Radiation synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone/acrylic acid) and poly(N‐vinyl‐2‐pyrrolidone/acrylamide) hydrogels for some metal‐ion separation

Two different hydrogels, prepared from N‐vinyl‐2‐pyrrolidone/acrylic acid (NVP/AAc) and N‐vinyl‐2‐pyrrolidone/acrylamide (NVP/AAm), were studied for the separation and extraction of some heavy‐metal ions from wastewater. The hydrogels were prepared by the γ‐radiation‐induced copolymerization of the aforementioned binary monomer mixtures. Further modification was carried out for the NVP/AAc copolymer through an alkaline treatment to improve the swelling behavior by the conversion of the carboxylic acid groups into its sodium salts. The thermal stability and swelling properties were also investigated as functions of the N‐vinyl‐2‐pyrrolidone content. The characterization and some selected properties of the prepared hydrogels were studied, and the possibility of their practical use in wastewater treatment for heavy metals such as Cu, Ni, Co, and Cr was investigated. The maximum uptake for a given metal was higher for a treated NVP/AAc hydrogel than for an untreated NVP/AAc hydrogel and was higher for an untreated NVP/AAc hydrogel than for an NVP/AAm hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2642–2652, 2004     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(HEMA‐MAA) hydrogel carrier for oral delivery of insulin

Poly(HEMA‐MAA) hydrogel particles were synthesized by redox free‐radical polymerization using 2‐hydroxyethylmethacrylate, different concentration of methacrylic acid as monomer, ethyleneglycol dimethacrylate as crosslinking agent, and APS/TEMED as free‐radical initiator. Fourier transform infrared spectrum of poly(HEMA‐MAA) hydrogels showed intense absorption peak of carbonyl group at ～ 1700 cm^?1 due to carboxylic acid groups of MAA, peak at ～ 2960 cm^?1 due to CH stretching and vinylic peak at 1700 cm^?1 independent of MAA concentration. Highest swelling percentage 587% was observed in case of poly(HEMA‐MAA) hydrogel synthesized using 30% of MAA while lowest swelling percentage 413% was observed in hydrogel synthesized 10% of MAA at basic pH (8.0). Scanning electron micrograph of copolymeric particles showed the irregular shape of poly(HEMA‐MAA) particles with conglomeration with each due to ionization of carboxylic groups. Insulin was radiolabeled using technetium‐99m radionuclide and the radiolabeling efficiency was found to be 99%. Poly(HEMA‐MAA) hydrogel having 60% of MAA showed the highest insulin loading efficiency of 68% while lowest 37% was observed in case of 10% MAA hydrogel. Insulin release studies showed only 35–65% of insulin was released into the medium from particles at pH 2.5 in 60 min, while insulin release was significantly higher at pH 7.4. Hypoglycemic effect of the 60 and 80 I.U./kg insulin dose loaded in poly(HEMA‐MAA) copolymeric particles were carried out in fasted diabetic rats and highest decrease in blood glucose level from 506 mg/dL to 170 mg/dL was observed within first 3 h. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Effect of the anionic‐group/cationic‐group ratio on the swelling behavior and controlled release of agrochemicals of the amphoteric,superabsorbent polymer poly(acrylic acid‐co‐diallyldimethylammonium chloride)

A series of amphoteric, superabsorbent polymers [poly(acrylic acid‐co‐diallyldimethylammonium chloride)] with different molar ratios of anionic groups to cationic groups were prepared by solution polymerization to investigate their swelling behaviors and the controlled release of agrochemicals. Various factors, including the solution pH, the concentrations of different salt solutions, and the temperature, were studied. The dynamic parameters of hydrogels at different temperatures suggested that diffusion was Fickian at lower temperatures, whereas non‐Fickian diffusion prevailed at higher temperatures. A copolymer hydrogel with a low anionic‐group/cationic‐group ratio showed a higher swelling capacity in water and higher salt tolerance. Also, the anionic‐group/cationic‐group ratio was not the dominant factor in determining the water retention. A poly(acrylic acid‐co‐diallyldimethylammonium chloride) hydrogel could control the release of agrochemicals effectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 986–991, 2006     

Synthesis and characterization of poly{N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid} hydrogels for drug delivery

A novel pH‐sensitive hydrogel system composed of itaconic acid (IA) and N‐[3‐(dimethylamino) propyl] methacrylamide was designed. This system was prepared by aqueous copolymerization with N,N‐methylene bisacrylamide as a chemical crosslinker. The chemical structure of the hydrogels was characterized by Fourier transform infrared (FTIR) spectroscopy. The microstructure and morphology of the hydrogels were evaluated by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The SEM study of hydrogels on higher magnification revealed a highly porous morphology with uniformly arranged pores ranging from 40 to 200 μm in size. XRD analysis revealed the amorphous nature of the hydrogels, and it was found that an increase in the IA content in the monomer feed greatly reduced the crystallinity of the hydrogels. Swelling experiments were carried out in buffer solutions at different pH values (1.2–10) at 37°C ± 1°C to investigate their pH‐dependent swelling behavior and dimensional stability. An increase in the acid part (IA) increased the swelling ratio of the hydrogels. Temperature‐sensitive swelling of the hydrogels was investigated at 20–70°C in simulated intestinal fluid. The hydrogels swelled at higher temperatures and shrank at lower temperatures. 5‐Aminosalicylic acid (5‐ASA) was selected as a model drug, and release experiments were carried out under simulated intestinal and gastric conditions. 5‐ASA release from the poly N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid‐80 (PDMAPMAIA‐80) hydrogel was found to follow non‐Fickian diffusion mechanism under gastric conditions, and a super case II transport mechanism was found under intestinal conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) hydrogels: Interactions with surfactants

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) [poly(NIPAM‐co‐SA)] hydrogels were modified with three different kind of surfactants (cationic, anionic, and nonionic) to study the effect on the swelling properties. The structural variation of the surfactant‐modified hydrogels was investigated in detail. The interaction between the surfactants and the hydrogel varies and strictly depends on the surfactant type. The variation in thermal stability of the modified surfactant hydrogels was investigated and compared with unmodified hydrogel. Further, the hydrogel swelling/diffusion kinetic parameters were investigated and diffusion of water into hydrogel was found to be of the non‐Fickian transport mechanism. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3423–3430, 2007     

Synthesis,Characterization, and drug release study of acrylamide‐co‐itaconic acid based smart hydrogel

A new kind of pH and temperature responsive poly(acrylamide‐co‐itaconic acid) hydrogel was prepared by free radical polymerization using ammonium persulfate as initiator and different comonomer ratios. The hydrogels were characterized in terms of chemical composition, swelling‐deswelling behavior, morphology, crystallographic behavior, and drug release properties. All the hydrogels showed high swelling ability in aqueous solutions, the maximum being at pH 7. Swelling decreased on either side of pH 7 (i.e., both in acidic and alkaline region) and increased with increase in temperature. The hydrogel with 10 mol% itaconic acid (IA) absorbed maximum water among the copolymer gels. The cellular structures of the hydrogels were clearly revealed by microscopic analysis and SEM pictures. Swelling of the gels in water followed non‐Fickian type of diffusion principle. The hydrogel was proved to be a controlled release vehicle, for example in drug delivery by using its smart properties. The hydrogel with 10 mol% IA also absorbed maximum amount of drug (ascorbic acid) under study. Incorporation of drug in hydrogel matrix was established from XRD peak analysis. POLYM. ENG. SCI., 55:113–122, 2015. © 2014 Society of Plastics Engineers     

Synthesis and characterization of 2‐hydroxyethylmethacrylate/2‐(3‐indol‐yl)ethylmethacrylamide‐based novel hydrogels as drug carrier with in vitro antibacterial properties

In this study, a new cationic monomer 2‐(3‐indol‐yl)ethylmethacrylamide (IEMA) derived from tryptamine was synthesized in a single step and characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR. Then, one‐step preparation of novel poly[2‐hydroxyethylmethacrylate‐c‐2‐(3‐indol‐yl)ethylmethacrylamide], or p(HEMA‐c‐IEMA), copolymeric hydrogels has been performed successfully with IEMA and 2‐hydroxyethylmethacrylate (HEMA) as monomers using free radical aqueous polymerization. The hydrogels were characterized with scanning electron microscopy, FTIR, elemental analysis, thermogravimetric analysis, and texture profile analysis instruments. p(HEMA‐c‐IEMA) hydrogels were used for swelling, diffusion, drug release, and antibacterial activity studies. The drug‐release behavior of the hydrogels was determined as a function of time at 37 °C in pH 1.2 and 7.2. The swelling and drug‐release studies showed that an increased IEMA amount caused a higher increase in swelling and drug‐release values. Additionally, zero‐order, first‐order, and Higuchi equation kinetic models were applied to the drug‐release data, and the data fit well in the Higuchi model, and the Peppas power‐law model was applied to the release mechanism. Finally, the antibacterial activities of the hydrogels were screened against Gram‐positive bacteria (Bacillus cereus and Staphylococcus aureus) and Gram‐negative bacteria (Escherichia coli and Salmonella typhimurium). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45550.     

Bioerodible hydrogels based on 2‐hydroxyethyl methacrylate: Synthesis and characterization

Biocompatible polymers with specific shape and tailored hydrogel properties were obtained by polymerization of mixtures of 2‐hydroxyethyl methacrylate (HEMA) with 1–8 wt % ethylene glycol dimethacrylate (EGDMA) or tetra(ethylene glycol) diacrylate (TEGDA) as crosslinking agents, by using a redox initiator. Introduction of charged positive and negative groups was easily achieved by direct polymerization of appropriate monomer mixtures and by chemical transformation of preformed hydrogels. Investigation of the swelling behavior of the prepared hydrogels evidenced an appreciable dependence on both solvent type and polymer chemical structure. Additionally, the solvation process resulted in being controlled by solvent diffusion, according to a Fickian II mechanism. The presence of several types of water with different melting behavior was observed in fully swollen hydrogels. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2729–2741, 2002     

Synthesis of copolymeric hydrogels using gamma radiation and their utilization in the removal of some dyes in wastwater

Copolymer hydrogels were prepared by γ‐radiation copolymerization of maleic acid (MA) and 2‐hydroxyethylacrylate (HEA) or acrylamide (AAm). The effect of AAm/MA and HEA/MA composition and irradiation dose on the gel fraction yield in the prepared hydrogels was determined. It was found that as the content of MA increased, the gel fraction yield decreased. The increase of irradiation dose resulted in increasing the crosslinked network structure and consequently the gel percent. The parameters of equilibrium swelling, maximum swelling, initial swelling rate, diffusion exponent, and diffusion coefficient of the hydrogels were calculated and evaluated, and it was found that water diffusion to the hydrogels generally was a non‐Fickian diffusion type. Characterization of the prepared hydrogels was studied and accordingly the possibility of its practical use in the treatment of waste dyes from aqueous solution was studied. The effect of treatment time, the pH of the feed solution, initial feed concentration, and temperature on the dye uptake was also investigated. The maximum uptake of the investigated dyes was higher for HEA/MA hydrogel than that for AAm/MA hydrogel. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3720–3731, 2006     

Synthesis and properties of radiation‐induced acrylamide–acrylic acid hydrogels

Acrylamide (AAm)/acrylic acid (AAc) hydrogels in the cylindirical form were prepared by γ‐irradiating binary systems of AAm/AAc with 2.6–20.0 kGy γ‐rays. The effect of the dose and relative amounts of AAc and pH on the swelling properties, diffusion behavior of water, diffusion coefficients, and network properties of hydrogel systems was investigated. The swelling capacities of AAm/AAc hydrogels were in the range of 1000–3000%, while poly(acrylamide) (PAAm) hydrogels swelled in the range of 450–700%. Water diffusion into hydrogels was found to be non‐Fickian‐type diffusion. Diffusion coefficients of AAm/AAc hydrogels were found between 0.79 × 10^?5 and 2.78 × 10^?5 cm² min^?1. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3570–3580, 2002     

Synthesis and characterization of a porous poly(hydroxyethylmethacrylate‐co‐ethylene glycol dimethacrylate)‐based hydrogel device for the implantable delivery of insulin

Poly(hydroxyethylmethacrylate‐co‐ethylene glycol dimethacrylate) [poly(HEMA‐co‐EGDMA)]‐based hydrogel devices were synthesized by a free‐radical polymerization reaction with 2‐hydroxyethylmethacrylate as the monomer, different concentrations of ethylene glycol dimethacrylate (EGDMA) as the crosslinking agent, and ammonium persulfate/N,N,N′,N′‐tetra‐methyl ethylenediamine as the free‐radical initiator. The porosity of the poly(HEMA‐co‐EGDMA) hydrogels was controlled with water as the porogen. The Fourier transform infrared spectrum of poly(HEMA‐co‐EGDMA) showed absorption bands associated with ? C?O stretching at 1714 cm^?1, C? O? C stretching vibrations at 1152 cm^?1, and a broad band at 3500–3800 cm^?1 corresponding to ? OH stretching. Atomic force microscopy studies showed that the hydrogel containing 67% water had pores in the range of 3500–9000 nm, whereas the hydrogel containing 7% water did not show measurable pores. The hydrogel synthesized with 1% EGDMA showed 50% thallium‐201 release within the first 30 min and about 80% release within 60 min. In vitro insulin‐release studies suggested that the hydrogel with 27% water showed sustained release up to 120 min, whereas the hydrogels with 47 and 67% water showed that nearly all of the insulin was released within 60 min. Hydrogel devices synthesized with 27% water and filled with insulin particles showed sustained release for up to 8 days, whereas the hydrogels synthesized with 47 and 67% water released insulin completely within 3 days of administration. Animal studies suggested that the hydrogel devices synthesized with 27% water and filled with insulin‐loaded particles (120 IU) were able to control blood glucose levels for up to 5 days after implantation. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A comparative study of swelling properties of hydrogels based on poly(acrylamide‐co‐methyl methacrylate) containing physical and chemical crosslinks

Poly (acrylamide‐co‐methyl methacrylate) hydrogels of different ratios were prepared by using chemical and physical crosslinks to study the effect of nature of crosslinks on swelling behavior of hydrogels. The chemically crosslinked gels were prepared by using NN′‐methylene bis acrylamide, while physically crosslinked hydrogels were prepared by precipitation polymerization method, using dioxane as solvent. Detailed swelling kinetics such as swelling ratio, transport exponent n, diffusion coefficient D and the effect of pH on equilibrium swelling studies. The study revealed that the nature of crosslinks alter the swelling characteristics of the hydrogel. In chemically crosslinked hydrogels the water transport is Fickian in nature, while in the case of the physically crosslinked hydrogels the water transport mechanism is anomalous indicating major change in relaxation mechanism due to nature of crosslinks. The results also indicate that with increasing acrylamide content the swelling ratio of the hydrogels were also increased, but the transport exponent n remains nearly constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 779–786, 2003     

Preparation and swelling behaviors of porous hemicellulose‐g‐polyacrylamide hydrogels

Novel porous hydrogels were successfully synthesized from hemicelluloses (HCs) and acrylamide (Am) with poly(ethylene glycol) (PEG) as the porogen. The prepared hydrogels were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy (SEM). The results show that the used PEG was not involved in the formation process of the hydrogels, and the HC‐g‐polyacrylamide hydrogels displayed a higher thermal stability than the hemicellulosic polymer. SEM analysis confirmed that the prepared hydrogels had porous structures. The effects of the Am/HC ratio, the amount and molecular weight of PEG and the amount of the crosslinker N,N‐methylene bisacrylamide on the swelling ratio of the prepared hydrogels were investigated in detail. The experimental data were fitted with the exponential heuristic equation and the Schott second‐order dynamic equation. The diffusion of water molecules into the hydrogel network was found to be non‐Fickian in behavior, and the swelling kinetics could be described by the Schott second‐order dynamic equation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Boronic acid–functionalized HEMA‐based gels for nucleotide adsorption

A gel matrix that could be used as a sorbent for the specific adsorption of nucleotides was prepared by the radical copolymerization of 2‐hydroxyethylmethacrylate (HEMA) with a relatively new boronic acid–functionalized monomer (4‐vinylphenylboronic acid, VPBA). The synthesis of a gel could be achieved at a reasonably low temperature (+4°C) by using potassium persulfate and tetramethylethylenediamine as the redox system and methylenebisacrylamide (MBA) as the crosslinker. To increase the diol binding affinity of boronic acid–carrying gels, two different amine‐containing monomers [N‐3‐(dimethylamino)propylmethacrylamide, DMAPM and 2‐(dimethylamino)ethylmethacrylate, DMAEM) were also included in the gel‐formation recipe. Then HEMA–VPBA–DMAPM and HEMA–VPBA–DMAEM terpolymer gels were obtained. The boronic acid–functionalized gel matrices with different swelling properties were produced by changing the feed concentrations of VPBA and of the amine‐containing monomers (DMAPM and DMAEM). To test the usability of produced gels as a sorbent in the nucleotide adsorption, β‐nicotinamide adenine dinucleotide (β‐NAD) was selected as a model compound. The results of adsorption experiments indicated that the β ‐NAD adsorption capacity of HEMA‐based gels increased with increasing VPBA feed concentration. Equilibrium adsorption capacities up to 33 mg β‐NAD/g dry gel could be achieved with the DMAPM‐containing boronic acid–functionalized HEMA‐based gels. An increase in the feed concentration of DMAPM resulted in an increase in the β‐NAD adsorption capacity of gels, while a decrease was observed with an increasing feed concentration of the other amine‐containing monomer (DMAEM). © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 268–277, 2000     

Synthesis and characterization of novel poly(acrylamide‐co‐acrylic acid‐co‐2‐hydroxy ethyl actylate) hydrogels: Mathematical approach in investigation of swelling kinetics and diffusion models

In this study, a series of poly(acrylamide‐co‐acrylic acid‐co‐2‐hydroxy ethyl actylate) [AM‐co‐AA‐co‐HEA] hydrogels have been synthesized by varying the acrylic acid (AA)content over eightfold in feed in the range of 33.34–93.76% by keeping other monomer constant. These hydrogels were characterized by FTIR, SEM analysis, elemental analysis, residual acrylic acid analysis, network parameters, and dynamic swelling behavior. The swelling study showed that equilibrium swelling ratio was nonlinearly increased with increasing AA content. Interestingly, the equilibrium swelling ratio decreased from 53.42 to 48.52 for 75–80% AA content hydrogel. The swelling data were found to satisfactorily fit Fick's second law, demonstrating that diffusion rate of water uptake was primarily Fickian. From model fitting, it was observed that early model was applicable for first 30% water absorption, and late model was applicable for latter 70% water absorption for increasing AA content from 33.34–90.90%. For 93.76% AA, early‐time model was extended up to first 50% of water absorption and late model was contracted for latter 50% water absorption, indicating that excessive AA content affects the applicability range of early‐time and late‐time diffusion models for water absorption. Etters model was best applicable to all type of hydrogels and followed over all swelling range. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

pH‐thermoreversible hydrogels. I. Synthesis and swelling behaviors of the (N‐isopropylacrylamide‐co‐acrylamide‐co‐2‐hydroxyethyl methacrylate) copolymeric hydrogels

A series of pH‐thermoreversible hydrogels that exhibited volume phase transition was synthesized by various molar ratios of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and 2‐hydroxyethyl methacrylate (HEMA). The influence of environmental conditions such as temperature and pH value on the swelling behavior of these copolymeric gels was investigated. Results showed that the hydrogels exhibited different equilibrium swelling ratios in different pH solutions. Amide groups could be hydrolyzed to form negatively charged carboxylate ion groups in their hydrophilic polymeric network in response to an external pH variation. The pH sensitivities of these gels also depended on the AAm content in the copolymeric gels; thus the greater the AAm content, the higher the pH sensitivity. These hydrogels, based on a temperature‐sensitive hydrogel, demonstrated a significant change of equilibrium swelling in aqueous media between a highly solvated, swollen gel state and a dehydrated network response to small variations of temperature. pH‐thermoreversible hydrogels were used for a study of the release of a model drug, caffeine, with changes in temperature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 221–231, 1999     

Preparation and properties of modified PHEMA hydrogel with sulfonated PEG graft

A novel poly(ethylene glycol) (PEG) macromer with a methacryloyl and sulfonic acid group at each end of the chain was prepared. Modified hydroxyethyl methacrylate (HEMA) based hydrogels were synthesized by crosslinking polymerization of HEMA in the presence of the above‐mentioned PEG macromer. The effect of the sulfonated PEG graft was examined by comparing the swelling properties with those of a pure poly(hydroxyethyl methacrylate) (PHEMA) hydrogel. The modified PHEMA hydrogel exhibited increasing water absorbency with increasing sulfonated PEG content up to 15 wt %. These hydrogels with the sulfonated PEG graft exhibited a more hydrophilic character than the pure PHEMA gel. Also the swelling degree varied slightly with pH, showing increased swelling at higher pH probably due to the presence of the anionic sulfonate group on the PEG end chain. In addition, the protein adsorption test showed a lower level of fibrinogen adsorption from the sulfonated poly(ethylene glycol) (SPEG) modified gel than on the homo PHEMA hydrogel. Interestingly, scanning electron microscopy showed that the porous and rather uniform morphology of the gels changed with increasing sulfonated PEG content in PHEMA. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2484–2489, 2007     

Preparation and application in drug controlled delivery of pH‐sensitive P(CE‐co‐DMAEMA‐co‐MEG) hydrogel

A pH‐sensitive hydrogel [P(CE‐co‐DMAEMA‐co‐MEG)] was synthesized by the free‐radical crosslinking polymerization of N,N‐dimethylaminoethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate(MPEG‐Mac) and methoxyl poly(ethylene glycol)‐poly(caprolactone)‐methacryloyl methchloride (PCE‐Mac). The effects of pH and monomer content on swelling property, swelling and deswelling kinetics of the hydrogels were examined and hydrogel microstructures were investigated by SEM. Sodium salicylate was chosen as a model drug and the controlled‐release properties of hydrogels were pilot studied. The results indicated that the swelling ratios of the gels in stimulated gastric fluids (SGF, pH = 1.4) were higher than those in stimulated intestinal fluids (SIF, pH = 7.4), and followed a non‐Fickian and a Fickian diffusion mechanism, respectively. In vitro release studies showed that its release rate depends on different swelling of the network as a function of the environmental pH and DMAEMA content. SEM micrographs showed homogenous pore structure of the hydrogel with open pores at pH 1.4. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40737.     

A new composite sorbent for water and dye uptake: Highly swollen acrylamide/2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid/clay hydrogels crosslinked by 1,4‐butanediol dimethacrylate

A novel type of highly swollen hydrogels based on acrylamide (AAm) with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) and clay such as bentonite (Bent) crosslinked by 1,4‐butanediol dimethacrylate (BDMA) was prepared by free radical solution polymerization in aqueous media. Water uptake and dye sorption properties of polyelectrolyte AAm/AMPS hydrogels and AAm/AMPS/Bent composite hydrogels were investigated as a function of composition to find materials with swelling and sorption properties. FTIR analyses were made. Swelling experiments were performed in water and dye solution at 25°C, gravimetrically. Highly swollen AAm/AMPS and AAm/AMPS/Bent hydrogels were used in experiments on sorption of water‐soluble monovalent cationic dye such as Lauths violet “LV, (Thionin).” Swelling of AAm/AMPS hydrogels was increased up to 1,920–9,222% in water and 867–4,644% in LV solutions, while AAm hydrogels swelled 905% in water and swelling of AAm/AMPS/Bent hydrogels was increased up to 2,756–10,422% in water and 1,200–3,332% in LV solutions, while AAm/Bent hydrogels swelled 849% in water. Some swelling kinetic and diffusional parameters were found. Water and LV diffusion into hydrogels was found to be non‐Fickian in character. For sorption of cationic dye, LV into AAm/AMPS and AAm/AMPS/Bent hydrogel was studied by batch sorption technique at 25°C. The amount of the dye sorbed per unit mass removal effiency and partition coefficient of the hydrogels was investigated. The influence of AMPS content in the hydrogels to sorption was examined. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers