Studies on chain transfer reaction in butadiene polymerization initiated with n‐butyl lithium and novel promoter potassium para‐methylphenoxide

The chain transfer reaction was examined in the anionic telomerization of butadiene with n‐BuLi as the initiator, potassium para‐methylphenoxide (ROK) as the novel promoter, mixed xylene as the transfer agent as well as a solvent in the presence of diglyme as the polar modifier. Effects of ROK, diglyme, and the polymerizing temperature were studied. It was demonstrated that they all promote the chain transfer reaction. The relative constant of chain transfer to the solvent was also calculated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1215–1218, 2005     

Anionic polymerization of 1,3‐cyclohexadiene: Addition of poly(1,3‐cyclohexadienyl)lithium to fullerene‐C60

The addition of poly(1,3‐cyclohexadiene) (PCHD) carbanion to fullerene‐C₆₀ (C₆₀) was examined using poly(1,3‐cyclohexadienyl)lithium (PCHDLi), PCHDLi/1,4‐diazabicyclo[2,2,2]octane (DABCO), and PCHDLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA). The reactivity of PCHD carbanions was in the order of PCHDLi > PCHDLi/DABCO > PCHDLi/TMEDA, regardless of the polymer main chain structure. PCHDLi, PCHDLi/DABCO, and PCHDLi/TMEDA in toluene formed σ‐structures, σ‐ and π‐structures, and π‐structures, respectively. The degree of localization on the terminal carbanion was a main factor for control of this addition reaction. In addition, all 1,2‐cyclohexadiene (1,2‐CHD) unit sequences contributed to preventing the addition reaction. That is, large steric hindrance of the polymer main chain was another important factor to control the addition reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Morphology of micron‐sized,monodisperse, nonspherical polystyrene/poly(n‐butyl methacrylate) composite particles produced by seeded dispersion polymerization

Nonspherical polystyrene (PS)/poly(n‐butyl methacrylate) (PBMA) composite particles with uneven surfaces were produced by seeded dispersion polymerization of BMA with 1.65‐μm, monodisperse, spherical PS seed particles. The composite particles consisted of a PS core and an incomplete PBMA shell. The formation mechanism of such nonspherical particles was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2013–2021, 2002     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Highly trans‐1,4‐specific polymerization of 1,3‐butadiene catalyzed by [2,6‐bis{(4S)‐ (−)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine] chromium complex activated with modified methylaluminoxane

Chromium complexes with N,N,N‐tridentate ligands, LCrCl₃ (L = 2,6‐bis{(4S)‐(?)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine ( 1 ), 2,2′:6′,2″‐terpyridine ( 2 ), and 4,4′,4″‐tri‐tert‐butyl‐2,2′:6′,2″‐terpyridine ( 3 )), were prepared. The structures of 1 and 2 were determined by X‐ray crystallography. Upon activation with modified methylaluminoxane (MMAO), 1 catalyzed the polymerization of 1,3‐butadiene, while 2 and 3 was inactive. The obtained poly(1,3‐butadiene) obtained with 1 ‐MMAO was found to have completely trans‐1,4 structure. The 1 ‐MMAO system also showed catalytic activity for the polymerization of isoprene to give polyisoprene with trans‐1,4 (68%) and cis‐1,4 (32%) structure. Copyright © 2011 Society of Chemical Industry     

Biodegradable poly(ester‐ether)s: ring‐opening polymerization of D,L‐3‐methyl‐1,4‐dioxan‐2‐one using various initiator systems

The synthesis and detailed characterization of racemic 3‐methyl‐1,4‐dioxan‐2‐one (3‐MeDX) are reported. The bulk ring‐opening polymerization of 3‐MeDX, to yield a poly(ester‐ether) meant for biomedical applications, in the presence of various initiators such as tin(II) octanoate, tin(II) octanoate/n‐butyl alcohol, aluminium tris‐isopropoxide and an aluminium Schiff base complex (HAPENAlOⁱPr) under varying experimental conditions is here detailed for the first time. Polymerization kinetics were investigated and compared with those of 1,4‐dioxan‐2‐one. The studies reveal that the rate of polymerization of 3‐MeDX is less than that of 1,4‐dioxan‐2‐one. Experimental conditions to achieve relatively high molar masses have been established. Thermodynamic parameters such as enthalpy and entropy of 3‐MeDX polymerization as well as ceiling temperature have been determined. Poly(D ,L ‐3‐MeDX) is found to possess a much lower ceiling temperature than poly(1,4‐dioxan‐2‐one). Poly(D ,L ‐3‐MeDX) was characterized using NMR spectroscopy, matrix‐assisted laser desorption ionization mass spectrometry, size exclusion chromatography and differential scanning calorimetry. This polymer is an amorphous material with a glass transition temperature of about ?20 °C. Copyright © 2010 Society of Chemical Industry     

The rapid,living, anionic polymerization of 2‐vinylnaphthalene at ambient temperature: Characterization of an n‐butyllithium/tetrahydrofuran system in 1,2,3,4‐tetrahydronaphthalene

We report the first well‐controlled room temperature anionic polymerization of 2‐vinylnaphthalene (2‐VNP), using alkyllithium (RLi) initiators. The nucleophilicity and solubility of the RLi as well as that of the 2‐vinylnaphthalenyllithium (VNPLi) and poly(2‐vinylnaphthalenyl)lithium (PVNPLi) propagating species were found to be very important factors in this reaction. An initiator system composed of n‐butyllithium (n‐BuLi) with tetrahydrofuran (THF) in 1,2,3,4‐tetrahydronaphthalene (THN) was determined to be the most effective of the various systems examined. The n‐BuLi/THF complex initiates polymerization and the resulting VNPLi/THF and PVNPLi/THF complexes act as propagating species at room temperature. These species offer adequate nucleophilicity and stability without promoting side reactions. As a result, rapid anionic polymerization was achieved. Various poly(2‐VNP) products with well‐defined polymeric chain structures were synthesized by this process at room temperature. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41901.     

Structure,mechanical, and thermal behavior of nylon 6‐polyisoprene block copolymers obtained via anionic polymerization

The structure and physicomechanical properties of nylon 6 (N‐6) modified with polyethylene oxide–polyisoprene–polyethylene oxide (PEO‐PI‐PEO) copolymers via activated anionic polymerization have been investigated by using differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), thermogravimetric analysis (TGA), dynamic mechanical analysis (DTMA), and by optical microscopy. This study deals with the influence that the N‐6/PI ratio and the length of the PI segments have on the physicomechanical behavior, thermal stability, and the structural changes of the block copolymers. Literature does not report on previous investigations of this kind. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3251–3258, 2004     

Morphological,thermal, and mechanical properties of poly(ε‐caprolactone)/poly(ε‐caprolactone)‐grafted‐cellulose nanocrystals mats produced by electrospinning

Electrospun nanocomposites of poly(ε‐caprolactone) (PCL) incorporated with PCL‐grafted cellulose nanocrystals (PCL‐g‐CNC) were produced. PCL chains were grafted from cellulose nanocrystals (CNC) surface by ring‐opening polymerization. Grafting was confirmed by infrared spectroscopy (FTIR) and thermogravimetric analyses (TGA). The resulting PCL‐g‐CNC were then incorporated into a PCL matrix at various loadings. Homogeneous nanofibers with average diameter decreasing with the addition of PCL‐g‐CNC were observed by scanning electron microscopy (SEM). PCL‐g‐CNC domains incorporated into the PCL matrix were visualized by transmission electron microscopy (TEM). Thermal and mechanical properties of the mats were analyzed by differential scanning calorimetry (DSC), TGA and dynamic mechanical analysis (DMA). The addition of PCL‐g‐CNC into the PCL matrix caused changes in the thermal behavior and crystallinity of the electrospun fibers. Significant improvements in Young's modulus and in strain at break with increasing PCL‐g‐CNC loadings were found. These results highlighted the great potential of cellulose nanocrystals as a reinforcement phase in electrospun PCL mats, which can be used as biomedical materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43445.     

Processability and characterization of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) prepared by living radical polymerization of vinyl chloride. Comparison with a flexible commercial resin formulation prepared with PVC and dioctyl phthalate

This work reports the synthesis and processing of a new flexible material based on PVC produced by living radical polymerization. The synthesis was carried out in a two‐step process. In the first step the macroinitiator α, ω‐di(iodo)poly(butyl acrylate) [α, ω‐di(iodo)PBA] was synthesized in water by single electron transfer/degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) catalyzed by Na₂S₂O₄. In the second step this macroinitiator was reinitiated by SET‐DTLRP of vinyl chloride (VC), thereby leading to the formation of the block copolymer poly(vinyl chloride)‐b‐poly(butyl acrylate)‐b‐poly(vinyl chloride) [PVC‐b‐PBA‐b‐PVC]. This new material was processed on a laboratory scale. The DMTA traces showed only a single glass transition temperature, thus indicating that no phase segregation was present. The copolymers were studied with regard to their processing, miscibility, and mechanical properties. The first comparison with commercial formulations made with PVC and dioctyl phthalate (DOP) is presented. J. VINYL ADDIT. TECHNOL., 12:156–165, 2006. © 2006 Society of Plastics Engineers     

Thermally crosslinked anionic hydrogels composed of poly(vinyl alcohol) and poly(γ‐glutamic acid): Preparation,characterization, and drug permeation behavior

pH‐sensitive anionic hydrogels composed of poly(vinyl alcohol) (PVA) and poly(γ‐glutamic acid) (γ‐PGA) were prepared by the freeze drying method and thermally crosslinked to suppress hydrogel deformation in water. The physical properties, swelling, and drug‐diffusion behaviors were characterized for the hydrogels. In the equilibrium swelling study, PVA/γ‐PGA hydrogels shrunk in pH regions below the pK_a (2.27) of γ‐PGA, whereas they swelled above the pK_a. In the drug‐diffusion study, the drug permeation rates of the PVA/γ‐PGA hydrogels were directly proportional to their swelling behaviors. The cytocompatibility test showed no cytotoxicity of the PVA/γ‐PGA hydrogels for the 3T3 fibroblast cell lines. The results of these studies suggest that hydrogels prepared from PVA and γ‐PGA could be used as orally administrable drug‐delivery systems. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect on adhesion of new polymerization initiator systems comprising 5‐monosubstituted barbituric acids,aromatic sulfinate amides,and tert‐butyl peroxymaleic acid in dental adhesive resin

To develop a multipurpose dental adhesive resin, the effects of polymerization initiator systems comprising 5‐monosubstituted barbituric acid (5‐MSBA), aromatic sulfinate amide (ASA), and tert‐butyl peroxymaleic acid (t‐BPMA) with 4‐acryloxyethyltrimellitic acid (4‐AET) or its anhydride (4‐AETA) on adhesion and curing time were investigated. Tensile bond strength values of a Ni Cr alloy are affected by the inclusion of t‐BPMA, and the optimum concentration of t‐BPMA in a 5‐MSBA–ASA–t‐BPMA‐type initiator system was found to be 0.5–2.0 wt %, and it was noteworthy that the correlation between the tensile bond strength and curing time on the t‐BPMA‐concentration showed a highly negative correlation of a benzenesulfinate morphoride (BSMo) series adhesive: r = −0.957, and a p‐toluenesulfinate morphoride (p‐TSMo) series adhesive: r = −0.949. The combination of 1‐cyclohexyl‐5‐ethylbarbiturioc acid (CEBA) with ASA provides a high level of tensile bond strength to the Ni Cr alloy, and the optimum concentration of CEBA in a CEBA–ASA–t‐BPMA‐type initiator and the bond strength values were found to be 0.75 wt % CEBA: 52.3 MPa (with BSMo), and 1.0 wt % CEBA: 50.9 MPa (with p‐TSMo), respectively. It was suggested that 5‐MSBA, ASA, and t‐BPMA and their combinations provided the environment where 4‐AETA exhibited good bonding performance with increasing wettability to metal without interference of a charge‐transfer complex derived from a polymerization initiator system such as benzoyl peroxide (BPO)–amine. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1655–1668, 1999     

Sequence distribution,thermal properties,and crystallization studies of poly(trimethylene terephthalate‐co‐1,4‐cyclohexylene dimethylene terephthalate) copolyesters

A series of novel poly(trimethylene terephthalate‐co‐1,4‐cyclohexylene dimethylene terephthalate) (PTCT) with various compositions were synthesized by melt polycondensation of 1,3‐propanediol, 1,4‐cyclohexanedimethanol and dimethyl terephthalate. The resulting copolyesters were characterized using ¹³C and ¹H nuclear magnetic resonance. The average length of both trimethylene terephthalate (TT) and cyclohexylene dimethylene terephthalate (CT) sequences varies from 1 to 10, and the chain structure is statistically random. The crystallization was investigated using wide angle X‐ray diffractometer (WAXD) and differential scanning calorimeter. The WAXD patterns can be divided in two groups according to the composition: copolyesters with less than 35 mol % CT content exhibit PTT‐type lattice, and those with CT unit content higher than 42 mol % crystallize with the PCT‐type lattice. The crystallizability of CT sequence is higher than that of TT sequence. Thermodynamic analysis shows that the comonomer is excluded from the PTT‐type or PCT‐type crystal of the copolyesters. The thermal decomposition temperature of copolyesters increases with increasing CT content, and their thermal stability is improved as compared to that of PTT. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(ε‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) amphiphilic copolymers prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization: Synthesis,self‐assembly,and thermoresponsive property

Thermoresponsive graft copolymers of ε‐caprolactone and N‐isopropylacrylamide were synthesized by a combination of ring‐opening polymerization and the sequential atom transfer radical polymerization (ATRP). The copolymer composition, chemical structure, and the self‐assembled structure were characterized. The graft length and density of the copolymers were well controlled by varying the feed ratio of monomer to initiator and the fraction of chlorides along PCL backbone, which is acting as the macroinitiator for ATRP. In aqueous solution, PCL‐g‐PNIPAAm can assemble into the spherical micelles which comprise of the biodegradable hydrophobic PCL core and thermoresponsive hydrophilic PNIPAAm corona. The critical micelle concentrations of PCL‐g‐PNIPAAm were determined under the range of 6.4–23.4 mg/L, which increases with the PNIPAAm content increasing. The mean hydrodynamic diameters of PCL‐g‐PNIPAAm micelles depend strongly on the graft length and density of the PNIPAAm segment, allowing to tune the particle size within a wide range. Additionally, the PCL‐g‐PNIPAAm micelles exhibit thermosensitive properties and aggregate when the temperature is above the lower critical solution temperature. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41115.     

Synthesis,characterization and thermal properties of functionalized poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing ethylenic,aldehydic, hydroxyl and acrylate pendant groups

New functionalized poly(2,6‐dimethyl‐1,4‐phenylene oxide)s (PPOs) containing ethylenic, aldehydic, hydroxyl and acrylate pendant groups were synthesized and their structure, properties and curing kinetics were investigated. The incorporation of polar functional groups resulted in an improvement in the glass transition temperature in the order aldehydic PPO > acrylate PPO > hydroxyl PPO > vinyl PPO > brominated PPO > pristine PPO. Upon thermal curing, the electron‐donating substituent in the vinyl PPO resulted in an increase in the activation energy in the order –Pr, –Bu > –Ph > –H, whereas the electron‐withdrawing substituent in the acrylate PPO caused a slight decrease in the activation energy. Copyright © 2011 Society of Chemical Industry     

Morphology,thermal, and crystallization properties of poly(butylene succinate)‐grafted Nanocrystalline Cellulose by polymerization in situ

The compounds 1,4‐butanediol, succinic anhydride, and nanocellulose (NCC) were used to synthesize poly(butylene succinate)‐grafted Nanocrystalline Cellulose (PBS‐g‐NCC) nanocomposites via polymerization in situ. The resulting structures were examined by transmission electron microscopic (TEM), scanning electron microscope (SEM), ¹H and ¹³C‐nuclear magnetic resonance spectroscopic (NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD) analyses. TEM showed the cellulose to be nanoscale and SEM analysis indicated that 3 wt% NCC dispersed well in PBS matrix. ¹H and ¹³C‐NMR analyses indicated the product to possess peaks characteristic of PBS. DSC analysis clearly showed that the NCC increased the PBS crystallinity when 3 wt% NCC was introduced into PBS matrixes by polymerization in situ, compared to pure PBS. TGA illustrated that the thermal stability of PBS‐g‐NCC was better than that of pure PBS, when 3 wt% NCC was added. XRD analysis suggested that 3 wt% NCC improved PBS crystallinity, which was in good agreement with the present DSC results. POLYM. ENG. SCI., 59:928–934, 2019. © 2018 Society of Plastics Engineers     

Percolation network formation in poly(4‐vinylpyridine)/aluminum nitride nanocomposites: Rheological,dielectric, and thermal investigations

This work is concerned with several issues related to the rheological behavior of poly(4‐vinylpyridine)/aluminum nitride (AlN) nanocomposites. The composites are prepared by solution processing combined with ultrasonication and magnetic stirring. To understand the percolated structure, the nanocomposites are characterized via a set of rheological, dielectric, and thermal conductivity analyses. The nanoparticle networks are sensitive to the steady shear deformation particularly at low shear rates, where a shear‐thinning domain is observed. The rheological measurements revealed also that the activation energy is significantly lower at high nanofiller loadings suggesting stronger AlN interactions. The changes in the terminal behavior of shear moduli are the result of variations in composite elasticity determined by the percolation network. The flocculation and percolation thresholds estimated from the rheological moduli dependence on AlN loading are correlated with the dielectric constant values. Thermal conductivity is determined from a new theoretical model involving, besides the contribution of each phase, both percolation processes and the shape of the nanofiller. POLYM. COMPOS., 35:1543–1552, 2014. © 2013 Society of Plastics Engineers     

Novel method to prepare charged mosaic membrane by using dipole‐like microspheres. I. Preparation and characterization of poly(4‐vinylpyridine/n‐butyl acrylate) seed latex with high solid content by soap‐free emulsion polymerization

The stable latex of poly(4‐vinylpyridine‐co‐n‐butyl acrylate) (P4VP/nBA) with a solid content as high as 10 wt % was prepared by a modified soap‐free emulsion polymerization. A mixture of water and organic solvents was employed as the continuous phase for increasing the solid content of the latex. Several organic solvents were investigated and, among them, ethyl acetate (EA) and diethyl ether (DE) were effective. The stable latex with 10 wt % solid content was prepared by charging 10 wt % EA or a EA/DE mixture (5 wt % each); however, more than 10 wt % solid content of the stable latex could not be obtained even by charging more than 10 wt % EA or a EA/DE mixture. The stable latex with 10 wt % solid content, which was crosslinked with less than 0.5 wt % (based on monomer) of ethylene glycol dimethacrylate, was prepared by charging 10 wt % of EA. In this case, however, the pH of the continuous phase had to be adjusted to lower than 4. The effects of EA on the characteristics of the resulting uncrosslinked latex were investigated by employing ζ‐potential measurements and scanning electron microscopy. It was found that the mass of coagulum decreased as the EA increased. At 8 wt % of EA, a stable latex of 10 wt % solid content without any coagulum was obtained. The ζ potential of particles increased from −100 up to 45.7 mV as the EA increased from 0 to 10 wt %. The effects of batch and semicontinuous copolymerization on the morphology of the microspheres were investigated by using DSC and ultrathin cross‐sectional transmission electron miscroscopy photos. A core–shell structure was not found, despite the batch copolymerization of 4VP(1)/nBA(2) (r₁ = 4.3, r₂ = 0.23), even with disparate reactivity ratios. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1731–1740, 2000     

Poly(ethylene terephthalate)/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate)/clay nanocomposites: Mechanical properties,optical transparency,and barrier properties

Poly(ethylene terephthalate) (PET)/clay, PET/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate) (PETG), and PET/PETG/clay nanocomposites were fabricated using the twin‐screw extrusion technique. The spherulitic morphologies, thermomechanical, mechanical, and gas‐barrier properties, as well as the effect of clay on the transparency of the resulting nanocomposites were identified. The clay induced the heterogeneous nucleation of the nanocomposites during the cold crystallization process, thereby increasing the crystallinities and melting temperatures of the resulting nanocomposites. The incorporation of clay increased the storage moduli, Young's moduli, impact strengths, and barrier properties of the PET, PETG, and PET/PETG blend. Regarding the optical transparency, the inclusion of clay can make the crystallizable PET matrix crystalline opaque. However, the amorphous PETG maintained its transparency. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39869.