共查询到20条相似文献,搜索用时 171 毫秒
1.
对烷氧基化反应的釜式烷氧基化反应器、循环喷雾的Press烷氧基化反应器、喷射式回路反应器和连续管式反应器进行了介绍,对比了各自的特点。 相似文献
2.
系统介绍了几种已经工业化应用的烷氧基化聚合反应器,如管式、降膜式、釜式、意大利Press、瑞士Buss、Linde以及外循环釜式等反应器的优缺点,同时介绍了近年来日本、欧美和中国大陆主要烷氧基化聚合反应器的结构及特点。 相似文献
3.
4.
搅拌釜式反应器的设计过程当中,开孔补强的设计计算问题是最复杂。因为,在搅拌釜式反应器的釜体上需要的开孔数目多而且开孔类型各不相同。本文,通过分析研究搅拌釜式反应器的开孔补强计算方法的选择、开孔直径的判别、开孔补强的判别,提出如何对搅拌釜式反应器进行快速、简便的开孔补强设计计算。 相似文献
5.
聚酯立式搅拌釜用搅拌器安装形式讨论 总被引:1,自引:1,他引:0
对酯化反应釜主要釜型立式搅拌釜的上装式搅拌器的缺点进行分析,提出了下装式搅拌器的优越性,并简要介绍了下装式搅拌器的目前状况及其前景 相似文献
6.
为了正确指导化工行业中釜式反应器的设计选型问题,笔者选取了2021—2022年发生的2起典型釜式反应器的事故,并结合实际工作中的方法经验,通过对釜式反应器进行结构论述和工艺性能解析,总结出5个关键性的选型环节,为化工行业釜式反应器的选型提供了参考和依据。 相似文献
7.
8.
9.
聚合反应工程——第6章 搅拌釜特性参数的测试技术 总被引:1,自引:0,他引:1
对搅拌釜操作有关特性参数的测定,既是一项基础工作,也是一项专门技术。由于这些特性参数显著地受着搅拌器型式和内部构件的影响,而两者间又存在着多种组合,因而掌握其测定技术就更趋重要。从聚合反应工程研究来说,搅拌功率,流体速度及流速分布,混合、传热、传质特性,以及连续搅拌釜式反应器(CSTR)流通系中的停留时间分布(RTD)等,都是评价和设计搅拌釜时所不可缺少的重要指标。在实际 相似文献
10.
一、引言连续釜式反应器为化学工业中最常用的反应器型式之一。它可按不同的方法进行分类,一种方法是以反应器内所进行反应的相为基础而将其分为均相连续釜式反应器和多相连续釜式反应器;另一种方法则按使用的型式进行归类,而分作单级连续釜式反应器和 相似文献
11.
12.
13.
14.
1 INTRODUCTION Airlift loop reactors have emerged as one of the most promising devices in chemical, biochemical and environmental engineering operations. Its main ad-vantages over conventional reactors include excellent contact among different phases, ease of removal or replenishment of particles, and high heat and mass transfer rates[1]. High gas-liquid contacting area and favorable flow pattern are the attractive features of this type of three-phase contactors. Typical processes that ca… 相似文献
15.
作为一种新型的废水生物处理技术,三相生物流化床反应器近年来备受关注。本文从流体力学性能、气液传质特性、反应器结构设计、生物载体等方面对三相生物流化床的技术特点及研究现状进行了综述,表明该类反应器在内部流体力学特征和传质特征方面较其它生物反应器更为复杂,反应器结构、运行参数及载体的选择对处理效果有较大影响;同时总结了其在含油废水处理中的研究成果和进展;最后指出:用于指导反应器结构设计的数学模型的建立及反应器的工程验证仍是该技术今后研究开发的重点。 相似文献
16.
The oxygen volumetric mass transfer coefficient is a key parameter to characterize the performance of aerobic bioreactors. A novel rotating‐drum bioreactor (RDB) fitted with a sparger as proposed in a previous work has demonstrated its excellent gas‐liquid mass transfer performance. To provide primary information on the design and scale‐up of the novel RDB, effects of reactor configuration including the number and width of lifters and operation conditions such as rotational speed, aeration rate, and solid volume fraction on mass transfer performance were systematically investigated in a new medium‐sized RDB. Compared with the stirred bioreactor and traditional RDBs, this new RDB exhibits better mass transfer performance. Taking both operational and reactor configuration parameters into consideration, an empirical correlation to predict the volumetric mass transfer coefficient in this type of RDBs was proposed which is valuable for its design and scale‐up. 相似文献
17.
根据氯醇化反应的特点,利用气液反应的双膜理论,导出了宏观反应速率式,结合管式反应器的流动模型,提出了一个简便、有效的反应器的设计计算方法 相似文献
18.
三相下喷式环流反应器的传质性能 总被引:2,自引:0,他引:2
李永祥 《高校化学工程学报》1997,11(4):366-371
在三相非牛顿型流体体系中,对下喷式环流反应器传质特性进行了实验研究。讨论了表观气速、能量耗散速率、导流筒直径与反应器直径比、喷嘴直径、导流筒下端距反应器底部的距离、固体装填量、羧甲基纤维素钠(CMC)溶液浓度及其流变特性对它的影响。实验结果表明,容积传质系数随表观气速和能量耗散速率的增加有所增加,在实验条件下,发现最优的导流筒直径与反应器直径比在0.4~0.45这一范围、固体装填量大约为3%(体积百分比)、导流筒下端距反应器底部的距离为0.08m左右。同时提出了容积传质系数的经验关联式。 相似文献
19.
The heat transfer efficiency during the pyrolysis process is a key factor to be considered in the design of pyrolysis reactors. In this study, the average apparent heat transfer characteristics of molten plastic pyrolysis in a vertical falling film reactor were explored by experiments and numerical simulation and the apparent heat transfer coefficients were determined. In addition, the temperature distribution and the thickness of the liquid film in the reactor were predicted and the influences of pyrolysis temperatures on the average apparent heat transfer coefficients were discussed. 相似文献
20.
液固磁稳定床中的传热与传质特性研究 总被引:1,自引:1,他引:0
以电化学方法测定了SRNA-4催化剂为固相的液固磁稳定床中的液固传质系数,采用浸没的微型传热探头测量了液固传热系数。实验结果表明:随磁场强度、液体黏度的增大,液固传质系数及传热系数减小;增加表观液速,传质系数、传热系数均增大。进而建立了由物性参数及操作参数估算液固传质Sherwood数及液固传热Nusselt数的关联式,实验值与预测值吻合良好,可为磁稳定床反应器的放大设计和操作优化提供一定的依据。 相似文献