共查询到20条相似文献,搜索用时 982 毫秒
1.
基于小波神经网络的非线性系统预测控制研究 总被引:1,自引:0,他引:1
提出了一种基于小波基函数神经网络的未知非线性系统的一步超前预测控制算法。该方法利用小波网络学习这个非线性系统,并且应用小波神经网络模型作为系统的预测模型,控制信号直接通过极小化期望输出值与预测输出值之间的偏差来获得,通过对一非线性系统的仿真,表明了该方法的有效性。 相似文献
2.
3.
采用Brent优化的核学习单步预测控制算法 总被引:3,自引:2,他引:1
针对非线性SISO系统, 提出一种基于核学习辨识模型的单步预测控制算法(kernel learning one-step-ahead predictive control, KLOPC). 通过KL辨识模型得到系统的一步超前预报值, 并引入输出反馈和偏差校正以克服模型失配等因素引起的预测误差, 以此构造一步加权预测控制性能指标, 然后采用Brent一维搜索方法求取控制律. 该方法无需任何相关的导数信息, 需调整的参数少, 求解效率高. 在一非线性液位系统的仿真研究表明了KLOPC优于整定的PID和其它基于KL模型的控制方法, 对噪声和扰动等均具有更好的鲁棒性和自适应性. 相似文献
4.
基于Elman网络的非线性系统神经元自适应预测控制 总被引:5,自引:0,他引:5
提出在非线性系统的E1man网络辨识模型的基础上,用单神经元设计预测控制器的方案。Elman网络在BP网络的基础上,加入反馈信号,利用内部状态反馈来描述系统的非线性动力学行为,提高了学习速度,适合于动态系统的实时辨识。神经元结构简单,且有很强的自学习和自适应能力,它根据系统的期望输出与一步超前预测输出之间的偏差,并通过某种特定的学习算法在线调整控制器的参数,使控制器能够适应对象参数的变化,从而实现对一类非线性系统的有效控制。仿真实验证明了该方案的有效性。 相似文献
5.
为了提高迭代学习控制方法在间歇过程轨迹跟踪问题中的收敛速度,本文将批次间的比例型迭代学习控制与批次内的模型预测控制相结合,提出了一种综合应用方法.首先根据间歇过程的线性模型,预测出比例型迭代学习控制的系统输出,然后在批次内采用模型预测控制,通过极小化一个二次型目标函数来获得控制增量.该方法可使系统输出跟踪期望轨迹的速度比比例型迭代学习控制方法更快些.最后通过仿真实例验证了该方法的有效性. 相似文献
6.
7.
8.
非匹配不确定系统的显式反步变结构控制 总被引:1,自引:0,他引:1
研究非线性多输入多输出不确定系统在非匹配条件下的鲁棒输出跟踪问题,基于相对阶的假设,给出了多输入多输出不确定系统的标准型,进而结合反步设计方法和变结构控制方法,提出一种非匹配条件下非线性不确定系统鲁棒输出跟踪问题的显式反步变结构控制器设计方法,所给跟踪算法不仅只由不确定性的变化范围直接确定,而且有效地克服了现有反步设计算法因隐式递推关系和复杂偏导数计算给实时控制带来的困难。 相似文献
9.
10.
一种基于神经网络的鲁棒型预测控制算法 总被引:2,自引:0,他引:2
针对复杂工业过程中存在的时滞、强干扰的严重非线性控制对象,仿真研究了一种利用神经网络作为预测模型,遗传算法作为滚动优化策略的预测控制方法.在算法中为了提高辨识非线性系统的鲁棒性以及降低控制器对未建模动态的敏感性,引入了一种伪模型,即将系统实际输出与预测输出综合成的新的输出信号,由该信号代替量测输出.仿真结果表明对于非线性被控对象该方法具有良好的鲁捧性和跟踪性能,对于改善非线性预测控制不失为一种有益的尝试. 相似文献
11.
智能厂房温湿度控制系统 总被引:4,自引:0,他引:4
首先分析了厂房温湿度控制与一般建筑物空调系统的区别,指出现在流行的空调控制方法不适合厂房温湿度控制;接着提出一种智能温度控制方法,它不需要确定系统的数学模型,用专控制的方法,在不同控制阶段分别采用开关控制,模糊控制和智能PID控制;最后介绍了实行结果。 相似文献
12.
This article presents a novel three-loop control system, which supplements control structures known from the literature as model following control (MFC). The major advantage of the proposed system is its high robustness to process parameter variations; it is much higher than that offered by single-loop or two-loop control systems. Features of the new structure are revealed by a theoretical analysis that has been carried out from the viewpoint of requirements for a force/pose controller of a Stäubli RX60 manipulator. This article shows how the proposed control structure responds to such strong process parameter variations and makes a comparison to results yielded by single-loop control structures. 相似文献
13.
模型跟踪广义预测鲁棒自适应控制器 总被引:4,自引:1,他引:4
本文采用滤波CARMA模型,基于内模原理,提出了一种新的广义预测鲁棒自适应控制器,并分析了闭环系统性能,在新的控制器中,引入适当的前馈作用,使得跟踪和调节问题解耦,利用部分状态跟踪、模型参考以及极点配置方法解决跟踪问题,利用多步预测滚动优化方法解决调节问题;适当选择滤波器可以保证对平稳随机扰动有满意的响应,减少可调参数对闭环系统响应的影响,增强系统对未建模动态的鲁棒性,仿真结果表明:该控制器对确定性和非平稳随机扰动具有不变性,对系统时延和阶次变化具有鲁棒性,适用于非最小相位和开环不稳定系统。 相似文献
14.
一种专家智能控制器的仿真研究 总被引:1,自引:0,他引:1
该文提出一种专家智能控制器(简称为EI控制器).该控制器的参数可基于专家知识和过程参数的变化实时进行调整。仿真结果表明对于工业过程中的大纯滞后、非线性、变参数特性能获得较为满意的调节效果。 相似文献
15.
16.
An approach to the synthesis of control laws stabilizing motion and force in contact tasks, based on the exponential stability of the closed-loop control system, is described. When using the synthesized control laws, simultaneous stabilization of both motion and force is achieved with a preset quality of the transient responses. The task is solved in a most general form, taking into account the constraints on robot control, its position and the force of interaction of the robot and the environment, and the external perturbations and inaccuracies of the measuring sensors, when the environment dynamics is being described by nonlinear second-order differential equation, and the robot dynamics includes the third-order equations of the robot actuators dynamics. 相似文献
17.
对于具有较大时滞,非线性和时变性特点的打样机对象(它是印染行业中的一种小型设备),常规PID控制方法往往难以达到良好的控制效果.本文将专家控制器与常规PID控制器相结合,提出了一种智能控制器结构.试验表明,与常规PID控制器相比,该控制器的控制精度有了明显的提高. 相似文献
18.
19.
Jorge Diaz-Salgado Jesus Alvarez Alexander SchaumJaime A. Moreno 《Journal of Process Control》2012,22(1):303-320
The robust feedforward (FF) output-feedback (OF) control problem of (possibly open-loop unstable) continuous exothermic jacketed reactors with isotonic kinetics with respect to reactant concentration is considered. The volume, temperature, and concentration must be regulated by manipulating the feed, exit and coolant flowrates on the basis of volume and temperature measurements. The problem is addressed as an interlaced controller-observer design within a constructive control framework. The result is a quasi linear-decentralized (qLD) FF-OF dynamic controller which: (i) recovers (up to observer convergence) the behavior of a robust nonlinear FF-SF controller, (ii) has closed-loop stability conditions coupled with conventional-like tuning guidelines, and (iii) constitutes an add-on to the PI control scheme commonly employed in industrial reactors. The approach is tested with an open-loop unstable reactor example through simulations. 相似文献
20.
Juan Garrido Francisco Vázquez Fernando Morilla 《International journal of systems science》2016,47(5):1054-1072
This paper presents a new methodology to design multivariable proportional-integral-derivative (PID) controllers based on decoupling control. The method is presented for general n × n processes. In the design procedure, an ideal decoupling control with integral action is designed to minimise interactions. It depends on the desired open-loop processes that are specified according to realisability conditions and desired closed-loop performance specifications. These realisability conditions are stated and three common cases to define the open-loop processes are studied and proposed. Then, controller elements are approximated to PID structure. From a practical point of view, the wind-up problem is also considered and a new anti-wind-up scheme for multivariable PID controller is proposed. Comparisons with other works demonstrate the effectiveness of the methodology through the use of several simulation examples and an experimental lab process. 相似文献