聚甲撑-聚乙二醇两亲性嵌段共聚物的可控合成及自组装

采用水相同源聚合方法合成链长可控的端羟基直链聚甲撑(PM-OH),然后以异佛尔酮二异氰酸酯(IPDI)为连接剂,结合偶联反应和同源聚合反应,可控合成了一系列具有不同亲疏水嵌段长度比的聚甲撑-聚乙二醇(PM-b-PEG)嵌段共聚物.以甲苯为共溶剂,水为选择性溶剂,自组装制备球型胶束.并对合成的PM-b-PEG聚合物胶束的...     

Synthesis and characterization of a novel multiblock copolyester containing poly(ethylene succinate) and poly(butylene succinate)

Multiblock copolyester (PBS-b-PES) containing poly(butylene succinate) (PBS) and poly(ethylene succinate) (PES) was successfully synthesized by chain-extension of dihydroxyl terminated PBS (HO-PBS-OH) and PES (HO-PES-OH) using 1,6-hexmethylene diisocyanate (HDI) as a chain extender. The chemical structures, molecular weights, crystallization behaviors, thermal and mechanical properties of the copolyesters were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), wide-angle X-ray diffraction (WAXD), tensile testing and hydrolytic degradation. High-molecular-weight copolyesters with M_w more than 2.0 × 10⁵ g mol⁻¹ were easily obtained through chain-extension. The copolyesters showed a single glass transition temperature (T_g) which increased with PES content. The melting point temperature (T_m) and relative degree of crystallinity (X_c) of the copolyesters decreased first and then increased with PES content. The copolyesters manifested excellent mechanical properties, for example, PBS₅-b-PES₅ had fracture stress of 61.8 MPa and fracture strain of 1173%. The chain-extension reaction provided a very effective way to produce high molecular weight multiblock copolyesters.     

Synthesis and characterization of novel biodegradable pentablock copolymers from L‐lactide,p‐dioxanone and poly (ethylene glycol)

ABCBA type pentablock copolymers, in which the A, B and C blocks are poly (p‐Dioxanone) (PPDO), poly (L‐Lactide) (PLLA), and polyethylene glycol (PEG), respectively, were synthesized via a two‐step ring‐opening polymerization in bulk using stannous octoate as the catalyst. PLA‐b‐PEG‐b‐PLA Triblock copolymer was synthesized at first and then p‐Dioxanone monomers as the other blocks were added to it. In the first step, poly ethylene glycol and, in the second step, triblock copolymer acts as the macro initiator. The obtained copolymers were identified by ?1&/sup;H&/I;, ?13&/sup;CNMR&/I; and IR&/I; spectroscopy. The intrinsic viscosity of copolymers was measured in chloroform/phenol (3/1 v/w) solution. The thermal properties, such as melting point, melting enthalpy and crystallinity, were studied. From the results of differential scanning calorimetry and thermal gravimetric analysis, it was observed that the PPDO blocks show similar crystallization behavior like homopolymer and also melting temperature of two PPDO end blocks raise with an increase in DON content in copolymer.     

Synthesis of poly(ethylene glycol)-SS-poly(ε-caprolactone)-SS-poly(ethylene glycol) triblock copolymers via end-group conjugation and self-assembly for reductively responsive drug delivery

In this study, we describe a simple synthesis route to prepare triblock copolymers with disulfide-linkers, poly(ethylene glycol)-SS-poly(ε-caprolactone)-SS-poly(ethylene glycol) (PEG-SS-PCL-SS-PEG) for application in the reductively responsive release of doxorubicin (DOX). To synthesize PEG-SS-PCL-SS-PEG, two end-groups of PCL-diol were first modified with cystamine to introduce disulfide bonds and subsequently conjugated with PEG-NHS via carbodiimide chemistry. PEG-SS-PCL-SS-PEG fabricated into polymeric micelles with stable structure and different nanoscale sizes via adjusting the PCL chain length, showing obvious reductive responsiveness and fast drug release of encapsulated DOX in the presence of glutathione (GSH). Moreover, DOX-loaded PEG-SS-PCL-SS-PEG micelles exhibited higher therapeutic efficacy than reduction-insensitive PEG-b-PCL micelles in vitro. Thus, end-groups conjugation is a simple and straightforward strategy to introduce intelligent responsiveness in biocompatible block copolymers and improve their therapeutic efficacy.     

Poly(ethylene glycol) decorated poly(methylmethacrylate) nanoparticles for protein adsorption

Poly(ethylene glycol) decorated poly(methyl methacrylate) particles were synthesized by means of emulsion polymerization using poly(ethylene glycol) sorbitan monolaurate (Tween-20) as surfactant. PMMA/PEG particles presented mean diameter (195 ± 15) nm, indicating narrow size distribution. The adsorption behavior of bovine serum albumin (BSA) and concanavalin A (ConA) onto PMMA/PEG particles was investigated by means of spectrophotometry. Adsorption isotherms obtained for BSA onto PMMA/PEG particles fitted well sigmoidal function, which is typical for multilayer adsorption. Con A adsorbed irreversibly onto PMMA/PEG particles. The efficiency of ConA covered particles to induce dengue virus quick agglutination was evaluated.     

pH值对聚乙二醇渗透材料的影响及NMR的分析

为了探讨聚乙二醇(PEG)渗透材料在不同pH条件下的性能,用NaOH溶液和稀盐酸调节PEG渗透材料的pH值.采用核磁共振研究不同pH值条件对PEG结构的影响.研究表明:当pH值在2~8时,PEG渗透材料放置7d可以保持稳定的pH值;在酸性条件下,由于PEG中的O对酸中H+形成作用,削弱了O原子对与O间接相连的-CH2基团的引力,使该-CH2基团中的H原子的化学位移向低场偏移,但PEG的结构不变;在pH值大于8的条件下,氢键的形成导致线状的PEG发生立体扭结,从而产生沉淀.因此,在pH值为2~8的范围内,可以稳定使用PEG渗透材料.     

熔融缩聚合成聚乳酸-聚乙二醇共聚物及其性能研究

采用羧基封端乳酸预聚物与聚乙二醇熔融缩聚合成了聚乳酸-聚乙二醇共聚物,并用GPC、FTIR、1H-NMR等方法表征了预聚物与共聚物,结果表明,预聚物的羧基封端率高于95%,预聚物的相对分子质量可由投料比(物质的量比)控制.热分析结果表明,共聚物中聚乳酸链段呈无规分布,而聚乙二醇链段能够形成结晶微区.力学性能测试结果表明,共聚物的断裂伸长率达371%,有望在聚乳酸韧性改性方面得到应用.     

复合型聚醚聚氨酯固体电解质的制备及交流阻抗分析

合成了1种线性聚醚聚氨酯,并以此聚合物为基体加入O/Li=16(摩尔比)的锂盐,分别掺入纳米SiO2、纳米TiO2制备了两类复合聚合物固体电解质(CSPE).在室温下,纳米SiO2复合型聚合物固体电解质的电导率最大,达到6.40×10-6S/cm.通过红外光谱、热分析及交流阻抗等手段研究了电解质本体,以及掺入无机氧化物粒子之后其质量分数与离子电导率之间的关系.结果表明,纳米SiO2质量分数达到15%,纳米TiO2质量分数达到25%时,离子电导率最大.在室温下,加入纳米SiO2比加入纳米TiO2的离子电导率要高;但随着温度的升高,这种差距越来越小.     

Assembly and degradation of low-fouling click-functionalized poly(ethylene glycol)-based multilayer films and capsules

Nano-/micrometer-scaled films and capsules made of low-fouling materials such as poly(ethylene glycol) (PEG) are of interest for drug delivery and tissue engineering applications. Herein, the assembly and degradation of low-fouling, alkyne-functionalized PEG (PEG(Alk) ) multilayer films and capsules, which are prepared by combining layer-by-layer (LbL) assembly and click chemistry, are reported. A nonlinear, temperature-responsive PEG(Alk) is synthesized, and is then used to form hydrogen-bonded multilayers with poly(methacrylic acid) (PMA) at pH 5. The thermoresponsive behavior of PEG(Alk) is exploited to tailor film buildup by adjusting the assembly conditions. Using alkyne-azide click chemistry, PEG(Alk)/PMA multilayers are crosslinked with a bisazide linker that contains a disulfide bond, rendering these films and capsules redox-responsive. At pH 7, by disrupting the hydrogen bonding between the polymers, PEG(Alk) LbL films and PEG(Alk) -based capsules are obtained. These films exhibit specific deconstruction properties under simulated intracellular reducing conditions, but remain stable at physiological pH, suggesting potential applications in controlled drug release. The low-fouling properties of the PEG films are confirmed by incubation with human serum and a blood clot. Additionally, these capsules showed negligible toxicity to human cells.     

Interaction of poly(ethylene glycol)-conjugated phospholipids with supported lipid membranes and their influence on protein adsorption

We studied real-time interaction between poly(ethylene glycol)-conjugated phospholipids (PEG-lipids) and a supported lipid membrane by surface plasmon resonance (SPR) spectroscopy to understand dynamic behaviors of PEG-lipids on living cell membranes. Supported lipid membranes formed on a hydrophobic surface were employed as a model of living cell membrane. We prepared three kinds of PEG-lipids that carried alkyl chains of different lengths for SPR measurements and also performed fluorescence recovery after photobleaching (FRAP) to study the influence of acyl chain length on dynamics on the supported membrane. PEG-lipids were uniformly anchored to lipid membranes with high fluidity without clustering. Incorporation and dissociation rates of PEG-lipids into supported membranes strongly depended on the length of acyl chains; longer acyl chains reduced the incorporation rate and the dissociation rate of PEG-lipid. Furthermore, protein adsorption experiment with bovine serum albumin indicated that PEG modification prevented the adsorption of bovine serum albumin on such supported membrane.     

刚柔嵌段共聚物聚苯基喹啉-b-聚乙二醇的合成与自组装

以聚乙二醇单甲醚、丁二酸酐、4-氨基苯乙酮、5-乙酰基-2-氨基二苯甲酮为原料合成了以聚苯基喹啉(PPQ)为硬段、聚乙二醇(PEG)为软段的“刚棒-线团”两嵌段共聚物PPQ-b-PEG,通过IR、1^HNMR对其结构进行了表征。并对1mg／ml的PPQ-b-PEG在三氟乙酸／二氯甲烷稀溶液(1：1 TFA：DCM,v／v)的自组装进行了初步研究。结果表明：PPQ-b-PEG能自组装形成直径为4．34μm的聚合物微球。     

锂离子电池用聚合物固体电解质的研究及展望

聚合物固体电解质是制备高功率密度,高能量密度,长循环寿命的锂离子电池的关键材料之一。本文介绍了聚合物固体电解质的制备及基本性能,论述了不同品种聚合物固体电解质的制备方法,并根据存在的问题,提出发展方向。     

Synthesis and characterization of poly(2,5-dimethoxyaniline) and poly(aniline-Co-2,5-dimethoxyaniline): The processable conducting polymers

Poly(2,5-dimethoxyaniline) (PDMOA) and its copolymers with aniline (PADMOA), which exhibit remarkably improved solubility in common organic solvents, were obtained by chemical polymerization, and characterized by a host of physical techniques. The lowering of the quinoid absorption in the IR spectra and the upshifting of the N_1s envelope in the XPS spectra indicate residual doping in the XPS polymers and thermal characteristic of the polymers provide evidence for hydrogen bonding, which appear to enhance the thermal stability of the homopolymer. These polymers are highly planar and conjugated, with well-developed polaronic features, shown by the XRD, ESR and UV-spectral data. The conductivity, however, is not high and apparently may be due to localization of polaronic charges at the hydrogen-bonding sites and the increased proportion of the insulating methoxy component in the polymer matrix.     

聚乙二醇-碳纳米管(PEG-CNTs)共聚物膜的制备及其微摩擦行为的研究

制备了聚乙二醇接枝碳纳管共聚物(PEG-CNTs)。通过红外光谱(FT-IR)。荧光光谱(FS)和透射电子显微镜(TEM)对共聚物进行了表征。利用旋涂技术以云母为基片制备了共聚物薄膜,采用原子力显微镜／摩擦力显微镜(AFM／FFM)研究了薄膜表面的形貌及微摩擦学行为。复合薄膜内的聚合物组分保证了膜的表面平整,坚硬的碳纳米管组分增强了薄膜的承载能力。     

NMR analysis of poly(ethylene naphthalate) + poly(butylene terephthalate) blends

Melt blends of poly (butylene terephthalate) (PBT) and poly (ethylene naphthalate) (PEN) with 30, 40, 50, 60 and 70 wt% PEN were prepared using a single screw extruder and injection moulding machine. ¹³C and ¹H nuclear magnetic resonance (NMR) spectra were obtained with a Bruker DRX-400 instrument, on solutions prepared by dissolving samples of the homopolymers and each blend in deuterated trifluoroacetic acid + chloroform mixtures (1:1 by volume). The absence of new signals in ¹H and ¹³C spectra, that would be expected to result from transesterification reactions in the PBT + PEN blend system, provides convincing evidence that such reactions do not occur in these blends under the melt processing conditions that were used. In the light of published work on solid-state NMR studies of these and related blend systems, and our observations of partial miscibility with a very small domain size, together with substantial enhancement of the mechanical properties of PBT by blending with PEN, we conclude that the improvement in mechanical properties arises from molecular scale mixing of the homopolymers and strong but non-covalent bonding interactions over the very large interfacial area between the PBT-rich and PEN-rich phases.     

Local thermal-mechanical analysis of ultrathin interfacially mixed poly(ethylene oxide)/poly(acrylic acid) layer-by-layer electrolyte assemblies

Ion conductivities of layer-by-layer (LBL) assemblies of solid thin film polyelectrolyte systems involving poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) were found to be a strong function of the number of bilayer stacks, n, with conductivities approaching 10^− 7 S/cm for n < 10, compared to 10^− 9 S/cm for n ≥ 10 and 10^− 10 S/cm for bulk PEO. Increased ion conductivity for low LBL stack numbers (n < 10) originated to part from an effective suppression of the PEO crystallization via PEO/PAA blending, which could be inferred from local glass transition temperature measurements involving shear modulation force microscopy. Another phenomenon responsible for high conductivity in thin films was found in the in-plane phase heterogeneity of PEO and PAA. Increased ion conductivity for larger LBL stacks (n ≥ 10) were attributed to low concentration autoblending caused by PEO-PAA hydrogen bonding, and an average layer thickness of noticeably less than 100 nm. The effect of interfacial constraints was evident in the degree of intermixing, addressed by a thin film extended Fox blend analysis, in the glass and melting transitions of PEO and PAA pure film components. While the glass transition value of PAA decreased by 55% to 46 °C for an 8 nm film, the melting transition for PEO decreased by 15% to 64 °C caused by surface tension effects.     

Ocular permeability of pirenzepine hydrochloride enhanced by methoxy poly(ethylene glycol)-poly(D, L-lactide) block copolymer

Methoxy poly(ethylene glycol)-poly(D,L-lactide) block copolymer was tested as an ocular permeation enhancer for pirenzepine hydrochloride. The block copolymers with the methoxy poly(ethylene glycol) to poly(D,L-lactide) weight ratio of 80/20, 50/50, 40/60 were synthesized by a ring-opening polymerization procedure. In vitro transcorneal experiments demonstrated that the block copolymer 80/20 significantly enhanced the transcorneal permeation of pirenzepine at the mass ratio of 1/1.4 (pirenzepine hydrochloride/copolymer). Interaction between pirenzepine and copolymer was identified by infrared spectroscopy analysis and dialysis experiments. Ocular pharmacokinetics of pirenzepine/copolymer preparation by in vivo instillation experiments confirmed that block copolymer could enhance the ocular penetration of pirenzepine. Ocular chronic toxicity experiments of block copolymer and pirenzepine/copolymer preparation were studied on rabbits, and no significant toxicity in both groups was observed within 9 months. It could conclude that pirenzepine/copolymer preparation is effective and safe in ocular delivery of pirenzepine.     

Poly(L-lysine)-poly(ethylene glycol) layers with different structure and their influence on silica suspension stability

The effects of the structure of di- and triblock copolymers of poly(L-lysine) – LYS with poly(ethylene glycol) – PEG as well as the length of nonionic fragment in the LYS-PEG macromolecule on the copolymer chains conformation in the adsorption layer formed on the colloidal silica (SiO2) surface were examined. Spectrophotometry and turbidimetry were applied for the determination of copolymer adsorbed amounts and stability coefficients of silica aqueous suspensions. The electrokinetic parameters such as solid surface charge density and zeta potential were also estimated. The adsorption of LYS-PEG was proved to be the highest at pH 10 whereas the lowest adsorption on the solid surface was found for the triblock copolymer with long fragments of LYS at the same pH value.     

硫酸酯化聚阴离子PVA的合成及表征

硫酸与聚乙烯醇(PVA)经酯化制备PVA聚阴离子电解质.分别考察了反应时间、反应温度等对取代度的影响.采用红外光谱(IR)、扫描电镜(SEM)对硫酸酯化PVA聚阴离子电解质的结构进行了表征,测定了其热稳定性和导电性.