Synthesis and characterization of polyethylene‐octene elastomer/clay/biodegradable starch nanocomposites

The aim of this work is the production of new nanocomposites from metallocene polyethylene‐octene elastomer (POE), montmorillonite and biodegradable starch by means of a melt blending method. Characterizations of clay, modified clay, POE, POE‐g‐AA, and the hybrids produced from polymer, clay, and/or starch were performed by X‐ray diffraction (XRD) spectroscopy, Fourier transform infrared (FTIR) spectrophotometer, differential scanning calorimetry (DSC), thermogravimetry analyzer (TGA), scanning electron microscope (SEM), and Instron mechanical tester. As to the results, organophilic clay can be well dispersed into acrylic acid grafted polyethylene‐octene elastomer (POE‐g‐AA) in nanoscale sizes since cetyl pyridium chloride is partially compatible with POE‐g‐AA and allows POE‐g‐AA chains to intercalate into clay layers. Based on consideration of thermal and mechanical properties, it is also found that 12 wt % of clay content is optimal for preparation of POE‐g‐AA/clay nanocomposites. The new partly biodegradable POE‐g‐AA/clay/starch hybrid could obviously improve the elongation and the tensile strength at break of the POE‐g‐AA/starch hybrid since the former can give the smaller starch phase size and nanoscale dispersion of silicate layers in the polymer matrix. The nanocomposites produced from our laboratory can provide a stable tensile strength at break when the starch content is up to 40 wt %. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 397–404, 2005     

A one‐pot method to prepare transparent poly(methyl methacrylate)/montmorillonite nanocomposites using imidazolium‐based ionic liquids

Poly(methyl methacrylate) (PMMA)/montmorillonite (MMT) nanocomposites were prepared by a new one‐pot technique, where the hydrophilic Na‐MMT layers were decorated with hydrophobic 1‐dodecyl‐3‐methylimidazolium hexafluorophosphate (C₁₂mimPF₆) ionic liquid in situ during melt blending with PMMA and intercalation of polymer chains took place subsequently. The in situ modification and intercalation of Na‐MMT were confirmed using X‐ray diffraction and transmission electron microscopy. The combination of the compatible C₁₂mimPF₆ with PMMA and the good dispersion of MMT layers at the nanoscale rendered the resultant PMMA/MMT nanocomposites with improved optical transparency, thermal stability and mechanical properties. Copyright © 2012 Society of Chemical Industry     

Effect of Ionomeric Compatibilizer on Clay Dispersion in Polyethylene/Clay Nanocomposites

Summary: Linear low‐density polyethylene (LLDPE)/clay nanocomposites are obtained and studied by using a zinc‐neutralized carboxylate ionomer as a compatibilizer. LLDPE‐g‐MA is used as a reference compatibilizer. Two different clays, natural montmorillonite (Closite Na⁺) and a chemically modified clay Closite 20A have been used. Nanocomposites are prepared by melt blending in a twin‐screw extruder using two mixing methods: two‐step mixing and one‐step mixing. The relative influence of each compatibilizer is determined by wide‐angle X‐ray diffraction structural analysis and mechanical properties. The results are analyzed in terms of the effect of the compatibilizing agent and incorporation method in the clay dispersion, and the mechanical properties of the nanocomposites. Experimental results confirm that the film samples with ionomer show a good mechanical performance only slightly below that of the samples with maleic anhydride (MA). The two‐step mixing conditions result in better dispersion and intercalation for the nanofillers than one‐step mixing. The exfoliation of clay platelets leads to an improved thermal stability of the composite. The oxygen permeability of the clay nanocomposites, using ionomer as a compatibilizer, is decreased by the addition of the clay.

TEM image of a PE/4 wt.‐% Closite 20A nanocomposite formed using ionomer.     

The effect of montmorillonite and compatibilizer quantities on stiffness and toughness of polyamide nanoblends

Although polymer blend nanocomposites are widely studied, the balance between stiffness and toughness has not yet been investigated in detail. Some materials producers as well as some sectors in the automotive industry try to improve the toughness of materials without an important loss in stiffness. With this in mind, the aim of the study reported here was to obtain a good balance between toughness and stiffness of polymer blends with different amounts of clay and compatibilizer. In this context, the microstructure of polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with various amounts of clay (2, 3, 4 and 5 wt%) and compatibilizer (10 and 20 wt%) was studied to analyse the achieved morphology to understand the macroscopic properties. The morphology of the rubber phase and the dispersion of the montmorillonite (MMT) are the main factors that influence the mechanical properties. In this sense, the highest Young's modulus is achieved for nanoblends with 5 wt% of MMT, although this nanoblend has the lowest value of notched Izod impact strength. The results obtained suggest that there is a clear trade‐off between stiffness, toughness and temperature behaviour when the ratio of (ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) to MMT is 5:1. Copyright © 2009 Society of Chemical Industry     

Polylactide/transition metal ion modified montmorillonite nanocomposite—a critical evaluation of mechanical performance and thermal stability

Polylactide (PLA) nanocomposite was prepared by melt blending of PLA and transition metal ion (TMI) adsorbed montmorillonite (MMT). PLA nanocomposite was characterized for mechanical performance, and the results revealed that the tensile modulus, flexural modulus, and impact strength were increased marginally. The nanocomposite was optimized at 5 wt% of TMI‐modified MMT (TMI‐MMT) loading. Thermogravimetric analysis displayed increase in onset of degradation temperature, and differential scanning calorimetry showed marginal increase in glass transition temperature (T_g) and melting temperature (T_m) in case of PLA nanocomposites, when compared with virgin PLA. The flammability testing of nanocomposites indicated good fire retardance characters. X‐ray diffraction patterns of TMI‐MMT and the corresponding nanocomposites indicated an intercalation of the metal ions into the clay interlayer. Fourier transform infrared spectroscopy analysis indicate formation of [Zn(EDA)₂]²⁺ and [Cu(EDA)₂]²⁺ complexes in the MMT interlayer. Dynamic mechanical analysis shows increase in glass transition temperature (T_g) and storage modulus (E′) in case of PLA nanocomposites reinforced with 5 wt% modified MMT. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Nanocomposites formed from linear low density polyethylene and organoclays

Polyethylene-clay nanocomposites were prepared by melt compounding various combinations of a maleic anhydride grafted linear low density polyethylene (LLDPE-g-MA), a linear low density polyethylene (LLDPE), and two organoclays. The two types of organoclay were selected to show the effect of the number of alkyl groups attached to the nitrogen of the organic modifier on exfoliation and improvement of mechanical properties. Nanocomposites derived from the organoclay having two alkyl tails, M₂(HT)₂, exhibited better dispersion and improvement of mechanical properties than nanocomposites based on the organoclay having one alkyl tail M₃(HT)₁. This result is the opposite of what is observed for nylon-6 nanocomposites. In addition, the rheological properties and gas permeability of the nanocomposites derived from the organoclay having two alkyl tails, M₂(HT)₂ were investigated. Both melt viscosity and melt tension (melt strength) increased with increased content of clay (MMT) and LLDPE-g-MA. Gas permeability was decreased by the addition of MMT.     

Thermal,Rheological, and Mechanical Behaviors of LLDPE/PEMA/Clay Nanocomposites: Effect of Interaction Between Polymer,Compatibilizer, and Nanofiller

Summary: Linear low density polyethylene/maleic anhydride grafted polyethylene/montmorillonite clay (LLDPE/PEMA/clay) nanocomposites prepared using a co‐rotating twin screw extruder exhibit unique thermal, rheological, and mechanical behaviors. All the mechanical properties including ductility increase with clay loading. X‐ray diffraction analysis and TEM images reveal an intercalated clay structure for the LLDPE/PEMA/clay composite with 5% clay and an exfoliated structure for that with 2% clay. Differential scanning calorimetry shows that the addition of PEMA does not influence the melting temperature but favors the formation of more thin lamellas. Rheological characterization indicates that the LLDPE‐PEMA blend has similar rheological behavior to neat LLDPE, implying the two polymers are completely miscible. The composites exhibit significantly higher storage and loss modulus and complex viscosity at low frequencies, and the magnitude of all these properties increases with clay loading. Furthermore, the slopes of G′, G″, and complex viscosity versus frequency are similar for the composites of different phase morphologies, suggesting that the rheological behaviors of the composites depends more on clay loading than phase morphology. The enhanced miscibility between LLDPE and PEMA, and more importantly, interfacial interaction between clay, PEMA, and LLDPE, are responsible for the distinct improvement in all the mechanical properties of the composite, and in particular for the marked improvement in ductility.

Stress‐strain diagram for LLDPE, LLDPE/PEMA, and LLDPE/PEME‐clay nanocomposites.     

Property enhancement in polypropylene ternary blend nanocomposites via a novel poly(ethylene oxide)‐grafted polystyrene‐block‐poly(ethylene/butylene)‐block‐polystyrene toughener–compatibilizer system

Synthesis and characterization of a novel toughener–compatibilizer for polypropylene (PP)–montmorillonite (MMT) nanocomposites were conducted to provide enhanced mechanical and thermal properties. Poly(ethylene oxide) (PEO) blocks were synthetically grafted onto maleic anhydride‐grafted polystyrene‐block‐poly(ethylene/butylene)‐block‐polystyrene (SEBS‐g‐MA). Special attention was paid to emphasize the effect of PEO‐grafted SEBS (SEBS‐g‐PEO) against SEBS‐g‐MA on morphology, static/dynamic mechanical properties and surface hydrophilicity of the resultant blends and nanocomposites. It was found that the silicate layers of neat MMT are well separated by PEO chains chemically bonded to nonpolar SEBS polymer without needing any organophilic modification of the clay as confirmed by X‐ray diffraction and transmission electron microscopy analyses. From scanning electron microscopy analyses, elastomeric domains interacting with MMT layers via PEO sites were found to be distributed in the PP matrix with higher number and smaller sizes than the corresponding blend. As a benefit of PEO grafting, SEBS‐g‐PEO‐containing nanocomposite exhibited not only higher toughness/impact strength but also increased creep recovery, as compared to corresponding SEBS‐g‐MA‐containing nanocomposite and neat PP. The damping parameter of the same nanocomposite was also found to be high in a broad range of temperatures as another advantage of the SEBS‐g‐PEO toughener–compatibilizer. The water contact angles of the blends and nanocomposites were found to be lower than that of neat hydrophobic PP which is desirable for finishing processes such as dyeing and coating. © 2018 Society of Chemical Industry     

Kinetics of thermal degradation of nanometer calcium carbonate/linear low‐density polyethylene nanocomposites

To improve the thermal properties of linear low‐density polyethylene (LLDPE), the CaCO₃/LLDPE nanocomposites were prepared from nanometer calcium carbonate (nano‐CaCO₃) and LLDPE by melt‐blending method. A series of testing methods such as thermogravimetry analysis (TGA), differential thermogravimetry analysis, Kim‐Park method, and Flynn‐Wall‐Ozawa method were used to characterize the thermal property of CaCO₃/LLDPE nanocomposites. The results showed that the CaCO₃/LLDPE nanocomposites have only one‐stage thermal degradation process. The initial thermal degradation temperature T₀ increasing with nano‐CaDO₃ content, and stability of LLDPE change better. The thermal degradation activation energy (E_a) is different for different nano‐CaCO₃ content. When the mass fraction of nano‐CaCO₃ in nanocomposites is up to 10 wt %, the nanocomposite has the highest thermal degradation E_a, which is higher (28 kJ/mol) than pure LLDPE. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Catalytic activity during the preparation of PE/clay nanocomposites by in situ polymerization with metallocene catalysts

Catalytic activity during the formation of polyethylene (PE)/clay nanocomposites by in situ polymerization with metallocenes was studied. Ethylene polymerization was carried out with the homogeneous metallocene in the presence of the clay particles and using the clay‐supported metallocene catalyst. It was found that the catalytic activity of the homogeneous metallocene does not decrease in the presence of the clay particles and only a slight decrease of activity occurs using the clay‐supported catalyst. The modification of the clay with MAO cocatalyst as well as its intercalation with ODA surfactant were found to play an important role during the in situ formation of the PE/clay nanocomposite. ODA‐intercalated clay apparently facilitates the activation and monomer insertion processes on zirconocene centers located in internal sites of the clay structure. Although metallocene supported on MAO‐treated clay exhibited somewhat lower catalytic activity than that supported directly on the ODA‐intercalated clay, both systems favored the production of PE nanocomposites containing highly exfoliated clay particles. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Experimental and computational investigation of EVOH/clay nanocomposites

Ethylene–vinyl alcohol copolymer (EVOH)/organoclay nanocomposites were prepared via a dynamic melt‐intercalation process. The effect of compatibilizers on the melt blending torque, intercalation level, and morphology of EVOH/organoclay systems was investigated. Maleic anhydride grafted ethylene vinyl acetate (EVA‐g‐ MA), or maleic anhydride grafted linear low‐density polyethylene (LLDPE‐g‐MA), were used to compatibilize EVOH with clay, at various concentrations (1, 5, and 10 wt %). Computer‐simulation techniques are used to predict structural properties and interactions of EVOH with compatibilizers in the presence and absence of clay. The simulation results strongly support the experimental findings and their interpretation. X‐ray diffraction shows enhanced intercalation within the galleries when the compatibilizers were added. Interestingly, results were obtained for the EVOH/clay/compatibilizer systems, owing to a high level of interaction developed in these systems. Thermal analysis shows that, upon increasing the compatibilizer content, lower crystallinity levels result, until at a certain compatibilizer content no crystallization is taking place. Significantly higher mixing viscosity levels were obtained for the EVOH/organoclay blends compared with the neat EVOH polymer. The storage modulus was higher compared with the uncompatibilized EVOH/organoclay blend in the presence of EVA‐g‐MA compatibilizer (at all concentrations), and only at low contents of LLDPE‐g‐MA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2060–2066, 2005     

Morphology and thermal stabilization mechanism of LLDPE/MMT and LLDPE/LDH nanocomposites

The morphology and thermal stabilization mechanism of polymeric nanocomposites prepared by solution intercalation of linear low density polyethylene (LLDPE) with montmorillonite (MMT), MgAl layered double hydroxide (LDH), and ZnAl LDH have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). Both LLDPE/MMT and LLDPE/MgAl LDH nanocomposites exhibit mixed intercalated-exfoliated structures, whereas the LLDPE/ZnAl LDH nanocomposites exhibit completely exfoliated structures because the ZnAl LDH layers can be easily broken during the refluxing process. All nanocomposites show significantly enhanced thermal stability compared with virgin LLDPE due to the increases of the effective activation energy (E_α) during degradation process. However, LDHs nanocomposites show much higher thermal degradation temperatures than MMT nanocomposites with the same filler content because they have much higher E_α than MMT nanocomposites at the early degradation stage. The data of real time FTIR spectroscopy and morphological evolution reveal a catalytic dehydrogenation effect presents in MMT nanocomposites, which may decrease the E_α of degradation and thermal stability of MMT nanocomposites.     

Implications of melt compatibility/incompatibility on thermal and mechanical properties of metallocene and Ziegler–Natta linear low density polyethylene (LLDPE) blends with high density polyethylene (HDPE): influence of composition distribution and branch content of LLDPE

In this paper, the implications of melt compatibility on thermal and solid‐state properties of linear low density polyethylene/high density polyethylene (LLDPE/HDPE) blends were assessed with respect to the effect of composition distribution (CD) and branch content (BC). The effect of CD was studied by melt blending a metallocene (m‐LLDPE) and a Ziegler‐Natta (ZN) LLDPE with the same HDPE at 190 °C. Similarly, the effect of BC was examined. In both cases, resins were paired to study one molecular variable at a time. Thermal and solid‐state properties were measured in a differential scanning calorimeter and in an Instron mechanical testing instrument, respectively. The low‐BC m‐LLDPE (BC = 14.5 CH₃/1000 C) blends with HDPE were compatible at all compositions: rheological, thermal and some mechanical properties followed additivity rules. For incompatible high‐BC (42.0 CH₃/1000 C) m‐LLDPE‐rich blends, elongation at break and work of rupture showed synergistic effects, while modulus was lower than predictions of linear additivity. The CD of LLDPE showed no significant effect on thermal properties, elongation at break or work of rupture; however, it resulted in low moduli for ZN‐LLDPE blends with HDPE. For miscible blends, no effect for BC or CD of LLDPE was observed. The BC of LLDPE has, in general, a stronger influence on melt and solid‐state properties of blends than the CD. Copyright © 2004 Society of Chemical Industry     

The effect of clay dispersion on the properties of LLDPE/LLDPE‐g‐MAH/montmorillonite nanocomposites

In this work, three coupling agents presenting different grafting contents and molecular weights were used to prepare linear low density polyethylene (LLDPE)/linear low density polyethylene grafted with maleic anhydride (LLDPE‐g‐MAH)/montmorillonite nanocomposites with various morphologies. The clay dispersion was analyzed at the micrometric level by scanning electron microscopy and at the nanometric level by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). It was found that coupling agents having intermediate molecular weights led to the highest exfoliation extents, whereas the coupling agent presenting the highest molecular weight led to a poor delamination of the clay platelets. The properties of the nanocomposites produced and of their LLDPE/LLDPE‐g‐MAH reference blends were analyzed. It was shown that the best improvements in mechanical and barrier properties are not necessarily achieved for the nanocomposites, exhibiting the highest exfoliation extents. The length of the tactoids also plays a crucial role on the macroscopic properties. In addition, a high level of delamination could result in a loss of reinforcement effect, due to the inherent flexibility of the individual clay platelets. Finally, the strength of the clay/polymer interface, which was evaluated through surface tension measurements, seems to play a significant role on the properties of the nanocomposites. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.     

Preparation and characteristics of nitrile rubber (NBR) nanocomposites based on organophilic layered clay

The effect of clay modification on organo‐montmorillonite/NBR nanocomposites has been studied. Organo‐montmorillonite/NBR nanocomposites were prepared through a melt intercalation process. NBR nanocomposites were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), dynamic mechanical thermal analysis (DMTA) and a universal testing machine (UTM). XRD showed that the basal spacing in the clay increased, which means that the NBR matrix was intercalated in the clay layer galleries. On TEM images, organo‐montmorillonite (MMT) particles were clearly observed, having been exfoliated into nanoscale layers of about 10–20 nm thickness from their original 40 µm particle size. These layers were uniformly dispersed in the NBR matrix. The DMTA test showed that for these nanocomposites the plateau modulus and glass transition temperature (T_g) increased with respect to the corresponding values of pure NBR (without clay). UTM test showed that the nanocomposites had superior mechanical properties, ie strength and modulus. These improved properties are due to the nanoscale effects and strong interactions between the NBR matrix and the clay interface. Copyright © 2003 Society of Chemical Industry     

Influence of clay and predispersion method on the structure and properties of polystyrene (PS)‐clay nanocomposites

To prepare the polystyrene (PS)‐clay nanocomposites via an in situ emulsion polymerization, a clay predispersion method, i.e. dispersing the organic clay in the emulsifier solution by the assistance of ultrasonic, was proposed in this study. The conventional method, predispersing the organic clay into the monomer, was also presented for the comparison. The morphology analysis based on the X‐ray Deflection (XRD) and Transmission Electronic Microscopy (TEM) results suggested that the more uniform clay dispersion in the final nanocomposites could be achieved through the new method. The inorganic clay (Na‐MMT) and two organic clays (C₁₈‐MMT and VC₁₈‐MMT) synthesized by exchanging inorganic cations with the trimethyloctadecyl ammonium chloride (OTAC) and the vinylbenzyldimethyloctadecyl ammoniun chloride (VOAC) were chosen to investigate the influence of the clay surface modification on the properties of nanocomposites. The Dynamic Mechanical Analysis (DMA) results showed the storage modulus G′s of the nanocomposites had different enhancements over that of the pure PS, especially when the temperature approached the glass transition temperature (T_g). The T_gs of the nanocomposites, however, varied with the microstructure and the interactions between the polymer and the clay layers. The Na‐MMT and VC₁₈‐MMT increased the T_g, while the T_gs of PS/C₁₈‐MMT nanocomposites were slightly lower than that of the pure PS. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Preparation of linear low‐density polyethylene by in situ copolymerization of ethylene with Zr supported on montmorillonite/Fe/methylaluminoxane catalyst system

Linear low‐density polyethylene (LLDPE) was prepared by in situ copolymerization of ethylene with dual‐functional catalysts that were composed of rac‐Et(Ind)₂ZrCl₂ supported on montmorillonite (MMT) and {[(2‐ArN?C(Me))₂C₅H₃N]FeCl₂} [Ar = 2,4‐C₆H₄(Me)₂] oligomerization catalyst. A series of polyethylenes with different degrees of branching were obtained by adjusting the ratio of Fe and Zr (Fe/Zr). DSC, NMR, GPC, SEM, and density‐gradient method were used to characterize the polymers. With increasing Fe/Zr ratio, the densities and melting points of polymers decreased, whereas the branching degrees and molecular weights increased. When the Fe/Zr ratio was increased, the activities of the catalysts decreased at atmospheric pressure and increased at 0.7 MPa ethylene pressure. SEM micrographs revealed that the morphology of branched polyethylene, produced with the catalyst supported on MMT, is better than that produced by the catalyst in a homogeneous system. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1690–1696, 2004     

Optically transparent polycarbonate/clay nanocomposites with improved performance using phosphonium modified organoclay: Preparation and characterizations

The present work focuses on the morphology and properties of polycarbonate (PC)/clay nanocomposites prepared through melt blending and solution blending at two different loadings of organoclay (0.5 and 1 phr). The oraganoclay was prepared by incorporating thermally 2‐oxopropyl triphenyl phosphonium ion (OTPP) into the clay gallery with an intention to preserve the optical transparency of PC in the PC/clay nanocomposites. An increase in gallery height from 1.24 to 1.86 nm along with the extraordinary thermal stability (∼1.34% wt loss at 280°C, after 20 min) of the OTPP modified montmorillonite (OTPP‐MMT) made it suitable for retention of optical transparency of PC and delamination of the clay platelets in the nanocomposites. The morphological analysis revealed that the clay platelets were randomly dispersed into the PC matrix. An increase in glass transition temperature (T_g) as well as thermal stability of the PC in the nanocomposites was evident from thermal analysis. The strength and modulus of PC increased extensively with increase in OTPP‐MMT loading in the nanocomposites. The nanocomposites were found to retain optical transparency of PC without generation of any color in both the blending technique. POLYM. COMPOS., 199–212, 2016. © 2014 Society of Plastics Engineers     

Structural characterization of hydrophilic polymer blends/montmorillonite clay nanocomposites

The nanocomposite films comprising polymer blends of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), poly(ethylene oxide) (PEO), and poly(ethylene glycol) (PEG) with montmorillonite (MMT) clay as nanofiller were prepared by aqueous solution casting method. The X‐ray diffraction studies of the PVA–x wt % MMT, (PVA–PVP)–x wt % MMT, (PVA–PEO)–x wt % MMT and (PVA–PEG)–x wt % MMT nanocomposites containing MMT concentrations x = 1, 2, 3, 5 and 10 wt % of the polymer weight were carried out in the angular range (2θ) of 3.8–30°. The values of MMT basal spacing d₀₀₁, expansion of clay gallery width W_cg, d‐spacing of polymer spherulite, crystallite size L and diffraction peak intensity I were determined for these nanocomposites. The values of structural parameters reveal that the linear chain PEO and PEG in the PVA blend based nanocomposites promote the amount of MMT intercalated structures, and these structures are found relatively higher for the (PVA–PEO)–x wt % MMT nanocomposites. It is observed that the presence of bulky ester‐side group in PVP backbone restricts its intercalation, whereas the adsorption behavior of PVP on the MMT nanosheets mainly results the MMT exfoliated structures in the (PVA–PVP)–x wt % MMT nanocomposites. The crystallinities of the PEO and PEG were found low due to their blending with PVA, which further decreased anomalously with the increase of MMT concentration in the nanocomposites. The decrease of polymer crystalline phase of these materials confirmed their suitability in preparation of novel solid polymer nanocomposite electrolytes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40617.     

Synthesis and evaluation of high‐performance ethylene–propylene–diene terpolymer/organoclay nanoscale composites

The main objective of this study was to synthesize and characterize the properties of ethylene–propylene–diene terpolymer (EPDM)/clay nanocomposites. Pristine clay, sodium montmorillonite (Na⁺–MMT), was intercalated with hexadecyl ammonium ion to form modified organoclay (16Me–MMT) and the effect of intercalation toward the change in interlayer spacing of the silicate layers was studied by X‐ray diffraction, which showed that the increase in interlayer spacing in Na⁺–MMT by 0.61 nm is attributed to the intercalation of hexadecyl ammonium ion within the clay layers. In the case of EPDM/16Me–MMT nanocomposites, the basal reflection peak was shifted toward a higher angle. However, gallery height remained more or less the same for different EPDM nanocomposites with organoclay content up to 8 wt %. The nanostructure of EPDM/clay composites was characterized by transmission electron microscopy, which established the coexistence of intercalated and exfoliated clay layers with an average layer thickness in the nanometer range within the EPDM matrix. The significant improvement in thermal stability and mechanical properties reflects the high‐performance nanocomposite formation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2429–2436, 2004