Role of π-π interactions and chain flexibility in dispersion and dynamic-mechanical properties of nanocomposites with multiple wall carbon nanotubes

Two polymers of same functional group were used; one with greater chain flexibility, PA 6.6, and the other with two benzene rings in the main chain, PA 6I-6T (aPA), to evaluate how the structure influences on the nanoparticle dispersion homogeneity and on dynamic-mechanical properties. In the aPA nanocomposites, good dispersion and homogeneous distribution were observed for all CNT concentrations. However, PA 6.6 nanocomposites showed agglomerated regions in all formulations. The interfacial energy of the aPA/CNT was five times lower than that of PA6.6/CNT, resulting in greater compatibility in this nanocomposite. An increase of up to 26% was observed with 2.5% of CNT in aPA nanocomposites storage modulus. In the samples with PA 6.6, the increase was at most 5%. Even with greater flexibility of PA 6.6 macromolecules, the π-π interaction between the aPA aromatic rings and CNTs might be the decisive factor for dispersion improvement and positively influence on the dynamic-mechanical properties of these nanocomposites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48195.     

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

In this study, Al₂O₃–TiC composites synergistically reinforced with multi-walled carbon nanotubes (MWCNTs) and graphene nanoplates (GNPs) were prepared via spark plasma sintering (SPS). The effects of the MWCNT and GNP contents on the phase composition, mechanical properties, fracture mode, and toughening mechanism of the composites were systematically investigated. The experimental results indicated that the composite grains became more refined with the addition of MWCNTs and GNPs. The nanocomposites presented high compactness and excellent mechanical properties. The composite with 0.8 wt% MWCNTs and 0.2 wt% GNPs presented the best properties of all analysed specimens, and its relative density, hardness, and fracture toughness were 97.3%, 18.38 ± 0.6 GPa, and 9.40 ± 1.6 MPa m^1/2, respectively. The crack deflection, bridging, branching, and drawing effects of MWCNTs and GNPs were the main toughening mechanisms of Al₂O₃–TiC composites synergistically reinforced with MWCNTs and GNPs.     

A simple oxidation–reduction process for the activation of a stainless steel surface to synthesize multi-walled carbon nanotubes and its application to phenol degradation in water

Aligned multi-walled carbon nanotubes (MWCNTs) were synthesized directly on a stainless steel surface by surface activation by intense oxidation in air followed by a moderate reduction in H₂ without any wet process. This method is extremely simple compared with conventional ways that need catalyst loading steps or acid pre-etching steps to synthesize carbon nanotubes on stainless steel surfaces. It was found that the length of MWCNT bundles could reach 80 μm when the oxidation step was properly controlled. It was demonstrated that MWCNTs synthesized on stainless steel meshes could be used as a catalyst support to enhance ozone oxidation in the decomposition of phenol in water.     

Effects of tillage systems on soil organic carbon dynamics, structural stability and crop yields in irrigated wheat (Triticum aestivum L.)–cotton (Gossypium hirsutum L.) rotation in semi-arid Zimbabwe

In southern Africa, tillage research has focused on rainfed smallholder cropping systems, while literature on high-input irrigated cropping systems is limited. We evaluated the effects of conventional (CT), minimum (MT) and no-till (NT) tillage systems on soil organic carbon (SOC), bulk density, water-stable aggregates (WSA), mean weighted diameter (MWD) and crop yields in an irrigated wheat–cotton rotation. Soil data were monitored in the first and final year, while yields were monitored seasonally. Average bulk densities (1.5–1.7 Mg m⁻³) were similar among tillage systems, but often exceeded the critical limit (1.60 Mg m⁻³) for optimum root growth. Conversion from CT to MT and NT failed to ameliorate the high bulk densities associated with the alluvial soil. SOC (g kg⁻¹) at 0–15 cm was higher (P < 0.05) under MT (3.9–5.8) and NT (4.2–5.6) than CT (2.9–3.3). Corresponding horizon SOC stocks (Mg C ha⁻¹) for the tillage treatments were; 9.3–13.9 (MT), 9.3–13.5 (NT) and 7.3–7.7 (CT). In the final year, significant (P < 0.05) tillage effects on SOC stocks were also observed at 15–30 cm. Cumulative SOC stocks (Mg C ha⁻¹) in the 0–60 cm profile were higher (P < 0.05) under MT (32.8–39.9) and NT (32.9–41.6) than CT (27.8–30.9). On average, MT and NT sequestered between 0.55 and 0.78 Mg C ha⁻¹ year⁻¹ at 0–30 cm depth, but a net decline (0.13 Mg C ha⁻¹ year⁻¹) was observed under CT. At 0–30 cm, MT and NT had higher (P < 0.05) MWD (0.19–0.23 mm) and WSA (2.3–3.5%) than CT (MWD: 0.1–0.12 mm, WSA: ≈1.0%). Both MWD and WSA were significantly (P < 0.05) correlated to SOC. Seasonal yields showed significant (P < 0.05) tillage effects, but 6-year mean yields (t ha⁻¹) were similar (CT: 4.49, MT: 4.33, NT: 4.32 for wheat; CT: 3.30, MT: 2.82, NT: 2.83 for cotton). Overall, MT and NT improved soil structural stability and carbon sequestration, while impacts on crop productivity were limited. Therefore, MT and NT are more sustainable tillage systems for the semi-arid regions than conventional tillage. S. Chakanetsa—Deceased.