radiography with the injured leg relaxed and elevated. Extension loss was defined as the difference in maximal extension angle between the injured and uninjured knees. Average loss of extension was 3.6 degrees in the 17 knees in which the anterior cruciate ligament had been torn 3 weeks or less before examination (the acute injury group) and 0.6 degree in the 64 knees in which the anterior cruciate ligament had been torn more than 3 weeks before examination (the chronic injury group). The extension loss in the acutely injured knees was significantly greater compared with that in the uninjured knees and in the chronically injured knees. Arthrometric measurements using the KT-1000 arthrometer were reliable to diagnose an acute tear. There was no correlation between the degree of extension loss and arthrometric anterior knee laxity measurements. In 12 patients, the initial extension deficit in the early stage of injury significantly resolved with time, and manual maximum arthrometric measurements of anterior knee laxity improved spontaneously with time.     

In situ calibration of miniature sensors implanted into the anterior cruciate ligament part I: strain measurements

The goals of this study were to (a) evaluate the differential variable reluctance transducer as an instrument for measuring tissue strain in the anteromedial band of the anterior cruciate ligament, (b) develop a series of calibration curves (for simple states of knee loading) from which resultant force in the ligament could be estimated from measured strain levels in the anteromedial band of the ligament, and (c) study the effects of knee flexion angle and mode of applied loading on output from the transducer. Thirteen fresh-frozen cadaveric knee specimens underwent mechanical isolation of a bone cap containing the tibial insertion of the anterior cruciate ligament and attachment of a load cell to measure resultant force in the ligament. The transducer (with barbed prongs) was inserted into the anteromedial band of the anterior cruciate ligament to record local elongation of the instrumented fibers as resultant force was generated in the ligament. A series of calibration curves (anteromedial bundle strain versus resultant force in the anterior cruciate ligament) were determined at selected knee flexion angles as external loads were applied to the knee. During passive knee extension, strain readings did not always follow the pattern of resultant force in the ligament; erratic strain readings were often measured beyond 20 degrees of flexion, where the anteromedial band was slack. For anterior tibial loading, the anteromedial band was a more active contributor to resultant ligament force beyond 45 degrees of flexion and was less active near full extension; mean resultant forces in the range of 150-200 N produced strain levels on the order of 3-4%. The anteromedial band was also active during application of internal tibial torque; mean resultant forces on the order of 180-220 N produced strains on the order of 2%. Resultant forces generated by varus moment were relatively low, and the anteromedial band was not always strained. Mean coefficients of variation for resultant force in the ligament (five repeated measurements) ranged between 0.038 and 0.111. Mean coefficients of variation for five repeated placements of the strain transducer in the same site ranged from 0.209 to 0.342. Insertion and removal of this transducer at the anteromedial band produced observable damage to the ligament. In our study, repeatable measurements were possible only if both prongs of the transducer were sutured to the ligament fibers.     

Roofplasty requirements in vitro for different tibial hole placements in anterior cruciate ligament reconstruction

In this study we sought both to quantify the forces that result in anterior cruciate ligament graft impingement and the amount of roofplasty necessary to prevent it. The perpendicular force of the intercondylar roof against an anterior cruciate ligament graft was measured in seven fresh-frozen cadaveric knees. Two tibial hole placements were evaluated: an anterior/eccentric hole (26.6% +/- 3.1% of the sagittal depth) and a customized hole aligned 4 to 5 mm posterior and parallel to the slope of the intercondylar roof in the extended knee (42.0% +/- 2.6% of the sagittal depth). A transducer that measured the contact force with the graft was implanted in the roof. An extensive roofplasty was performed so that the sensor would bear all of the roof force. Graft tension was also measured. Extension moments were applied to 20 N-m with a six degree of freedom load application system. Load cycles were repeated with the roof force sensor backed out in 0.8 mm increments. The sensor backout represented a corresponding amount of bone removal in a roofplasty. The flexion angle at roof-graft contact was consistently greater using the anterior tibial hole than the customized one. This held true for all increments of sensor backout. With the anterior hole, the roof sensor (no backout) contacted the graft at 12.8 degrees +/- 6.7 degrees of flexion, whereas the customized hole resulted in contact at 4.1 degrees +/- 4.2 degrees (P = 0.020).(ABSTRACT TRUNCATED AT 250 WORDS)     

Anterior cruciate ligament reconstruction. The effect of tibial tunnel placement on range of motion

In 111 patients who had anterior cruciate ligament reconstructions, postoperative radiographic measurements of anterior to posterior and medial to lateral location of the tibial tunnels were correlated with the final range of motion achieved. In the 25 patients with extension deficits of 10 degrees or more, placement of the tibial tunnel was more anterior (average, anterior 23% of the tibia) than in the remaining 86 patients with extension deficits of < 10 degrees (average, anterior 29% of tibia). This difference was statistically significant with P < 0.001. Logistic regression analysis revealed that the more anterior the placement of the tibial tunnel, the greater the loss of both flexion (P = 0.01) and extension (P = 0.002). In the 21 patients with full extension but flexion < 130 degrees, placement of the tibial tunnel tended to be more medial (average, medial 40% of the tibia) than in the 65 patients without flexion deficit (average, medial 45% of the tibia). We conclude that placement of the tibial tunnel in the "eccentric," anteromedial position may contribute to the development of flexion and extension deficits after anterior cruciate ligament reconstruction.     

Intraarticular anatomic variants associated with discoid meniscus in Koreans

From July 1990 through June 1994, 106 knees (102 patients) were treated for discoid meniscus. Fifteen knees (15 patients) were associated with other intraarticular anatomic variants. There were eight knees (8 patients) with anomalous insertion of the anterior horn of the medial meniscus into the anterior cruciate ligament, and seven knees (7 patients) with anterior expansion of the anterior portion of the anterior cruciate ligament below the anterior tibial margin. Among the latter, one patient also had anterior transposition of the anterior insertion of the medial meniscus, while obliteration of the popliteal hiatus was seen in another patient. The discoid menisci were reshaped in 13 knees (13 patients), totally resected in one knee, and in one patient the discoid meniscus was treated with repair of a peripheral tear and reshaping. Followup ranged from 24 to 54 months (average, 37 months) after surgery. The results were excellent in eight knees, good in five knees, and fair in two knees as graded using the Ikeuchi scale. These anatomic variants, other than the discoid meniscus, did not seem to be related to the patient's symptoms.     

In vivo anteroposterior femorotibial translation of total knee arthroplasty: a multicenter analysis

A study was conducted to determine in vivo femorotibial contact patterns for subjects having a posterior cruciate retaining or posterior cruciate substituting total knee arthroplasty. Femorotibial contact of 72 subjects implanted with a total knee replacement, performed by five surgeons, was analyzed using video fluoroscopy. Thirty-one subjects were implanted with a posterior cruciate retaining total knee replacement with a flat polyethylene posterior lipped insert, 12 with a posterior cruciate retaining total knee replacement with a curved insert, and 29 with a posterior cruciate substituting total knee replacement. Each subject performed successive deep knee bends to maximum flexion. Video images at 0 degree, 30 degrees, 60 degrees, and 90 degrees flexion were downloaded onto a workstation computer. Femorotibial contact paths were determined for the medial and lateral condyles using an interactive model fitting technique. Femorotibial contact anterior to the tibial midline in the sagittal plane was denoted as positive and contact posterior was denoted as negative. Analysis of average femorotibial contact pathways of both posterior cruciate retaining designs revealed posterior femorotibial contact in full extension with anterior translation of femorotibial contact commonly observed in midflexion and terminal flexion. In posterior cruciate substituting designs, anterior femoral translation was seen medially at 30 degrees to 60 degrees flexion but rarely was observed laterally. Posterior femoral rollback laterally from full extension to 90 degrees flexion was seen in 100% of subjects implanted with a posterior cruciate substituting total knee replacement, versus 51.6% (posterior lipped polyethylene insert) and 58.3% (curved insert) of those with a posterior cruciate retaining total knee replacement. Data from this multicenter study are remarkably similar to previous fluoroscopy data from a single surgeon series, showing a lack of customary posterior femoral rollback in both posterior cruciate retaining designs, and conversely showing an average anterior femoral translation with knee flexion. Posterior femoral rollback, less than in normal knees, routinely was observed in posterior cruciate substituting total knee arthroplasty, attributed to engagement of the femoral component cam with the tibial post. The abnormal anterior femoral translation observed in posterior cruciate retaining total knee arthroplasty may be a factor in premature polyethylene wear observed in retrieval studies.     

The effect of femoral tunnel position and graft tensioning technique on posterior laxity of the posterior cruciate ligament-reconstructed knee

We report the effects of femoral tunnel position and graft tensioning technique on posterior laxity of the posterior cruciate ligament-reconstructed knee. An isometric femoral tunnel site was located using a specially designed alignment jig. Additional femoral tunnel positions were located 5 mm proximal and distal to the isometric femoral tunnel. With the graft in the proximal femoral tunnel, graft tension decreased as the knee flexed; with the graft in the distal femoral tunnel, graft tension increased as the knee flexed. When the graft was placed in the isometric femoral tunnel, a nearly isometric graft tension was maintained between 0 degrees and 90 degrees of knee flexion. One technique tested was tensioning the graft at 90 degrees of knee flexion while applying an anterior drawer force of 156 N to the tibia. This technique restored statistically normal posterior stability to the posterior cruciate ligament-deficient knee between 0 degrees and 90 degrees for the distal femoral tunnel position, between 0 degrees and 75 degrees for the isometric tunnel position, and between 0 degrees and 45 degrees for the proximal tunnel position. When the graft was tensioned with the knee in full extension and without the application of an anterior drawer force, posterior translation of the reconstructed knee was significantly different from that of the intact knee between 15 degrees and 90 degrees for all femoral tunnel positions.     

The effects of graft rotation on attachment site separation distances in anterior cruciate ligament reconstruction

We created a model to see if twisting the graft in an anterior cruciate ligament reconstruction affected the distance separating the femoral and tibial attachments of the perimeter fibers of a patellar tendon graft. Graft bone plugs were simulated by two 12.5-mm diameter Delrin cylinders. Holes, 1 mm in diameter, were placed at the four corners of a centralized rectangle measuring 5 by 10 mm. Graft ligament fibers were represented by color-coded sutures passed through the holes in the modeled bone plugs. This graft model was fixed in tunnels reamed under arthroscopic guidance at the anterior cruciate ligament attachment sites of the femur and tibia in six fresh-frozen knee specimens. Spring gauges were used to measure indirectly the changes in distance of separation during knee flexion between the femoral and tibial attachments relative to a zero defined at 90 degrees of knee flexion. The tibial cylinder was rotated at 45 degrees increments from 90 degrees external to 180 degrees internal rotation relative to the femoral cylinder and measurements were repeated after each incremental rotation. External rotation resulted in a statistically significant higher mean separation distance (4.5 mm) for peripheral graft attachments than internal rotation (2.8 mm) (P = 0.05).     

Effect of partial release of the posterior cruciate ligament in total knee arthroplasty

Appropriate tension of the posterior cruciate ligament, which often is tight in deep flexion, is difficult to achieve after posterior cruciate ligament retaining total knee arthroplasty. Kinematics and maximum flexion after partial release of the posterior cruciate ligament were evaluated in this study. A partial release improved the maximum flexion angle and maintained anteroposterior stability without causing undesirable changes in kinematics, whereas full resection of the posterior cruciate ligament caused unfavorable anteroposterior instability. Partial posterior cruciate ligament release eliminated excessive rollback movement caused by a tight posterior cruciate ligament and also shifted the point of articular surface contact anteriorly. These results indicate that partial release of the posterior cruciate ligament may improve knee function in patients with a tight posterior cruciate ligament after total knee arthroplasty.     

Gonarthrosis after injury of the anterior cruciate ligament: a multicenter, long-term study

In order to estimate incidence, severity and associated factors in the development of the degenerative arthritis of the knee following a cruciate ligament injury, a multicenter, longterm follow-up study was undertaken. The time interval between injury and follow-up exam was a minimum of 15 years (range 15-52 years). Extensive physical examination and radiographic analyses from four "Knee Centers" (Hospital for Special Surgery, New York; Orthop?dische Klinik, Bruderholz; Orthopaedic and Arthritic Hospital, Toronto; Orthopaedic Department Wichita, Kansas) on 328 patients revealed that the best correlation to the degree of osteoarthritis could be found to the time of meniscectomy. All other operations (suture of cruciate ligament, intraarticular or extraarticular reconstruction) showed much less correlation to the severity of the degenerative arthritis found at the follow-up exam. In conclusion: Preservation of as much meniscus tissue as possible at the time of injury seems to be the best warranty for slowing down degenerative arthritis after cruciate ligament injury.     

Wear patterns on tibial plateaus from varus and valgus osteoarthritic knees

The size and location of articular cartilage wear was assessed on 106 varus and 37 valgus osteoarthritic tibial plateaus resected during total knee arthroplasty. Anterior cruciate ligament integrity was assessed intraoperatively, and calibrated digital images were used to measure the wear patterns. Complete anterior cruciate ligament deficiency was seen in 25% of the varus and 24% of the valgus knees. Wear patterns on anterior cruciate ligament intact and attenuated varus tibial plateaus occurred in the middle to anterior aspect of the medial plateau. Anterior cruciate ligament deficient varus plateaus had significantly larger wear areas located more posterior on the medial plateau. In contrast, anterior cruciate ligament intact and deficient valgus tibial plateaus had wear located posterior to the center of the lateral plateau. Anterior cruciate ligament integrity is a discrete feature of advanced osteoarthritis that strongly influences the articular wear patterns. The anterior cruciate ligament deficient wear patterns show a wear mechanism that is consistent with the posterior femoral subluxation and posterior tibiofemoral contact observed after acute anterior cruciate ligament rupture. These observations provide insight into the altered knee mechanics that exist in osteoarthritic knees and the resulting mechanical factors that contribute to degenerative changes.     

In vivo determination of patello-femoral separation and linear impulse forces

Problems associated with the patellofemoral joint account for nearly half of all total knee arthroplasty (TKA) revisions. Under in vivo conditions, we previously determined that TKA subjects experience patellofemoral separation while performing dynamic, weight-bearing activities. This study investigates the impulse loading conditions that may exist at the time the patella impacts the femur during knee flexion. Fifty-seven subjects (68 knees) performed three successive deep knee bends under fluoroscopic surveillance. Eleven subjects (14 knees) had a posterior cruciate retaining (PCR) TKA, 19 subjects (25 knees) had a posterior cruciate substituting (PS) TKA, 15 subjects (17 knees) had a normal knee, and 12 subjects (12 knees) had an anterior cruciate ligament deficient (ACLD) knee. Velocities of each subjects' patella relative to a fixed point on the tibia were used as input to a mathematical model incorporating the impulse-momentum equation. At full extension, 12 of 14 PCR knees, 11 of 25 PS knees, 1 of 12 ACLD knees, and none of the 17 normal knees exhibited patellofemoral joint separation. The maximum separation, detected in a PCR knee, was 12 mm. The relative force determined upon patellofemoral impact was minimal (1.0 N). Simulated walking conditions for each subject were then entered into the mathematical model at a rate of 100 Hz and the calculated patellofemoral impact forces ranged from 78 N to 213 N. Since impulse loading conditions occur over a very small period of time, it was concluded that capturing fluoroscopy images at a rate of 30 Hz was too slow. Under simulated walking conditions, the impact forces due to impulse loading could contribute to polyethylene failure if these conditions induce fatigue of the polyethylene.