Rationally Designed Dynamic Protein Hydrogels with Reversibly Tunable Mechanical Properties

Protein hydrogels have attracted considerable interest due to their potential applications in biomedical engineering. Creating protein hydrogels with dynamic mechanical properties is challenging. Here, the engineering of a novel, rationally designed protein‐hydrogel is reported that translates molecular level protein folding‐unfolding conformational changes into macroscopic reversibly tunable mechanical properties based on a redox controlled protein folding‐unfolding switch. This novel protein folding switch is constructed from a designed mutually exclusive protein. Via oxidation and reduction of an engineered disulfide bond, the protein folding switch can switch its conformation between folded and unfolded states, leading to a drastic change of protein's effective chain length and mechanical compliance. This redox‐responsive protein can be readily photochemically crosslinked into solid hydrogels, in which molecular level conformational changes (folding‐unfolding) can result in significant macroscopic changes in hydrogel's physical and mechanical properties due to the change of the effective chain length between two crosslinking points in the protein hydrogel network. It is found that when reduced, the hydrogel swells and is mechanically compliant; when oxidized, it swells to a less extent and becomes resilient and stiffer, exhibiting an up to fivefold increase in its Young's modulus. The changes of the mechanical and physical properties of this hydrogel are fully reversible and can be cycled using redox potential. This novel protein hydrogel with dynamic mechanical and physical properties could find numerous applications in material sciences and tissue engineering.     

Bioorthogonal Strategies for Engineering Extracellular Matrices

Hydrogels are commonly used as engineered extracellular matrix (ECM) mimics in applications ranging from tissue engineering to in vitro disease models. Ideal mechanisms used to crosslink ECM‐mimicking hydrogels do not interfere with the biology of the system. However, most common hydrogel crosslinking chemistries exhibit some form of crossreactivity. The field of bioorthogonal chemistry has arisen to address the need for highly specific and robust reactions in biological contexts. Accordingly, bioorthogonal crosslinking strategies are incorporated into hydrogel design, allowing for gentle and efficient encapsulation of cells in various hydrogel materials. Furthermore, the selective nature of bioorthogonal chemistries can permit dynamic modification of hydrogel materials in the presence of live cells and other biomolecules to alter matrix mechanical properties and biochemistry on demand. This review provides an overview of bioorthogonal strategies used to prepare cell‐encapsulating hydrogels and highlights the potential applications of bioorthogonal chemistries in the design of dynamic engineered ECMs.     

Gradient Porous Elastic Hydrogels with Shape‐Memory Property and Anisotropic Responses for Programmable Locomotion

Programmable locomotion of responsive hydrogels has gained increasing attention for potential applications in soft robotics, microfluidic components, actuators, and artificial muscle. Modulation of hydrogel pore structures is essential for tailoring their mechanical strength, response speeds, and motion behaviors. Conventional methods forming hydrogels with homogeneous or stepwise‐distributed pore structures are limited by the required compromise to simultaneously optimize these aspects. Here, a heterobifunctional crosslinker enabled hydrothermal process is introduced to synthesize responsive hydrogels with well‐defined gradient pore construction. According to gradient porosity controls, the hydrogels simultaneously exhibit rapid responses to external stimuli, high elasticity/compressibility, and programmable locomotion capability. By incorporating polypyrrole nanoparticles as photothermal transducers, photo/thermal responsive composite hydrogels are formed to enable programmable control of locomotion such as bending, curving, twisting, and octopus‐like swimming under near‐infrared laser stimulation. The tunable pore structures, mechanical properties, and locomotion of this new class of materials make these gradient porous hydrogels potentially suitable for a variety of applications.     

Bioinspired Reversibly Cross‐linked Hydrogels Comprising Polypeptide Micelles Exhibit Enhanced Mechanical Properties

Noncovalently cross‐linked networks are attractive hydrogel platforms because of their facile fabrication, dynamic behavior, and biocompatibility. The majority of noncovalently cross‐linked hydrogels, however, exhibits poor mechanical properties, which significantly limit their utility in load bearing applications. To address this limitation, hydrogels are presented composed of micelles created from genetically engineered, amphiphilic, elastin‐like polypeptides that contain a relatively large hydrophobic block and a hydrophilic terminus that can be cross‐linked through metal ion coordination. To create the hydrogels, heat is firstly used to trigger the self‐assembly of the polypeptides into monodisperse micelles that display transition metal coordination motifs on their coronae, and subsequently cross‐link the micelles by adding zinc ions. These hydrogels exhibit hierarchical structure, are stable over a large temperature range, and exhibit tunable stiffness, self‐healing, and fatigue resistance. Gels with polypeptide concentration of 10%, w/v, and higher show storage moduli of ≈1 MPa from frequency sweep tests and exhibit self‐healing within minutes. These reversibly cross‐linked, hierarchical hydrogels with enhanced mechanical properties have potential utility in a variety of biomedical applications.     

Regulation of Stem Cell Fate in a Three‐Dimensional Micropatterned Dual‐Crosslinked Hydrogel System

Micropatterning technology is a powerful tool for controlling the cellular microenvironment and investigating the effects of physical parameters on cell behaviors, such as migration, proliferation, apoptosis, and differentiation. Although there have been significant developments in regulating the spatial and temporal distribution of physical properties in various materials, little is known about the role of the size of micropatterned regions of hydrogels with different crosslinking densities on the response of encapsulated cells. In this study, a novel alginate hydrogel system that can be micropatterned three‐dimensionally is engineered to create regions that are crosslinked by a single mechanism or dual mechanisms. By manipulating micropattern size while keeping the overall ratio of single‐ to dual‐crosslinked hydrogel volume constant, the physical properties of the micropatterned alginate hydrogels are spatially tunable. When human adipose‐derived stem cells (hASCs) are photoencapsulated within micropatterned hydrogels, their proliferation rate is a function of micropattern size. Additionally, micropattern size dictates the extent of osteogenic and chondrogenic differentiation of photoencapsulated hASC. The size of 3D micropatterned physical properties in this new hydrogel system introduces a new design parameter for regulating various cellular behaviors, and this dual‐crosslinked hydrogel system provides a new platform for studying proliferation and differentiation of stem cells in a spatially controlled manner for tissue engineering and regenerative medicine applications.     

Self‐Healing Silk Fibroin‐Based Hydrogel for Bone Regeneration: Dynamic Metal‐Ligand Self‐Assembly Approach

Despite advances in the development of silk fibroin (SF)‐based hydrogels, current methods for SF gelation show significant limitations such as lack of reversible crosslinking, use of nonphysiological conditions, and difficulties in controlling gelation time. In the present study, a strategy based on dynamic metal‐ligand coordination chemistry is developed to assemble SF‐based hydrogel under physiological conditions between SF microfibers (mSF) and a polysaccharide binder. The presented SF‐based hydrogel exhibits shear‐thinning and autonomous self‐healing properties, thereby enabling the filling of irregularly shaped tissue defects without gel fragmentation. A biomineralization approach is used to generate calcium phosphate‐coated mSF, which is chelated by bisphosphonate ligands of the binder to form reversible crosslinkages. Robust dually crosslinked (DC) hydrogel is obtained through photopolymerization of acrylamide groups of the binder. DC SF‐based hydrogel supports stem cell proliferation in vitro and accelerates bone regeneration in cranial critical size defects without any additional morphogenes delivered. The developed self‐healing and photopolymerizable SF‐based hydrogel possesses significant potential for bone regeneration application with the advantages of injectability and fit‐to‐shape molding.     

Poly(N‐isopropylacrylamide)‐Clay Nanocomposite Hydrogels with Responsive Bending Property as Temperature‐Controlled Manipulators

Novel poly(N‐isopropylacrylamide)‐clay (PNIPAM‐clay) nanocomposite (NC) hydrogels with both excellent responsive bending and elastic properties are developed as temperature‐controlled manipulators. The PNIPAM‐clay NC structure provides the hydrogel with excellent mechanical property, and the thermoresponsive bending property of the PNIPAM‐clay NC hydrogel is achieved by designing an asymmetrical distribution of nanoclays across the hydrogel thickness. The hydrogel is simply fabricated by a two‐step photo polymerization. The thermoresponsive bending property of the PNIPAM‐clay NC hydrogel is resulted from the unequal forces generated by the thermoinduced asynchronous shrinkage of hydrogel layers with different clay contents. The thermoresponsive bending direction and degree of the PNIPAM‐clay NC hydrogel can be adjusted by controlling the thickness ratio of the hydrogel layers with different clay contents. The prepared PNIPAM‐clay NC hydrogels exhibit rapid, reversible, and repeatable thermoresponsive bending/unbending characteristics upon heating and cooling. The proposed PNIPAM‐clay NC hydrogels with excellent responsive bending property are demonstrated as temperature‐controlled manipulators for various applications including encapsulation, capture, and transportation of targeted objects. They are highly attractive material candidates for stimuli‐responsive “smart” soft robots in myriad fields such as manipulators, grippers, and cantilever sensors.     

Nonswelling,Ultralow Content Inverse Electron‐Demand Diels–Alder Hyaluronan Hydrogels with Tunable Gelation Time: Synthesis and In Vitro Evaluation

Hyaluronan (HA) is a major component of the extracellular matrix and is particularly attractive for cell‐based assays; yet, common crosslinking strategies of HA hydrogels are not fully tunable and bioorthogonal, and result in gels subject to swelling, which affects their physicochemical properties. To overcome these limitations, HA hydrogels based on the inverse electron‐demand Diels–Alder (IEDDA) “click” reaction are designed. By crosslinking two modified HA components together, as opposed to using telechelic components, tunable gelation times as fast as 4.4 ± 0.4 min and as slow as 46.2 ± 1.8 min are achieved for facile use. By optimizing HA molar mass, ultralow polymer content hydrogels of 0.5% (w/v), resulting in minimal (<3–5% mass variation) to nonswelling (<1%), transparent and biodegradable hydrogels are synthesized. To demonstrate their versatility, the newly designed hydrogels are tested as matrices for 3D cell culture and retinal explant imaging where transparency is important. IEDDA hydrogels are cytocompatible with primary photoreceptors and enable multiphoton imaging of embedded retinal explants for double the time (>38 h) than agarose thermogels (<20 h). IEDDA HA hydrogels constitute a new hydrogel platform. They have low polymer content, tunable gelation time, and are stable, thereby making them suitable for a diversity of applications.     

Tunable Colors in Opals and Inverse Opal Photonic Crystals

Colloidal photonic crystals and materials derived from colloidal crystals can exhibit distinct structural colors that result from incomplete photonic band gaps. Through rational materials design, the colors of such photonic crystals can be tuned reversibly by external physical and chemical stimuli. Such stimuli include solvent and dye infiltration, applied electric or magnetic fields, mechanical deformation, light irradiation, temperature changes, changes in pH, and specific molecular interactions. Reversible color changes result from alterations in lattice spacings, filling fractions, and refractive index of system components. This review article highlights the different systems and mechanisms for achieving tunable color based on opaline materials with close‐packed or non‐close‐packed structural elements and inverse opal photonic crystals. Inorganic and polymeric systems, such as hydrogels, metallopolymers, and elastomers are discussed.     

Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels

3D‐printing is emerging as a technology to introduce microchannels into hydrogels, for the perfusion of engineered constructs. Although numerous techniques have been developed, new techniques are still needed to obtain the complex geometries of blood vessels and with materials that permit desired cellular responses. Here, a printing process where a shear‐thinning and self‐healing hydrogel “ink” is injected directly into a “support” hydrogel with similar properties is reported. The support hydrogel is further engineered to undergo stabilization through a thiol‐ene reaction, permitting (i) the washing of the ink to produce microchannels and (ii) tunable properties depending on the crosslinker design. When adhesive peptides are included in the support hydrogel, endothelial cells form confluent monolayers within the channels, across a range of printed configurations (e.g., straight, stenosis, spiral). When protease‐degradable crosslinkers are used for the support hydrogel and gradients of angiogenic factors are introduced, endothelial cells sprout into the support hydrogel in the direction of the gradient. This printing approach is used to investigate the influence of channel curvature on angiogenic sprouting and increased sprouting is observed at curved locations. Ultimately, this technique can be used for a range of biomedical applications, from engineering vascularized tissue constructs to modeling in vitro cultures.     

A Review of Design and Fabrication Methods for Nanoparticle Network Hydrogels for Biomedical,Environmental, and Industrial Applications

Nanoparticle network hydrogels (NNHs) in which nanoparticles are used as a key building block to build the gel network have attracted significant interest given their potential to leverage the favorable properties of both hydrogels (e.g., hydrophilicity, tunable pore sizes, mechanics, etc.) and a variety of different nanoparticles (e.g., high surface area, chemical activity, independently tunable porosity, mechanics) to create new functional materials. Herein, recent progress in the design and use of NNHs is comprehensively reviewed, with an emphasis on defining the typical gel morphologies/architectures that can be achieved with NNHs, the typical crosslinking approaches used to fabricate NNHs, the fundamental properties and functional benefits of NNHs, and the reported applications of NNHs in electronics (flexible electronics, sensors), environmental (sorbents, separations), agriculture, self-cleaning-materials, and biomedical (drug delivery, tissue engineering) applications. In particular, the way in which the NNH structure is applied to improve the performance of the hydrogel in each application is emphasized, with the aim to develop a set of principles that can be used to rationally design NNHs for future uses.     

Molecularly‐Engineered, 4D‐Printed Liquid Crystal Elastomer Actuators

Three‐dimensional structures that undergo reversible shape changes in response to mild stimuli enable a wide range of smart devices, such as soft robots or implantable medical devices. Herein, a dual thiol‐ene reaction scheme is used to synthesize a class of liquid crystal (LC) elastomers that can be 3D printed into complex shapes and subsequently undergo controlled shape change. Through controlling the phase transition temperature of polymerizable LC inks, morphing 3D structures with tunable actuation temperature (28 ± 2 to 105 ± 1 °C) are fabricated. Finally, multiple LC inks are 3D printed into single structures to allow for the production of untethered, thermo‐responsive structures that sequentially and reversibly undergo multiple shape changes.     

Shear‐Thinning Supramolecular Hydrogels with Secondary Autonomous Covalent Crosslinking to Modulate Viscoelastic Properties In Vivo

Clinical percutaneous delivery of synthetically engineered hydrogels remains limited due to challenges posed by crosslinking kinetics—too fast leads to delivery failure, too slow limits material retention. To overcome this challenge, supramolecular assembly is exploited to localize hydrogels at the injection site and introduce subsequent covalent crosslinking to control final material properties. Supramolecular gels are designed through the separate pendant modifications of hyaluronic acid (HA) by the guest–host pair cyclodextrin and adamantane, enabling shear‐thinning injection and high target site retention (>98%). Secondary covalent crosslinking occurs via addition of thiols and Michael‐acceptors (i.e., methacrylates, acrylates, vinyl sulfones) on HA and increases hydrogel moduli (E = 25.0 ± 4.5 kPa) and stability (>3.5 fold in vivo at 28 d). Application of the dual‐crosslinking hydrogel to a myocardial infarct model shows improved outcomes relative to untreated and supramolecular hydrogel alone controls, demonstrating its potential in a range of applications where the precise delivery of hydrogels with tunable properties is desired.     

An Adaptable Tough Elastomer with Moisture‐Triggered Switchable Mechanical and Fluorescent Properties

Smart materials with coupled optical and mechanical responsiveness to external stimuli, as inspired by nature, are of interest for the biomimetic design of the next generation of soft machines and wearable electronics. A tough polymer that shows adaptable and switchable mechanical and fluorescent properties is designed using a fluorescent lanthanide, europium (Eu). The dynamic Eu‐iminodiacetate (IDA) coordination is incorporated to build up the physical cross‐linking network in the polymer film consisting of two interpenetrated networks. Reversible disruption and reformation of Eu‐IDA complexation endow high stiffness, toughness, and stretchability to the polymer elastomer through energy dissipation of dynamic coordination. Water that binds to Eu³⁺ ions shows an interesting impact simultaneously on the mechanical strength and fluorescent emission of the Eu‐containing polymer elastomer. The mechanical states of the polymer, along with the visually optical response through the emission color change of the polymer film, are reversibly switchable with moisture as a stimulus. The coupled response in the mechanical strength and emissive color in one single material is potentially applicable for smart materials requiring an optical readout of their mechanical properties.     

Confinement of Thermoresponsive Hydrogels in Nanostructured Porous Silicon Dioxide Templates

A thermoresponsive hydrogel, poly(N‐isopropylacrylamide) (poly(NIPAM)), is synthesized in situ within an oxidized porous Si template, and the nanocomposite material is characterized. Infiltration of the hydrogel into the interconnecting nanoscale pores of the porous SiO₂ host is confirmed by scanning electron microscopy. The optical reflectivity spectrum of the nanocomposite hybrid displays Fabry–Pérot fringes characteristic of thin film interference, enabling direct, real‐time observation of the volume phase transition of the confined poly(NIPAM) hydrogel. Reversible optical reflectivity changes are observed to correlate with the temperature‐dependent volume phase transition of the hydrogel, providing a new means of studying nanoscale confinement of responsive hydrogels. The confined hydrogel displays a swelling and shrinking response to changes in temperature that is significantly faster than that of the bulk hydrogel. The porosity and pore size of the SiO₂ template, which are precisely controlled by the electrochemical synthesis parameters, strongly influence the extent and rate of changes in the reflectivity spectrum of the nanocomposite. The observed optical response is ascribed to changes in both the mechanical and the dielectric properties of the nanocomposite.     

A Biomimetic Mussel‐Inspired ε‐Poly‐l‐lysine Hydrogel with Robust Tissue‐Anchor and Anti‐Infection Capacity

In situ hydrogels have attracted considerable attention in tissue engineering because of their minimal invasiveness and ability to match the irregular tissue defects. However, hydrous physiological environments and the high level of moisture in hydrogels severely hamper binding to the target tissue and easily cause wound infection, thereby limiting the effectiveness in wound care management. Thus, forming an intimate assembly of the hydrogel to the tissue and preventing wound infecting still remains a significant challenge. In this study, inspired by mussel adhesive protein, a biomimetic dopamine‐modified ε‐poly‐l ‐lysine‐polyethylene glycol‐based hydrogel (PPD hydrogel) wound dressing is developed in situ using horseradish peroxidase cross‐linking. The biomimetic catechol–Lys residue distribution in PPD polymer provides a catechol–Lys cooperation effect, which endows the PPD hydrogels with superior wet tissue adhesion properties. It is demonstrated that the PPD hydrogel can facilely and intimately integrate with biological tissue and exhibits superior capacity of in vivo hemostatic and accelerated wound repair. In addition, the hydrogels exhibit outstanding anti‐infection property because of the inherent antibacterial ability of ε‐poly‐l ‐lysine. These findings shed new light on the development of mussel‐inspired tissue‐anchored and antibacterial hydrogel materials serving as wound dressings.     

Dopant‐Free Hydrogels with Intrinsic Photoluminescence and Biodegradable Properties

Photoluminescent hydrogels that function as both injectable scaffolds and fluorescent imaging probes hold great potential for therapeutics delivery and tissue engineering. Current fluorescent hydrogels are fabricated by either conjugating or doping a fluorescent dye, fluorescent protein, lanthanide chelate, or quantum dot into polymeric hydrogel matrix. Their biomedical applications are severely limited due to drawbacks such as photostability, carcinogenesis, and toxicity associated with the above‐mentioned dopants. Here, a successful development of dopant‐free photoluminescent hydrogels in situ formed by crosslinking of biocompatible polymer precursors is reported, which can be synthesized by incorporating an amino acid to a citric acid based polyester oligomer followed by functionalization of multivalent crosslinking group through a convenient transesterification reaction using Candida Antarctica Lipase B as a catalyst. It is demonstrated that the newly developed hydrogels possess tunable degradation, intrinsic photoluminescence, mechanical properties, and exhibit sustained release of various molecular weight dextrans. In vivo study shows that the hydrogels formed in situ following subcutaneous injection exhibit excellent biocompatibility and emit strong fluorescence under visible light excitation without the need of using any traditional organic dyes. Their in vivo degradation profiles are then depicted by noninvasively monitoring fluorescence intensity of the injected hydrogel implants.     

Protein Fragment Reconstitution as a Driving Force for Self‐Assembling Reversible Protein Hydrogels

Due to their potential biomedical applications, protein‐based hydrogels have attracted considerable interest. Although various methods have been developed to engineer self‐assembling, physically‐crosslinked protein hydrogels, exploring novel driving forces to engineer such hydrogels remains challenging. Protein fragment reconstitution, also known as fragment complementation, is a self‐assembling mechanism by which protein fragments can reconstitute the folded conformation of the native protein when split into two halves. Although it has been used in biophysical studies and bioassays, fragment reconstitution has not been explored for hydrogel construction. Using a small protein GL5 as a model, which is capable of fragment reconstitution to reconstitute the folded GL5 spontaneously when split into two halves, GN and GC, we demonstrate that protein fragment reconstitution is a novel driving force for engineering self‐assembling reversible protein hydrogels. Fragment reconstitution between GN and GC crosslinks GN and GC‐containing proteins into self‐assembling reversible protein hydrogels. These novel hydrogels show temperature‐dependent reversible sol‐gel transition, and excellent property against erosion in water. Since many proteins can undergo fragment reconstitution, we anticipate that such fragment reconstitution may offer a general driving force for engineering protein hydrogels from a variety of proteins, and thus significantly expanding the ‘toolbox’ currently available in the field of biomaterials.     

4D Printing of Hydrogels: A Review

3D printing permits the construction of objects by layer‐by‐layer deposition of material, resulting in precise control of the dimensions and properties of complex printed structures. Although 3D printing fabricates inanimate objects, the emerging technology of 4D printing allows for animated structures that change their shape, function, or properties over time when exposed to specific external stimuli after fabrication. Among the materials used in 4D printing, hydrogels have attracted growing interest due to the availability of various smart hydrogels. The reversible shape‐morphing in 4D printed hydrogel structures is driven by a stress mismatch arising from the different swelling degrees in the parts of the structure upon application of a stimulus. This review provides the state‐of‐the‐art of 4D printing of hydrogels from the materials perspective. First, the main 3D printing technologies employed are briefly depicted, and, for each one, the required physico‐chemical properties of the precursor material. Then, the hydrogels that have been printed are described, including stimuli‐responsive hydrogels, non‐responsive hydrogels that are sensitive to solvent absorption/desorption, and multimaterial structures that are totally hydrogel‐based. Finally, the current and future applications of this technology are presented, and the requisites and avenues of improvement in terms of material properties are discussed.     

Hydrogel−Solid Hybrid Materials for Biomedical Applications Enabled by Surface‐Embedded Radicals

Combinations of hydrogels and solids provide high level functionality for devices such as tissue engineering scaffolds and soft machines. However, the weak bonding between hydrogels and solids hampers functionality. Here, a versatile strategy to develop mechanically robust solid?hydrogel hybrid materials using surface embedded radicals generated through plasma immersion ion implantation (PIII) of polymeric surfaces is reported. Evidence is provided that the reactive radicals play a dual role: inducing surface‐initiated, spontaneous polymerization of hydrogels; and binding the hydrogels to the surfaces. Acrylamide and silk hydrogels are formed and covalently attached through spontaneous reactions with the radicals on PIII activated polymer surfaces without cross‐linking agents or initiators. The hydrogel amount increases with incubation time, monomer concentration, and temperature. Stability tests indicate that 95% of the hydrogel is retained even after 4 months in PBS solution. T‐peel tests show that failure occurs at the tape?hydrogel interface and the hydrogel‐PIII‐treated PTFE interfacial adhesion strength is over 300 N m^?1. Cell assays show no adhesion to the as‐synthesized hydrogels; however, hydrogels synthesized with fibronectin enable cell adhesion and spreading. These results show that polymers functionalized with surface‐embedded radicals provide excellent solid platforms for the generation of robust solid?hydrogel hybrid structures for biomedical applications.