柔性可拉伸硅橡胶@多壁碳纳米管/硅橡胶可穿戴应变传感纤维

基于核-壳结构设计,采用简便、低成本的浸涂-固化法制得柔性、可拉伸、高灵敏且稳定的聚二甲基硅氧烷硅橡胶@多壁碳纳米管/聚二甲基硅氧烷硅橡胶(PDMS@MWCNTs/PDMS)压阻式应变传感纤维。通过FTIR、XRD、TG、TEM对硅烷偶联剂改性多壁碳纳米管(MWCNTs-KH570)的化学结构、热稳定性和微观形貌进行了分析,深入研究了核-壳结构与MWCNTs-KH570质量分数对PDMS@MWCNTs/PDMS复合纤维导电性能、传感性能及力学性能的影响规律与机制。结果表明:羟基化MWCNTs(MWCNTs—OH)表面接枝KH570使其在壳层PDMS基体中具有良好的分散性和界面相互作用;核-壳结构的设计使PDMS@MWCNTs/PDMS复合纤维在低填充下具有高电导率和传感性能;PDMS@MWCNTs/PDMS复合纤维的导电性能与传感性能随着MWCNTs-KH570质量分数增加而提高,且在人体关节运动监测中表现出良好的可重复性和工作稳定性。      

聚乳酸/石墨/多壁碳纳米管复合材料的制备及性能

通过共溶剂法制备了由石墨(GN)和多壁碳纳米管(MWCNTs)掺杂的聚乳酸(PLA)纳米复合材料,借助扫描电镜等手段,研究了MWCNTs用量对复合材料微观结构、热稳定性、导热和导热性能及介电性能的影响。结果显示,MWC-NTs和GN在PLA基体中形成了稳定的导电和导热网络结构,从而导致复合材料具有较低的导电和导热逾渗阈值,其值约为MWCNTs/GN=0.5/1。MWCNTs和GN均匀分散和协同增强效应促使复合材料热稳定性、导热和导电性能明显提高。与纯PLA相比,填料在逾渗阈值附近的复合材料的初始分解温度提高了近16℃,导热系数提高了1倍,体积电阻降低了109数量级。     

Thermal conductivities of alumina-based multiwall carbon nanotube ceramic composites

Composites incorporating various vol.% (0.0, 1.1, 6.4, and 10.4) of multiwall carbon nanotubes (MWCNTs) in alumina were consolidated by the spark plasma sintering. Their thermal transport properties were investigated over the temperature range 300–800 K as a function of nanotube contents. It was observed that the temperature-dependent effective thermal conductivity decreases with the addition of MWCNTs in alumina. This behavior was analyzed in terms of phonon mean free path, elastic modulus, average sound speed, and interface thermal resistance. Compared with 1/T behavior for pristine alumina, a subtle decrease in temperature dependence of the thermal conductivity of the composites with the addition of MWCNTs is observed, indicating the presence of extra phonon scattering mechanism beyond the intrinsic phonon–phonon scattering. Simulation of experimental results with theoretical model shows that the large interfacial thermal barrier between MWCNTs and alumina plays a dominant role in controlling thermal transport properties of the composites. In addition to dominant interface thermal resistance other secondary factors such as nanotube agglomeration, processing defects, porosity also contribute for low thermal conductivity at the higher volume fraction of MWCNTs in the composite.     

The pH sensing characteristics of the extended-gate field-effect transistors of multi-walled carbon-nanotube thin film using low-temperature ultrasonic spray method

A novel, simple and low-temperature ultrasonic spray method was developed to fabricate the multi-walled carbon-nanotubes (MWCNTs) based extended-gate field-effect transistors (EGFETs) as the pH sensor. With an acid-treated process, the chemically functionalized two-dimensional MWCNT network could provide plenty of functional groups which exhibit hydrophilic property and serve as hydrogen sensing sites. For the first time, the EGFET using a MWCNT structure could achieve a wide sensing rage from pH = 1 to pH = 13. Furthermore, the pH sensitivity and linearity values of the CNT pH-EGFET devices were enhanced to 51.74 mV/pH and 0.9948 from pH = 1 to pH = 13 while the sprayed deposition reached 50 times. The sensing properties of hydrogen and hydroxyl ions show significantly dependent on the sprayed deposition times, morphologies, crystalline and chemical bonding of acid-treated MWCNT. These results demonstrate that the MWCNT-EGFETs are very promising for the applications in the pH and biomedical sensors.     

Multiwall carbon-nanotube-doped ion conducting polymer electrolyte for electrochemical application

Electrical, structural and optical properties of a composite containing a polymer electrolyte (namely polyethylene oxide complexed with sodium iodide) and multiwall carbon nanotube (MWCNT) are reported. The films of these composites were ‘solution casted’ using the viscous solution of polyethylene oxide (PEO) complexed with sodium iodide (NaI) in desired ratios and characterised using various techniques. The conductivity versus composition plot in PEO:NaI shows conductivity maxima at 12?wt% NaI concentration while in MWCNTs doped polymer electrolyte it occurs at 40?wt% MWCNTs concentration. The surface morphology by scanning electron microscopy (SEM) shows the enhancement in amorphous reason by MWCNTs doping which is a well-known favourable condition for conductivity enhancement. The differential scanning calorimetry shows that dispersal of MWCNTs reduces the crystallinity of polymer electrolyte that is well-supported by our polarised optical micrographs and SEM measurements.     

Effect of MWCNTs/ZnO inorganic fillers on the electrical,mechanical and thermal properties of SiR-based composites

Rubber insulation materials were widely used in the fields of electrical and electronic engineering, especially, which have excellent nonlinear electrical conductivity and can be employed to homogenize the electric field distribution of cable accessories. To enable the rubber materials, such as silicon rubber (SiR), to possess excellent nonlinear electrical conductivity has been a hot issue. In this paper, MWCNTs/ZnO inorganic fillers were prepared by mixing a small amount of multi-wall carbon nanotubes (MWCNTs) with zinc oxide (ZnO) nanosheets, and MWCNTs/ZnO/SiR composites were prepared. The macroscopical properties results show that the nonlinear electrical conductivity characteristics can be induced by filling appropriate content of MWCNTs/ZnO fillers, and the threshold field strength corresponding to the nonlinear conductivity gradually decreases with the increase of MWCNTs filling content, which further decreases with the increase of measured temperature. The COMSOL simulation results also verify that MWCNTs/ZnO/SiR composite with nonlinear conductivity can effectively reduce the electric field strength at the stress cone of cable accessories. In addition, the thermal conductivity and tensile strength for MWCNTs/ZnO/SiR composite are also improved comparing to pristine SiR. This work demonstrates MWCNTs/ZnO/SiR composites possess outstanding overall properties and have good potential to be used in the cable accessory.

     

Rheology and thermal conductivity of calcium grease containing multi-walled carbon nanotube

Recently, nanofluids attract considerable interest for enhanced rheological behavior and thermal performance. The aim of this research is to study the influence of additives Multi-Walled Carbon Nanotubes (MWCNTs) on the rheological behavior and its structure, thermal conductivity, and the influence of shear thinning rate on oil separation at different temperatures for calcium grease. Various concentrations of MWCNTs (0.5, 1, 2, 3, and 4%) have been added to the grease to obtain the best percentages that improve the properties of nanofluid. The microstructure of MWCNTs and nanofluid were examined by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), and Scanning Electron Microscope (SEM). These experimental investigations were evaluated with a Brookfield programmable Rheometer DV-III ULTRA. The results indicated that the optimum concentration of MWCNTs was 3%, and the dropping point increasing about 11%. The rheological behaviors of the nanofluids show that the grease with various concentrations of MWCNTs demonstrates non Newtonian behaviors and the results indicated that the shear stress, apparent viscosity and thermal conductivity increase with the increase of volume concentration of MWCNTs to 65%, 52%, and% 56, respectively.     

Electrical conductivity enhancement of polymer/multiwalled carbon nanotube (MWCNT) composites by thermally-induced defunctionalization of MWCNTs

We report a thermally-induced increase of electrical conductivity of polymer/multiwalled carbon nanotube (MWCNT) composites using Diels-Alder-adduct-modified MWCNTs as additives. Thermal treatments of the composites induce the defunctionalization of the modified MWCNTs through retro-DA reaction, consequently to recover the electrical conductivity of MWCNTs and to increase the conductivity of PVDF/MWCNT composites. For the composites possessing 0.5 wt % of MWCNTs, thermal treatment increases the electrical conductivity from 2 × 10(-12) S cm(-1) to 4 × 10(-8) S cm(-1) and significantly reduces the value of percolation threshold. Meanwhile, the thermal treatment does not alter the mechanical properties of the composites.     

Dispersion of multi-walled carbon nanotubes in biodegradable poly(butylene succinate) matrix

This communication describes the preparation, characterization and properties of biodegradable poly(butylene succinate) (PBS)/multi-walled carbon nanotubes (MWCNTs) nanocomposite. Nanocomposite was prepared by melt-blending in a batch mixer and the amount of MWCNTs loading was 3 wt%. State of dispersion-distribution of the MWCNTs in the PBS matrix was examined by scanning and transmission electron microscopic observations that revealed homogeneous distribution of stacked MWCNTs in PBS matrix. The investigation of the thermomechanical behavior was performed by dynamic mechanical thermal analysis. Results demonstrated substantial enhancement in the mechanical properties of PBS, for example, at room temperature, storage flexural modulus increased from 0.64 GPa for pure PBS to 1.2 GPa for the nanocomposite, an increase of about 88% in the value of the elastic modulus. The tensile modulus and thermal stability of PBS were moderately improved after nanocomposite preparation with 3 wt% of MWCNTs, while electrical conductivity of neat PBS dramatically increased after nanocomposite formation. For example, the in plane conductivity increased from 5.8 x 10(-9) S/cm for neat PBS to 4.4 x 10(-3) for nanocomposite, an increase of 10(6) fold in value of the electrical conductivity.     

Microwave-assisted synthesis of ZnO/MWCNT hybrid nanocomposites and their alcohol-sensing properties

Zinc oxide and multi-walled carbon nanotube (ZnO/MWCNT) hybrid nanocomposites were synthesised by microwave-assisted method using the mixed solution of zinc acetate dehydrate (Zn(CH₃COO)₂·2H₂O) and treated MWCNTs. The syntheses were carried out at various microwave irradiation powers. The characterisation of the as-synthesised nanocomposites was conducted by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results revealed that the composites were composed of two phases of MWCNTs and hexagonal wurzite ZnO. The SEM results showed that the ZnO nanoparticles were well decorated on the surface of MWCNTs. The amount of ZnO nanoparticles and their size increased with increasing irradiation power. Thick-film sensors were fabricated onto interdigitated conducting electrodes using as-synthesised hybrid composites as sensing materials. The alcohol-sensing behaviour of the hybrid composite films was investigated. The results indicated that the irradiation power had significant influence on the sensing response of the sensors toward alcohol. The sensor fabricated from the composite synthesised at higher irradiation power exhibited an enhanced alcohol-sensing performance.     

Thermal conductivity of polymer composites based on the length of multi-walled carbon nanotubes

The anisotropic development of thermal conductivity in polymer composites was evaluated by measuring the isotropic, in-plane and through-plane thermal conductivities of composites containing length-adjusted short and long multi-walled CNTs (MWCNTs). The thermal conductivities of the composites were relatively low irrespective of the MWCNT length due to their high contact resistance and high interfacial resistance to polymer resins, considering the high thermal conductivity of MWCNTs. The isotropic and in-plane thermal conductivities of long-MWCNT-based composites were higher than those of short-MWCNT-based ones and the trend can accurately be calculated using the modified Mori-Tanaka theory. The in-plane thermal conductivity of composites with 2 wt% long MWCNTs was increased to 1.27 W/m·K. The length of MWCNTs in polymer composites is an important physical factor in determining the anisotropic thermal conductivity and must be considered for theoretical simulations. The thermal conductivity of MWCNT polymer composites can be effectively controlled in the processing direction by adjusting the length of the MWCNT filler.     

Structure and properties of highly oriented polyoxymethylene/multi-walled carbon nanotube composites produced by hot stretching

Highly-oriented polyoxymethylene (POM)/multi-walled carbon nanotube (MWCNT) composites were fabricated through solid hot stretching technology. With the draw ratio as high as 900%, the oriented composites exhibited much improved thermal conductivity and mechanical properties along the stretching direction compared with that of the isotropic samples before drawing. The thermal conductivity of the composite with 11.6 vol.% MWCNTs can reach as high as 1.2 W/m K after drawing. Microstructure observation demonstrated that the POM matrix had an ordered fibrillar bundle structure and MWCNTs in the composite tended to align parallel to the stretching direction. Wide-angle X-ray diffraction results showed that the crystal axis of the POM matrix was preferentially oriented perpendicular to the draw direction, while MWCNTs were preferentially oriented parallel to the draw direction. The strong interaction between the POM matrix and the MWCNTs hindered the orientation movement of molecules of POM, but induced the orientation movement of MWCNTs.     

The thermal conductivity of embedded nano-aluminum nitride-doped multi-walled carbon nanotubes in epoxy composites containing micro-aluminum nitride particles

Amino-functionalized nano-aluminum nitride (nano-AlN) particles were doped onto the surfaces of chlorinated multi-walled carbon nanotubes (MWCNTs) to act as fillers in thermally conducting composites. These synthesized materials were embedded in epoxy resin. Then, the untreated micro-aluminum nitride (micro-AlN) particles were added to this resin, whereby the composites filled with nano-AlN-doped MWCNTs (0, 0.5, 1, 1.5, 2 wt%) and micro-AlN (25.2, 44.1, 57.4 vol%) were fabricated. As a result, the thermal diffusivity and conductivity of all composites continuously improved with increasing nano-AlN-doped MWCNT content and micro-AlN filler loading. The thermal conductivity reached its maximum, which was 31.27 times that of the epoxy alone, when 2 wt% nano-AlN-doped MWCNTs and 57.4 vol% micro-AlN were added to the epoxy resin. This result is due to the high aspect ratio of the MWCNTs and the surface polarity of the doped nano-AlN and micro-AlN particles, resulting in the improved thermal properties of the epoxy composite.     

Microstructure and mechanical properties of Al2O3 composites with surface-treated carbon nanotubes (CNTs): dispersibility of modified carbon nanotubes (CNTs) on Al2O3 matrix

Aluminum oxide (Al2O3) matrix have been reinforced by the multi-walled carbon nanotubes (MWCNTs) to overcome the inherent brittleness of Al2O3 matrix. In order to increase mechanical properties of MWCNTs-Al2O3 composites, MWCNTs need to be well dispersed and individually incorporated in Al2O3 matrix. In this work, aluminum hydroxide (Al(OH)3) used as a Al2O3 precursor and MWCNTs were mixed in an aqueous solution for the homogeneous mixing of hetero-particles, as functions of the content of MWCNTs and the potential hydrogen (pH) of Al(OH)3 suspension. Firstly, MWCNTs were purified and modified by an acid reagent, inducing that the dispersibility of MWCNTs is increased in an aqueous solution by carboxylic group given on the surface of MWCNTs. The modified MWCNTs were added in the Al(OH)3 suspension, and then the mixture was filtered at room temperature. The filtered powders were formed using an uniaxial pressing and then densified by a pressureless heat treatment. As the pH is decreased the Al(OH)3 particles are well dispersed in an aqueous solution, due to the increment of repulsive force between particles with a same surface charge. MWCNTs are individually incorporated into Al2O3 matrix up to 1 vol.% MWCNTs, whereas MWCNTs are aggregated at the composite with 3 vol.% MWCNTs. Therefore, control of the pH and the MWCNTs content are key factors to be considered for the fabrication of MWCNTs-Al2O3 composites with high functional properties.     

In situ preparation of reinforced polyimide nanocomposites with the noncovalently dispersed and matrix compatible MWCNTs

High performance MWCNT-reinforced polyimide nanocomposites were prepared through in situ polymerization route. 2,6-Diaminoanthraquinone (2,6-DAAQ) was selected to serve as both a diamine comonomer, and a noncovalent dispersant of MWCNTs through π–π interaction. The good dispersion of MWCNTs in both solution and polymer matrix, and high compatibility derived from the structural similarity have been proved to be particularly advantageous for the interfacial adhesion and load transfer from the polymer matrix to MWCNTs. The nanocomposites with 0.50–0.75 wt% MWCNTs had the most excellent thermal stability, thermomechanical and tensile properties, and the electrical conductivity also achieved a sharp increase at such low content. The load transfer efficiency was calculated based on both theoretical model and microscopical size measurement, and the results were rather reasonable within accepted error range.     

多壁碳纳米管/硬脂酸-十八醇@脲醛树脂微胶囊的制备及表征

通过原位聚合法以硬脂酸-十八醇低共融复合相变材料（SA-OA,质量比为50.02%,相变温度为55℃）为芯材,三聚氰胺改性的脲醛树脂（UF）为壁材,氨基化多壁碳纳米管（MWCNTs-NH₂）为高导热填料制备了MWCNTs/SA-OA@UF相变微胶囊。采用FTIR、SEM、DSC、TGA和导热系数仪,对MWCNTs/SA-OA@UF相变微胶囊的化学结构、表面形貌、相变性能和导热性能进行表征。讨论了不同的MWCNTs修饰方法、不同乳化剂种类和MWCNTs-NH₂添加量对SA-OA@UF相变微胶囊的影响。结果表明:MWCNTs-NH₂在溶液中分散性良好;十二烷基苯磺酸钠（SDBS）和曲拉通X-100复配乳化剂使SA-OA@UF相变微胶囊的表面形貌更加光滑平整;添加质量比为0.5%的MWCNTs-NH₂,使MWCNTs/SA-OA@UF相变微胶囊的导热系数达到0.224 W/（m·K）,提高了38%（55℃）,包覆率提高了6.9%,粒度更加均一,热稳定性有明显提高。      

The perovskite CdSnO3 micro-particles modified by multi-walled carbon nanotubes enhance the ethanol gas sensing property

Cubic CdSnO3 and it modified by multi-walled carbon nanotubes (CdSnO3/MWCNTs) have been synthesized by following a mild hydrothermal method. CdSnO3/MWCNTs were characterized by using field emission scanning electron microscope (FE-SEM) and X-ray diffractometer (XRD) techniques. The results show that adding MWCNTs in the processing of synthesis had advantage to the growth of the CdSnO3 crystalline. Meanwhile, a comparative study of gas sensing property of CdSnO3 and CdSnO3/MWCNTs to ethanol vapor has been reported. CdSnO3 and CdSnO3/MWCNTs samples were deposited as thick films to act as gas sensors and their comparative response to ethanol vapor was investigated at different temperatures and concentrations. The results reveal that gas response of CdSnO3/MWCNTs is exceptionally higher than that of CdSnO3. The improvement of the gas sensing property of CdSnO3/MWCNTs might due to the bigger surface area and the better crystalline of CdSnO3/MWCNTs.     

MWCNTs改善WS2/三元乙丙橡胶复合材料的非线性电导特性与热导性能

通过在一定量的纳米WS₂中添加极少量的多壁碳纳米管（MWCNTs）,形成MWCNTs-WS₂复配填料,采用双辊开炼机将三元乙丙橡胶（EPDM）与不同配比的复配填料混合制备了不同MWCNTs含量的MWCNTs-WS₂/EPDM复合材料。并研究了极少量的MWCNTs添加对MWCNTs-WS₂/EPDM复合材料非线性电导性能、直流击穿性能和导热性能的影响。结果表明,极少量的MWCNTs对MWCNTs-WS₂/EPDM复合材料在25℃时的非线性电导特性起到明显的增强作用,且随着MWCNTs含量的增加,复合材料非线性电导特征有明显的规律性变化;由于MWCNTs自身的高电导率和电导正温度系数效应,MWCNTs-WS₂/EPDM复合材料电导率随电场强度的变化趋势在80℃时不再表现非线性特征。另外,极少量的MWCNTs对MWCNTs-WS₂/EPDM复合材料的热导率有明显地改善。      

混杂功能化多壁碳纳米管/环氧树脂复合材料的制备及性能

对多壁碳纳米管(MWCNTs)分别进行共价、非共价和混杂功能化改性, 然后采用溶液共混法, 将三种功能化类型的MWCNTs按不同质量分数分别加入环氧树脂(EP)制备MWCNTs/EP复合材料。通过拉伸试验和热重分析, 研究MWCNTs的功能化类型及含量对复合材料力学性能和热学性能的影响, 并对复合材料拉伸试件断面进行SEM观察分析。结果表明: 与共价功能化复合材料(MWCNTs-Epon828/EP)和非共价功能化复合材料(MWCNTs-PPA/EP)相比, 混杂功能化复合材料(MWCNTs-Epon828-PPA/EP)的力学性能和热学性能最佳。当MWCNTs质量分数为0.3%时, 其拉伸强度、弹性模量和断裂伸长率较纯EP分别提高30%, 62%和26%。      

Effect of multi-walled carbon nanotubes on mechanical,thermal and electrical properties of phenolic foam via in-situ polymerization

In this study, phenolic foam (PF)/multi-walled carbon nanotubes (MWCNTs) composites were fabricated by in-situ polymerization, and carbonized foams based on these PF foams were prepared and the electrical property was investigated. TEM results indicated excellent dispersion of MWCNTs in the phenolic resin matrix. Scanning electron microscope results indicated that PF composites exhibited smaller cell size, thicker cell wall thickness, and higher cell density, compared with pure PF. The incorporating of MWCNTs significantly improved the mechanical properties of PF. All PF composites showed a lower thermal conductivity versus pure PF. Moreover, the carbonized pure and composites PF exhibited open-cell three-dimensional skeleton carbon structure and the MWCNTs were well-dispersed on the surface of the skeletons. It is noteworthy that the introduction of MWCNTs significantly improved the electrical performances of foams and carbonized foams by construction of conductive MWCNTs network.