Synthesis and characterisation of stimuli-responsive poly(N,N′-diethylacrylamide) hydrogels

Stimuli-responsive poly(N,N′-diethylacrylamide) gels were prepared by free radical polymerisation in aqueous solution, using N,N-methylenebisacrylamide as crosslinking agent. The gels were compared with the corresponding poly(N-isopropylacrylamide)-based gels. In particular, the swelling ratio of both gel types including the effect of the crosslinker content, their swelling and deswelling kinetics, their permeability and finally their drug (insulin) storage and controlled release ability were compared. In spite of the similarity in the monomer/crosslinker ratio, the deswelling kinetics and the critical temperatures (ca. 30-32 °C in pure water), some differences could be observed. Compared to poly(N-isopropylacrylamide)-based gels, poly(N,N′-diethylacrylamide)-based gels show a broader phase transition temperature interval, a more pronounced dependency of the swelling ratio on the crosslinker content, slower reswelling kinetics, a higher ingress percentage for dextran standards ranging from 5 to 70 kD, but lower ingress percentages for proteins (BSA, insulin) and much faster drug (insulin) release kinetics. While a non-linear release kinetic was observed in the case of the poly(N-isopropylacraylamide)-based gels both in water and in PBS (phosphate buffered saline), this was not the case for the poly(N,N′-diethylacrylamide)-based gels.     

Poly(N-tert-butyl acrylamide-b-N-acryloylmorpholine) amphiphilic block copolymers via RAFT polymerization: Synthesis, purification and characterization

Amphiphilic block copolymers consisting of two poly(acrylamide) derivative blocks have been synthesized via the reversible addition fragmentation chain transfer (RAFT) polymerization process with a hydrophobic block, poly(N-tert-butyl acrylamide), poly(TBAm), and a non-ionic hydrophilic one, poly(N-acryloylmorpholine), poly(NAM). Both polymerization orders, poly(TBAm-b-NAM) and poly(NAM-b-TBAm), were compared in terms of conversion and control over molecular weights (MW). Purification of the block copolymers was carried out via several methods in order to optimize their subsequent characterization. ¹H NMR analysis resulted in an accurate determination of the second block MW whereas determination of the CMC by the pendant drop method confirmed the ability of the poly(TBAm-b-NAM) block copolymers to self-assemble into micelles in aqueous phase.     

Silica/poly(N,N′-methylenebisacrylamide) composite materials by encapsulation based on a hydrogen-bonding interaction

Monodisperse silica/poly(N,N′-methylenebisacrylamide) core-shell composite materials with silica as core and poly(N,N′-methylenebisacrylamide) (PMBAAm) as shell were prepared by a two-stage reaction, in which the silica core with diameter of 500 nm was synthesized in the first stage according to Stöber method. The PMBAAm shell was then encapsulated over the silica core by distillation-precipitation polymerization of N,N′-methylenebisacrylamide (MBAAm) in neat acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator. The encapsulation of PMBAAm on silica particles was driven by the hydrogen-bonding interaction between the hydroxyl group on the surface of silica core and the amide unit of PMBAAm during the polymerization without modification of the silica surface in the absence of any stabilizer or surfactant. The shell thickness of the core-shell composite particle was controlled via altering the mass ratio of MBAAm monomer to silica core during the polymerization. Hollow PMBAAm microsphere was further developed after removal of silica core with hydrofluoric acid. The resultant core-shell composite and hollow microspheres were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectra (FT-IR) and elemental analysis (EA).     

Large macro-dipoles generated in a supramolecular polymer of N,N′,N″-tris(3,7-dimethyloctyl)benzene-1,3,5-tricarboxamide in n-decane

A supramolecular polymer formed by N,N′,N″-tris(3,7-dimethyloctyl)benzene-1,3,5-tricarboxamide (DO₃B) in n-decane (C₁₀) possesses large macro-dipoles naturally generated by three-fold inter-molecular hydrogen bonding aligned along its helical columnar structure connected by defective portions, which are DO₃B molecules containing failure in the hydrogen bond formation, in the order of head to tail arrangement without dipole inversion like type-A polymers.     

New soluble cyano‐containing poly(arylene ether) copolymers bearing pendant xanthene groups

Homopolymers and copolymers of poly(arylene ether nitrile) (PAEN)‐bearing pendant xanthene groups were prepared by the nucleophilic substitution reaction of 2,6‐difluorobenzonitrile with 9,9‐bis(4‐hydroxyphenyl)xanthene (BHPX) and with various molar proportions of BHPX to hydroquinone (100/0 to 40/60) with N‐methyl‐2‐pyrrolidone (NMP) as a solvent in the presence of anhydrous potassium carbonate. These polymers had inherent viscosities between 0.61 and 1.08 dL/g, and their weight‐average molecular weights and number‐average molecular weights were in the ranges 34,200–40,800 and 17,800–20,200, respectively. All of the PAENs were amorphous and were soluble in dipolar aprotic solvents, including NMP, N,N‐dimethylformamide, and N,N‐dimethylacetamide and even in tetrahydrofuran and chloroform at room temperature. The resulting polymers showed glass‐transition temperatures (T_g's) between 220 and 257°C, and the T_g values of the copolymers were found to increase with increasing BHPX unit content in the polymer. Thermogravimetric studies showed that all of the polymers were stable up to 422°C with 10% weight loss temperatures ranging from 467 to 483°C and char yields of 54–64% at 700°C in nitrogen. All of the new PAENs could be cast into transparent, strong, and flexible films with tensile strengths of 106–123 MPa, elongations at break of 13–17%, and tensile moduli of 3.2–3.7 GPa. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of high molecular weight poly(L‐lactic acid) via melt/solid polycondensation: Intensification of dehydration and oligomerization during melt polycondensation

Melt/solid state polycondensation (MP/SSP) is a cost‐effective route for synthesis of high molecular weight poly(L ‐lactic acid) (PLLA). However, the reaction rates in its four stages need to be enhanced greatly and the reaction times to be shortened largely before the MP/SSP technology can be industrialized. In this study, a new catalyst addition policy, i.e., adding TSA at the dehydration stage and SnCl₂·2H₂O at the MP stage, and more appropriate temperature and pressure programs were presented and applied in the MP process of LLA. The presence of TSA from dehydration appeared very effective for speeding up the dehydration and oligomerization stages as well as depressing racemization in the whole MP process. The polymerization degree (X_n) of oligomer was clearly increased, and the reaction time was shortened to a great extent. Direct using reduced pressure was also very helpful for intensifying the dehydration stage, only leading to LLA loss as little as 2%. A PLLA with M_w of 44,000 and optical purity of 96.8% suitable for subsequent SSP was produced after dehydration for 2 h, oligomerization for 2 h and MP for 4 h under appropriate conditions. And an interesting strong dependence of the M_w of final PLLA product on the X_n of the oligomer was observed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

pH and salt responsive poly(N,N-dimethylaminoethyl methacrylate) cylindrical brushes and their quaternized derivatives

We present the synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) cylindrical brushes, their pH responsiveness, and the corresponding quaternized analog, poly{[2-(methacryloyloxy)ethyl] trimethylammonium iodide} (PMETAI) brushes. PDMAEMA brushes were prepared by atom transfer radical polymerization (ATRP) using the grafting-from strategy. Initiating efficiencies of the ATRP processes were determined by cleaving the side-chains and gel permeation chromatography (GPC) analysis. Due to the slow initiation and steric hindrance, the initiating efficiency is only around 50%. The PDMAEMA brushes show worm-like structures and pH responsiveness, as proven by dynamic light scattering (DLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo-TEM) measurements. Strong cationic polyelectrolyte PMETAI brushes were produced by quaternization of the PDMAEMA brushes. AFM and cryo-TEM images showed similar worm-like morphologies for the PMETAI brushes. The PMETAI brushes collapsed in solution with high concentration of monovalent salt, as proven by DLS and AFM results.     

RAFT synthesis of poly(N‐isopropylacrylamide) and poly(methacrylic acid) homopolymers and block copolymers: Kinetics and characterization

Reversible addition‐fragmentation chain transfer (RAFT) polymerization was used successfully to synthesize temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm), poly(methacrylic acid) (PMAA), and their temperature‐responsive block copolymers. Detailed RAFT polymerization kinetics of the homopolymers was studied. PNIPAAm and PMAA homopolymerization showed living characteristics that include a linear relationship between M _n and conversion, controlled molecular weights, and relatively narrow molecular weight distribution (PDI < 1.3). Furthermore, the homopolymers can be reactivated to produce block copolymers. The RAFT agent, carboxymethyl dithiobenzoate (CMDB), proved to control molecular weight and PDI. As the RAFT agent concentration increases, molecular weight and PDI decreased. However, CMDB showed evidence of having a relatively low chain transfer constant as well as degradation during polymerization. Solution of the block copolymers in phosphate buffered saline displayed temperature reversible characteristics at a lower critical solution temperature (LCST) transition of 31°C. A 5 wt % solution of the block copolymers form thermoreversible gels by a self‐assembly mechanism above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1191–1201, 2006     

One-step synthesis of pegylated cationic nanogels of poly(N,N′-dimethylaminoethyl methacrylate) in aqueous solution via self-stabilizing micelles using an amphiphilic macroRAFT agent

Cationic nanogels of Pegylated poly(N,N′-Dimethylaminoethyl methacrylate) (PEG-PDAEMA) have been synthesized in aqueous solution by a one-step surfactant-free reversible addition-fragmentation transfer (RAFT) process. A Pegylated amphiphilic macroRAFT agent (mPEG₅₅₀-TTC) with a hydrophobic dodecyl chain was utilized to stabilize the micelles and control the polymerization and crosslinking of DMAEMA in aqueous solution. ¹H NMR, GPC, Elemental analysis, Dynamic light scattering (DLS), Zeta potential and Atomic force microscopy (AFM) measurements confirmed the formation of the cationic nanogels in size of about 20 nm with a narrow distribution. It also revealed that the concentration of monomer and the kinds of crosslinker are the key factors to control the formation of nanogel. This cationic nanogel has potential application in gene delivery.     

Water-soluble polyelectrolyte complexes formed by poly(diallyldimethylammonium chloride) and poly(sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate)-graft-poly(N,N-dimethylacrylamide) copolymers

The formation of polyelectrolyte complexes (PECs) between the cationic homopolymer poly(diallyldimethylammonium chloride) (PDADMAC) and the anionic graft copolymers poly(sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate)-graft-poly(N,N-dimethylacrylamide) (P(NaA-co-NaAMPS)-g-PDMAM) was studied in aqueous solution in comparison with the PECs formed between PDADMAC and the graft copolymer backbone poly(sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate). The turbidimetric study of the PECs formed revealed that associative phase separation is prevented when the anionic polyelectrolyte is grafted with the nonionic hydrophilic poly(N,N-dimethylacrylamide) side chains. The PECs are formed through a charge neutralisation process and they adopt a compact structure, as shown by conductivity and viscometry measurements respectively. The water-insoluble PEC core seems to be stabilised by a hydrophilic PDMAM corona, leading to the formation of nanoparticles with a hydrodynamic radius of some decades of nanometers as determined by quasi-elastic light scattering measurements.     

Synthesis of boronate-containing copolymers of N,N-dimethylacrylamide, their interaction with poly(vinyl alcohol) and rheological behaviour of the gels

Cross-linking of polyvinylalcohol (PVA) by boronate-containing copolymer of N,N-dimethylacrylamide (DMAA, 1) was studied and compared to cross-linking of PVA by borate buffers in weakly alkaline solutions. The copolymer of M_w=19,000 g mol⁻¹ containing 9 mol% N-acryloyl-m-aminophenylboronic acid (NAAPBA, 2) was prepared by free radical polymerization of the monomers, exhibiting copolymerization constants r₁=0.84 and r₂=2.2. Due to multipoint interaction of the copolymer with PVA via monodiols, the intermolecular cross-linking required for seven-fold and 10-fold lower boron concentrations as compared to borate buffers of pH 8.6 and 7.5, respectively. In rheological measurements, PVA-copolymer gels exhibited storage moduli (G′_max) comparable to those of PVA-borate gels prepared at 7.5-fold higher boron concentration and the same pH 8.6, what testified to the similar concentration of cross-links in the gels. Therefore, DMAA-NAAPBA copolymer is a more effective cross-linker of PVA than borate. The PVA-copolymer gel exhibited much higher relaxation time (97 s) compared to PVA-borate gels (≤20 s) indicating a longer lifetime of junction zones. The ‘shape stability’ of the gel is suggested to originate in the structure of junctions, containing several boronate-diol complexes, between the macromolecules of PVA and the copolymer.     

Synthesis and characterization of azobenzene-functionalized poly(styrene)-b-poly(vinyl acetate) via the combination of RAFT and “click” chemistry

Here, we described a strategy for preparing well-defined block copolymers, poly(styrene)-b-poly(vinyl acetate) (PS-b-PVAc), containing middle azobenzene moiety via the combination of the reversible addition-fragmentation chain transfer (RAFT) polymerization and “click” chemistry. Firstly, a novel RAFT agent containing α-alkyne and azobenzene chromophore in R group, 2-(3-ethynylphenylazophenoxycarbonyl)prop-2-yl-9H-carbazole-9-carbodithioate (EACDT), was synthesized and used to mediate the RAFT polymerization of styrene (St). Well-defined α-alkyne end-functionalized poly(styrene) (PS) was obtained. Secondly, the RAFT polymerization of vinyl acetate (VAc) was conducted using functionalized RAFT reagent with ω-azide structure in Z group, O-(2-azidoethyl) S-benzyl dithiocarbonate (AEBDC). Well-defined ω-azide end-functionalized poly(vinyl acetate) (PVAc) was obtained. Afterwards, the resulting α-alkyne terminated PS was coupled by “click” chemistry with the azide terminated PVAc. The block copolymer, PS-b-PVAc, was obtained with tailored structures. The products from each step were characterized and confirmed by GPC, ¹H NMR, IR and differential scanning calorimetry (DSC) examination. Kinetics of the trans-cis-trans isomerization from azobenzene chromophore in PS-b-PVAc and PS were investigated in CHCl₃ solutions.     

Synthesis of novel poly(amide‐imide)s containing trimellitylimido‐DL/L‐alanine moieties via direct polycondensation

N‐Trimellitylimido‐DL and L ‐alanine ( 3 ) were prepared from the reaction of trimellitic anhydride ( 1 ) with DL and L ‐alanine ( 2 ) in N,N‐dimethyl formamide (DMF) solution at refluxing temperature. The direct polycondensation reaction of the monomers imide‐diacid ( 3 ) with 4,4′‐diaminodiphenylsulfone ( 4a ), 4,4′‐diaminodiphenylmethane ( 4b ), 1,4‐phenylenediamine ( 4c ), 1,3‐phenylenediamine ( 4d ), 2,4‐diaminotoluene ( 4e ), and 4,4′‐diaminodiphenylether ( 4f ) was carried out in a medium consisting of triphenyl phosphite, N‐methyl‐2‐pyrolidone (NMP), pyridine, and calcium chloride. The resulting poly(amide‐imide)s PAIs, with inherent viscosities 0.32–0.66 dL/g, were obtained in high yield. All of the above‐mentioned compounds were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these new optically active PAI s are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1312–1318, 2001     

Upper critical solution temperature—type cononsolvency of poly(N,N-dimethylacrylamide) in water—organic solvent mixtures

The behaviour of linear poly(N,N-dimethylacrylamide) (PDMAM) chains was studied by turbidimetry and viscometry in mixtures of water with the polar organic solvents methanol, dioxane and acetone. The swelling-deswelling behaviour of PDMAM gels in the same solvent mixtures was also investigated. Contrary to the behaviour in water-methanol mixtures, in water-dioxane and water-acetone mixtures a significant shrinkage of polymer chains and deswelling of polymer gels, followed by phase separation, was observed for high organic solvent fractions. Cononsolvency phenomena were found to be temperature-dependent, as demixing occurred upon decreasing temperature. This upper critical solution temperature (UCST) phase separation behaviour in mixed solvents was studied by turbidimetry and compared to the well-known lower critical solution temperature (LCST) behaviour of poly(N-isopropylacrylamide) (PNIPAM) in similar solvents mixtures.     

Thermo- and pH-sensitive dendrimer derivatives with a shell of poly(N,N-dimethylaminoethyl methacrylate) and study of their controlled drug release behavior

Novel dendrimer derivatives combining the temperature- and pH-sensitivities are synthesized. At first, polyamidoamine (PAMAM) dendrimers with generations 1-5 are synthesized by the reaction of ethylenediamine with methyl acrylate, and then the dendrimers are acylated by chloroacetyl chloride to obtain PAMAM-Cl, which can act as a macroinitiator for further synthesizing functional dendrimers. For fulfilling this goal, the polymers consisting of a dendritic PAMAM core and poly(N,N-dimethylaminoethyl methacrylate) (PDMA) shell are synthesized by atom transfer radical polymerization (ATRP). Their macromolecular structures are characterized by FTIR, ¹H NMR, DSC and particle size analyses, and their aqueous solutions are inspected by UV spectroscopy for understanding their thermo- and pH-sensitivities. The results show that novel dendrimer derivatives exhibit clearly thermo- and pH-respondings in accordance with the change of the environment. Using chlorambucil (CLB) as a model drug, the behaviors of the controlled drug release from polymers with different average graft length of PDMA are studied. The results indicate that the rate of the drug release can be effectively controlled by the pH value.     

Synthesis,characterization, and optoelectronic properties of two new polyfluorenes/poly(p‐phenylenevinylene)s copolymers

Two novel copolymers of polyfluorenes/poly(p‐phenylenevinylene)s copolymers with p‐tert‐butyl‐phenylenemethylene groups in the C‐9 position of alternating fluorene unit, poly[1,4‐(2,5‐dibutyloxyl)‐phenyleneviny lene‐alt‐9‐(p‐tert‐butyl‐phenylenemethylene)fluorene] and poly[1,4‐(2,5‐dioctyloxyl)‐phenylenevinylene‐alt‐9‐(p‐tert‐butyl‐phenylenemethylene)fluorine], have been synthesized via the Heck polycondensation reaction. The synthesized polymers were characterized by FTIR, NMR, DSC, TGA, UV–vis, and PL spectra. The polymers showed high glass transition temperatures and good thermal stability. A polymer light‐emitting diode with the configuration ITO/PEDOT:PSS/P2/Ca/Al has been fabricated. The device emitted a yellow light with a peak wavelength of 578 nm similar to the PL spectra of the copolymer film. A maximal luminance of 534 cd/m² was obtained at a driving voltage of 24.5 V. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3955–3962, 2006     

Redox and catalytic properties of new polypyrrole modified electrodes functionalized by [Ru(bpea)(bpy)H2O] complexes; bpea=N,N′-bis(2-pyridylmethyl)ethylamine, bpy=2,2′-bipyridine

New ruthenium(II) complexes containing one or two pyrrole-functionalized polypyridylic ligands have been prepared in order to study their electrochemical behaviour in heterogeneous phase, after anodic polymerization from CH₂Cl₂ solution on an electrode surface. Complexes containing one pyrrole unit have general formula [Ru(bpea-pyr)(bpy)(L)]²⁺ (bpea-pyr=N-[3-bis(2-pyridylmethyl)aminopropyl]pyrrole, bpy=2,2′-bipyridine, L=Cl, complex 3, or L=H₂O, complex 1), whereas compounds having two pyrrole units correspond to [Ru(bpea-pyr)(bpy-pyr)(L)]²⁺ (bpy-pyr=4-methyl-4′-pyrrolylbutyl-2,2′-bipyridine, L=Cl, complex 4, or L=H₂O, complex 2). Upon oxidative polymerization, all complexes form highly stable polypyrrolic films on a graphite disk electrode surface. An electrode modified with complex 2 polypyrrole coating film, C/poly-2, has been tested as heterogeneous catalyst for the oxidation of benzyl alcohol, showing a remarkably high efficiency and notably improving the results obtained with analogous complexes in homogeneous phase.