Linear low‐density polyethylene/(soya powder) blends containing polyethylene‐g‐(maleic anhydride) as a compatibilizer

Blends were made from linear low‐density polyethylene (LLDPE) and various amounts of soya powder. The soya powder content was varied from 5 to 20 wt%. Polyethylene‐g‐(maleic anhydride) (PE‐g‐MA) was used as a compatibilizer. Tensile strength and elongation at break (EB) decreased with increasing soya powder content. However, Young's modulus increased with the incorporation of soya powder. The addition of PE‐g‐MA as a compatibilizer increased the tensile strength, EB, and modulus of the blends. The interfacial adhesion between soya powder and LLDPE was improved by the incorporation of PE‐g‐MA, as demonstrated by scanning electron microscopy. Increasing the content of soya powder reduced the crystallinity of the LLDPE phase. The addition of PE‐g‐MA had no significant effect on melting temperature, but the degree of crystallinity of the LLDPE was increased. The thermal stability of the blends was determined by using thermogravimetric analysis. Thermal stability decreased with increasing soya powder loading. However, the addition of PE‐g‐MA slightly increased the thermal stability of LLDPE/(soya powder) blends. J. VINYL ADDIT. TECHNOL., 2009. © 2009 Society of Plastics Engineers     

Gasoline permeation behavior and mechanical properties of polyamide 6/nanoclay,polyamide 6/PE‐g‐maleic anhydride blend,and polyamide 6/PE‐g‐maleic anhydride/clay nanocomposite

In this article, polyamide 6 (PA6)/clay nanocomposites, PA6/polyethylene grafted maleic anhydride (PE‐g‐MA) blends, and PA6/PE‐g‐MA/clay nanocomposites were prepared and their gasoline permeation behavior and some mechanical properties were investigated. In PA6/clay nanocomposites, cloisite 30B was used as nanoparticles, with weight percentages of 1, 3, and 5. The blends of PA6/PE‐g‐MA were prepared with PE‐g‐MA weight percents of 10, 20, and 30. All samples were prepared via melt mixing technique using a twin screw extruder. The results showed that the lowest gasoline permeation occurred when using 3 wt % of nanoclay in PA6/clay nanocomposites, and 10 wt % of PE‐g‐MA in PA6/PE‐g‐MA blends. Therefore, a sample of PA6/PE‐g‐MA/clay nanocomposite containing 3 wt % of nanoclay and 10 wt % of PE‐g‐MA was prepared and its gasoline permeation behavior was investigated. The results showed that the permeation amount of PA6/PE‐g‐MA/nanoclay was 0.41 g m^?2 day^?1, while this value was 0.46 g m^?2 day^?1 for both of PA6/3wt % clay nanocomposite and PA6/10 wt % PE‐g‐MA blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40150.     

Polyethylene grafted maleic anhydride to improve wettability of liquid on polyethylene films

Blends of linear low density polyethylene (LLDPE) and LLDPE grafted maleic anhydride (LLDPE‐g‐MA) were prepared by melt mixing. The surface of cast films with different contents and types of maleated PE were characterized through contact angle and wetting tension measurements, as well as attenuated total reflection IR spectroscopy. The tensile properties and light transmission of extruded films, as well as the performance of these films compared with commercial “antifog” films, for greenhouses were determined. The carbonyl polar groups on the surface of LLDPE/LLDPE‐g‐MA blends increased, and the equilibrium contact angles of water and dimethylformamide decreased when the content of maleated PE increased. Films made with these blends showed a noticeable reduction in water drop formation as the MA content was increased and when using LLDPE‐g‐MA of lower molecular weight. The light transmission through these films under condensation was improved when using increased contents of MA, which promotes better wetting of the water on the surface. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1802–1808, 2001     

Toughening of polyamide 6 with a maleic anhydride functionalized acrylonitrile–butadiene–styrene copolymer

Maleic anhydride functionalized acrylonitrile–butadiene–styrene (ABS‐g‐MA) copolymers were prepared via an emulsion polymerization process. The ABS‐g‐MA copolymers were used to toughen polyamide 6 (PA‐6). Fourier transform infrared results show that the maleic anhydride (MA) grafted onto the polybutadiene phase of acrylonitrile–butadiene–styrene (ABS). Rheological testing identified chemical reactions between PA‐6 and ABS‐g‐MA. Transmission electron microscopy and scanning electron microscopy displayed the compatibilization reactions between MA of ABS‐g‐MA and the amine and/or amide groups of PA‐6 chain ends, which improved the disperse morphology of the ABS‐g‐MA copolymers in the PA‐6 matrix. The blends compatibilized with ABS‐g‐MA exhibited notched impact strengths of more than 900 J/m. A 1 wt % concentration of MA in ABS‐g‐MA appeared sufficient to improve the impact properties and decreased the brittle–ductile transition temperature from 50 to 10°C. Scanning electron microscopy results show that the shear yielding of the PA‐6 matrix was the major toughening mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study on the microstructures and mechanical behaviour of compatibilized polypropylene/polyamide‐6 blends

A series of blends of polypropylene (PP)–polyamide‐6 (PA6) with either reactive polyethylene–octene elastomer (POE) grafted with maleic anhydride (POE‐g‐MA) or with maleated PP (PP‐g‐MA) as compatibilizers were prepared. The microstructures and mechanical properties of the blends were investigated by means of tensile and impact testing and by scanning electron microscopy and transmission electron microscopy. The results indicated that the miscibility of PP–PA6 blends was improved with the addition of POE‐g‐MA and PP‐g‐MA. For the PP/PA6/POE‐g‐MA system, an elastic interfacial POE layer was formed around PA6 particles and the dispersed POE phases were also observed in the PP matrix. Its Izod impact strength was four times that of pure PP matrix, whilst the tensile strength and Young's modulus were almost unchanged. The greatest tensile strength was obtained for PP/PA6/PP‐g‐MA blend, but its Izod impact strength was reduced in comparison with the pure PP matrix. © 2002 Society of Chemical Industry     

Rice straw fiber reinforced high density polyethylene composite: Effect of coupled compatibilizating and toughening treatment

In this study, rice‐straw (RS) filled high density polyethylene (HDPE) composites were manufactured by extrusion and injection molding. Three compatibilizers, which are unfunctionalized ethylene/propylene copolymer (uEPR), maleic anhydride grafted EPR (EPR‐g‐MA) and PE‐g‐MA, and their combinations were introduced to strengthen fiber‐matrix interphase. The mechanical and morphological properties of composites were investigated. For single‐compatibilizer system, PE‐g‐MA or EPR‐g‐MA alone enhanced tensile, flexural, and impact strengths of resultant composites compared with HDPE/RS system without compatibilizers. Different toughening origins of individual compatibilizer were discussed based on composites' interphase morphologies and mechanical properties. For combined‐compatibilizers system, the PE‐g‐MA/EPR weight ratio is important for several properties of composites. The optimum ratio was considered as 2 : 1 and 1 : 1 for PE‐g‐MA/uEPR and PE‐g‐MA/EPR‐g‐MA modified composites, respectively. Also, composites modified by combined PE‐g‐MA/EPR‐g‐MA showed better impact strength than that modified by PE‐g‐MA alone. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of different compatibilizers on the rheological,thermomechanical, and morphological properties of HDPE/LLDPE blend‐based nanocomposites

The influence of two different compatibilizers and their combination (maleic anhydride grafted high density polyethylene, HDPE‐g‐MA; maleic anhydride grafted linear low density polyethylene, LLDPE‐g‐MA; and 50/50 wt % mixture of these compatibilizers) on the rheological, thermomechanical, and morphological properties of HDPE/LLDPE/organoclay blend‐based nanocomposites was evaluated. Nanocomposites were obtained by melt‐intercalation in a torque rheometer in two steps. Masterbatches (compatibilizer/nanoclay 2:1) were obtained and subsequently diluted in the HDPE/LLDPE matrix producing nanocomposites with 2.5 wt % of nanoclay. Wide angle X‐ray diffraction (WAXD), steady‐state rheological properties, and transmission electron microscopy (TEM) were used to determine the influence of different compatibilizer systems on intercalation and/or exfoliation process which occurs preferentially in the amorphous phase, and thermomechanical properties. The LLDPE‐g‐MA with a high melt index (and consequently low viscosity and crystallinity) was an effective compatibilizer for this system. Furthermore, the compatibilized nanocomposites with LLDPE‐g‐MA or mixture of HDPE‐g‐MA and LLDPE‐g‐MA exhibited better nanoclay's dispersion and distribution with stronger interactions between the matrix and the nanoclay. These results indicated that the addition of maleic anhydride grafted polyethylene facilitates both, the exfoliation and/or intercalation of the clays and its adhesion to HDPE/LLDPE blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1726–1735, 2013     

Effect of core‐shell morphology evolution on the rheology,crystallization, and mechanical properties of PA6/EPDM‐g‐MA/HDPE ternary blend

In this article, polyamide 6 (PA6), maleic anhydride grafted ethylene‐propylene‐diene monomer (EPDM‐g‐MA), high‐density polyethylene (HDPE) were simultaneously added into an internal mixer to melt‐mixing for different periods. The relationship between morphology and rheological behaviors, crystallization, mechanical properties of PA6/EPDM‐g‐MA/HDPE blends were studied. The phase morphology observation revealed that PA6/EPDM‐g‐MA/HDPE (70/15/15 wt %) blend is constituted from PA6 matrix in which is dispersed core‐shell droplets of HDPE core encapsulated by EPDM‐g‐MA phase and indicated that the mixing time played a crucial role on the evolution of the core‐shell morphology. Rheological measurement manifested that the complex viscosity and storage modulus of ternary blends were notable higher than the pure polymer blends and binary blends which ascribed different phase morphology. Moreover, the maximum notched impact strength of PA6/EPDM‐g‐MA/HDPE blend was 80.7 KJ/m² and this value was 10–11 times higher than that of pure PA6. Particularly, differential scanning calorimetry results indicated that the bulk crystallization temperature of HDPE (114.6°C) was partly weakened and a new crystallization peak appeared at a lower temperature of around 102.2°C as a result of co‐crystal of HDPE and EPDM‐g‐MA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Toughening and compatibilization of polypropylene/polyamide‐6 blends with a maleated–grafted ethylene‐co‐vinyl acetate

In this article, maleated–grafted ethylene‐co‐vinyl acetate (EVA‐g‐MA) was used as the interfacial modifier for polypropylene/polyamide‐6 (PP/PA6) blends, and effects of its concentration on the mechanical properties and the morphology of blends were investigated. It was found that the addition of EVA‐g‐MA improved the compatibility between PP and PA6 and resulted in a finer dispersion of dispersed PA6 phase. In comparison with uncompatibilized PP/PA6 blend, a significant reduction in the size of dispersed PA6 domain was observed. Toluene‐etched micrographs confirmed the formation of interfacial copolymers. Mechanical measurement revealed that the addition of EVA‐g‐MA markedly improved the impact toughness of PP/PA6 blend. Fractograph micrographs revealed that matrix shear yielding began to occur when EVA‐g‐MA concentration was increased upto 18 wt %. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3300–3307, 2006     

Effects of fiber composition and graft‐copoly(ethylene/maleic anhydride) on thermoplastic natural rubber composites reinforced by aramid fiber

Thermoplastic natural rubber (TPNR) composites of natural rubber and high‐density polyethylene at a ratio of 70/30 were prepared by melt blending with aramid fibers using an internal mixer. The fiber loadings were varied from 0 to 30% for systems with and without graft‐copoly(ethylene/maleic anhydride) (PE‐g‐MA) as a compatibilizer to study the variation of mechanical and dynamic mechanical properties. The tensile strength, modulus, hardness, and storage modulus improved with fiber loadings for both systems. The interaction between the matrix and fiber had also improved with the addition of PE‐g‐MA. Nevertheless, different behavior was observed in tan δ peak. The tan δ peak decreased with the increment of Twaron composition in the system with PE‐g‐MA and increased in the system without PE‐g‐MA. The results showed the importance of PE‐g‐MA in the system in improving the mechanical properties of Twaron–TPNR composite. POLYM. COMPOS., 27:395–401, 2006. © 2006 Society of Plastics Engineers     

Effects of glycerol and PE‐g‐MA on morphology,thermal and tensile properties of LDPE and rice starch blends

The effects of glycerol and polyethylene‐grafted maleic anhydride (PE‐g‐MA) on the morphology, thermal properties, and tensile properties of low‐density polyethylene (LDPE) and rice starch blends were studied by scanning electron microscopy (SEM), differential scanning calorimetry, and the Instron Universal Testing Machine, respectively. Blends of LDPE/rice starch, LDPE/rice starch/glycerol, and LDPE/rice starch/glycerol/PE‐g‐MA with different starch contents were prepared by using a laboratory scale twin‐screw extruder. The distribution of rice starch in LDPE matrix became homogenous after the addition of glycerol. The interfacial adhesion between rice starch and LDPE was improved by the addition of PE‐g‐MA as demonstrated by SEM. The crystallization temperatures of LDPE/rice starch/glycerol blends and LDPE/rice starch/glycerol/PE‐g‐MA blends were similar to that of pure LDPE but higher than that of LDPE/rice starch blends. Both the tensile strength and the elongation at break followed the order of rice starch/LDPE/glycerol/PE‐g‐MA blends > rice starch/LDPE/glycerol > LDPE/rice starch blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 344–350, 2004     

Relationship between structure and properties in high‐performance PA6/SEBS‐g‐MA/(PPO/PS) blends: The role of PPO and PS

This work aimed at studying the role of poly(phenylene oxide) (PPO) and polystyrene (PS) in toughening polyamide‐6 (PA6)/styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (SEBS‐g‐MA) blends. The effects of weight ratio and content of PPO/PS on the morphology and mechanical behaviors of PA6/SEBS‐g‐MA/(PPO/PS) blends were studied by scanning electron microscope and mechanical tests. Driving by the interfacial tension and the spreading coefficient, the “core–shell” particles formed by PPO/PS (core) and SEBS‐g‐MA (shell) played the key role in toughening the PA6 blends. As PS improved the distribution of the “core–shell” particles due to its low viscosity, and PPO guaranteed the entanglement density of the PPO/PS phase, the 3/1 weight ratio of PPO/PS supplied the blends optimal mechanical properties. Within certain range, the increased content of PPO/PS could supply more efficient toughening particles and bring better mechanical properties. Thus, by adjusting the weight ratio and content of PPO and PS, the PA6/SEBS‐g‐MA/(PPO/PS) blends with excellent impact strength, high tensile strength, and good heat deflection temperature were obtained. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45281.     

Preparation of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber

Dynamically vulcanized thermoplastic elastomers nanocomposites (TPV nanocomposites) based on linear low density polyethylene (LLDPE)/reclaimed rubber/organoclay were prepared via one‐step melt blending process. Maleic anhydride grafted polyethylene (PE‐g‐MA) was used as a compatibilizing agent. The effects of reclaimed rubber content (10, 30, and 50 wt %), nanoclay content (3, 5, and 7 wt %), and PE‐g‐MA on the microstructure, thermal behavior, mechanical properties, and rheological behavior of the nanocomposites were studied. The TPV nanocomposites were characterized by X‐ray diffraction, transmission electron microscopy, scanning electron microscopy (SEM), differential scanning calorimeter, mechanical properties, and rheometry in small amplitude oscillatory shear. SEM photomicrographs of the etched samples showed that the elastomer particles were dispersed homogeneously throughout the polyethylene matrix and the size of rubber particles was reduced with introduction of the organoclay particles and compatibilizer. The effects of different nanoclay contents, different rubber contents, and compatibilizer on mechanical properties were investigated. Increasing the amount of nanoclay content and adding the compatibilizer result in an improvement of the tensile modulus of the TPV nanocomposite samples. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Toughening of polylactide by melt blending with linear low‐density polyethylene

Melt blending of polylactide and linear low‐density polyethylene (LLDPE) was performed in an effort to toughen polylactide. In addition, two model polylactide‐polyethylene (PLLA‐PE) block copolymers were investigated as compatibilizers. The LLDPE particle size and the impact resistance of binary and ternary blends were measured to determine the extent of compatibilization. For the amorphous polylactide (PLA), toughening was achieved only when a PLLA‐PE block copolymer was used as a compatibilizer. For the semicrystalline polylactide (PLLA), toughening was achieved in the absence of block copolymer. To decrease the variability in the impact resistance of the PLLA/LLDPE binary blend, as little as 0.5 wt % of a PLLA–;PE block copolymer was effective. The differences that were seen between the PLA and PLLA binary blends were investigated with adhesion testing. The semicrystalline PLLA did show significantly better adhesion to the LLDPE. We propose that tacticty effects on the entanglement molecular weight or miscibility of polylactide allow for the improved adhesion between the PLLA and LLDPE. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3757–3768, 2003     

Effect of Al2O3 fibers on the thermal conductivity and mechanical properties of high density polyethylene with the absence and presence of compatibilizer

Alumina (Al₂O₃) fiber/high density polyethylene (HDPE) composites were prepared by molding injection with or without compatibilizer, in which, maleic anhydride‐grafted polyethylene (PE‐g‐MA) and acrylic acid‐grafted polyethylene (PE‐g‐AA) were used as the compatibilizers. The thermal conductivities of the composites were anisotropic and the conductivities in the injection direction of the samples were higher than those in perpendicular direction of the injection. The anisotropic thermal conductivity for Al₂O₃/PE‐g‐AA/HDPE was the most obvious and this composite also gave the best mechanical performance. The SEM and DMA test revealed that PE‐g‐AA was more effective than PE‐g‐MA in improving the matrix–filler interaction. The high interfacial interaction was more favorable for the viscous flow‐induced fiber orientation, which resulted in the largest anisotropic degree of thermal conductivity of the Al₂O₃/PE‐g‐AA/HDPE among the studied composite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyamide 6/maleated ethylene–propylene–diene rubber/organoclay composites with or without glycidyl methacrylate as a compatibilizer

Polyamide 6 (PA6)/maleated ethylene–propylene–diene rubber (EPDM‐g‐MA)/organoclay (OMMT) composites were melt‐compounded through two blending sequences. Glycidyl methacrylate (GMA) was used as a compatibilizer for the ternary composites. The composite prepared through via the premixing of PA6 with OMMT and then further melt blending with EPDM‐g‐MA exhibited higher impact strength than the composite prepared through the simultaneous blending of all the components. However, satisfactorily balanced mechanical properties could be achieved by the addition of GMA through a one‐step blending sequence. The addition of GMA improved the compatibility between PA6 and EPDM‐g‐MA, and this was due to the reactions between PA6, EPDM‐g‐MA, and GMA, as proved by Fourier transform infrared analysis and solubility (Molau) testing. In addition, OMMT acted as a compatibilizer for PA6/EPDM‐g‐MA blends at low contents, but it weakened the interfacial interactions between PA6 and EPDM‐g‐MA at high contents. Both OMMT and GMA retarded the crystallization of PA6. The complex viscosity, storage modulus, and loss modulus of the composites were obviously affected by the addition of OMMT and GMA. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Investigation on morphology and mechanical properties of polyamide 6/maleated ethylene‐propylene‐diene rubber/organoclay composites

Maleated ethylene‐propylene‐diene rubber (EPDM‐g‐MA) toughened polyamide 6 (PA6)/organoclay (OMMT) nanocomposites were prepared by melt blending. The role of OMMT in the morphology of the ternary composites and the relationship between the morphology and mechanical properties were investigated by varying the blending sequence. The PA6/EPDM‐g‐MA/OMMT (80/20/4) composites prepared by four different blending sequences presented distinct morphology and mechanical properties. The addition of OMMT could obviously decrease viscosity of the matrix and weaken the interfacial interactions between PA6 and EPDM‐g‐MA when blending EPDM‐g‐MA with a premixed PA6/OMMT nacocomposite, resulting in the increase of rubber particle size. The final mechanical properties are not only determined by the location of OMMT, but also by the interfacial adhesion between PA6 and EPDM‐g‐MA. Having maximum percentage of OMMT platelets in the PA6 matrix and keeping good interfacial adhesion between PA6 and EPDM‐g‐MA are beneficial to impact strength. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Creep analysis of bamboo high‐density polyethylene composites: Effect of interfacial treatment and fiber loading level

The effect of chemical treatment at fiber–plastic interface and fiber loading level on creep property of bamboo fiber high‐density polyethylene (BF/HDPE) composites was investigated. For single modifier systems, the use of maleic anhydride grafted polyethylene (PE‐g‐MA) as a coupling agent helped reduce the creep and achieved the optimum effect at the 5.7% loading level. The addition of either a semicrystalline or an amorphous MA grafted ethylene propylene rubber (sEPR‐g‐MA or aEPR‐g‐MA) as an impact modifier increased the creep. For the combined modifiers, the use of PE‐g‐MA in EPR‐g‐MA modified composites gradually improved creep performance. Four‐element Burgers model was shown to fit measured creep data well only within the specified test period. However, both partially stretched Burgers (PSB) model and fully stretched Burgers (FSB) model could be applied for characterization and prediction when the stretching exponent was fixed at certain given values. The FSB model offered a better long‐term prediction based on the short‐term creep data. Time‐temperature superposition technique produced smooth master creep curves through horizontal shifts, but it slightly over‐predicted the long‐term creep for most composite systems. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Effect of blending sequence on the morphology and properties of polyamide 6/EPDM‐g‐MA/epoxy blends

The ternary blends of polyamide 6/maleated ethylene‐propylene‐diene rubber/epoxy (PA6/EPDM‐g‐MA/EP) were prepared by a twin‐screw extruder with four different blending sequences. With the variation of blending sequence, the ternary blends presented distinct morphology and mechanical properties because of different interactions induced by various reactive orders. The addition of epoxy could increase the viscosity of the PA6 matrix, but a considerably larger size of the dispersed rubber phase was observed while first preblending PA6 with epoxy followed by blending a premix of PA6/EP with EDPM‐g‐MA, which was attested by rheological behaviors and SEM observations. It was probably ascribed to the fact that the great increase of the interfacial tension between the matrix and rubber phase aroused a great coalescence of rubber particles. The presence of epoxy in the rubber phase reduced the rubber's ability to cavitate so that the toughening efficiency of the EPDM‐g‐MA was decreased. The results of mechanical testing revealed that the optimum blending sequence to achieve balanced mechanical properties is blending PA6, EPDM‐g‐MA, and epoxy simultaneously in which the detrimental reactions might be effectively suppressed. In addition, thermal properties were investigated by TG and DSC, and the results showed that there was no distinct difference. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of perfluoroalkylmethacrylate ester‐grafted‐linear low‐density polyethylene on the tribological property of polyoxymethylene–linear low‐density polyethylene composites

In this work, perfluoroalkylmethacrylate ester (PFAMAE)‐grafted‐linear low‐density polyethylene (LLDPE) was synthesized by UV‐induced surface graft polymerization. The effect of PFAMAE‐grafted‐LLDPE on the tribological behavior of LLDPE‐filled polyoxymethylene (POM) composite was investigated using a friction and abrasion testing machine. The results showed that LLDPE‐g‐PFAMAE was a more effective modifier in improving tribological property of LLDPE‐filled POM composite than conventional maleic anhydride‐grafted‐polyethylene (PE‐g‐MAH). POM/LLDPE composite possessed much lower friction coefficient but higher wear rate than pristine POM. The incorporation of LLDPE‐g‐PFAMAE into POM/LLDPE further decreased the friction coefficient, which was 45% lower than that of POM. The wear rate of POM/LLDPE/LLDPE‐g‐PFAMAE composite was also reduced and was lower than that of pristine POM. The primary wear mechanisms of POM/LLDPE composite with and without LLDPE‐g‐PFAMAE were adhesive and abrasive wear. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers