Synthesis and crystal structure of [2-NH2-5-CH3C5H4N]4P4O12·6H2O

Chemical preparation, crystal structure, IR absorption and thermal analysis of a new cyclotetraphosphate [2-NH₂-5-CH₃C₅H₄N]₄P₄O₁₂·6H₂O are reported. This compound is triclinic P-1 with unit-cell parameters: a = 10.206(5), b = 11.778(1), c = 9.991(4) Å,  = 110.40(6), β = 117.74(6), γ = 86.41(3)°, V = 989.1(8) Å³, Z = 1, D_x = 1.445 g cm⁻³. The structure has been determined and refined to R = 0.034 and R_w = 0.044, using 3663 independent reflections. The ring anions and water molecules form layers spreading around (a, b + c) planes via OHO hydrogen bonds. Between them are anchored 2-amino-5-methylpyridium cations, which establish H-bonds to interconnect the different adjacent layers and so contribute to the cohesion of the three-dimensional network. Tautomerization of (C₆H₉N₂)⁺ groups was evidenced in the present structure.     

Synthesis, structure refinement and characterisation of a new oxyphosphate Mg0.50TiO(PO4)

A new titanium oxyphosphate Mg_0.50TiO(PO₄) has been synthesized and characterized by several physical techniques: X-ray diffraction, ³¹P MAS-NMR, Raman diffusion, infrared absorption and diffuse reflectance spectroscopy. It crystallizes in the monoclinic system with unit cell parameters: a = 7.367(9), b = 7.385(8), c = 7.373(9) Å, β = 120.23(1), with the space group P2₁/c (no. 14), Z = 4. The crystal structure has been refined by the Rietveld method using X-ray powder diffraction. The conventional R indices obtained are R_wp = 0.138, R_p = 0.096 and R_B = 0.0459. The structure of Mg_0.50TiO(PO₄) consists of infinite chains of corner-shared [TiO₆] octahedra parallel to the c-axis, crosslinked by corner-shared [PO₄] tetrahedra. These infinite chains have alternating short (1.74 Å) and long (2.26 Å) TiO bonds and are similar to those found in titanium oxyphosphate M^II_0.50TiO(PO₄) (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺). The magnesium atom is located in an antiprism between two [TiO₆] octahedra. ³¹P MAS NMR showed only a single ³¹P resonance line, in a good agreement with the crystal structure. Raman and IR spectra show strong bands respectively at 765 and 815 cm⁻¹, attributed to the vibration of TiOTiO bonds in the infinite chains. The gap due to the Oxygen-Titanium(IV) charge transfer is 3.37 eV.     

Synthesis and characterization of a new 2,4,6-triaminopyridinium dihydrogendiphosphate dihydrate (C4H8N5)2H2P2O7·2H2O

Structural properties of the 2,4,6-triaminopyridinium dihydrogendiphosphate dihydrate are discussed on the basis of an X-ray structure investigation. (C₄H₈N₅)₂H₂P₂O₇·2H₂O is monoclinic, C2/c, with a = 10.414(1) Å, b = 13.365(1) Å, c = 13.736(2) Å, β = 98.39(4)°, and Z = 4. The structure has been solved by a direct method and refined to a reliability R factor of 0.0375 (R_w = 0.0961) using 2751 independent reflections. The structural arrangement can be described as inorganic infinite ribbons, , spreading along the c direction; the organic groups, [C₄H₈N₅]⁺, link the precedent ribbons, via their hydrogen bonds, to form a three-dimensional network. The present work, deals with crystal structure, thermal behavior and IR analysis of this new compound.     

PEG-300 assisted hydrothermal synthesis of 4ZnO·B2O3·H2O nanorods

4ZnO·B₂O₃·H₂O is commonly used as a flame-retardant filler in composite materials. The microstructure of the powder is of importance in its applications. In our study, for the first time, one-dimensional (1D) nanostructure of 4ZnO·B₂O₃·H₂O with rectangle rod-like shape has been synthesized by a hydrothermal route in the presence of surfactant polyethylene glycol-300 (PEG-300). The nanorods have been characterized by X-ray powder diffraction (XRD), inductively coupled plasma with atomic emission spectroscopy (ICP-AES), thermogravimetry (TG) and differential thermal analysis (DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) equipped with selected area electron diffraction (SAED) as well as high-resolution transmission electron microscopy (HRTEM). These nanorods are about 70 nm in thickness, 150-800 nm in width and have lengths up to a few microns. 4ZnO·B₂O₃·H₂O nanorods crystallize in the monoclinic space group P2₁/m, a = 6.8871(19) Å, b = 4.9318(10) Å, c = 5.7137(16) Å, β = 98.81(21)° and V = 191.779(71) Å³.     

Synthesis and crystal structure of [3,5-(CH3O)2C6H3NH3]4P4O12·4H2O

The chemical preparation and crystal structure are given for a new organic-cation cyclotetraphosphate. This compound is triclinic P-1 with the following unit cell parameters: a=7.857(1) Å, b=8.877(2) Å, c=17.271(3) Å, α=93.94(1)°, β=101.75(2)°, γ=103.72(1)° V=1137.0(4) Å³, Z=1 and ρ_cal=1.467 g cm⁻³. The crystal structure has been determined and refined to R=0.037, using 6291 independent reflections. The atomic arrangement can be described by inorganic layers parallel to the (0 0 1) planes, between which the organic entities are located.     

Chemical preparation, crystal structure and characterization of the new sodium ytterbium cyclotriphosphate Na3Yb(P3O9)2·9H2O

Chemical preparation and crystal structure are reported for a new lanthanide cyclotriphosphate Na₃Yb(P₃O₉)₂·9H₂O. This salt crystallizes in the trigonal system, space group with the following parameters: a = 30.933(2), c = 12.8282(5) Å. The crystal structure was refined to R₁ = 0.0432 using 1782 reflections with I > 2 σ(I). In the Na₃Yb(P₃O₉)₂·9H₂O structure, the phosphoric ring anions, located around the axis are interconnected by YbO₈ dodecahedra and NaO₆ and NaO₇ polyhedra to build, around the threefold axis, large channels parallel to the c axis. All the nine water molecules in the present arrangement participate in the coordination spheres of the associated cations. The thermogravimetric analysis shows that the removal of these water molecules occurs in three stages between 305 and 736 K.The vibrational study by IR absorption spectroscopy of Na₃Yb(P₃O₉)₂·9H₂O is also reported.     

Crystal structure and characterization of [2,5-(CH3O)2C6H3NH3]4P4O12·2H2O

The preparation, crystal structure, TG–DTA analysis and spectroscopy investigation are reported for the 2,5-dimethoxy phenyl ammonium cyclotetraphosphate dihydrate [2,5-(CH₃O)₂C₆H₃NH₃]₄P₄O₁₂·2H₂O. This new compound is triclinic P with unit cell dimensions: a = 7.438(5) Å, b = 11.841(7) Å, c = 12.354(4) Å,  = 96.61(4)°, β = 98.35(4)°, γ = 102.60(6)°, Z = 1 and V = 1038.0(1) Å³. Its crystal structure has been determined and refined to R = 0.049, with 5128 independant reflections. The structure can be described by rows of P₄O₁₂ ring anions along the a axis; between these rows are located the organic groups, connected to them by hydrogen bonds.     

Synthesis, molecular structure, and characterization of a new 3D-layered inorganic-organic hybrid material: [d/l-C6H13O2N-H]3[(PO4)W12O36]·4.5H2O

A new 3D-layered inorganic-organic hybrid [d/l-C₆H₁₃O₂N-H]₃[(PO₄)W₁₂O₃₆]·4.5H₂O (1), as racemic material in the solid phase, has been synthesized and fully characterized by elemental microanalysis, single crystal X-ray diffraction, and infrared, Raman, and proton nuclear magnetic resonance spectroscopes. The most unique structural feature of 1 is its three-dimensional inorganic infinite tunnel-like framework that results in weak van der Waals interactions along the a-axis. A weak interlayer interaction between the titled layers provides a desirable condition to explore its potential as a host in a host-guest complex. The racemization has been observed in the crystal structure with the centric space group (P2₁/c). The latter consists of α-[(PO₄)W₁₂O₃₆]³⁻and [d/l-C₆H₁₃O₂N-H]⁺ moieties with water molecules linked together by a complex network of hydrogen bond interactions.     

Synthesis, crystal structure and thermal decomposition of [La2(CH3CH2COO)6·(H2O)3]·3.5H2O precursor for high-k La2O3 thin films deposition

Lanthanum acetylacetonate La(C₅H₇O₂)₃·xH₂O has been used in the preparation of the precursor solution for the deposition of polycrystalline La₂O₃ thin films on Si(1 1 1) single crystalline substrates. The precursor chemistry of the as-prepared coating solution, precursor powder and precursor single crystal have been investigated by Fourier Transformed Infrared Spectroscopy (FTIR), differential thermal analysis coupled with quadrupole mass spectrometry (TG-DTA-QMS) and X-ray diffraction. The FTIR and X-ray diffraction analyses have revealed the complex nature of the coating solution due to the formation of a lanthanum propionate complex. The La₂O₃ thin films deposited by spin coating on Si(1 1 1) substrate exhibit good morphological and structural properties. The films heat treated at 800 °C crystallize in a hexagonal phase with the lattice parameters a = 3,89 Å and c = 6.33 Å, while at 900 °C the films contain both the hexagonal and cubic La₂O₃ phase.     

Synthesis and crystal structure of Sr10Al6O19: a derivative of the perovskite structure type in the system SrO-Al2O3

Sr₁₀Al₆O₁₉ is monoclinic, space group C12/c1, a=34.5823(21) Å, b=7.8460(6) Å, c=15.7485(9) Å, β=103.68(1)°, V=4151.9(7) Å³, Z=8. The structure has been solved from a single crystal diffraction dataset by direct methods and subsequently refined by a full-matrix least-squares process to a residual index of R(|F|)=0.038 for 2537 observed reflections with I>2σ(I). The compound is an oligoaluminate containing highly puckered [Al₆O₁₉]-groups of corner-sharing tetrahedra; it is the first purely aluminate cluster of this type, but it resembles the [□₆O₁₉]-group recently found in α-Sr₁₀□₆O₁₉. Linkage between the hexamers is provided by 11 crystallographically different strontium atoms located in planes parallel (1 0 0). They are coordinated by six-eight next oxygen neighbours. The structure can be derived from perovskite, ABO₃, by introducing ordered vacancies into the substructure of the oxygen atoms. The A-sites in Sr₁₀Al₆O₁₉ are exclusively occupied by Sr atoms, whereas strontium and aluminum atoms reside on the B-positions in the ratio 1:3. The relationship with perovskite can be expressed in the crystal chemical formula Sr(Al_3/4Sr_1/4)(O_19/8□_5/8).     

Synthesis and crystal structure of Cu2NiO(B2O5) and Cu2MgO(B2O5)

A transport reaction synthesis technique has been used to prepare single crystals of two pyroborate compounds having the formulas Cu₂NiO(B₂O₅) and Cu₂MgO(B₂O₅). The two compounds are isostructural and crystallize in the monoclinic space group P2₁/c. Cu₂NiO(B₂O₅): a=3.2003(10), b=14.775(3), c=9.097(3), β=93.28(4), V=429.4(2) Å³, Z=4; and Cu₂MgO(B₂O₅): a=3.2401(6), b=14.790(2), c=9.147(2), β=94.88(2), V=436.7(2) Å³, Z=4. The structures of Cu₂NiO(B₂O₅) and Cu₂MgO(B₂O₅) were, respectively, refined from 804 and 1000 independent reflections to the final residuals R1=0.0366, wR2=0.0911 and R1=0.0231, wR2=0.0644. Both compounds exhibit a chevron-like structure built up of ribbons, made of edge-connected copper and nickel-oxygen polyhedra, running along the (1 0 0) direction. These ribbons are connected from one another via oxygen atoms and the cohesion of the three-dimensional network is ensured by [B₂O₅] entities. Cu in part occupies the position for Ni or Mg, so that the compounds actually are solid solution compounds. Ni or Mg atoms are octahedrally coordinated by oxygen, while the two pure Cu sites show [4] and [4+1] coordination, for Cu(1) and Cu(2), respectively. The ELNES B-K edge spectra for the two compounds support that the borate group present is [B₂O₅].     

Crystal structure of a new organic condensed phosphate (C6H9N3O)H2P2O7

Crystals of a new organic compound, the isonicotinic acid hydrazide dihydrogendiphosphate, (C₆H₉N₃O)H₂P₂O₇ (denoted INHDP) were prepared and grown at room temperature. The INHDP crystallizes in the triclinic system with the space group. Its unit cell dimensions are: a = 7.316(3) Å, b = 7.783(3) Å, c = 10.802(4) Å, α = 82.41(3)°, β = 75.19(3)°, γ = 72.57(3)°, with V = 566.3(4) Å³ and Z = 2. Crystal structure has been determined and refined to a reliability R factor of 0.0389. The atomic arrangement can be described as inorganic infinite ribbons of H₂P₂O₇²⁻ anions spreading parallel to the b-axis. These ribbons are themselves interconnected by the organic (C₆H₉N₃O)⁺ cations so as to build a three dimensional arrangement. In the present work, we describe the crystal structure, thermal behaviour and IR analysis of this new compound.     

Synthesis and formation mechanism of Cu3V2O7(OH)2·2H2O nanowires

Cu₃V₂O₇(OH)₂·2H₂O nanowires have been synthesized in high yield through a simple and facile low-temperature hydrothermal approach without any template or surfactants. XRD, TG, FE-SEM, TEM and HRTEM were used to characterize the product. The results indicated that the product consisted of wirelike crystals about 80 nm in diameter and length up to several micrometers. The formation of wirelike structure of Cu₃V₂O₇(OH)₂·2H₂O depended crucially on the reaction time and pH value of the precursor suspensions. The optical absorption spectrum indicates that the Cu₃V₂O₇(OH)₂·2H₂O nanowires have a direct band gap of 1.94 eV.     

Synthesis and crystal structure of two new oxychalcogenides: Eu5V3S6O7 and La10Se14O

The crystal structure determination of two new oxychalcogenides, namely Eu₅V₃S₆O₇ and La₁₀Se₁₄O, is reported. Eu₅V₃S₆O₇ crystallizes in the orthorhombic symmetry (space group Pmmn) with unit cell parameters (in Å): a=17.463(2), b=3.6732(4), and c=10.007(1). This compound is isotypic with the Ln₅V₃S₆O₇ compounds (Ln=La-Nd), and its structure has been refined to R1=0.0248. Eu atoms, which are nine-coordinated by O and S atoms, are associated to form ribbons that are interconnected by [VS₄O₂] octahedrons. La₁₀Se₁₄O crystallizes in the tetragonal symmetry (space group I4₁/acd) with unit cell parameters (in Å): a=15.926(2), and c=21.061(5). The structure was refined to R1=0.0347. La₁₀Se₁₄O is isostructural with the Pr₁₀X₁₄O compounds (X=S and Se). The only structure difference is observed for one La site that is found split, in connection with a mixed O/Se site filling.     

Soft chemistry synthesis and crystal structure of MgxCu3−xV2O6(OH)4·2H2O

Mg_xCu_3−xV₂O₆(OH)₄·2H₂O (x ∼ 1), with similar crystal structure as volborthite Cu₃V₂O₇(OH)₂·2H₂O, was successfully prepared by a soft chemistry technique. The method consists of mixing magnesium nitrate and copper nitrate with a boiling solution of vanadium oxide (obtained by reacting V₂O₅ with few mL of 30 vol.% H₂O₂ followed by addition of distilled water). When ammonium hydroxide NH₄OH 10% was added (pH 7.8), a green yellowish precipitate was obtained. Using X-ray powder diffraction data, its crystal structure has been determined by Rietveld refinement. Compared to volborthite, the vanadium coordination changes from tetrahedral VO₄ to trigonal bipyramidal VO₅, and magnesium replaces copper, preferably, in the less distorted octahedron. At 300 °C, the phase formed is similar to the high pressure (HP) monoclinic Cu₃V₂O₈ phase. However at higher temperature, 600 °C, the phase obtained is different from known Cu₃V₂O₈ phases.     

Chemical preparation, crystallographic characterization, thermal behavior and IR studies of a new cyclotriphosphate SrTlP3O9·3H2O

Chemical preparation, crystallographic characterization, thermal behavior and IR studies are given for two new cyclotriphosphates SrTlP₃O₉·3H₂O and SrTlP₃O₉. SrTlP₃O₉·3H₂O is orthorhombic, space group Pnma, with the following unit-cell dimensions: a=9.147(7) Å, b=8.180(7) Å, c=15.458(2) Å and Z=4. The total dehydration of SrTlP₃O₉·3H₂O leads between 300 and 650°C to its anhydrous form SrTlP₃O₉. SrTlP₃O₉ is monoclinic, space group P2₁/m or P2₁, with the following unit-cell dimensions: a=14.544(2) Å, b=8.639(1) Å, c=7.727(1) Å, β=102.05(1)° and Z=4. The thermal behavior has been investigated and interpreted in agreement with IR absorption spectrometry and X-ray diffraction experiments. We calculated the 30 normal frequencies of the P₃O₉ ring with Cs symmetry and proposed the interpretation of the vibrational spectrum of SrTlP₃O₉·3H₂O. The vibrations were assigned and precised to each frequency for different atoms of the ring on the basis of the results of the theoretical isotopic substitutions and in the light of the crystalline structure of the isotypic compounds, SrM^IP₃O₉·3H₂O (M^I=Rb⁺, K⁺ and NH₄⁺), of SrTlP₃O₉·3H₂O.     

Synthesis of non-stoichiometric Bi2O4−x by oxidative precipitation

Bi₂O_4−x, a Bi mixed-valence phase was prepared at 95 °C, by a precipitation process, in a basic medium with a highly oxidizing K₂S₂O₈/Na₂S₂O₈. This phase has a low thermal stability as it decomposes below 400 °C in a multiple step process by some O₂ losses prior to finally transforming into γ-Bi₂O₃. The as-prepared powders are 50-60 nm in size with a narrow size distribution. Optical spectra of Bi₂O_4−x exhibit a broad absorption band with a band gap of ∼1.4 eV as compared to 2.61 eV for Bi₂O₃. The composition of this non-stoichiometric phase, which crystallizes in cubic fluorite related structure with a cell parameter of 5.538(3) Å, is Bi₂O_{3.65 ± 0.10}.     

The system Ag2Se-Ho2Se3 in the 0-50 mol.% Ho2Se3 range and the crystal structure of two polymorphic forms of AgHoSe2

The phase diagram of the Ag₂Se-Ho₂Se₃ system in the range of 0-50 mol.% Ho₂Se₃ was constructed with the results of XRD and differential thermal analysis. A dimorphous compound exists in the system at the equimolar ratio of the components. The investigated part of the Ag₂Se-AgHoSe₂ diagram is of the eutectic type with the eutectic coordinates 7 mol.% Ho₂Se₃ and 1125 K. The crystal structure of the high-temperature modification of AgHoSe₂ was studied by X-ray powder diffraction method. α-AgHoSe₂ is described as a NaCl structure (space group ) with the lattice parameter а = 5.7623(3) Å. Atomic parameters were calculated in the isotropic approximation (R_I = 0.0434 and R_Р = 0.0636). The crystal structure of β-AgHoSe₂ was determined by X-ray structure analysis and was refined to R = 0.0487.     

The calcium based fullerenoïd Ca33Bi22.7Al48O139.05: An enantiomorphic structure of strontium aluminate

The aluminate Ca₃₃Bi_22.7Al₄₈O_139.05, having an enantiomorphic structure from the first fullerenoid oxide Sr₃₃Bi_24.25Al₄₈O_141.375, has been isolated. The structure, solved by X-ray single crystal diffraction is built up from an aluminate framework made of AlO₄ tetrahedra connected through corners and forming a huge “Al₈₄O₂₁₀” sphere where the Al atoms are disposed like the carbon atoms in the C₈₄ fullerene. Difference between the Ca and Sr-phases lies in the composition and the structure of the [Bi_xO_y] cluster stuffing the aluminate sphere. In the Ca-phase, the cluster formulated “Bi_22.7O_45.05” can be ideally described as built up from BiO₆ octahedra, BiO₄L trigonal bipyramids and BiO₃L tetrahedra. The EDS chemical analyses reveal a large domain of cationic stoichiometry, as observed for the Sr-phase. The high resolution electron microscopy (HREM) images of regular zones are in good agreement with the images calculated from the single crystal structure.     

2D-network of inorganic-organic hybrid material built on Keggin type polyoxometallate and amino acid: [L-C2H6NO2]3[(PO4)Mo12O36]·5H2O

A new inorganic-organic hybrid material based on polyoxometallate, [L-C₂H₆NO₂]₃[(PO₄)Mo₁₂O₃₆]·5H₂O, has been successfully synthesized and characterized by single-crystal X-ray analysis, elemental analysis, infrared and ultraviolet spectroscopy, proton nuclear magnetic resonance and differential thermal analysis techniques. The title compound crystallizes in the monoclinic space group, P2₁/c_, with a = 12.4938 (8) Å, b = 19.9326 (12) Å, c = 17.9270 (11) Å, β = 102.129 (1)°, V = 4364.8 (5) Å³, Z = 4 and R₁(wR₂) = 0.0513, 0.0877. The most remarkable structural feature of this hybrid can be described as two-dimensional inorganic infinite plane-like (2D/∞ [(PO₄)Mo₁₂O₃₆]³⁻) which forming via weak Van der Waals interactions along the z axis. The characteristic band of the Keggin anion [(PO₄)Mo₁₂O₃₆]³⁻ appears at 210 nm in the UV spectrum. Thermal analysis indicates that the Keggin anion skeleton begins to decompose at 520 °C.