Self-propagating high-temperature synthesis of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiC-based ceramic materials

Dense Al₂O₃/TiC composite ceramic materials are synthesized using the SHS compaction of mixtures based on TiO₂ + Al + C. Mineralizing and heating additives are introduced into compounds. The phase composition and microstructure of combustion products are investigated by x-ray phase analysis, electron microscopy, and microprobe techniques. Two Al₂O₃ modifications are revealed. Special attention is devoted to the presence of residual graphite. The mechanisms of phase formation and formation of the microstructure of combustion products are considered.     

Synthesis and high-temperature heat capacity of Yb<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Lu<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Yb₂Sn₂O₇ and Lu₂Sn₂O₇ have been prepared by solid-state reactions, by firing mixtures of Yb₂O₃ or Lu₂O₃ and SnO₂ at 1473 K, and the molar heat capacity of these compounds (pyrochlore structure) has been determined by differential scanning calorimetry. The C _p (T) data have been used to evaluate the thermodynamic properties of the stannates: enthalpy increment, entropy change, and reduced Gibbs energy.     

Ionic conductivity in the Lu<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> system

Nanocrystalline Lu₂O₃-TiO₂ (33.3–44 mol % Lu₂O₃) materials with a partially disordered pyrochlore structure, prepared via heat treatment in the range 1400–1750°C, are found to possess high oxygen ionic conductivity. Their 740°C conductivity is 10^-3 to 10^-2 S/cm, depending on the heat-treatment temperature and composition, which is comparable to that of the well-known fluorite solid electrolyte ZrO₂-9 mol % Y₂O₃.Translated from Neorganicheskie Materialy, Vol. 41, No. 3, 2005, pp. 324–331.Original Russian Text Copyright © 2005 by Shlyakhtina, Mosunov, Stefanovich, Knotko, Karyagina, Shcherbakova.This revised version was published online in April 2005 with a corrected cover date.This revised version was published online in April 2005 with a corrected cover date.     

Phase composition and microstructure of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions prepared by self-propagating high-temperature synthesis

The combustion synthesis, microstructure, chemical composition, and phase composition of cast Al₂O₃-Cr₂O₃ materials are described. The synthesized solid solutions are based on corundum or chromia, depending on the Al₂O₃ and Cr₂O₃ contents. Using self-propagating high-temperature synthesis, a cast aluminum oxynitride is obtained for the first time.     

Properties of nanocrystalline ZrO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-CeO<Subscript>2</Subscript>-CoO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> powders

We have studied the properties of nanocrystalline ZrO₂-Y₂O₃-CeO₂-CoO-Al₂O₃ powders prepared via hydrothermal treatment of a mixture of coprecipitated hydroxides at 210°C. A number of general trends are identified in the variation of the properties of the synthesized powders during heat treatment at temperatures from 500 to 1200°C. Our results demonstrate that the addition of 0.3 mol % CoO to nanocrystalline ZrO₂-based powders containing 1 to 5 mol % Al₂O₃ allows one to obtain composites with good sinterability at a reduced temperature (1200°C).     

A novel spray co-precipitation method to prepare nanocrystalline Y<Subscript>2</Subscript>O<Subscript>3</Subscript> powders for transparent ceramics

A novel spray co-precipitation method was adopted to synthesize well dispersed nanocrystalline Y₂O₃ powders for transparent ceramics. Several analytic techniques such as XRD, SEM, BET and UV–Vis–NIR spectrophotometer were used to determine the properties of coprecipitated powders, and the microstructure and optical properties of as-fabricated ceramics. The influences of the aging time on powders and ceramics were systematically investigated. Precursors were completely reached to yield the Y₂O₃ phase after being calcined at 1250 °C in air. The calcined Y₂O₃ powders exhibited an approximately spherical morphology with narrow size distribution and weak agglomeration, with mean particle size of ~140 nm. The co-precipitated nanopowders with an aging time of 12 h exhibited the best sintering activity due to the low agglomeration, and the in-line transmittance of Y₂O₃ ceramic sintered at 1800 °C for 8 h in vacuum reached to 77.2% at 1064 nm (1 mm thickness).     

Crystallization from high-temperature solutions in the K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

We have studied general trends of crystallization from high-temperature solutions in the K₂O-P₂O₅-V₂O₅-Bi₂O₃ system at P/V = 0.5?2.0, K/(P + V) = 0.7?1.4, and Bi₂O₃ contents from 25 to 50 wt % and identified the stability regions of BiPO₄, K₃Bi₅(PO₄)₆, K₂Bi₃O(PO₄)₃, and K₃Bi₂(PO₄)_{3 ? x} (VO₄) _x (x = 0?3) solid solutions. The synthesized compounds have been characterized by X-ray powder diffraction and IR spectroscopy, and the structure of two solid solutions has been determined by single-crystal X-ray diffraction (sp. gr. C ₂/c): K₃Bi₂(PO₄)₂(VO₄), a = 13.8857(8), b = 13.5432(5), c = 6.8679(4) Å, β = 114.031(7)°; K₃Bi₂(PO₄)_1.25(VO₄)_1.75, a = 13.907(4), b = 13.615(2), c = 6.956(2) Å, β = 113.52(4)°.     

Synthesis and microstructure of nanocrystalline Yb<Subscript>2</Subscript>O<Subscript>3</Subscript> powders

Nanocrystalline ytterbia powders have been synthesized using different precursors prepared by precipitation from nitrate solutions: ytterbium carbonates, oxalates, and hydroxides. The powders have been characterized by X-ray diffraction and scanning electron microscopy. The nature of the precursor has no effect on the crystallization temperature of ytterbia but influences its microstructure. The particles range in shape from spherical to platelike. The average crystallite size of the Yb₂O₃ powders is 20–25 nm. Raising the heat-treatment temperature from 600 to 1000°C increases the crystallite size to 33–46 nm. The highest thermal stability is offered by the ytterbia powders prepared through carbonate decomposition.     

Microstructure and high-temperature strength of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Er<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>/ZrO<Subscript>2</Subscript> ternary melt growth composite

A new Al₂O₃/Er₃Al₅O₁₂(EAG)/ZrO₂ ternary MGC (Melt Growth Composite) with a novel microstructure has been fabricated by unidirectional solidification. This ternary MGC has a microstructure consisting of continuous networks of single-crystal Al₂O₃, single-crystal EAG and fine cubic-ZrO₂ phases without grain boundaries. The ternary MGC has also characteristic dimensions of the microstructure of around 2–4 m for EAG phases, around 2–4 m for Al₂O₃ phases reinforced with around 0.4–0.8 m cubic-ZrO₂ phases. No amorphous phases are formed at interfaces between phases in the ternary MGC. The ternary MGCs flexural strength at 1873 K is approximately 700 MPa, more than twice the 330 MPa of the Al₂O₃/EAG binary MGC. The fracture manner of the Al₂O₃/EAG/ZrO₂ ternary MGC at 1873 K shows the same intergranular fracture as the Al₂O₃/EAG binary MGC, but is significantly different from the transgranular fracture of the sintered ceramic.     

Electrical conductivity of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Tm<Subscript>2</Subscript>O<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions

New solid solutions, Bi_2?x?y Tm _x Nb _y O_3+δ, with tetragonal and cubic structures have been synthesized in the Bi₂O₃-Tm₂O₃-Nb₂O₅ system, and their electrical conductivity has been measured at temperatures from 670 to 1020 K. The 1020-K conductivity of the tetragonal solid solution Bi_1.8Tm_0.15Nb_0.05O_3+δ is comparable to that of Bi_1.75Tm_0.25O₃, the best conductor in the Bi₂O₃-Tm₂O₃ system.     

Physical properties of lead-free BaFe<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>O<Subscript>3</Subscript> ceramics obtained from mechanochemically synthesized powders

Modern electronics expect functional materials that are eco-friendly and are obtained with lower energy consumption technological processes. The multiferroic lead-free BaFe_1/2Nb_1/2O₃ (BFN) ceramic powder has been prepared by mechanochemical synthesis from simple oxides at room temperature. The development of the synthesis has been monitored by XRD and SEM investigations, after different milling periods. The obtained powders contain large agglomerates built by crystals with an estimated size about 12–20 nm depending on the period of milling. From this powder, the multiferroic BFN ceramic samples have been prepared by uniaxial pressing and subsequent sintering pressureless method. The morphology of the BFN ceramic samples strongly depends on high-energy milling duration. The properties of the ceramic samples have been investigated by dielectric spectroscopy, in broad temperature and frequency ranges. The high-energy milling of the powders has strongly affected the dielectric permittivity and dielectric loss of the BaFe_1/2Nb_1/2O₃ ceramic samples. The usage of the mechanochemical synthesis to obtain the multiferroic lead-free BFN materials reduces the required thermal treatment and simultaneously improves the parameters of the BFN ceramics.     

Effect of Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> doping on the crystallization behavior of BaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

We gave studied the crystallization behavior of 30BaO · 25Bi₂O₃ · 45B₂O₃ glasses doped with Eu₂O₃ to different levels. At a Eu₂O₃ content of 7 mol % or higher, the glasses undergo volume crystallization. The only precipitating phase is a solid solution between europium and bismuth oxides. With increasing europium concentration in the glass, the structure of the crystallites changes from cubic to rhombohedral. We have investigated the morphology, physicochemical properties, and luminescence spectra of the glasses and glass-ceramics.     

Combustion synthesis of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

Nanophase of Ga₂O₃ has potentially important applications in photocatalysis. We report the synthesis of nanophase of the metastable γ- and stable β-Ga₂O₃ and demonstrate that it is possible to prepare a continuously varying mixture starting from the pure metastable γ- to the pure β-phase. This is achieved by employing a facile and reliable combustion route, using urea as a fuel. Typical grain sizes, as estimated from XRD studies, are about 3 nm. Given the importance of surface chemistry for potential applications, thermogravimetric coupled with mass spectrometry is used in conjunction with FTIR to elucidate the chemistry of the adsorbed surface layer. Studies on the γ-Ga₂O₃ phase indicate the occurrence of weight loss of 8.1% in multiple steps. Evolved gas analysis and FTIR studies show presence of physisorbed H₂O molecules and chemisorbed –(OH) ions bonded to active surface states and accounts predominantly for the observed weight loss.     

Preparation of magnetic composites through SrO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass crystallization

Glasses with nominal compositions 11SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (1) and 15SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (2) were prepared by rapidly quenching oxide melts between counterrotating steel rollers. The glasses were then heat-treated in the range 650–950°C to produce glass-ceramic samples. The samples were characterized by X-ray diffraction, electron microscopy, and magnetic measurements. The phase composition of the glass-ceramics was determined, and their microstructure and magnetic properties were studied. The annealing temperature was shown to have a strong effect on the coercivity of the materials, which reaches 650 and 570 kA/m for compositions 1 and 2, respectively.     

Morphology and optical properties of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript>

The chemical and phase compositions of antimony(III) oxide samples prepared under various conditions have been determined. The size and shape of their particles have been assessed by scanning electron microscopy, and the effect of UV irradiation on their diffuse reflectance spectra has been studied. The results are used to determine the whiteness index, integrated reflectance, and lightfastness of the samples.     

Dielectric properties of B<Subscript>2</Subscript>O<Subscript>3</Subscript> doped Sm(Co<Subscript>1/2</Subscript>Ti<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramics at microwave frequency

The microwave dielectric properties and the microstructures of Sm(Co_1/2Ti_1/2)O₃ ceramics with B₂O₃ additions (0.25 and 0.5 wt%) prepared by conventional solid-state route have been investigated. The prepared Sm(Co_1/2Ti_1/2)O₃ exhibited a mixture of Co and Ti showing 1:1 order in the B-site. Doping with B₂O₃ (up to 0.5 wt%) can effectively promote the densification of Sm(Co_1/2Ti_1/2)O₃ ceramics with low sintering temperature. It is found that Sm(Co_1/2Ti_1/2)O₃ ceramics can be sintered at 1,260 °C due to the grain boundary phase effect of B₂O₃ addition. At 1,290 °C, Sm(Co_1/2Ti_1/2)O₃ ceramics with 0.5 wt% B₂O₃ addition possess a dielectric constant (ε _r) of 27.7, a Q × f value of 33,600 (at 9 GHz) and a temperature coefficient of resonant frequency (τ_f) of −11.4 ppm/ °C. The B₂O₃-doped Sm(Co_1/2Ti_1/2)O₃ ceramics can find applications in microwave devices requiring low sintering temperature.     

Properties of fluorine-doped PbMg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>O<Subscript>3</Subscript> ceramics

We report the first fluorine doping of lead magnesium niobate in the PbMg _{(1 + x)/3}Nb_{(2 ? x)/3}O_{3 ? x} F _x system in a wide composition range, x = 0.025 to 0.625. The fluorine content of the samples is shown to be substantially lower than the intended one because of the fluorine volatilization in the form of HF during synthesis and sintering in air. The ceramics consist of magnesium and lead oxides undetectable by x-ray diffraction, and a perovskite phase whose composition can be represented by the formula PbMg_{(1 + m)/3}Nb_{(2 ? m)/3}O_{3 ? m} F _m , where the fluorine content after sintering is m ≤ 0.12. The PbO and MgO contents of the ceramics depend on the starting mixture composition (x) and heat-treatment conditions (hydrogen fluoride and lead oxide volatilization). As a result of the low fluorine content, the diffraction patterns of the samples show no superlattice reflections, and their lattice parameter varies insignificantly with x. Data are presented on the temperaturedependent dielectric permittivity of ceramic samples sintered and annealed under different conditions.     

Heat release in the preparation of TiC-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramics

Mixtures for the self-propagating high-temperature synthesis of TiC-Al₂O₃ ceramics for radioactive waste immobilization have been studied using a modified BKS-3 combustion bomb calorimeter.     

Strain localization in compressed ZrO<Subscript>2</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>) ceramics

Spatiotemporal distributions of local components of the distortion tensor of a nonplastic material—yttria partially stabilized tetragonal zirconia (YTZ) ceramics—have been studied under active compressive straining conditions using double-exposure speckle photography techniques. The strain localization patterns are presented and the features of macroscopic strain inhomogeneity in the elastic state of YTZ ceramics are considered.     

Thermoelectric properties of WO<Subscript>3</Subscript>-based ceramics doped with Co<Subscript>2</Subscript>O<Subscript>3</Subscript>

Tungsten trioxide (WO₃) doped with cobalt sesquioxide (Co₂O₃) was prepared by a conventional mixed oxide processing route and the thermoelectric properties were studied from 300 up to 1,000 K. The addition of Co₂O₃ to WO₃ resulted in an increase in both the grain size and porosity, indicating that Co₂O₃ promotes the grain grown of WO₃. The magnitude of the electrical conductivity (σ) and the absolute value of the Seebeck coefficient (|S|) depended strongly on the Co₂O₃ content. As for the power factor (σS ² ), the 5.0 mol% sample has the maximum value of the power factor which is 0.12 μWm⁻¹K⁻² at 873 K.