N掺杂TiO2薄膜光催化性能的研究

采用溶胶-凝胶法,以Ti(OC4H9)4和氨水等为原料制备纯二氧化钛、N掺杂以及N,Zn2+共掺杂的二氧化钛光催化薄膜.用X射线衍射和X光电子能谱等对薄膜进行了表征,紫外光和可见光下催化剂降解甲基橙溶液的实验结果表明,掺杂TiO2薄膜比无掺杂TiO2薄膜的光催化效率明显提高,并且可见光下对甲基橙溶液有一定的光催化活性,但Zn2+的存在对掺杂薄膜的光催化效率没有显著改善.分析原因可能是N掺杂在价带和导带之间形成了缺陷能级,减小了TiO2的禁带能隙,从而使TiO2的吸收带发生红移,实现可见光响应.     

等离子复合处理制备光催化N掺杂TiO2薄膜（英文）

通过等离子合金化技术在不锈钢表面制备TiN薄膜,然后对TiN薄膜进行热氧化得到N掺杂TiO2薄膜。同时制备 TiO2薄膜作为对比研究。利用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)及紫外-可见分光光度仪(UV-Vis)对得到的薄膜进行表征。XRD测试结果表明:经过450 °C氧化处理的薄膜中存在锐钛矿晶型的TiO2。经热氧化后薄膜表面均匀分布着尺寸接近的微小凸起物。TiO2和N掺杂TiO2的带隙分别为3.25eV和3.08eV。可见光下薄膜催化剂降解亚甲基蓝溶液的实验结果表明:N 掺杂TiO2薄膜比未掺杂TiO2薄膜的光催化效率明显高,可见光照射150min后对亚甲基蓝溶液的最终降解率为20%。     

等离子复合处理制备光催化N掺杂TiO_2薄膜(英文)

通过等离子合金化技术在不锈钢表面制备TiN薄膜,然后对TiN薄膜进行热氧化得到N掺杂TiO2薄膜。同时制备 TiO2薄膜作为对比研究。利用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)及紫外-可见分光光度仪(UV-Vis)对得到的薄膜进行表征。XRD测试结果表明:经过450 °C氧化处理的薄膜中存在锐钛矿晶型的TiO2。经热氧化后薄膜表面均匀分布着尺寸接近的微小凸起物。TiO2和N掺杂TiO2的带隙分别为3.25eV和3.08eV。可见光下薄膜催化剂降解亚甲基蓝溶液的实验结果表明:N 掺杂TiO2薄膜比未掺杂TiO2薄膜的光催化效率明显高,可见光照射150min后对亚甲基蓝溶液的最终降解率为20%。     

Zr和N共掺杂TiO2的制备、表征及其光催化性能

利用水解沉淀法制备TiO2、N-TiO2、Zr-TiO2以及Zr和N共掺杂的纳米TiO2,用TEM、XRD、XPS和UV-Vis-DRs等方法对光催化剂的结构、元素组成和对可见光的响应等性能进行表征,并以甲基橙为目标降解物,测试其光催化降解效果。结果表明,Zr掺杂能够降低TiO2光催化剂的粒径;Zr和N共掺杂可以起到协同作用,提高样品的光催化活性,同时增强样品在可见光区的响应。Zr和N共掺杂TiO2在高压汞灯光照下比TiO2具有更好的光催化效果,2%Zr和N共掺杂TiO2光照3h后对甲基橙的降解率比纯TiO2提高32%。     

Li+掺杂TiO2薄膜的制备及晶化行为

本文采用DTA,XRD,SEM及Raman光谱等测试手段,研究了利用溶胶-凝胶法制备LiNO3掺杂的TiO2薄膜的相变行为,提出了通过加入Li+离子降低薄膜从无定形到锐钛矿、锐钛矿到金红石的相转变温度的方法.并通过甲基橙水溶液的光催化降解实验表明在600℃热处理温度下的LiNO3掺杂的TiO2薄膜的光催化效率高于未掺杂的TiO2薄膜.     

等离子合金化/热氧化复合技术制备光催化N掺杂TiO2薄膜

目的 提高316 L不锈钢表面的光催化和亲水性能.方法 通过等离子表面合金化技术在316 L不锈钢表面制备结合良好的TiN薄膜,然后对TiN薄膜进行热氧化,得到N掺杂TiO2薄膜.利用X射线衍射仪、X射线光电子能谱仪、扫描电子显微镜及紫外-可见分光光度仪对制备的N掺杂TiO2薄膜进行表征,并通过光催化实验和亲水性实验考察其光催化性能和亲水性.结果 经过空气中450℃氧化处理2 h的薄膜中存在锐钛矿晶型的TiO2,样品中的N元素取代了部分O.未掺杂TiO2和N掺杂TiO2的带隙宽度分别为3.25、3.08 eV.经热氧化处理后,薄膜表面致密,无裂纹和微孔,均匀分布着尺寸相近的微小凸起物.经可见光照射150 min后,N掺杂TiO2薄膜对亚甲基蓝溶液的最终降解率为20%.此外,N掺杂TiO2薄膜具有较高的亲水性,可见光照射下,30min内接触角降为8.5°.结论 N掺杂TiO2薄膜能有效提高316 L不锈钢表面的光催化和亲水性能.     

掺杂锌提高TiO2光催化薄膜的杀菌功能

采用溶胶-凝胶法,利用旋涂技术,以钠钙硅酸盐玻璃为基片制备了掺杂锌的TiO2薄膜,并研究了醋酸锌含量及热处理温度对二氧化钛薄膜光催化性和杀菌性能的影响.掺杂锌提高了甲基橙在紫外线照射下的光催化降解效率,也改进了对大肠杆菌的杀菌能力.利用AFM观察了掺杂锌TiO2薄膜的形貌和粗糙度.掺杂锌量为4%,在550℃下热处理的4层TiO2薄膜具有较高的性能.     

掺铜二氧化钛纳米颗粒的制备及其催化性能（英文）

采用溶胶-凝胶法制备掺铜量为0~2.0%(摩尔分数)的二氧化钛纳米颗粒。应用X射线衍射(XRD)、X射线光电子能谱(XPS)和场发射电子显微镜(FE-SEM)技术对二氧化钛纳米颗粒的晶体结构、化学价态和形貌进行表征。样品的光学吸收性能用紫外-可见吸收光谱进行表征;其光催化性能通过在紫外-可见光照射下分解20 mg/L甲基橙溶液进行表征。结果表明,掺铜二氧化钛纳米颗粒具有比纯二氧化钛更优的光催化性能,尤其是铜掺杂量为1.0%的二氧化钛TiO2纳米颗粒具有最好的光催化性能。铜掺杂能提高二氧化钛在紫外-可见光区对光的吸收、减小电子-空穴对的复合,因此,铜掺杂使二氧化钛的光催化性能得到提高。     

电场热处理工艺制备Li+,Sb3+掺杂TiO2光催化薄膜

以钛酸四丁酯和LiNO3,SbCl3为原料,利用电场热处理工艺在石英玻璃表面制备出一层Li ,Sb3 掺杂的TiO2光催化薄膜,采用XRD和AFM等测试手段分析了Li ,Sb3 掺杂的TiO2薄膜在电场热处理过程中的晶化行为.然后在理论上分析了外电场对TiO2薄膜热处理过程的影响,提出了通过引入外电场促进Li ,Sb3 掺杂的TiO2薄膜从锐钛矿到金红石相转变的方法.通过甲基橙水溶液的光催化降解实验表明在400℃电场热处理条件下的TiO2薄膜的光催化效率高于未引入电场热处理的TiO2薄膜.     

硅胶负载掺钕TiO2的制备及其光催化性能

采用溶胶-凝胶法将掺钕二氧化钛负载在二氧化硅上制备复合光催化剂（Nd/TiO2-SiO2）,利用XRD、SEM、FT-IR和DRS对Nd/TiO2-SiO2进行表征,并通过甲基橙溶液的光催化降解评价其光催化性能。结果表明：Nd/TiO2-SiO2在可见光区388-619nm范围内的光吸收性能随着钕掺杂量的增大而增强,钕掺杂有利于降低电子-空穴的复合率,钕和二氧化硅提高TiO2的光催化活性。在600℃煅烧的0.1%Nd/TiO2-SiO2的光催化活性最高,1h后甲基橙降解率为82.9%。     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

Thermodynamics Study on the Decomposition of Chromite with KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

Influence of Heat Treatment on Damping Behaviour of the Magnesium Wrought Alloy AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.     

Growth Kinetics of Single Inclusion Particle in Molten Melts

On the basis of the single-particle framework, a new theory on inclusion growth in metallurgical melts is developed to study the kinetics of inclusion growth on account of reaction and collision. The studies show that the early growth of inclusion depends on reaction growth and Brawnian motion collision, and where the former is decisive, the late growth depends on turbulence collision and Stokes＇ collision, and where the former is dominant; collision growth is very quick during the smelting process, lessened in the refining process, but nearly negligible in the continuous casting process.