Preparation of an acrylic‐grafted polyester and its aqueous dispersion: Grafting utilizing alternating copolymerization

An investigation was undertaken to develop a new method to obtain fine dispersion of grafted polyester without gelation. As a new method, grafting utilizing alternating copolymerization of hydrophilic polymers to unsaturated polyester was discussed. By use of grafting utilizing alternating copolymerization, the reaction tendency of grafted polymer radical for an unsaturated bond of the polyester was changed. The grafting utilizing alternating copolymerization was compared with the conventional grafting, and the calculated grafting efficiency is about twice. Moreover, it was possible to increase the incorporation of less reactive monomers into the grafted side chain by the grafting utilizing alternating copolymerization. From the above results, the grafting utilizing alternating copolymerization is considered a useful method to prepare grafted polymers. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1395–1403, 1999     

Volume‐expandable monomer 5,5‐dimethyl‐1,3‐dioxolan‐2‐one: Its copolymerization behavior with epoxide and its applications to shrinkage‐controlled epoxy‐curing systems

The copolymerization of epoxides and a six‐membered cyclic carbonate, 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DM6CC), was carried out with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as an initiator. In the copolymerization of glycidyl phenyl ether (GPE) and DM6CC, DM6CC remarkably accelerated the polymerization rate of GPE and also effectively suppressed chain‐transfer reactions, which occur in the homopolymerization of the epoxide. This suppression resulted in the formation of the corresponding copolymer with a higher molecular weight. Similar effects of DM6CC were also observed in a curing system with a Novolac‐type multifunctional epoxide (Novolac glycidyl ether). The curing reaction of the epoxide in the presence of DM6CC smoothly proceeded and yielded the corresponding networked polymer, showing a decrease in the volume shrinkage as the DM6CC content increased. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 372–378, 2005     

Optical and electronic properties of 3,4‐dialkylthiophene‐based p‐/n‐alternating copolymers

Four novel highly soluble p‐/n‐poly[(2,5‐divinyl‐3,4‐dialkylthiophene)‐alt‐2,6‐pyridine] (PA₂TV‐Py) and poly[(2,5‐divinyl‐3,4‐dialkylthiophene)‐alt‐(2,5‐diphenyl‐1,3,4‐oxadiazole)] (PA₂TV‐OXD) are prepared by Heck coupling approach to compare their photoelectric properties. Characterizations of the copolymers include FT‐IR, ¹H‐NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), UV–vis spectroscopy, photoluminescence (PL), and electroluminescence (EL). Four alt‐copolymers exhibit excellent solubility in common organic solvents (e.g., CHCl₃, THF) and good thermal stabilities, losing less than 5% on heating to ～ 250°C. The optical properties depict that the band‐gap energy of PA₂TV‐Py and PA₂TV‐OXD is similarly, ranging from 2.68 to 2.80 eV in solid film and 2.90–2.97 eV in CHCl₃ solution. PA₂TV‐Pys can emit bright turquoise light with quantum efficiencies (QE) of 30.6 and 53.9%, which about 10‐18 times higher than that of homopolymer in CHCl₃ solution. Furthermore, the QE of two PA₂TV‐OXDs (purple fluorescence) are increased to 43.6 and 68.5%, respectively, about 1.3–1.4 times higher than that of PA₂TV‐Pys. Electrochemical results indicate that the electron affinity (E_a) of four alt‐copolymers range from 2.79 to 3.09 eV, which are propitious to electrons injecting and transporting from the cathode. As a result, these novel copolymers present expected good electroluminescence(EL) performance in their single layer polymer light‐emitting device (PLED) with configuration of ITO/polymer/Al, which turn‐on voltages are between 4.0 and 5.8 V and emit bright green–yellow (538 nm) and yellow (545–552 nm) EL light. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of 3,4‐dihydroxyphenylacetic acid imprinted polymers

Eight molecularly imprinted polymers (MIP1–MIP8) were synthesized with different functional monomers and porogens using 3,4‐dihydroxyphenylacetic acid (DOPAC) as a template. Thermal, radical bulk polymerization was employed in the presence of ethylene glycol dimethacrylate as a cross‐linker. A computational analysis indicated that complexes with four molecules of 4‐vinylpyridine, 1‐vinylimidazole and acrylonitrile had high positive enthalpies of formation. The polymers synthesized with these monomers showed an imprinting factor below 1. Polymer MIP8 synthesized with allylamine as the functional monomer, with the highest energy of interaction with DOPAC, was characterized by the highest imprinting factor equal to 1.91. Examination of the binding ability of DOPAC and a group of structurally related compounds showed that the strong interactions between amine groups in the polymer and carboxylic groups in the analyte governed the recognition mechanism. The Langmuir adsorption model and the pseudo‐second‐order mechanism properly evaluated the MIP8 and non‐imprinted polymer 8 adsorption characteristics. Scatchard analysis revealed that MIP8 had two classes of heterogeneous binding sites with K_d(1) = 0.12 µmol L^?1 and K_d(2) = 1.46 µmol L^?1. Finally, the potential application of MIP8 for separation of DOPAC was demonstrated. Copyright © 2011 Society of Chemical Industry     

Photoinitiated alternating copolymerization of vinyl ethers with chlorotrifluoroethylene

The photoinitiated copolymerization of chlorotrifluoroethylene (CTFE) with several vinyl ethers [ethyl vinyl ether (EVE), 2‐chloroethyl vinyl ether (CEVE), cyclohexyl vinyl ether (CHVE), 4‐hydroxybutyl vinyl ether (HBVE)] was studied. CTFE is an acceptor monomer (e ～ 1.5) whereas vinyl ethers are donor monomers (e ～ ?1.5), and therefore their copolymerization led to alternating copolymers, as indicated by elementary analysis. The equilibrium constant (K_F) of the charge‐transfer complex formation (CTC) was determined by ¹⁹F NMR spectroscopy. Under our experimental conditions, K_F was low for CHVE/CTFE and HBVE/CTFE systems, 0.058 and 0.013 l mol^?1 respectively. It can be assumed that the copolymerization involves the free monomers rather than propagation via the donor–acceptor complex. The alternating structure arises from the great difference in polarity between the two types of monomers. Several functional copolymers were prepared in good yield and with molecular weight close to 15 000 g mol^?1. © 2002 Society of Chemical Industry     

In-chain functionalization by alternating anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene

Anionic copolymerizations of styrene (M₁) with excess 1-(4-dimethyl-aminophenyl)-1-phenylethylene (M₂) were conducted in benzene at 25°C for 24h, using sec-butyllithium as initiator. Narrow molecular weight distribution copolymers with M?;_n = 16.1 × 10³ g/mol (M?_w/M?_n = 1.04) and 38.2 × 10³g/mol (M?_w/M?_n = 1.05), and 24 and 38 moles of M₂ per macromolecule, respectively, were characterized by size exclusion chromatography, ¹H NMR spectroscopy and DSC. The monomer reactivity ratio, r₁ = 5.6, was obtained from the copolymer composition at complete consumption of M₁, assuming that the rate constant k₂₂ =0,i.e. r₂ =0. The polymers exhibited T_g values of 128 and 119°C, respectively, which correspond to an estimated T_g = 217°C for the hypothetical homopolymer of M₂.     

Direct synthesis and characterization of crosslinked polysiloxanes via anionic ring‐opening copolymerization with octaisobutyl‐polyhedral oligomeric silsesquioxane and octamethylcyclotetrasiloxane

The crosslinked polysiloxanes were directly synthesized by anionic ring‐opening copolymerization of octaisobutyl‐polyhedral oligomeric silsesquioxane (POSS) as a multifunctional monomer with octamethylcyclotetrasiloxane (D₄) under base catalysts such as potassium hydroxide (KOH) or tetramethylammonium hydroxide (Me₄ NOH) siloxanolate. The mechanism of anionic ring‐opening copolymerization of octaisobutyl‐POSS and D₄ was discussed and the influences of the polar additive N,N‐dimethylacetamide on gelation time at different temperatures were investigated. The results of gel content and swelling ratio, GPC, solid‐state ²⁹Si and ¹³C NMR, FTIR, XRD show that octaisobutyl‐POSS is reacted and most of the product is crosslinked. The DSC and TG results indicate that the crosslinked polysiloxanes exhibit distinct glass transition temperatures (T_g) and excellent thermal stability. Compared to that under KOH siloxanolate, the crosslinked polysiloxane synthesized with Me₄NOH siloxanolate has better preferable thermal stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3848–3856, 2006     

Synthesis of a new tetrafunctional monomer, 1,4‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)phenol,and its copolymerization

The new aromatic tetrafunctional methacrylate monomer, 1,4‐di(2‐hydroxy‐3‐methacryloyloxypropoxy) phenol, and its application for the synthesis of porous microspheres have been presented. It was copolymerized with trimethylolpropane trimethacrylate in the presence of pore‐forming diluents mixture (chlorobenzene and 1‐decanol). The results indicate that composition of diluents mixture influence porous structure of copolymers. The porous structure of the copolymer obtained in the presence of 50% chlorobenzene was studied in detail. The results show that pore volume and the most probable pore size diameters determined for the copolymer in the dry and in the wetted states are different. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Nitroxide‐mediated homopolymerization and copolymerization of 2‐vinylpyridine with styrene

Homopolymerization and copolymerization of 2‐vinylpyridine (2VP) with styrene (S) at 125°C in the presence of 2,2,6,6‐tetramethyl piperidin‐1‐yloxyl (TEMPO) radicals have been studied. The homopolymerization was carried out with 2,2′‐azobis(isobutyronitrile) (AIBN) as a thermal initiator or without AIBN in the initial reaction mixture. In the copolymerization initiated with AIBN, the molar fraction of 2VP in the feed, F_2VP, varied in the range of 0.1–0.9; F_2VP = 0.65 was found to be the azeotropic composition. The linear semilogarithmic time–conversion plots demonstrated a pseudoliving nature of the polymerizations under study. The molecular weight–conversion dependences indicated the participation of side reactions, diminishing the number of TEMPO‐terminated polymer chains. The synthesized homopolymers and copolymers were characterized using size‐exclusion chromatography (SEC), nitrogen analysis, and NMR spectroscopy. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2024–2030, 2001     

Synthesis and solid‐state properties of crosslinked alternating copolymers of phenyl vinylethylene carbonate and N‐substituted maleimides

The copolymers of phenyl vinylethylene carbonate (PVEC) and N‐phenylmaleimide were prepared with various monomer feeds by using a radical initiator. These copolymers were crosslinked by aminolysis between hexamethylenediamine (HMDA) and cyclic carbonate moiety in the side‐chain to obtain the networked polymers having the hydroxyurethane structure. Furthermore, the crosslinked copolymers having the polar cyclic carbonate in the side‐chain were synthesized from PVEC and several bifunctional maleimides, and their double networked polymers were prepared with HMDA. These copolymers and networked polymers exhibited color changes depending on their structures based on the acid–base switching in the solid‐state. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45247.     

Convenient Approach to 3,4‐Diarylisoxazoles Based on the Suzuki Cross‐Coupling Reaction

The Suzuki cross‐coupling reaction was found effective for rapid access to a series of 3,4‐diarylisoxazoles of pharmacological interest. The efficiency of this approach was demonstrated by the synthesis of the highly potent COX‐2‐selective inhibitor, 4‐(5‐methyl‐3‐phenyl‐4‐isoxazolyl)benzenesulfonamide (valdecoxib), and its analogues. Thus, the coupling reaction between (3‐aryl‐5‐methyl‐4‐isoxazolyl)boronic acids, prepared in situ from the corresponding bromides using triisopropyl borate, and aryl bromides containing a 4‐sulfonamide or 4‐methylsulfonyl group under the standard conditions [Pd(PPh₃)₄, Na₂CO₃, EtOH‐H₂O, reflux] yielded the target 3,4‐diarylisoxazoles in good yields.     

Synthesis and properties of polymer from bis‐3,4‐ethylenedioxythiophene substituted acenaphthenequinoxaline

A new electrochoromic polymer poly(8,11‐bis(3,4‐ethylenedioxy thiophen‐2‐yl)acenaphtho[1,2‐b]‐quinoxaline) (PBEAQ) was synthesized by electrochemical polymerization of the corresponding monomer (BEAQ) in a 0.1 M tetraethylammonium tetrafluoroborate (TEABF₄) dichloromethane–acetonitrile (2 : 1, v : v) solution. The monomer and polymer were characterized by elemental analysis, ¹H‐NMR, IR, and UV‐vis spectroscopy. The electrochemical and optical properties of polymer were investigated by cyclic voltammetry and UV‐vis spectroscopy. Cyclic voltammetry and spectroelectrochemistry studies demonstrated that the polymer can be reversibly reduced and oxidized (both n‐ and p‐doped) between ?2 V and +1.5 V vs. Ag/Ag⁺. The polymer had a transmissive light blue color in the oxidized state and reddish color in the reduced state. Undoped polymer shows UV‐vis absorption peaks at 615 nm in solution, 650 nm in solid state, and has an optical band gap of 1.5 eV. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Anionic polymerization of 1,3‐cyclohexadiene: Addition of poly(1,3‐cyclohexadienyl)lithium to fullerene‐C60

The addition of poly(1,3‐cyclohexadiene) (PCHD) carbanion to fullerene‐C₆₀ (C₆₀) was examined using poly(1,3‐cyclohexadienyl)lithium (PCHDLi), PCHDLi/1,4‐diazabicyclo[2,2,2]octane (DABCO), and PCHDLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA). The reactivity of PCHD carbanions was in the order of PCHDLi > PCHDLi/DABCO > PCHDLi/TMEDA, regardless of the polymer main chain structure. PCHDLi, PCHDLi/DABCO, and PCHDLi/TMEDA in toluene formed σ‐structures, σ‐ and π‐structures, and π‐structures, respectively. The degree of localization on the terminal carbanion was a main factor for control of this addition reaction. In addition, all 1,2‐cyclohexadiene (1,2‐CHD) unit sequences contributed to preventing the addition reaction. That is, large steric hindrance of the polymer main chain was another important factor to control the addition reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of novel phosphorous‐containing biphenol, 2‐(5, 5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐1,4‐benzenediol and its application as flame‐retardant in epoxy resin

A novel phosphorous‐containing biphenol, 2‐(5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorin‐6‐yl)‐ 1,4‐benzenediol (DPODB), was prepared by the addition reaction between 5,5‐dimethyl‐4‐phenyl‐2‐oxy‐1,3,2‐dioxaphosphorinane phosphonate (DPODP) and p‐benzoquinone (BQ). The compound (DPODB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) for electronic application. The structure of DPODB was confirmed by FTIR and NMR spectra. Thermal properties of cured epoxy resin were studied using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was tested by UL‐94 vertical test and achieved UL‐94 vertical tests of V‐0 grade (nonflammable). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3842–3847, 2006     

Controlled radical alternating copolymerization of N‐phenyl maleimide with ethyl α‐ethylacrylate by reversible addition fragmentation chain‐transfer process

The alternating copolymerization of N‐phenyl maleimide (NPMI) with ethyl α‐ethylacrylate (EEA) by the reversible addition fragmentation chain‐transfer process was investigated. The monomer reactivity ratios were measured and r₁ = 0.19 ± 0.03 for NPMI and r₂ = 0.20 ± 0.04 for EEA. It was found that before about 45% of the comonomer conversion, the molecular weight of the copolymer increased with the conversion, the molecular weight distribution was rather narrow, and the molecular weight of the copolymer approached a constant value, irrespective of the length of the polymerization time. Electronic spin resonance determined that the radical signal disappeared quickly after the conversion of comonomer exceeded 45%, which may be attributed to the coupling termination of the propagating polymer chains with the EEA end with the intermediate radicals when the concentration of comonomers decreased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2376–2382, 2004     

Electrochemical copolymerization of carbazole and 3‐methylthiophene

The copolymerization of carbazole (CZ) and 3‐methylthiophene (3MeT) was successfully performed electrochemically in freshly distilled boron trifluoride diethyl etherate by direct anodic oxidation of the monomer mixtures, although the oxidation potentials of CZ and 3MeT were quite different. The electrochemical properties of the copolymers were studied with cyclic voltammetry. The influence of the applied polymerization potential on the synthesis of the copolymers was investigated. The higher potential favored the incorporation of 3MeT units into the copolymers. The insertion of 3MeT units into polycarbazole (PCZ) was helpful in improving the conductivity of PCZ. The novel copolymers had the advantages of both PCZ and poly(3‐methylthiophene), that is, good redox activity, good thermal stability, and high conductivity. The structure and morphology of the copolymers were investigated with ultraviolet–visible, infrared spectroscopy, thermal analysis, and scanning electron microscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1877–1885, 2006     

Chemical composition distribution study in ethylene/1‐hexene copolymerization to produce LLDPE material using MgCl2‐TiCl4‐based Ziegler‐Natta catalysts

The characteristic features of LLDPE polymerization with ZN catalyst are the time drift effect during polymerization and the bending effect when trying to decrease density of the copolymer by adding more comonomer to the polymerization. The time drift in LLDPE polymerization is revealed by a constant decrease of comonomer incorporation during polymerization time. The bending is revealed by difficulties in lowering the density of LLDPE material below the density of 920 kg/m³. With increasing comonomer content during polymerization, the density does not decrease, but the soluble fraction increases. To try to observe if these phenomena are connected, two types of catalysts, SiO₂ supported and precipitated MgCl₂ ZN catalysts, were studied. A short time (10 min) and an extended time (60 min) copolymerization test series where the polymerizations were performed in the presence of a gradually increasing comonomer amount. Both catalysts show a strong bending when density is presented as a function of 1‐hexene both in 10‐ and 60‐min polymerization, indicating no connection between time drift and bending. The density, melting point, and crystallinity results all indicate that both catalysts are making similar copolymer material with identical chemical composition distribution. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Spontaneous copolymerization of N‐butyl maleimide and ethyl α‐phenyl acrylate with high alternating tendency

The copolymerization of N‐butyl maleimide (BMI) and ethyl α‐phenyl acrylate (EPA) was successfully carried out without an initiator. A high alternating tendency was observed. The Q, e values were derived by Alfrey–Price equations: Q = 0.09, e = 0.81 for BMI and Q = 0.21, e = ?0.5 for EPA, and the monomer reactivity ratios were r_BMI = 0.15 ± 0.01 and r_EPA = 0.18 ± 0.08, respectively. In this system BMI was donor and EPA was acceptor. The maximum copolymerization rate and molecular weight appeared at 70 mol % (BMI) in the feed ratio. The spontaneous alternating copolymerization was considered to be completed by a contact‐type charge‐transfer complex formed by the monomer pairs. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 355–360, 2004     

Thermal and Combustion Properties of 3,4‐Bis(3‐nitrofurazan‐4‐yl)furoxan (DNTF)

Thermal decomposition of melted 3,4‐bis(3‐nitrofurazan‐4‐yl)furoxan (DNTF) in isothermal conditions was studied. The burning rates of DNTF were measured in the pressure interval of 0.1–15 MPa. The thermal stability of DNTF was found to be close to the stability of HMX, while the burning rate of DNTF was close to the burning rate of CL‐20. The thermocouple measurements in the combustion wave of DNTF showed that combustion of DNTF was controlled by the gas‐phase mechanism. The DNTF vapor pressure was determined from thermocouple measurements and agreed well with data obtained at low temperatures under isothermal conditions.