Technico-economic analysis of off grid solar PV/Fuel cell energy system for residential community in desert region

A technico-economic analysis based on integrated modeling, simulation, and optimization approach is used in this study to design an off grid hybrid solar PV/Fuel Cell power system. The main objective is to optimize the design and develop dispatch control strategies of the standalone hybrid renewable power system to meet the desired electric load of a residential community located in a desert region. The effects of temperature and dust accumulation on the solar PV panels on the design and performance of the hybrid power system in a desert region is investigated. The goal of the proposed off-grid hybrid renewable energy system is to increase the penetration of renewable energy in the energy mix, reduce the greenhouse gas emissions from fossil fuel combustion, and lower the cost of energy from the power systems. Simulation, modeling, optimization and dispatch control strategies were used in this study to determine the performance and the cost of the proposed hybrid renewable power system. The simulation results show that the distributed power generation using solar PV and Fuel Cell energy systems integrated with an electrolyzer for hydrogen production and using cycle charging dispatch control strategy (the fuel cell will operate to meet the AC primary load and the surplus of electrical power is used to run the electrolyzer) offers the best performance. The hybrid power system was designed to meet the energy demand of 4500 kWh/day of the residential community (150 houses). The total power production from the distributed hybrid energy system was 52% from the solar PV, and 48% from the fuel cell. From the total electricity generated from the photovoltaic hydrogen fuel cell hybrid system, 80.70% is used to meet all the AC load of the residential community with negligible unmet AC primary load (0.08%), 14.08% is the input DC power for the electrolyzer for hydrogen production, 3.30% are the losses in the DC/AC inverter, and 1.84% is the excess power (dumped energy). The proposed off-grid hybrid renewable power system has 40.2% renewable fraction, is economically viable with a levelized cost of energy of 145 $/MWh and is environmentally friendly (zero carbon dioxide emissions during the electricity generation from the solar PV and Fuel Cell hybrid power system).     

Dynamic modeling of a photovoltaic hydrogen fuel cell hybrid system

The objective of this paper is to mathematically model a stand-alone renewable power system, referred to as “Photovoltaic–Fuel Cell (PVFC) hybrid system”, which maximizes the use of a renewable energy source. It comprises a photovoltaic generator (PV), a water electrolyzer, a hydrogen tank, and a proton exchange membrane (PEM) fuel cell generator. A multi-domain simulation platform Simplorer is employed to model the PVFC hybrid systems. Electrical power from the PV generator meets the user loads when there is sufficient solar radiation. The excess power from the PV generator is then used for water electrolysis to produce hydrogen. The fuel cell generator works as a backup generator to supplement the load demands when the PV energy is deficient during a period of low solar radiation, which keeps the system's reliability at the same level as for the conventional system. Case studies using the present model have shown that the present hybrid system has successfully tracked the daily power consumption in a typical family. It also verifies the effectiveness of the proposed management approach for operation of a stand-alone hybrid system, which is essential for determining a control strategy to ensure efficient and reliable operation of each part of the hybrid system. The present model scheme can be helpful in the design and performance analysis of a complex hybrid-power system prior to practical realization.     

Hydrogen as a battery for a rooftop household solar power generation unit

Decentralization of electrical power generation using rooftop solar units is projected to develop to not only mitigate power losses along transmission and distribution lines, but to control greenhouse gases emissions. Due to intermittency of solar energy, traditional batteries are used to store energy. However, batteries have several drawbacks such as limited lifespan, low storage capacity, uncontrolled discharge when not connected to a load and limited number of charge/discharge cycles. In this paper, the feasibility of using hydrogen as a battery is analyzed where hydrogen is produced by the extra diurnal generated electricity by a rooftop household solar power generation unit and utilized in a fuel cell system to generate the required electrical power at night. In the proposed design, two rooftop concentrated photovoltaic thermal (CPVT) systems coupled with an organic Rankine cycle (ORC) are used to generate electricity during 9.5 h per day and the extra power is utilized in an electrolyzer to produce hydrogen. Various working fluids (Isobutane, R134a, R245fa and R123) are used in the ORC system to analyze the maximum feasible power generation by this section. Under the operating conditions, the generated power by ORC as well as its efficiency are evaluated for various working fluids and the most efficient working fluid is selected. The required power for the compressor in the hydrogen storage process is calculated and the number of electrolyzer cells required for the hydrogen production system is determined. The results indicate that the hybrid CPVT-ORC system produces 2.378 kW of electricity at 160 suns. Supplying 65% of the produced electricity to an electrolyzer, 0.2606 kg of hydrogen is produced and stored for nightly use in a fuel cell system. This amount of hydrogen can generate the required electrical power at night while the efficiency of electrolyzer is more than 70%.     

Automatic management of energy flows of a stand-alone renewable energy supply with hydrogen support

This work deals with the design and construction of an automation system for controlling the electric energy flows that take place at the continuous current bus (DC Bus) of a wind–solar system with hydrogen support. The automation system is based on a Siemens PLC s7_313C_2DP. This PLC was equipped with a Micro Memory Card (MMC) of 2 MB in order to allow the massive storage of data related to the control and monitoring of the test-bed. This system has to perform the required switching between the components of the hybrid electric energy generator. These elements are: photovoltaic generator, wind-turbine generator, fuel-cell system, and electrolyzer.     

Design and simulation of a solar-hydrogen system for different situations

In recent years, hybrid photovoltaic–fuel cell energy systems have been popular as energy production systems for different applications. A typical solar-hydrogen system can be modeled the electricity supplied by PV panels is used to meet the demand directly to the maximum extent possible. If there is any surplus PV power over demand, and capacity left in the tank for accommodating additional hydrogen, this surplus power is supplied to the electrolyser to produce hydrogen for storage. When the output of the PV array is not sufficient to supply the demand, the fuel cell draws on hydrogen from storage and produces electricity to meet the supply deficit.     

Experimental results for hybrid energy storage systems coupled to photovoltaic generation in residential applications

An experimental solar-hydrogen powered residence simulator was built and tested. The system consisted of a solar photovoltaic array connected to an electrolyzer which produced hydrogen as a means of energy storage. The hydrogen was used to produce electricity in a fuel cell that operated in parallel with a battery to meet dynamic power demand similar to that found in residential applications. The study demonstrated the technical feasibility of operating such a system under the simultaneous dynamics of solar input and load. Limitations of current fuel cell and electrolyzer designs, as they pertain to both power delivery and energy storage, were identified. The study also established the need to understand and address dynamic performance in the design and application of solar-hydrogen reversible fuel cell hybrid systems. An economic analysis found that major cost reductions would need to be achieved for such systems to compete with conventional energy storage devices.     

Technical and economical design of PV system and hydrogen storage including a sodium hypochlorite plant in a small community: Case of study of Paraguay

The increasing use of renewable power sources for distributed generation (DG) has made the application of storage systems a necessity to ensure the continuous supply. This paper analyzes technically and economically an autonomous sodium hypochlorite plant using a renewable energy source and a hydrogen storage system in the Western Region of Paraguay. In this region, there is abundant underground brackish water to produce industrial and energetic hydrogen. In addition, an isolated photovoltaic (PV) system feeds with electricity an electrolyzer, used for sodium hypochlorite production, and the brackish water and freshwater pumping systems. The hydrogen and fuel cell are used as backup system in the operation of the electrolyzer. Preliminary results show that hydrogen stored during the day can increase hypochlorite production by up to 31%. The PV solar system surplus can supply the demand of an off-grid community near the plant. The results show that the plant's return on investment (ROI) is 7 years.     

Size optimization of a hybrid photovoltaic/fuel cell grid connected power system including hydrogen storage

This paper describes the size optimization of a hybrid photovoltaic/fuel cell grid linked power system including hydrogen storage. The overall objective is the optimal sizing of a hybrid power system to satisfy the load demand of a university laboratory with an unreliable grid, with low energy cost and minimal carbon emissions. The aim is to shift from grid linked diesel power system to a clean and sustainable energy system. The optimum design architecture was established by adopting the energy-balance methods of HOMER (hybrid optimization model for electric renewables). Analysis of hourly simulations was performed to decide the optimal size, cost and performance of the hybrid system, using 22-years monthly averaged solar radiation data collected for Ambrose Alli University, Ekpoma (Lat. 6°44.3ʹN, Long. 6°4.8ʹE). The results showed that a hybrid system comprising 54.7 kW photovoltaic array, 7 kW fuel cell system, 14 kW power inverter and 3 kW electrolyzer with 8 kg hydrogen storage tank can sustainably augment the erratic grid with a very high renewable fraction of 96.7% at $0.0418/kWh. When compared with the conventional usage of grid/diesel generator system; energy cost saving of more than 88% and a return on investment of 41.3% with present worth of $308,965 can be derived in less than 3 years. The application of the optimally sized hybrid system would possibly help mitigate the rural-to-urban drift and resolve the electricity problems hindering the economic growth in Nigeria. Moreover, the hybrid system can alleviate CO₂ emissions from other power generation sources to make the environment cleaner and more eco-friendly.     

Model for energy conversion in renewable energy system with hydrogen storage

A dynamic model for a stand-alone renewable energy system with hydrogen storage (RESHS) is developed. In this system, surplus energy available from a photovoltaic array and a wind turbine generator is stored in the form of hydrogen, produced via an electrolyzer. When the energy production from the wind turbine and the photovoltaic array is not enough to meet the load demand, the stored hydrogen can then be converted by a fuel cell to produce electricity. In this system, batteries are used as energy buffers or for short time storage. To study the behavior of such a system, a complete model is developed by integrating individual sub-models of the fuel cell, the electrolyzer, the power conditioning units, the hydrogen storage system, and the batteries (used as an energy buffer). The sub-models are valid for transient and steady state analysis as a function of voltage, current, and temperature. A comparison between experimental measurements and simulation results is given. The model is useful for building effective algorithms for the management, control and optimization of stand-alone RESHSs.     

Generation of high-pressure hydrogen for fuel cell electric vehicles using photovoltaic-powered water electrolysis

Increasing the utilization of electric drive systems including hybrid, battery, and fuel cell electric vehicles (FCEV) will reduce the usage of petroleum and the emission of air pollution by vehicles. The eventual production of electricity and hydrogen in a renewable fashion, such as using solar energy, can achieve the long-term vision of having no tailpipe emissions, as well as eliminating the dependence of the transportation sector on dwindling supplies of petroleum for its energy. Before FCEVs can be introduced in large numbers, a hydrogen-fueling infrastructure is needed. This report describes an early proof-of-concept for a distributed hydrogen fueling option in which renewably generated, high-pressure hydrogen is dispensed at an FCEV owner’s home. In an earlier report we described the design and initial characterization of a solar photovoltaic (PV) powered electrolyzer/storage/dispensing (ESD) system that was a proof-of-concept for a single FCEV home fueling system. In the present report we determined the efficiency and other operational characteristics of that PV-ESD system during testing over a 109-day period at the GM Proving Ground in Milford, MI, at a hydrogen output pressure of approximately 2000 psi (13.8 MPa). The high pressure was achieved without any mechanical compression via electrolysis. Over the study period the photovoltaic solar to electrical efficiency averaged 13.7%, the electrolyzer efficiency averaged 59%, and the system solar to hydrogen efficiency averaged 8.2% based on the hydrogen lower heating value. A well-documented model used to evaluate solar photovoltaic power systems was used to calculate the maximum power point values of the voltage, current, and power of our PV system in order to derive the coupling factor between the PV and ESD systems and to determine its behavior over the range of environmental conditions experienced during the study. The average coupling factor was near unity, indicating that the two systems remained coupled in an optimal fashion. Also, the system operated well over a wide range of meteorological conditions, and in particular it responded quickly to instantaneous changes in the solar irradiance (caused by clouds) with negligible effect on the overall efficiency. During the study up to 0.67 kg of high-pressure hydrogen was generated on a sunny day for fueling FCEV. Future generations of high-pressure electrolyzers, properly combined with solar PV systems, can offer a compact, efficient, and environmentally acceptable system for FCEV home fueling.     

Optimal energy management system for stand-alone wind turbine/photovoltaic/hydrogen/battery hybrid system with supervisory control based on fuzzy logic

This paper presents a novel hourly energy management system (EMS) for a stand-alone hybrid renewable energy system (HRES). The HRES is composed of a wind turbine (WT) and photovoltaic (PV) solar panels as primary energy sources, and two energy storage systems (ESS), which are a hydrogen subsystem and a battery. The WT and PV panels are made to work at maximum power point, whereas the battery and the hydrogen subsystem, which is composed of fuel cell (FC), electrolyzer and hydrogen storage tank, act as support and storage system. The EMS uses a fuzzy logic control to satisfy the energy demanded by the load and maintain the state-of-charge (SOC) of the battery and the hydrogen tank level between certain target margins, while trying to optimize the utilization cost and lifetime of the ESS. Commercial available components and an expected life of the HRES of 25 years were considered in this study. Simulation results show that the proposed control meets the objectives established for the EMS of the HRES, and achieves a total cost saving of 13% over other simpler EMS based on control states presented in this paper.     

Design and analysis of a combined floating photovoltaic system for electricity and hydrogen production

The current study deals with a potential solution for the replacement of fossil fuel based energy resources with a sustainable solar energy resource. Electrical energy demand of a small community is investigated where a floating photovoltaic system and integrated hydrogen production unit are employed. Data are taken from Mumcular Dam located in Aegean Region of Turkey. PvSyst software is used for the simulation purposes. Furthermore, the obtained results are analyzed in the HOMER Pro Software. Photovoltaic (PV) electricity provides the required load and excess electricity to be used in the electrolyzer and to produce hydrogen. Saving lands by preventing their usage in conventional PV farms, saving the water due to reducing evaporation, and compensating the intermittent availability of solar energy are among the obtained results of the study for the considered scenario. Stored hydrogen is used to compensate the electric load through generating electricity by fuel cell. Floating PV (FPV) system decreases the water evaporation of water resources due to 3010 m² shading area. FPV and Hydrogen Systems provides %99.43 of the electricity demand without any grid connection or fossil fuel usage, where 60.30 MWh/year of 211.94 MWh/year produced electricity is consumed by electric load at $0.6124/kWh levelized cost of electricity (LCOE).     

Modeling,control and simulation of a photovoltaic /hydrogen/ supercapacitor hybrid power generation system for grid-connected applications

Hybrid renewable energy systems (HRES) should be designed appropriately with an adequate combination of different renewable sources and various energy storage methods to overcome the problem of intermittency of renewable energy resources. Focusing on the inevitable impact on the grid caused by strong randomicity and apparent intermittency of photovoltaic (PV) generation system, modeling and control strategy of pure green and grid-friendly hybrid power generation system based on hydrogen energy storage and supercapacitor (SC) is proposed in this paper. Aiming at smoothing grid-connected power fluctuations of PV and meeting load demand, the alkaline electrolyzer (AE) and proton exchange membrane fuel cell (PEMFC) and SC are connected to DC bus of photovoltaic grid-connected generation system. Through coordinated control and power management of PV, AE, PEMFC and SC, hybrid power generation system friendliness and active grid-connection are realized. The validity and correctness of modeling and control strategies referred in this paper are verified through simulation results based on PSCAD/EMTDC software platform.     

Control analysis of renewable energy system with hydrogen storage for residential applications

The combination of an electrolyzer and a fuel cell can provide peak power control in a decentralized/distributed power system. The electrolyzer produces hydrogen and oxygen from off-peak electricity generated by the renewable energy sources (wind turbine and photovoltaic array), for later use in the fuel cell to produce on-peak electricity. An issue related to this system is the control of the hydrogen loop (electrolyzer, tank, fuel cell). A number of control algorithms were developed to decide when to produce hydrogen and when to convert it back to electricity, most of them assuming that the electrolyzer and the fuel cell run alternatively to provide nominal power (full power). This paper presents a complete model of a stand-alone renewable energy system with hydrogen storage controlled by a dynamic fuzzy logic controller (FLC). In this system, batteries are used as energy buffers and for short time storage. To study the behavior of such a system, a complete model is developed by integrating the individual sub-models of the fuel cell, the electrolyzer, the power conditioning units, the hydrogen storage system, and the batteries. An analysis of the performances of the dynamic fuzzy logic controller is then presented. This model is useful for building efficient peak power control.     

The potential for integration of hydrogen for complete energy self-sufficiency in residential buildings with photovoltaic and battery storage systems

This paper presents an analysis of energy production in a pilot building located in Slovenia, which is a typical residential house with an installed photovoltaic (PV) system and pilot battery storage system. Energy management system gathers data from smart meters every 15 min. As the pilot building location is in central Europe, complete energy self-sufficiency cannot be provided. The most problematic period of energy production with photovoltaic systems is winter. Solar radiation during the winter is much lower than in the summer and sometimes snow covers photovoltaic panels and disables energy production. Energy production and energy consumption are analyzed for one year. This study shows that complete self-sufficiency can be achieved by supplementing photovoltaic systems with hydrogen fuel cells. The amount of hydrogen, which would suffice for complete self-sufficiency for the whole period, is calculated according to the analyzed data. A synergy between photovoltaic system and hydrogen fuel cells is a step forward to complete self-sufficiency with renewable energy sources. The share of self-sufficiency of a hybrid PV fuel cell system would be 62.13%, meaning that there is no possibility for complete self-sufficiency from the pilot system. The shortage of hydrogen is 144.24 kg for one year and for achieving complete energy self-sufficiency, PV system should be bigger. A hybrid system with photovoltaic system, battery storage system and hydrogen fuel cells can be a solution for complete self-sufficiency. From an economic point of view, such systems are accessible for commercial use. The initial investment is relatively high, because of the high cost of the hydrogen storage tank.     

Hybridized off-grid fuel cell/wind/solar PV /battery for energy generation in a small household: A multi-criteria perspective

In this paper, the robust capability of HOMER and Criteria-COPRAS is deployed to explore the prospect of selecting a renewable energy system. The energy system consisting of wind turbines, solar photovoltaic (PV), fuel cell (FC), electrolyzer, hydrogen storage, and battery energy storage is intended to power a residential load in Lagos Nigeria. Based on the economic metric, the results show that the optimal system is a PV-Battery whose total net present cost (TNPC) and initial investment cost are $9060 and $3,818, respectively. However, if the energy systems are ranked based on multiple criteria (economic, technical and environmental aspects), the most preferred of the feasible energy systems is a hybrid PV-FC-wind-battery (TNPC-$10,324, initial cost: $7670). The study results indicate that, for viability in the adoption of hydrogen energy storage as part of the hybrid energy system, the selection metric should be based on more than one criterion.     

Modeling and performance analysis of renewable hydrogen energy hub connected to an ac/dc hybrid microgrid

This paper proposes a system modeling and performance analysis of a renewable hydrogen energy hub (RHEH) connected to an ac/dc hybrid microgrid (MG). The proposed RHEH comprises a photovoltaic (PV)-based renewable energy source (RES) as the primary source, a proton exchange membrane fuel cell (PEMFC) as the secondary power source, and a proton exchange membrane electrolyzer (PEMELZ) that can generate and store hydrogen in a hydrogen tank. All these resources are directly connected at the dc bus of the ac/dc microgrids. The PEMFC operates and utilizes the hydrogen from the hydrogen tank when the energy generated by RES cannot meet the load demand. A coordinated power flow control approach has been developed for the RHEH to mitigate the mismatch between generation and demand in the ac/dc microgrid and produce renewable hydrogen when renewable power is in excess. The paper also proposes a modified hybrid Perturb & Observe-Particle Swarm Optimization (Hybrid PO-PSO) algorithm to ensure the maximum power point tracking (MPPT) operation of the PV and the PEMFC. The operation of the proposed RHEH is validated through simulations under various critical conditions. The results show that the proposed RHEH is effective to maintain the system power balance and can provide power-to-hydrogen and hydrogen-to-power when required.     

Simulation of a solar-hydrogen-fuel cell system: results for different locations in Mexico

The authors report the results obtained from the simulation of a PV-hydrogen-fuel-cell (PVHFC) hybrid system for different locations in Mexico. The hybrid system consists of photovoltaic arrays coupled with an electrolyzer to produce hydrogen, a fuel cell which converts chemical energy (H₂) to electricity, a hydrogen storage, a battery storage system, and the load. In this kind of system, all components can be connected electrically in parallel. The voltage of the PV arrays the fuel cell must be high enough to charge the battery, and the voltage of the electrolyzer must be low enough for the battery to power it during periods of low insolation. The simulation is based on the electrical component models and variable insolation data depending on the location.     

Performance investigation of an integrated wind energy system for co-generation of power and hydrogen

In this paper, a wind turbine energy system is integrated with a hydrogen fuel cell and proton exchange membrane electrolyzer to provide electricity and heat to a community of households. Different cases for varying wind speeds are taken into consideration. Wind turbines meet the electricity demand when there is sufficient wind speed available. During high wind speeds, the excess electricity generated is supplied to the electrolyzer to produce hydrogen which is stored in a storage tank. It is later utilized in the fuel cell to provide electricity during periods of low wind speeds to overcome the shortage of electricity supply. The fuel cell operates during high demand conditions and provides electricity and heat for the residential application. The overall efficiency of the system is calculated at different wind speeds. The overall energy and exergy efficiencies at a wind speed 5 m/s are then found to be 20.2% and 21.2% respectively.     

Thermodynamic analysis of a combined PV/T–fuel cell system for power,heat, fresh water and hydrogen production

A hybrid renewable energy system is proposed and analyzed for electricity, heated air, purified water and hydrogen production. Energy, exergy and economic analyses are performed to analyze and determine the performance of the system under different operating conditions. The photovoltaic/thermal (PV/T) system produces heat and electricity for residential applications. Excess power is used to operate electrolyser which produces hydrogen to be fed directly to a fuel cell. Fuel cell is operated during high power demand, and it produces electricity, heat and water for residential applications. The water produced as a by-product by the fuel cell is used for drinking water supply. The parametric studies are conducted to determine the efficiencies of the system with and without fuel cell network for hot air, power and purified water. When fuel cell heat is used, the overall system efficiency increases to 5.65% for energy and 19.8% for exergy. Up to 80 L of drinkable water can be collected from the fuel cell when operated for extended periods. The present study confirms a significant economic gain when fuel cell heat and water are utilized as useful outputs.