共查询到20条相似文献,搜索用时 418 毫秒
2.
3.
4.
《合成材料老化与应用》2012,(1):60-60
我国工业和信息化部日前公布《产业关键共性技术发展指南(2011年)》指出,石化行业应加快8项技术的研究,其中合成材料方面包括:超临界二氧化碳挤出发泡高分子材料的制备工艺与成套装备关键技术,包括重点研究超临界二氧化碳作为发泡剂挤出发泡聚丙烯材料生产技术以及成套装备关键技术, 相似文献
5.
6.
7.
8.
<正>塑料加工高能耗、高浪费的"双高"局面有望得到改观。据悉,中国工程院院士、华南理工大学聚合物新型成型装备国家工程研究中心主任瞿金平研究团队基于拉伸流变原理,开发了高分子材料塑化输运方法及设备,研发出塑料无螺杆塑化挤出技术,能耗比传统螺杆挤压系统降低30%左右。该技术属于国内外首创。(慧聪塑料网) 相似文献
9.
10.
11.
从挤出温控范围、配方体系、混料工艺、设备性能、工艺制度等方面对PVC异型材挤出工艺进行了讨论,阐述了保证挤了工艺的措施和方法。试验证明,按马鞍型温控温控曲线生产可获得较好的产品质量;原材料、生产设备不同时均对温控曲线有影响。 相似文献
12.
木塑复合材料挤出技术的现状及发展趋势 总被引:2,自引:0,他引:2
木塑复合材料挤出技术的出现符合我国当前可持续性发展的概念,主要阐述了木塑复合材料挤出技术的现状及目前我国木塑复合材料挤出生产中在设备、模具、辅机、配方及制品截面设计方面存在一些需要改进的问题,并对木塑复合材料挤出技术未来的发展趋势作了展望。 相似文献
13.
从配方设计,各组分选择,混合料的特殊处理,单螺杆挤出机进行粉状挤出成型的全过程,论述了高分子量聚氯乙烯密封条的研制和开发。重点阐述物料组成,加工工艺对密封条性能的影响。尤其对配方中各组分的选择,份数,作用都作了详尽的论述,并且对混料顺序与混合物质量之间的关系及挤出工艺也作了充分的解释。研制的密封条不仅具有耐老化,尺寸稳定性好,断裂伸长率高,低温柔韧性好等特点,而且配方独特,工艺简单,生产效率高,成本低。 相似文献
14.
15.
《Plastics, Additives and Compounding》2000,2(9):32-38
This month's Plastics Additives & Compounding discusses some of the latest developments in twin screw extrusion technology for the compounding and masterbatch industries. 相似文献
16.
17.
Soft, low-compression-set and chemically resistant TPEs have been developed from advanced PVC blend technology. These blends have low-temperature flexibility comparable to that of commonly used TPEs and can be made flame-retardant. These new TPEs are suitable for applications in consumer products, automotive, wire and cable insulation, and jacketing. This new class of TPEs, suitable for injection and extrusion operations, represents a significant advance in PVC compounding technology. 相似文献
18.
Polypropylene/low density polyethylene blend matrices have been reinforced with short glass fibers in order to study their tensile, flexural, and impact behavior. Two-roll milling and twin-screw extrusion compounding methods were used to incorporate the fiber within the polymer matrices, and standard test samples were prepared by injection molding. The effects of matrix composition and fiber concentration on mechanical properties were investigated keeping in mind the matrix and fiber morphology, the latter being intimately dependent upon the compounding method employed. 相似文献
19.
20.
崔文瑾 《现代塑料加工应用》1998,10(5):8-10
提出了低发泡硬质聚氯乙烯挤出成型的配方和工艺。研究了稳定型,改性剂等配方因素对制品密度、表面、泡孔结构的影响,并讨论了制品密度与挤出工艺的关系。 相似文献