Photocatalytic properties of mesoporous TiO2 nanocomposites modified with carbon nanotubes and copper

The photocatalytic activity of mesoporous TiO₂ modified by the addition of carbon nanotubes (CNTs) and Cu is reported. Nanocomposites of carbon nanotubes (CNTs) containing varying amounts of Cu were formed by treatment with Cu²⁺ then reduced to Cu⁰ using NaBH₄ as the reducing agent. The mesoporous TiO₂, synthesized by a sol-gel method from titanium isopropoxide, was combined with the CNT/Cu nanocomposites to form the photocatalysts which were characterized by XRD, SEM, TEM, FTIR, XPS and BET surface area analysis. The photocatalytic properties of the mesoporous TiO₂ composites were studied by measuring the degradation of methyl orange (MO) which was optimal in the sample containing 20 wt% of the Cu-CNT nanocomposite. The degradation efficiency for MO was a synergistic effect of photo-degradation of TiO₂ and may be due to improvement of the electrical conductivity of the system by the presence of the CNT/Cu networks, since the photodegradation of MO and the photocatalytic activity of the photoactive systems increased with increasing copper content.     

Construction of Au/TiO2 Heterojunction with high photocatalytic performances under UVA illumination

Anatase TiO₂ nanoparticles (NPs) were successfully prepared through a hydrothermal approach, and Au NPs at various Au (0.1–2 wt%) contents were photodeposited onto the TiO₂ NPs surface. The photocatalytic efficiency for the Au/TiO₂ NPs for resorcinol photodegradation throughout UVA illumination was assessed. The TEM images and XPS findings indicated that the Au NPs are highly distributed onto TiO₂ surface in the metallic state. The 0.1%Au/TiO₂ NPs exhibited the highest photocatalytic efficiency of about 95.34%; however, 72.36% is given by pure TiO₂ NPs. It was found that the photodegradation rate of 0.1% Au/TiO₂ NPs exhibited 1.5 times of magnitude higher than pure TiO₂ NPs. 0.1%Au/TiO₂ NPs was considered to be the outstanding photoactive due to the ultimate efficient charge-carriers separation through charge transfer between Au and TiO₂ NPs. The Au NPs sizes, its dispersity on TiO₂ surface and surface plasmon resonance (SPR) were believed the critical factors for the higher photocatalytic performance of 0.1% Au/TiO₂ NPs. The prepared photocatalysts are found to be the promising materials for toxic organic compounds remediation and solar conversion.     

Photocatalytic activity of TiO2 supported on multi-walled carbon nanotubes under simulated solar irradiation

TiO₂ particles supported on multi-walled carbon nanotubes (MWCNTs) were prepared using a sol–gel method to investigate their photocatalytic activity under simulated solar irradiation for the degradation of methyl orange (MO) in aqueous solution. The prepared composites were analyzed using XRD, SEM, EDS and UV–vis absorption spectroscopy. The results of this study indicated that there was little difference in the shape and structure of MWCNTs/TiO₂ composite and pure TiO₂ particles. The composite exhibited enhanced absorption properties in the visible light range compared to pure TiO₂. The degradation of MO by MWCNTs/TiO₂ composite photocatalysts was investigated under irradiation with simulated solar light. The results of this study indicated that MWCNTs played a significant role in improving photocatalytic performance. Different amounts of MWCNTs had different effects on photodegradation efficiency, and the most efficient MO photodegradation was observed for a 2% MWCNT/TiO₂ mass ratio. Photocatalytic reaction kinetics were described using the Langmuir–Hinshelwood (L–H) model. The photocatalyst was reused for eight cycles, and it retained over 95.2% photocatalytic degradation efficiency. Possible decomposition mechanisms were also discussed. The results of this study indicated that photocatalytic reactions with TiO₂ particles supported on MWCNTs under simulated solar light irradiation are feasible and effective for degrading organic dye pollutants.     

Effect of M-doping (M = Fe,V) on the photocatalytic activity of nanorod rutile TiO2 for Congo red degradation under the sunlight

Nanorods TiO₂, Fe-TiO₂ (3 and 2 at.% Fe), V-TiO₂ (5 at.% V) were prepared by a low temperature method and characterized by powder X-ray diffraction, thermal analysis, transmission electron microscope and BTE surface area analysis. The as-prepared samples were evaluated as catalysts for photodegradation of Congo red aqueous solution under the sunlight. Nanorods Fe-doped TiO₂ shows higher adsorption and also higher photocatalytic degradation of Congo red solution compared to pure nanorods TiO₂ rutile. A higher activity is obtained when the amount of doped Fe is 2 at.%, compared to 3 at.%. However, nanorods V-TiO₂ does not show neither adsorption nor photodegradation activity of Congo red solution.     

Photocatalytic degradation of toluene with ozone addition

The main goal of this study is to analyze the characteristics of photodegradation and photocatalytic activation experimentally with the major parameters such as air flow rate, inlet toluene concentration, ozone concentration, UV light and bead material, etc. In particular, the effects of transmissivity of UV radiation with TiO₂ coated supporter (bead material) and void fraction (bead size) on the photocatalytic degradation are estimated for TiO₂/UV and O₃/TiO₂/UV process. In results, the experiment shows that the UV light transmissivity of 5mm glass bead becomes much higher than that of 6.5 mm alumina bead in spite of lower void fraction inducing the higher photoactivation. The conversion of toluene represents about 96% during reaction time 420 min at the toluene concentration of 100 ppm and ozone concentration of 2.5 ppm, showing a conversion rate of ozone of 95% for O₃/TiO₂/UV process. This paper was prepared at the 2004 Korea/Japan/Taiwan Chemical Engineering Conference held at Busan, Korea between November 3 and 4, 2004.     

A unique Cu2O/TiO2 nanocomposite with enhanced photocatalytic performance under visible light irradiation

A unique Cu₂O/TiO₂ nanocomposite with high photocatalytic activity was synthesized via a two-step chemical solution method and used for the photocatalytic degradation of organic dye. The structure, morphology, composition, optical and photocatalytic properties of the as-prepared samples were investigated in detail. The results suggested that the Cu₂O/TiO₂ nanocomposite is composed of hierarchical TiO₂ hollow microstructure coated by a great many Cu₂O nanoparticles. The photocatalytic performance of Cu₂O/TiO₂ nanocomposite was evaluated by the photodegradation of methylene blue (MB) under visible light, and compared with those of the pure TiO₂ and Cu₂O photocatalysts synthesized by the identical synthetic route. Within 120 min of reaction time, nearly 100% decolorization efficiency of MB was achieved by Cu₂O/TiO₂ photocatalyst, which is much higher than that of pure TiO₂ (26%) or Cu₂O (32%). The outstanding photocatalytic efficiency was mainly ascribed to the unique architecture, the extended photoresponse range and efficient separation of the electron-hole pairs in the Cu₂O/TiO₂ heterojunction. In addition, the Cu₂O/TiO₂ nanocomposite also retains good cycling stability in the photodegradation of MB.     

Novel CdIn2S4 nano-octahedra/TiO2 hollow hybrid heterostructure: In-situ synthesis,synergistic effect and enhanced dual-functional photocatalytic activities

The development of highly efficient and multifunctional composite photocatalysts for both energy conversion and environmental governance has obtained great concerns. Here, a novel CdIn₂S₄/TiO₂ (CIS/THS) hollow composite photocatalyst was firstly designed and synthesized via a facile in-situ growth process, where the CdIn₂S₄ nano-octahedra densely attached on the surface of TiO₂ hollow spheres to form the unique hybrid heterostructure. The as-synthesized CIS/THS heterojunctions exhibit much superior photocatalytic activities for hydrogen evolution and Methyl Orange (MO) decomposition in comparison to pure CdIn₂S₄ and TiO₂ hollow spheres. The experimental results display that the CIS/THS-3 sample with the 30 wt% of TiO₂ presents the optimal photocatalytic H₂ production efficiency and its generation rate is 3.38 and 2.56 times as high as those of pure TiO₂ and CdIn₂S₄. Besides, the as-synthesized CIS/THS-3 hybrid also possesses the best MO photodegradation performance and its rate constant is 11.43 and 8.34 times higher than those of pure TiO₂ and CdIn₂S₄. The enhanced photocatalytic activities can be assigned to the synergistic effect, optimized light-harvesting capacity and the formation of hybrid heterostructure for boosting interfacial charge transfer and separation. Furthermore, based on the trapping experiments and ESR analysis, the possible type-Ⅱ interface charge transport mechanism was also proposed. Our study may provide the direct guidance for constructing other hollow TiO₂-based composite photocatalysts with superior photocatalytic water splitting and degradation performances.     

Fabrication of CdS and CuWO4 modified TiO2 nanoparticles and its photocatalytic activity under visible light irradiation

CdS and CuWO₄ modified TiO₂ nanoparticles (CdS–CuWO₄-TiO₂) were prepared by the chemical impregnation method. The as-prepared nanoparticles were characterized using UV–visible-diffuse reflectance spectroscopy (UV–vis-DRS), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and B.E.T. surface area analysis techniques. The photocatalytic activity was evaluated based on the degradation of a dye (eosin-Y) and inactivation of a bacterium (Pseudomonas aeruginosa). The results revealed that CdS–CuWO₄-TiO₂ showed high photocatalytic activity over CdS-TiO₂, CuWO₄-TiO₂ and TiO₂. Moreover the reusability and stability of the photocatalyst for the degradation of eosin-Y was also studied.     

Aerosol processing of Ag/TiO2 composite nanoparticles for enhanced photocatalytic water treatment under UV and visible light irradiation

In this study, we investigated the effect of Ag addition on the photocatalytic reactivity of TiO₂ nanoparticles (NPs). Controlled amounts of Ag were incorporated in TiO₂ NPs using aerosol spray pyrolysis and subsequent calcination. Ag/TiO₂ composite NPs containing different amounts of Ag (e.g., 0, 0.5, 1, 2, and 5 wt%) were successfully fabricated. The photodegradation performances of the as-prepared Ag/TiO₂ composite NPs were tested using methylene blue (MB) solution under UV and visible light irradiation. Upon increasing the Ag content to 1 wt%, the resulting Ag/TiO₂ composite NPs exhibited increased photocatalytic reactivity due to lowered bandgap energy, which promoted both charge generation and separation. However, when the Ag content exceeded 1 wt%, the photocatalytic reactivity of the resulting Ag/TiO₂ composite NPs was considerably deteriorated due to the masking effect of the excess Ag on the reactive sites of TiO₂. Hence, the incorporation of an optimized amount of Ag in the TiO₂ matrix promotes the photocatalytic reactivity of Ag/TiO₂ composite NPs by controlling their bandgap energy and charge generation and separation processes. These results could lead to the development of photodegradation active substances for water treatment in organic solutions.     

Preparation,structural and photocatalytic activity of Sn/Fe co-doped TiO2 nanoparticles by sol-gel method

Pure and Sn/Fe co-doped (0.2 at.% Sn and 0.6 at.% Fe, 0.6 at.% Sn and 0.2 at.% Fe, 1.0 at.% Sn and 1.0 at.% Fe) TiO₂ nanoparticles were synthesized via a sol-gel method and subsequently calcined at different temperatures. Furthermore, the particles were analyzed by TG-DSC, XRD, TEM, HRTEM, EDS, SAED and UV–Vis for investigating the influences of dopant and calcination temperature on the thermal effect, composition, morphology, energy band gap (E_g) and the degradation efficiency of methyl orange (MO) under various light irradiations respectively. Results indicated that Sn/Fe co-doping inhibited the crystallization transformation from anatase to rutile phase of TiO₂ and decreased the E_g. The increased calcination temperature and Sn/Fe co-doped effect brought about the abnormal grain growth of TiO₂ nanoparticles. 0.6 at.% Sn/0.2 at.% Fe and 1.0 at.% Sn/1.0 at.% Fe co-doped TiO₂ nanoparticles presented better photocatalytic performance than pure and 0.2 at.% Sn/0.6 at.% Fe co-doped TiO₂ nanoparticles under visible light irradiation mainly due to the decreased E_g. On the contrary, 0.2 at.% Sn and 0.6 at.% Fe co-doped TiO₂ nanoparticles calcined at 650 °C showed the most excellent photocatalytic performance under UV light irradiation, which was about twice as large as that of pure TiO₂ possibly due to the formed hybrid structure of anatase and rutile phase as well as the h⁺-mediated decomposition pathway.     

Solid‐phase photocatalytic degradation of polystyrene with TiO2/Fe(St)3 as catalyst

A novel photodegradable TiO₂‐Fe(St)₃‐polystyrene (TiO₂‐Fe(St)₃‐PS) nanocomposite was prepared by embedding TiO₂ and Fe(St)₃ into the commercial polystyrene. Ferric stearate was added into polymer as cocatalyst in order to improve the dispersion in polystyrene and photocatalytic efficiency of TiO₂ nanoparticles. Solid‐phase photocatalytic degradation of the TiO₂‐Fe(St)₃‐PS nanocomposite was carried out in an ambient air at room temperature under ultraviolet lamp. The properties of TiO₂‐Fe(St)₃‐PS composite film were compared with that of the pure PS film and the TiO₂‐PS composite film, through weight loss monitoring, scanning electron microscope, gel permeation chromatogram, and FTIR spectroscopy. The photodegradation efficiency of TiO₂‐Fe(St)₃‐PS composite film was higher than that of the pure PS film and the TiO₂‐PS composite film under the UV light irradiation. The average molecular weight (M_w) of TiO₂‐Fe(St)₃‐PS composite film decreased 63.08%, and the number of average molecular weight (M_n) decreased 79.49% after UV light irradiation for 480 h. Photo‐oxidation leads to an increase in the low molecular weight fraction by chain scission, thereby facilitating biodegradation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Microwave photocatalysis III. Transition metal ion‐doped TiO2 thin films on mercury electrodeless discharge lamps: preparation,characterization and their effect on the photocatalytic degradation of mono‐chloroacetic acid and Rhodamine B

BACKGROUND: Mercury electrodeless discharge lamps (Hg‐EDLs) were used to generate UV radiation when exposed to a microwave field. EDLs were coated with doped TiO₂ in the form of thin films containing transition metal ions Mⁿ⁺ (M = Fe, Co, Ni, V, Cr, Mn, Zr, Ag). Photocatalytic degradation of mono‐chloroacetic acid (MCAA) to HCl, CO₂, and H₂O, and decomposition of Rhodamine B on the thin films were investigated in detail. RESULTS: Polycrystalline thin doped TiO₂ films were prepared by dip‐coating of EDL via a sol–gel method using titanium n‐butoxide, acetylacetone, and a transition metal acetylacetonate. The films were characterized by Raman spectroscopy, UV/Vis absorption spectroscopy, X‐ray photoelectron spectroscopy (XPS), electron microprobe analysis and by atomic force microscopy (AFM). The photocatalytic activity of doped TiO₂ films was monitored in the decomposition of Rhodamine B in water. Compared with the pure TiO₂ film, the UV/Vis spectra of V, Zr and Ag‐doped TiO₂ showed significant absorption in the visible region, and hence the photocatalytic degradation of MCAA had increased. The best apparent degradation rate constant (0.0125 min^?1), which was higher than that on the pure TiO₂ film by a factor of 1.7, was obtained with the Ag(3%)/TiO₂ photocatalyst. The effect of doping level of vanadium acetylacetonate on the photocatalytic efficiency of the V‐doped TiO₂ was determined. CONCLUSIONS: Transition metal ion‐doped TiO₂ thin films showed significant absorption in the visible region. The metal doped TiO₂ photocatalyst (with an appropriate amount of V, Zr and Ag) on the Hg‐EDLs increased the degradation efficiency of MCAA in a microwave field. Copyright © 2009 Society of Chemical Industry     

Coupling copper and hydrogenated TiO2 to bare TiO2 structures for improved photocatalytic performance

Coupling of metals and hydrogenated TiO₂ (HT) to bare TiO₂ may improve synergistically the photocatalytic activity of TiO₂ for pollutant decomposition. Herein, we address this issue by investigating the photocatalytic performances of Cu‐loaded HT (CuHT)/bare TiO₂ (CuHTT) heterojunction nanocomposites for the degradation of harmful n‐butanol under simulated solar light illumination. CuHTT with a CuHT‐to‐TiO₂ composition ratio of 0.1 showed a photocatalytic efficiency exceeding those of four reference photocatalysts, exhibiting the advantages of improved visible light absorption efficiency, charge carrier separation, and adsorption capacity. Increasing the CuHT‐to‐TiO₂ ratio from 0.01 to 0.1 improved the photocatalytic efficiency of CuHTT, whereas a further increase to 0.9 resulted in a decreased photocatalytic efficiency. Moreover, the photocatalytic efficiency improved as relative humidity increased from 20% to 70%, decreasing upon its further increase to 95%. The efficiencies of n‐butanol to CO₂ conversion over CuHTT were lower than the corresponding decomposition efficiencies. Incompletely oxidized CO and three organic vapors (butanal, propanal, and 1‐propanol) were determined as major intermediates. A possible mechanism for CuHTT‐catalyzed photodegradation under simulated solar illumination was proposed.     

Photocatalytic activity of TiO2 nanotube layers coated with Ag and Pt

Abstract

Abstract

Thin films of anatase TiO₂ nanotube arrays (TiO₂ NTs) were prepared in this study. Pt and Ag were coated on the TiO₂ NTs films, which intend to increase the photocatalytic activity under ultraviolet-visible (UV-vis) irradiation. The phase and structure of the films were investigated by X-ray diffraction and scanning electron microscopy. Photocatalytic activity was tested by UV-vis absorption spectroscopy and showed that UV-vis light absorption of the films was remarkably improved by coated Ag and Pt by 72% and 183% respectively. The photocatalytic activities of the films towards degraded methyl orange and HCHO were compared and were all found to follow the sequence Pt/TiO₂ NTs>Ag/TiO₂ NTs>TiO₂ NTs. It was also found that the kinetics of HCHO photocatalytic degradation by the films fits the first order reaction model better and has higher efficiency than that of the methyl orange photocatalytic degradation by the same films.     

Hydrothermal synthesis of titanium dioxide using acidic peptizing agents and their photocatalytic activity

We have prepared TiO₂ nanoparticles by the hydrolysis of titanium tetraisopropoxide (TTIP) using HNO₃ as a peptizing agent in the hydrothermal method. The physical properties of nanosized TiO₂ have been investigated by TEM, XRD and FT-IR. The photocatalytic degradation of orange II has been studied by using a batch reactor in the presence of UV light. When the molar ratio of HNO₃/TTIP was 1.0, the rutile phase appeared on the titania and the photocatalytic activity decreased with an increase of HNO₃ concentration. The crystallite size of the anatase phase increased from 6.6 to 24.2 nm as the calcination temperature increased from 300 °C to 600 °C. The highest activity on the photocatalytic decomposition of orange II was obtained with titania particles dried at 105 °C without a calcination and the photocatalytic activity decreased with increasing the calcination temperature. In addition, the titania particles prepared at 180 °C showed the highest activity on the photocatalytic decomposition of orange II. This paper was prepared at the 2004 Korea/Japan/Taiwan Chemical Engineering Conference held at Busan, Korea between November 3 and 4, 2004.     

Effect of Pt loading and calcination temperature on the photocatalytic hydrogen production activity of TiO2 microspheres

TiO₂ microspheres were synthesized by hydrothermal reaction using Ti(OBu)₄ as the precursor. In order to enhance the efficiency of water splitting by the TiO₂ microspheres, Pt-modified TiO₂ microspheres were prepared by the impregnation-reduction method. The diameter of TiO₂ microspheres is around 5–10 μm. The photocatalytic performances of the catalysts were measured by hydrogen generation from a mixture of water and methanol under UV light irradiation. The photocatalytic activity of the TiO₂ microspheres was remarkably enhanced by loading Pt. The optimal Pt loading is 1.2 wt%. Pt/TiO₂ microspheres exhibit about 125 times greater H₂ production rate than the unmodified TiO₂ microspheres. The effect of calcination temperature on photocatalytic activity of the TiO₂ microspheres was also investigated.     

Phorate degradation by TiO2 photocatalysis: Parameter and reaction pathway investigations

The photocatalytic degradation of phorate in aqueous suspensions was examined with the use of titanium dioxide (TiO₂) as a photocatalyst. About 99% of phorate was degraded after UV irradiation for 60 min. The photodegradation of phorate followed pseudo-first-order kinetics and parameters such as pH of the system, TiO₂ dosage, and presence of anions were found to influence the reaction rate. To obtain a better understanding of the mechanistic details of this TiO₂-assisted photodegradation of phorate with UV irradiation, the intermediates of the processes were separated, identified, and characterized by the solid-phase microextraction (SPME) and gas chromatography/mass spectrometry (GC/MS) techniques. The probable photodegradation pathways were proposed and discussed. To the best of our knowledge, this is the first study that reports the degradation pathways of phorate. The electrical energy consumption per order of magnitude for photocatalytic degradation of phorate was also calculated and showed that a moderated efficiency (E_EO = 96 kWh/(m³ order)) was obtained in TiO₂/UV process.     

Photocatalytic performance of plasma sprayed Pt-modified TiO2 coatings under visible light irradiation

Plasma sprayed Pt/TiO₂ coatings were prepared by Atmospheric Plasma Spraying process. As-sprayed coatings were characterized by TEM, XRD and XPS. The photocatalytic performance was evaluated through the photo mineralization of methylene blue. All the Pt modified titanium dioxide coatings show significant absorption in the visible light range, while the pure titania coating reflects almost all the visible light. The photocatalytic efficiencies of as-sprayed pure TiO₂ coating and Pt/TiO₂ coatings are almost same under the irradiation of visible light. However, the efficiencies of all Pt/TiO₂ coating are greatly improved comparing with that of pure TiO₂ coating by applying 15 V external bias under the irradiation of visible light.     

Photodegradation behavior of the polycarbonate/TiO2 composite films under the UV irradiation in ambient air condition

Photocatalytic degradation mechanism of the polycarbonate(PC)/TiO₂ composite films was studied under the ambient air condition in order to investigate the feasibility of the PC/TiO₂ composite as a photodegradable polymer. TiO₂ composition in the PC/TiO₂ composite was changed from 0 wt% to 4 wt%. Photodegradation behaviors of the composite films were compared with that of the pure PC films by performing the weight loss monitoring under UV irradiation, FTIR spectroscopy, color measurement analysis, SEM, and XPS analysis. The weight loss rate of the PC/TiO₂ composite film (33% weight loss after 300 h) with 4 wt% TiO₂ was twice as high as the pure PC films (14% weight loss after 300 h). The increase in the FTIR hydroxyl peak, and carbonyl peak intensity and the yellowing observation during the photodegradation were due to the formation of the photoproducts (aliphatic, aromatic chain‐ketones, aromatic, and OH radical) and the structural modification of polycarbonate. XPS analysis of composite film showed the photodegradation of the polymer surface and TiO₂ particles exposure on the surface of the composite films matrix. POLYM. COMPOS., 36:1462–1468, 2015. © 2014 Society of Plastics Engineers     

Effect of Pt or Pd doping on stability of TiO2 nanoparticle suspension in water

Stability of suspensions of TiO₂ nanoparticles synthesized by the flame aerosol reactor (FLAR) could be altered by doping TiO₂ nanoparticles with Pt, Pd, or Pt–Pd dopants. It was found that doping of TiO₂ with Pd or Pt could contribute to the control of the agglomeration of TiO₂ suspended in water. With the change of doping content, the isoelectric point (IEP) of stable TiO₂ suspension decreased gradually from 5 to 3.6 while the specific surface area was increased from 43.27 to 60.84 m²/g. With pH > 6.0, 2 wt% Pt–Pd/TiO₂ suspension exhibited the lowest agglomeration behavior. The plausible intrinsic structures of Pt, Pd, and Pt–Pd doped TiO₂ nanoparticles were proposed and discussed with respect to their IEP based on the DLVO theory.