Market penetration of biodiesel

This research examines in detail the technology and economics of substituting biodiesel for diesel #2. This endeavor examines three areas. First, the benefits of biodiesel are examined, and the technical problems of large-scale implementation. Second, the biodiesel production possibilities are examined for soybean oil, corn oil, tallow, and yellow grease, which are the largest sources of feedstocks for the United States. Examining in detail the production possibilities allows to identity the extent of technological change, production costs, byproducts, and greenhouse gas (GHG) emissions. Finally, a U.S. agricultural model, FASOMGHG was used to predict market penetration of biodiesel, given technological progress, variety of technologies and feedstocks, market interactions, energy prices, and carbon dioxide equivalent prices.FASOMGHG has several interesting results. First, diesel fuel prices have an expansionary impact on the biodiesel industry. The higher the diesel fuel prices, the more biodiesel is produced. However, given the most favorable circumstances, the maximum biodiesel market penetration is 9% in 2030 with a wholesale diesel price of $4 per gallon. Second, the two dominant sources of biodiesel are from corn and soybeans. Sources like tallow and yellow grease are more limited, because they are byproducts of other industries. Third, GHG prices have an expansionary impact on the biodiesel prices, because biodiesel is quite GHG efficient. Finally, U.S. government subsidies on biofuels have an expansionary impact on biodiesel production, and increase market penetration at least an additional 3%.     

Emission analysis of diesel engine fueled with soybean biodiesel and its water blends

The present study is carried out to formulate stable water-in-soybean biodiesel emulsion fuel and investigate its emission characteristics in a single cylinder diesel engine. Four types of emulsion fuels, which consist of a different percentage of water (5%, 10%, 15%, and 20%) in soybean biodiesel, were prepared with suitable surfactant and properties were measured. The physicochemical properties are on par with EN 14214 standards. The experimental result of test fuels indicates that the soybean biodiesel promotes a lower level of hydrocarbon (HC), carbon monoxide (CO) and smoke emissions compared to base diesel except for nitrogen oxide (NOx) emission. Increase in water concentration with soybean biodiesel significantly reduces the NOx emission and smoke opacity. The HC and CO emissions are further reduced with emulsified biodiesel up to 10% water concentration and beyond that limit, marginal increases are recorded. Overall, it is observed that inclusion of water with soybean biodiesel reduces the HC, CO, NOx and smoke emissions when compared to base diesel and soybean biodiesel, and 10% water in soybean biodiesel is an appropriate solution to reduce the overall emissions in the soybean-fuelled diesel engine.     

Importance of biodiesel as transportation fuel

The scarcity of known petroleum reserves will make renewable energy resources more attractive. The most feasible way to meet this growing demand is by utilizing alternative fuels. Biodiesel is defined as the monoalkyl esters of vegetable oils or animal fats. Biodiesel is the best candidate for diesel fuels in diesel engines. The biggest advantage that biodiesel has over gasoline and petroleum diesel is its environmental friendliness. Biodiesel burns similar to petroleum diesel as it concerns regulated pollutants. On the other hand, biodiesel probably has better efficiency than gasoline. One such fuel for compression-ignition engines that exhibit great potential is biodiesel. Diesel fuel can also be replaced by biodiesel made from vegetable oils. Biodiesel is now mainly being produced from soybean, rapeseed and palm oils. The higher heating values (HHVs) of biodiesels are relatively high. The HHVs of biodiesels (39–41 MJ/kg) are slightly lower than that of gasoline (46 MJ/kg), petrodiesel (43 MJ/kg) or petroleum (42 MJ/kg), but higher than coal (32–37 MJ/kg). Biodiesel has over double the price of petrodiesel. The major economic factor to consider for input costs of biodiesel production is the feedstock, which is about 80% of the total operating cost. The high price of biodiesel is in large part due to the high price of the feedstock. Economic benefits of a biodiesel industry would include value added to the feedstock, an increased number of rural manufacturing jobs, an increased income taxes and investments in plant and equipment. The production and utilization of biodiesel is facilitated firstly through the agricultural policy of subsidizing the cultivation of non-food crops. Secondly, biodiesel is exempt from the oil tax. The European Union accounted for nearly 89% of all biodiesel production worldwide in 2005. By 2010, the United States is expected to become the world's largest single biodiesel market, accounting for roughly 18% of world biodiesel consumption, followed by Germany.     

Biodiesel production from inedible animal tallow and an experimental investigation of its use as alternative fuel in a direct injection diesel engine

In this study, a substitute fuel for diesel engines was produced from inedible animal tallow and its usability was investigated as pure biodiesel and its blends with petroleum diesel fuel in a diesel engine. Tallow methyl ester as biodiesel fuel was prepared by base-catalyzed transesterification of the fat with methanol in the presence of NaOH as catalyst. Fuel properties of methyl ester, diesel fuel and blends of them (5%, 20% and 50% by volume) were determined. Viscosity and density of fatty acid methyl ester have been found to meet ASTM D6751 and EN 14214 specifications. Viscosity and density of tallow methyl esters are found to be very close to that of diesel. The calorific value of biodiesel is found to be slightly lower than that of diesel. An experimental study was carried out in order to investigate of its usability as alternative fuel of tallow methyl ester in a direct injection diesel engine. It was observed that the addition of biodiesel to the diesel fuel decreases the effective efficiency of engine and increases the specific fuel consumption. This is due to the lower heating value of biodiesel compared to diesel fuel. However, the effective engine power was comparable by biodiesel compared with diesel fuel. Emissions of carbon monoxide (CO), oxides of nitrogen (NO_x), sulphur dioxide (SO₂) and smoke opacity were reduced around 15%, 38.5%, 72.7% and 56.8%, respectively, in case of tallow methyl esters (B100) compared to diesel fuel. Besides, the lowest CO, NO_x emissions and the highest exhaust temperature were obtained for B20 among all other fuels. The reductions in exhaust emissions made tallow methyl esters and its blends, especially B20 a suitable alternative fuel for diesel and thus could help in controlling air pollution. Based on this study, animal tallow methyl esters and its blends with petroleum diesel fuel can be used a substitute for diesel in direct injection diesel engines without any engine modification.     

Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil

In this study, the biodiesel produced from soybean crude oil was prepared by a method of alkaline-catalyzed transesterification. The important properties of biodiesel were compared with those of diesel. Diesel and biodiesel were used as fuels in the compression ignition engine, and its performance, emissions and combustion characteristics of the engine were analyzed. The results showed that biodiesel exhibited the similar combustion stages to that of diesel, however, biodiesel showed an earlier start of combustion. At lower engine loads, the peak cylinder pressure, the peak rate of pressure rise and the peak of heat release rate during premixed combustion phase were higher for biodiesel than for diesel. At higher engine loads, the peak cylinder pressure of biodiesel was almost similar to that of diesel, but the peak rate of pressure rise and the peak of heat release rate were lower for biodiesel. The power output of biodiesel was almost identical with that of diesel. The brake specific fuel consumption was higher for biodiesel due to its lower heating value. Biodiesel provided significant reduction in CO, HC, NO_x and smoke under speed characteristic at full engine load. Based on this study, biodiesel can be used as a substitute for diesel in diesel engine.     

Properties of biodiesel oils formulated using different biomass sources and their blends

Biodiesel is an alternative diesel fuel which can be obtained from the transesterification of vegetable oils with simple alcohols. This process decreases the viscosity, density and flash point of the raw material. The biodiesel molecular structure, consisting of linear esters, allows similar physical–chemical properties compared to mineral diesel oil. Some important properties of the oil, such as viscosity, melting point, thermal stability and cetane index can be directly related to the chemical composition of the biomass source that was used. It is therefore possible to anticipate which property values will be obtained for each biodiesel produced from a specific vegetable oil, relating them to the chemical nature of the starting vegetable oil. The objective of this study is to evaluate the properties of biodiesel oils obtained from different biomass sources (castor, soybean, cotton, and canola) and their binary blends prepared in concentration ranges between 20 and 80%vol. Each sample was analyzed for viscosity, specific gravity and iodine index. The proper formulation to meet the European specifications for biodiesel (DIN – 14214) using those sources of biomass is presented and discussed.     

On droplet combustion of biodiesel fuel mixed with diesel/alkanes in microgravity condition

The burning characteristics of a biodiesel droplet mixed with diesel or alkanes such as dodecane and hexadecane were experimentally studied in a reduced-gravity environment so as to create a spherically symmetrical flame without the influence of natural convection due to buoyancy. Small droplets on the order of 500 μm in diameter were initially injected via a piezoelectric technique onto the cross point intersected by two thin carbon fibers; these were prepared inside a combustion chamber that was housed in a drag shield, which was freely dropped onto a foam cushion. It was found that, for single component droplets, the tendency to form a rigid soot shell was relatively small for biodiesel fuel as compared to that exhibited by the other tested fuels. The soot created drifted away readily, showing a puffing phenomenon; this could be related to the distinct molecular structure of biodiesel leading to unique soot layers that were more vulnerable to oxidative reactivity as compared to the soot generated by diesel or alkanes. The addition of biodiesel to these more traditional fuels also presented better performance with respect to annihilating the soot shell, particularly for diesel. The burning rate generally follows that of multi-component fuels, by some means in terms of a lever rule, whereas the mixture of biodiesel and dodecane exhibits a somewhat nonlinear relation with the added fraction of dodecane. This might be related to the formation of a soot shell.     

Improving the low temperature properties of biodiesel fuel

The use of biodiesel as a diesel fuel extender and lubricity improver is rapidly increasing. While most of the properties of biodiesel are comparable to petroleum based diesel fuel, improvement of its low temperature flow characteristic still remains one of the major challenges when using biodiesel as an alternative fuel for diesel engines. The biodiesel fuels derived from fats or oils with significant amounts of saturated fatty compounds will display higher cloud points and pour points. This paper is aimed to investigate the cold flow properties of 100% biodiesel fuel obtained from Madhuca indica, one of the important species in the Indian context. In this paper, the cold flow properties of biodiesel were evaluated with and without pour point depressants towards the objectives of identifying the pumping and injecting of these biodiesel in CI engines under cold climates. Effect of ethanol, kerosene and commercial additive on cold flow behavior of this biodiesel was studied. A considerable reduction in pour point has been noticed by using these cold flow improvers. The performance and emission with ethanol blended Mahua biodiesel fuel and ethanol–diesel blended Mahua biodiesel fuel have also been studied. A considerable reduction in emission was obtained. Ethanol blended biodiesel is totally a renewable, viable alternative fuel for improved cold flow behavior and better emission characteristics without affecting the engine performance.     

Analysis of blended fuel properties and engine performance with palm biodiesel–diesel blended fuel

Depleting fossil fuel sources accompanied by continuously growing energy demands lead to increased interest in alternative energy sources. Blended biodiesel–diesel fuel has been approved as a commercial fuel at a low blending ratio. However, problems related to fuel properties are persistent at high blending ratios. Hence, in this study, the feasibility of biodiesel produced from palm oil was investigated. Characterization of blended fuel properties with increasing palm biodiesel ratio is conducted to evaluate engine performance test results. The qualifying of blended fuel properties was used to indicate the maximum blending ratio suitable for use in unmodified diesel engines according to the blended fuel standard ASTM D7467. The property test results revealed that blended fuel properties meet blended fuel standard requirements at up to 30% palm oil biodiesel. Furthermore, blending is efficient for reduction of the pour point from 14 °C for unblended biodiesel to less than 0 °C at a 30% biodiesel blending ratio. However, the energy content reduces by about 1.42% for each 10% increment of biodiesel. Engine test results demonstrated that there was no statistically significant difference for engine brake thermal efficiency among tested blended fuels compared to mineral diesel, and the lowest engine cyclic variation was achieved with blended fuel B30.     

Net energy balance of small-scale on-farm biodiesel production from canola and soybean

One necessary criterion for a biofuel to be a sustainable alternative to the petroleum fuels it displaces is a positive net energy balance. This study estimated the net energy ratio (NER), net energy balance (NEB), and net energy yield (NEY) of small-scale on-farm production of canola [Brassica napus (L.)] and soybean [Glycine max (L.)] biodiesel in the upper Midwest. Direct and embodied energy inputs based on well-defined system boundaries and contemporary data were used to estimate the energy requirement of crop production, oil extraction, and biofuel processing. The NER of canola biodiesel was 1.78 compared with 2.05 for soybean biodiesel. Canola biodiesel had a NEB of 0.66 MJ MJ⁻¹ of biofuel compared with 0.81 MJ MJ⁻¹ for soybean biodiesel. The NEY of soybean biodiesel was 10,951 MJ ha⁻¹, less than canola biodiesel which had a NEY of 11,353 MJ ha⁻¹. Use of soybean as a biodiesel feedstock was more energetically efficient than canola primarily due to reduced nitrogen fertilizer requirement. In terms of energetic productivity, canola was a more productive biodiesel feedstock than soybean due to its higher oil content. A best-case scenario based on optimal feedstock yields, reduced fertilizer input, and advanced biofuel processing equipment suggested that potential gains in energetic efficiency was greater for canola than soybean. According to our results, small-scale on-farm biodiesel production using canola and soybean can be an energetically efficient way to produce energy for on-farm use.     

Fast biodiesel production from beef tallow with radio frequency heating

Efficient biodiesel production from beef tallow was achieved with radio frequency (RF) heating. A conversion rate of 96.3 ± 0.5% was obtained with a NaOH concentration of 0.6% (based on tallow), an RF heating for 5 min, and a methanol/tallow molar ratio of 9:1. Response surface methodology was employed to evaluate the influence of NaOH dose, RF heating time, and methanol/tallow ratio. The alkaline concentration showed the largest positive impact on the conversion rate. Similar fast conversion from canola oil to biodiesel was achieved in our previous work, indicating that RF heating, as an accelerating technique for biodiesel production, had a large applying area. Viscosities of biodiesel products from beef tallow and canola oil were measured as 5.23 ± 0.01 and 4.86 ± 0.01 mm² s^?1, respectively, both meeting the specification in ASTM D6751 (1.9–6.0 mm² s^?1).     

Hydrogen addition to tea seed oil biodiesel: Performance and emission characteristics

Compression ignition engines are the dominant tools of the modern human life especially in the field of transportation. But, the increasing problematic issues such as decreasing reserves and environmental effects of diesel fuels which is the energy source of compression ignition engines forcing researchers to investigate alternative fuels for substitution or decreasing the dependency on fossil fuels. The mostly known alternative fuel is biodiesel fuel and many researchers are investigating the possible raw materials for biodiesel production. Also, hydrogen fuel is an alternative fuel which can be used in compression ignition engines for decreasing fuel consumption and hazardous exhaust emissions by enriching the fuel. In this study, influences of hydrogen enrichment to diesel and diesel tea seed oil biodiesel blends (B10 and B20) were investigated on an unmodified compression ignition engine experimentally. In consequence of the experiments, lower torque and higher brake specific fuel consumption data were measured when the engine was fuelled diesel biodiesel blends (B10 and B20) instead of diesel fuel. Also, diesel biodiesel blends increased CO₂ and NO_x emissions while decreasing the CO emissions. Hydrogen enrichment (5 l/m and 10 l/m) was improved the both torque and brake specific fuel consumption for all test fuels. Furthermore, hydrogen enrichment reduced CO and CO₂ emissions due to absence of carbon atoms in the chemical structure for all test fuels. Increasing flow rate of hydrogen fuel from 5 l/m to 10 l/m further improved performance measures and emitted harmful gases except NO_x. The most significant drawback of the hydrogen enrichment was the increased NO_x emissions.     

非直喷式增压柴油机燃用生物柴油的性能与排放特性

研究了非直喷式增压柴油机燃用柴油一生物柴油混合燃料的性能和排放特性。未对原机作任何调整和改动,研究了不同生物柴油掺混比例的混合燃料对功率、油耗、烟度和NOx排放的影响。结果表明：非直喷式柴油机燃用生物柴油后柴油机功率略有下降,油耗有所上升,烟度大幅下降,NOx排放增加明显。油耗、烟度和NOx的变化均与生物柴油掺混比例呈线性关系,合适的生物柴油掺混比例即可以保持柴油机的性能,又可有效地降低碳烟排放,且不引起NOx排放的显著变化。对于该增压柴油机,掺混生物柴油对外特性下的排放影响最大,影响最小的为标定转速下的负荷特性。不论是全负荷还是部分负荷,燃用生物柴油时低速下的烟度降低和NOx上升幅度均比高速时大,而同转速下高负荷时烟度降低和NOx上升更为明显。     

Catalytic production of biodiesel from soy-bean oil, used frying oil and tallow

Three fatty materials, soy-bean oil, used frying oil and tallow, were transformed into two different types of biodiesel, by transesterification and amidation reactions with methanol and diethylamine respectively. The ignition properties of these types of biodiesel were evaluated calculating the cetane index of the transesterification products, and the blending cetane number of the amide biodiesel blended with conventional diesel. Amide biodiesel enhances the ignition properties of the petrochemical diesel fuel, and it could account for the 5% market share that should be secured to biofuels by 2005.     

Evaluation of fuel consumption and vibration characteristic of a compression ignition engine fuelled with high viscosity biodiesel and hydrogen addition

Viscosity property of a fuel is a crucial point for internal combustion engine characteristics. Performance and emission parameters as well as injector's life of an engine is primarily effected by viscosity of the fuels. In present study, effect of high viscosity biodiesel fuels with hydrogen addition was investigated in a compression ignition engine. Biodiesels that are produced from Pongamia Pinnata and Tung oils were used as pure biodiesels as well as blended with low sulphur diesel fuel at the volume ratios of 50% and 75%. Furthermore, hydrogen gas was injected into intake manifold in order to evaluate its effect with the usage of high viscous liquid fuels. The results revealed that brake specific fuel consumption was increased with biodiesel fuels, whereas hydrogen addition into intake manifold improved the consumption. Total vibration acceleration of the engine reduced with biodiesel and hydrogen additions. Frequency spectrum indicated that this decrement was primarily lowered due to less energy transmitted through engine pistons that converted from chemical energy of fuels.     

Necessity of biodiesel utilization as a source of renewable energy in Malaysia

In recent decades, the energy crisis and environmental issues have become a crucial problem. The rapid industrialization has lead humankind to deplete the fossil fuels and consequently the pollutant emissions have increased in the world. Many investigations have been done to find an alternative fuel to fulfill increasing energy demand. Recently, biodiesel has been introduced as an economical renewable and sustainable fuel which is cited as an environment-friendly resource. Around 350 oil-bearing crops were analyzed and some of them were capable to be considered as potential alternative fuels for diesel engines. These include virgin vegetable oils and waste vegetable oils. Rapeseed, jatropha, soybean, and palm oil are mentioned as the most common sources of biodiesel. Many countries have invested in biodiesel as an acceptable source of energy not only in research area but also in production and export. It has been proven that the biodiesel combustion characteristics are similar as petroleum. Higher ignition pressure and temperature, shorter ignition delay and higher peak release were reported in experimental combustion of biodiesel blends. Also, the efficiency of biodiesel base catalysts is more than enzymes and acid catalysts. This article is a literature review on necessity of biodiesel production as alternative fuel recourse in Malaysia and tries to illustrate the combustion characteristics and pollutant formation in biodiesel application.     

Comparison of performance characteristics of agricultural tractor diesel engine operating on home and industrially produced biodiesel

Owing to unstable diesel fuel prices in the world market, many farmers have been looking for alternative fuels. Vegetable oils are one of the alternatives, which can be used as fuel in diesel engines either in the form of straight vegetable oil or in the form of biodiesel. This study aims to present experimental data by utilization of home and industrial biodiesel as fuel in an agricultural tractor diesel engine. The home biodiesel production was made from different vegetable oils (crude rapeseed, edible sunflower and waste oil) with the process of one‐stage‐based catalyzed transesterification. A commercially available agricultural tractor ZETOR 7745 was employed. Measurements were taken on the power take‐off shaft by electrical dynamometer FROMENT XT200. According to the results, agricultural tractor diesel engine operating on home biodiesel fuels had better performance characteristics related to industrially produced biodiesel and similar to conventional diesel fuel. Copyright © 2009 John Wiley & Sons, Ltd.     

Progress in biodiesel processing

Biodiesel is a notable alternative to the widely used petroleum-derived diesel fuel since it can be generated by domestic natural sources such as soybeans, rapeseeds, coconuts, and even recycled cooking oil, and thus reduces dependence on diminishing petroleum fuel from foreign sources. The injection and atomization characteristics of the vegetable oils are significantly different than those of petroleum-derived diesel fuels, mainly as the result of their high viscosities. Modern diesel engines have fuel-injection system that is sensitive to viscosity change. One way to avoid these problems is to reduce fuel viscosity of vegetable oil in order to improve its performance. The conversion of vegetable oils into biodiesel is an effective way to overcome all the problems associated with the vegetable oils. Dilution, micro-emulsification, pyrolysis, and transesterification are the four techniques applied to solve the problems encountered with the high fuel viscosity. Transesterification is the most common method and leads to monoalkyl esters of vegetable oils and fats, now called biodiesel when used for fuel purposes. The methyl ester produced by transesterification of vegetable oil has a high cetane number, low viscosity and improved heating value compared to those of pure vegetable oil which results in shorter ignition delay and longer combustion duration and hence low particulate emissions.     

Exhaust emission study on neat biodiesel and alcohol blends fueled diesel engine

In this study, neat biodiesel with octanol additive was employed in a diesel engine and its effects on engine emission were studied. The five fuels evaluated were neat palm kernal oil biodiesel, octanol blended with biodiesel by 10%, 20%, and 30% volume, and diesel. All the emissions are reduced by the addition of octanol in biodiesel in all loads owing to the higher oxygen concentration of air/fuel mixtures and improved atomization. Hence, it is concluded that the neat biodiesel and octanol blends can be employed as an alternative fuel for existing unmodified diesel engines owing to its lesser emission characteristics.     

Effect of straight vegetable oil blends and biodiesel blends on wear of mechanical fuel injection equipment of a constant speed diesel engine

Vegetable oils and biodiesel have emerged as strong alternative fuels worldwide. However use of new fuels in existing engines leads to issues such as wear of vital moving components, and fuel injection equipment (FIE). It is important to ensure that new alternative fuel does not affect the FIE adversely. In this experimental study, a non-firing engine FIE simulator test rig prototype was developed and 250 h endurance test of FIE was performed with an objective to ensure the long-term compatibility and durability of biofuel blends. The components of FIE such as plunger, nozzle needle, valve, and valve holder were investigated for wear. Test fuels used in this study were Karanja blends (K20, K5), Jatropha blends (J20, J5), Biodiesel blends (B20, B5) and baseline mineral diesel in a non-firing engine FIE simulator. The compatibility of FIE with test fuels in terms of dimensional loss, weight loss and surface texture variations using optical microscopy before and after the endurance test was compared. Biodiesel blends showed relatively lower wear compared to mineral diesel however SVO blends showed no definite trend of the wear results compared to baseline mineral diesel.