Clickable poly(ionic liquid)s for modification of glass and silicon surfaces

Covalent attachment of poly(ionic liquid)s (PILs) by click chemistry on glass or silicon (Si) surfaces was performed. Poly[1-(4-vinylbenzyl)-3-butylimidazolium bis(trifluoromethylsulfonyl)imide] (polyVBBI⁺Tf₂N⁻), and copolymers of polyVBBI⁺Tf₂N⁻ with fluorescein O-methacrylate were synthesized by conducting an atom transfer radical polymerization (ATRP) from initiators containing azide or thioacetate groups. The azide- and thiol-terminated PILs were then successfully grafted onto alkyne and alkene modified glass/Si wafers by thermal azide–alkyne cycloaddition and photoinitiated thiol-ene click reactions, respectively. The modified surfaces were characterized by contact angle measurements and ellipsometry. The fluorescent PIL functionalized surfaces showed strong fluorescence under UV irradiation. This procedure of tethering PILs to substrates also provides an easy way to change the surface hydrophilicity by replacing the anions in the grafted PILs. The present approach could be readily applied for surface modifications with other types of PILs or their copolymers to achieve different functionalities on various surfaces.     

Simple route to prepare stable liquid marbles using poly(ionic liquid)s

Individual “liquid marbles” were prepared by encapsulation of water droplets using flocculated polymer latexes stabilized with poly(ionic liquid)s. At first, the emulsion polymerization of poly(styrene) and poly(methyl methacrylate) using different poly(ionic liquid)s as stabilizers was investigated. Stable latexes composed of spherical polymer particles with sizes ranging between 300 and 700 nm as characterized by dynamic light scattering and scanning electron microscopy were obtained. Subsequently, the polymer particles were flocculated by anion exchange precipitation of the poly(ionic liquid)s provoked by the addition of lithium bis(trifluoromethanesulfonyl)imide salt. After simple filtration and drying processes, the flocculated latexes led to hydrophobic powders with similar micrograin size compared to the original latexes. Very stable “liquid marbles” were prepared by gently shaking water droplets of different volumes onto the hydrophobic powders. The morphology and stability of the liquid marbles were characterized by optical and confocal microscopy.     

Low-pressure CO2 sorption in ammonium-based poly(ionic liquid)s

Ammonium-based ionic liquid monomers and their corresponding polymers [poly(ionic liquid)s] are synthesized and characterized for CO₂ sorption. The polymers have much higher CO₂ sorption capacities than the room-temperature ionic liquids and imidazolium-based poly(ionic liquid)s. For example, P[VBTMA][PF₆] with polystyrene backbone has a CO₂ sorption capacity of 10.67 mol%. The CO₂ sorption is selective over N₂ and O₂. The effects of cation, backbone, substituent, anion and crosslinking on CO₂ sorption are discussed. The sorption mechanism study indicates that CO₂ sorption by the poly(ionic liquid)s is a bulk and surface phenomenon.     

Poly(ionic liquid)s: Polymers expanding classical property profiles

In recent years, polymeric/polymerized ionic liquids or poly(ionic liquid)s (PILs) were found to take an enabling role in some fields of polymer chemistry and material science. PILs combine the unique properties of ionic liquids with the flexibility and properties of macromolecular architectures and provide novel properties and functions that are of huge potential in a multitude of applications, including solid ionic conductor, powerful dispersant and stabilizer, absorbent, precursor for carbon materials, porous polymers, etc. So far, the preparation of PILs with various forms in cations and anions has mostly focused on the conventional free radical polymerization of IL monomers. Recent progress in the preparation of PILs via controlled/“living” radical polymerizations points out an unprecedented opportunity to precisely design and control macromolecular architecture of IL species on a meso-/nanoscale within a polymer matrix. There are also newly emerging polymerization techniques that have appeared for the preparation of PILs which have further pushed the limit of the design of PILs. In this review, we try to summarize the current preparative strategies of PILs, providing a systematic and actual view on the polymer chemistry behind. A discussion of the properties and applications of PILs constitutes the second part of this review.     

Post-polymerization modification and organocatalysis using reactive statistical poly(ionic liquid)-based copolymers

Copoly(ionic liquid)s (coPILs) based on poly(styrene)-co-poly(4-vinylbenzylbutylimidazolium) with different anions (Cl⁻ and HCO₃⁻), denoted as PS-co-PVBnBuImCl 1 and PS-co-PVBnBuImHCO₃2, were used as reactive polymers for the purpose of post-polymerization modification and organic catalysis. While coPIL 1 could be derived into the corresponding poly(N-heterocyclic carbene)-silver transition metal complex referred to as poly(NHC–Ag) by a simple deprotonation/metallation sequence utilizing Ag₂O, coPIL 2 was found to quantitatively react with various electrophiles, including CS₂, isothiocyanate and transition metals (based on Pd and Au) upon formal loss of “H₂CO₃, affording the post-functionalized poly(NHC-CS₂), poly(NHC-isothiocyanate) and poly(NHC-Met) (Met = Au, Pd) copolymers. The catalytic activity of both coPILs 1 and 2 was also examined in cyclic carbonate formation by reaction between CO₂ and propylene oxide and in the benzoin condensation, respectively.     

Synthesis of novel nanoreinforcements for polymer matrices by ATRP: Triblock poly(rotaxan)s based in polyethyleneglycol end-caped with poly(methyl methacrylate)

Poly(rotaxan)s of poly(ethylene glycol) and α-cyclodextrines (CD) block copolymers end-capped with poly(methyl methacrylate) chains were synthesized by atom transfer radical polymerization. The synthesized copolymers were characterized by ¹H NMR, 2D NOESY NMR, X-ray and Thermogravimetric analysis. Assuming a maximum relation of 2 CDs per ethyleneglycol unit, a coverage degree of 18% and 15% was achieved. X-ray analysis showed a characteristic signal around 20θ for all copolymers with an amorphous halo mainly due to inter-crystal poly(ethylene glycol) and poly(methyl methacrylate) chains. Full Molecular Dynamics of 20 ns was used to simulate the crystal structure of these copolymers. A pair correlation function was used to determine the coupling between hydrogen atoms of PEG, PMMA and cyclodextrine obtained by 2D NOESY NMR.     

Installation of a reactive site for covalent wiring onto an intrinsically conductive poly(ionic liquid)

Post-polymerization radical bromination of a nanostructured poly(ionic liquid) that selectively introduces a reactive bromo-group onto the polyalkylthiophene backbone is described. Raman and FT-IR spectroscopy proves that the bromine is successfully introduced at the 3-methyl position of the thiophene and that the molecular structure of the polymer remains largely intact with only minimal chain scission detected. FT-IR and Vis-NIR spectroscopy indicates that incorporation of the bromine induces twisting (loss of co-planarity) of the polythiophene backbone. WAXS confirms retention of an ordered lamellar structure with minor lattice spacing contraction. Cyclic voltammetry confirms spectroscopic findings that the bromination reaction yields a stable p-doped polymer. The installed bromine is susceptible to nucleophilic displacement permitting the covalent attachment of other functional molecules, such as a dialkylphosphonate. Elemental analysis of such a transformation established that 100% functionalization can be achieved. These results collectively demonstrate that post-modification of a π-conjugated polymer can be used to both tune electronic and photonic properties, as well as install a chemoselective attachment point for the covalent wiring of other molecules.     

Clickable,versatile poly(2,5-dithienylpyrrole) derivatives

In this study a novel, clickable, azide containing conducting polymers based on 1-(2-azido-ethyl)-2,5-dithiophene-2-yl-1H-pyrrole (SNS-N₃) were synthesized and characterized. Optical and electronic properties of homopolymer (PSNS-N₃) were investigated and colorimetric studies were performed. The homopolymer has a band gap of 2.49 eV and it displays yellow to blue coloration upon doping. Electrochemically prepared copolymers of SNS-N₃ and 3,4-ethylenedioxythiophene (EDOT) formed multichromic, color tunable electrochromic materials with continuous color gradient from cinnamon, mustard, lime green, blue and dark blue. Spectroelectrochemical analyses revealed that the neutral copolymers possess two absorption maxima (～320 and 450 nm) where the relative intensity and position of the two depends on polymerization potential. Copolymer films could be fully switched between their neutral and oxidized forms in ～1.2 s with a percent transmittance of ～65% at 950 nm. Moreover, a PSNS-N₃ coated ITO electrode was subjected to click reaction using ethynylferrocene. CV and FTIR studies revealed that ferrocene could easily be attached onto the electrode surface without loss of electroactivity of both ferrocene and PSNS backbone. Our results suggest that electrochemically prepared PSNS-N₃ films offer a novel and multipurpose platform for simple, effective post-functionalization of poly(2,5-dithienylpyrrole)s under mild conditions.     

Fluorinated poly(meth)acrylate: Synthesis and properties

Due to good reactivity of fluorinated (meth)acrylates with other monomers or polymer segments, fluorinated poly(meth)acrylates possess more economical and convenient synthesis routes than other fluoropolymers. This feature article initially summarizes different types of fluorinated (meth)acrylates, which can be divided into fluorinated alkyl (meth)acrylates and fluorinated aryl (meth)acrylates. Subsequently, various approaches for synthesizing fluorinated poly(meth)acrylates including random, block, graft or star copolymers are described. Conventional free radical polymerization can be used in synthesizing random copolymers, while controlled/“living” radical polymerization can provide well-defined copolymers with accurate control over molecular weight and special structures as expected. In particular, introduction of fluorinated components into as-prepared copolymers offers an alternative route to synthesize fluorinated poly(meth)acrylates which are difficult to be obtained directly via polymerization. The incorporation of fluorine can confer unique and highly desirable properties to poly(meth)acrylates such as low surface energy, thermal stability, chemical and weather resistance, low refractive index, and self-organization characteristics. Such properties are described in great details based on many recent articles.     

Poly(ionic liquid) nanoparticles as novel colloidal template for silica nanocasting

Spherical poly(ionic liquid) (PIL) nanoparticles of different size (25–70 nm) were synthesized and applied as a novel colloidal soft template for the preparation of meso- and macroporous inorganics, here exemplified with silica and its metal nanoparticle doping via nanocasting. Pore size and pore architecture can be adjusted by appropriate choice of the template and the reaction conditions. Unexpectedly, it was found that the in situ generated methanol plays a very important role during the casting process. It enlarged the overall surface area by introducing a significant fraction of micropores and small mesopores. The largest specific surface area was obtained at an optimized ratio of tetramethyl orthosilicate (TMOS) to PIL nanoparticle. In addition, PIL nanoparticles pre-functionalized with Pt metal nanoparticles were used in the same manner as hybrid templates for nanocasting. The pyrolysis conditions were optimized to synthesize mesoporous silica functionalized with uniformly distributed metal nanoparticles of very small size in a one-pot process.     

Surface-initiated nitroxide-mediated radical polymerization of 2-(dimethylamino)ethyl acrylate on polymeric microspheres

2-(Dimethylamino)ethyl acrylate (DMAEA) was grafted from the surface of alkoxyamine-functionalized crosslinked poly(styrene-co-chloromethylstyrene) microspheres by nitroxide-mediated radical polymerization (NMRP). Latex particles (∼60 nm diameter) bearing chloromethyl groups were synthesized by emulsion polymerization. N-tert-butyl-N-(1-diethyl phosphono-2,2-dimethylpropyl)nitroxide (SG1) was then immobilized on the particle surface. Microspheres grafted with the homopolymer pDMAEA, as well as block copolymers poly(styrene-b-DMAEA) and poly(butyl acrylate-b-DMAEA) were prepared by surface-initiated NMRP in N,N-dimethylformamide at 112 °C, with the addition of free SG1 to ensure that control is maintained. Particle size increases with number average molecular weight (M_n) of untethered polymers. The polymerizations exhibit linear first order kinetic plots and slight curvature of evolution of M_n with conversion. The functional microspheres were analyzed by infrared spectroscopy, transmission electron microscopy and thermal analysis, as well as their dispersibility in water; the results support the formation of surface-grafted pDMAEA on the microspheres.     

Polyurethane-based poly (ionic liquid)s for CO2 removal from natural gas

Carbon dioxide separation from CH₄ is important to the environment and natural gas processing. Poly (ionic liquid)s (PILs) based on polyurethane structures are considered as potential materials for CO₂ capture. Thus, a series of anionic PILs based on polyurethane were synthesized. The effects of polyol chemical structure and counter-cations (imidazolium, phosphonium, ammonium, and pyridinium) in CO₂ sorption capacity and CO₂/CH₄ separation performance were evaluated. The synthesized PILs were characterized by NMR, DSC, TGA, dinamical mechanical thermo analysis (DMTA), SEM, and AFM. CO₂ sorption, reusability, and CO₂/CH₄ selectivity were assessed by the pressure-decay technique. The counter-cation and polyol chemical structure play an important role in CO₂ sorption and CO₂/CH₄ selectivity. PILs exhibited competitive thermal mechanical properties. Results showed that PILPC-TBP was the best poly (ionic liquid) for CO₂/CH₄ separation. Moreover, poly (liquid ionic) base polyol (polycarbonate) with phosphonium (PILPC-TBP) demonstrated higher CO₂ sorption capacity (21.4 mgCO₂/g at 303.15 K and 0.08 MPa) as compared to other reported poly (ionic liquids). © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47536.     

Expanding the chemistry of single‐ion conducting poly(ionic liquid)s with polyhedral boron anions

The synthesis of a new family of single‐ion conducting random copolymers bearing polyhedral boron anions is reported. For this purpose two novel ionic monomers, namely [B₁₂H₁₁(OCH₂CH₂)₂OC(?O)C(CH₃)?CH₂]^2?[(C₄H₉)₄N⁺]₂ and [8‐(OCH₂CH₂)₂OC(?O)C(CH₃)?CH₂‐3,3′‐Co(1,2‐C₂B₉H₁₀)(1′,2′‐C₂B₉H₁₁)]^?K⁺, having methacrylate function, diethylene glycol bridge and closo‐dodecaborate or cobalt bis(1,2‐dicarbollide) anions were designed. Such monomers differ from previously reported ones by (i) chemically attached highly delocalized boron anions, by (ii) valency of the anion (divalent anion and monovalent one) and by (iii) the presence of oxyethylene flexible spacer between the methacrylate group and bonded anion. Their free radical copolymerization with poly(ethylene glycol) methyl ether methacrylate and subsequent ion exchange provided lithium‐ion conducting polyelectrolytes showing low glass transition temperature (?53 to ?49 °C), ionic conductivity up to 9.1 × 10^?7 S cm^?1, lithium transference number up to 0.61 (70 °C) and electrochemical stability up to 4.1 V versus Li⁺/Li (70 °C). The incorporation of propylene carbonate (20–40 wt%) into the copolymers resulted in the enhancement of their ionic conductivity by one order of magnitude and significantly increased their electrochemical stability up to 4.7 V versus Li⁺/Li (70 °C). © 2019 Society of Chemical Industry     

Synthesis of densely grafted copolymers by nitroxide-mediated radical polymerization of styrene using poly(phenylacetylene)s as a macroinitiator

Poly(phenylacetylene)s carrying alkoxyamine moieties in the side chain were prepared by Rh-catalyzed homopolymerization of 1-(4-ethynylphenyl)-1-(2,2,6,6-tetramethyl-1-piperidinyloxyl)ethane (1) and random copolymerization of 1 and 4-methoxy-1-ethynylbenzene (2a) or 4-decyloxy-1-ethynylbenzene (2b). ¹H NMR spectra showed that the poly(phenylacetylene)s adopted a cis-transoid structure. Using the poly(phenylacetylene)s as the macroinitiator the nitroxide-mediated radical polymerization of styrene (St) was carried out at 120 °C to yield densely grafted copolymers as a light yellow powder. The side chain lengths of the graft copolymers were determined by both ¹H NMR and conversion of St, which agreed with each other. The SEC profiles of the graft copolymers were unimodal at low conversions but were not unimodal at high conversion: a shoulder was observed in the high molecular=weight region and a small peak was observed in the low molecular=weight region. ¹H NMR measurements of the graft copolymers indicated that the copolymers adopted a trans-transoid structure, revealing that isomerization from cis-transoid to trans-transoid forms took place during the polymerization of St at 120 °C.     

Ionic liquid/poly(ionic liquid)‐based electrolytes for energy devices

Ionic liquids are organic salts with melting points generally below 100 °C. They are attracting wide attention and are used as electrolytes in electrochemical devices, such as fuel cells, lithium‐ion batteries, dye‐sensitized solar cells, supercapacitors and light‐emitting electrochemical cells, due to their negligible vapor pressure, high ionic conductivity and wide electrochemical window. This perspective article highlights the applications of ionic liquid‐ or poly(ionic liquid)‐based electrolytes in fuel cells, dye‐sensitized solar cells and supercapacitors. © 2013 Society of Chemical Industry     

Synthesis and characterization of thermotropic liquid crystalline poly(azomethine ether)s

Two series of monomers, namely 4,4′-diformyl-α,ω-diphenoxydecane and 4,4′-diformyl-3,3-methoxy-α,ω-diphenoxydecane, were prepared from 1,10-dibromodecane with p-hydroxybenzaldehyde and 4-hydroxy-3-methoxybenzaldehyde (vanillin), respectively. The poly(azomethine ether)s were prepared by solution polycondensation using 4,4′-diformyl-α,ω-diphenoxydecane, 4,4′-diformyl-3,3-methoxy-α,ω-diphenoxydecane with various diamines. The monomers and polymers were characterized by intrinsic viscosity, FT-IR, ¹H, and ¹³C NMR spectroscopy. The thermogravimetric analysis reveals that the polymers are stable up to 320-500 °C and decomposed with good char yield. The thermotropic liquid crystalline properties of the polymers were examined by differential scanning calorimetry (DSC) and their textures observed under hot stage optical polarized microscopy (HOPM). All the polymers were exhibited thermotropic liquid crystalline properties except tetramethylene diamines-based polymers.     

Electropolymerization of poly(3-methylthiophene) in pyrrolidinium-based ionic liquids for hybrid supercapacitors

The ionic liquids (ILs) N-butyl-N-methyl-pyrrolidinium trifluoromethanesulfonate (PYR₁₄Tf) and N-methyl-N-propyl-pyrrolidinium bis(fluorosulfonyl)imide (PYR₁₃FSI) are investigated as electropolymerization media for poly(3-methylthiophene) (pMeT) in view of their use in carbon/IL/pMeT hybrid supercapacitors. Data on the viscosity, solvent polarity, conductivity and electrochemical stability of PYR₁₄Tf and PYR₁₃FSI as well as the effect of their properties on the electropolymerization and electrochemical performance of pMeT, which features >200 Fg⁻¹ at 60 °C when prepared and tested in such ILs, are reported and discussed; the results of the electrochemical characterization in N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide of the so-obtained pMeT are also given, for comparison.     

A redox poly(ionic liquid) hydrogel: Facile method of synthesis and electrochemical sensing

In this article, a redox-responsive poly(ionic liquid) (redox-PIL) hydrogel Poly(1-vinyl-3-propionate imidazole phenothiazine sulfonic acid)-chitosan [Poly(VPI⁺PTZ-(CH₂)₃SO₃⁻)-CS] was produced by using chitosan (CS) crosslinking with redox-PIL Poly(1-vinyl-3-propionate imidazole phenothiazine sulfonic acid [Poly(VPI⁺PTZ-(CH₂)₃SO₃⁻)]. The incorporation of redox-active counter anions 3-(phenothiazine-10-yl) propane 1-sulfonic acid anions (PTZ-(CH₂)₃SO₃⁻) into cationic PIL-polyimidazole rendered Poly(VPI⁺PTZ-(CH₂)₃SO₃⁻) with electron catalytic ability, ionic conductivity, and electron conductivity. Poly(VPI⁺PTZ-(CH₂)₃SO₃⁻)-CS combines the properties of hydrogel and redox-PIL, thus offering intrinsic porous conducting frameworks and promoting the transport of charges, ions, and molecules, leading hydrogel with excellent electrochemical properties. The crosslinking occurrence of Poly(VPI⁺PTZ-(CH₂)₃SO₃⁻) and CS resulting from the synthetic process of hydrogel was verified by differential scanning calorimetry and thermogravimetric analysis. A three-dimensional polymer network hydrogel with good biocompatibility and permeability was formed after crosslinking. In addition, only 64% weight loss within 600 °C was observed in Poly(VPI⁺PTZ-(CH₂)₃SO₃⁻)-CS representing its thermally stable performance. When used as an electrochemical sensor, the hydrogel-modified gold electrode improved the electrocatalytic oxidation of cysteine. Differential pulse voltammetry results indicated that the detection range was from 5 × 10⁻⁸ to 5 × 10⁻³ M and the limit of detection was 6.64 × 10⁻⁸ M. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48051.     

离子液体修饰磺化聚醚醚酮作为离子交换膜

通过NaBH₄还原磺化聚醚醚酮(SPEEK)得到羟基功能化的SPEEK后,采用酯化反应将离子液体1-羧甲基-3-甲基咪唑氯盐接枝到磺化聚醚醚酮上得到接枝聚合物。实验结果表明：离子液体修饰后的磺化聚醚醚酮离子交换膜吸水率和溶胀度降低,而导电率得到了显著提高。     

(Meth)acrylate liquid crystalline polymers for membrane applications

Synthesis and characterization of a series of linear copolymers with liquid crystalline side chains is reported. Methacrylate monomers containing cyanobiphenyl as a mesogenic group were prepared. These monomers were then copolymerized with 2‐ethylhexyl acrylate in varying molar ratios. The structure and composition of the monomers and corresponding polymers were determined by ¹H‐NMR, elemental analysis and size‐exclusion chromatography. Thermal properties of the polymers were studied using differential scanning calorimetry, polarized optical microscopy, and X‐ray scattering techniques. Increasing mesogen content resulted in an increase of the glass transition temperature of the copolymers. In addition, above a threshold mesogen content the copolymers exhibited smectic mesophases. Using a solution casting technique, a membrane was fabricated to study single gas transport behaviors. Permeabilities, were in the order of CO₂ > propylene > O₂ > N₂ > CH₄ > propane. Diffusion coefficients correlated well to Lenard–Jones Diameter. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42694.