共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
以天津钢铁有限公司炼钢厂4#板坯连铸机为应用背景,结合炼钢厂4#板坯连铸热电偶在结晶器中的实际埋设情况,对4#板坯连铸的漏钢预报系统进行了软件部分的理论分析和现场应用研究,从而实现了提高4#板坯连铸机漏钢预报系统的预报准确率和及时性的目的. 相似文献
3.
4.
通过对板坯连铸机结晶器液压伺服振动系统液压伺服油缸压力及活塞行程的检测,并应用结晶器伺服液压振动系统的运动方程,确定结晶器与连铸坯坯壳之间的摩擦力,找出该摩擦力在漏钢前的变化特征,用来预报粘结、裂纹及异物卷入漏钢,有效减少漏钢事故的发生。 相似文献
5.
6.
基于板坯连铸机生产中的结晶器摩擦力异常数据的分析结果,开展了结晶器摩擦力应用方法的研究.应用BP神经元网络与斜坡、脉冲等辅助判据相结合的方法进行结晶器摩擦力异常预报,并开发出结晶器摩擦力异常分析软件.应用该软件对现场实时记录的结晶器摩擦力数据进行预报仿真,预报结果与实际生产中的异常记录基本吻合.结果表明该软件可以对漏钢、水口断裂、液面波动等引起的结晶器摩擦力异常做出较准确的判断,与测温系统相比,结晶器摩擦力在某些漏钢事故发生时能提前做出反应,在异常预报等方面显示出明显的应用潜力. 相似文献
7.
河北钢铁集团燕山钢铁有限公司炼钢二厂2号板坯连铸机使用的漏钢预报系统,是重庆赛迪冶炼装备系统集成工程技术研究中心有限公司为该厂开发的结晶器智能管理系统的子系统,该系统基于热电偶测温,采用逻辑判断和神经网络方法进行漏钢预报。系统投入使用后,多次避免了漏钢事故的发生,对稳定生产起到了较大的推动作用。根据系统在现场的使用情况,分析应用效果并提出改善措施。实践证明,采取改善措施后,漏钢预报的准确度大大提高。 相似文献
8.
对目前南钢板坯连铸机漏钢事故的现状及预防措施进行简要分析,重点介绍了南钢宽中厚板(卷)占3250mm板坯连铸机的漏钢预报系统。 相似文献
9.
基于逻辑判断的板坯漏钢预报系统研究 总被引:1,自引:0,他引:1
对结晶器铜板热电偶温度的4种不同信号模式进行了分析,发现应用模式下不同温度信号模式在传播速度和变化趋势上存在明显的差异。针对目前国内引进的板坯漏钢预报系统因无法调整其预报参数而造成的高漏报、误报率,利用VC++编程语言开发了可调整预报参数并可显示热相图的逻辑漏钢预报系统,并利用国内某厂的实际生产数据进行了实验。实验结果表明:该系统运行稳定,能够更有效地对浇铸过程中的漏钢事故和铸坯有关表面缺陷进行预报。 相似文献
10.
11.
文章介绍了对八钢四号板坯连铸机轻压下系统的技术改造和升级。使其除具备了全程动态轻压下功能外,并成功实现了生产过程中根据拉速、温度、钢种等变化随机调整压下位置降低改判率的上业化应用。生产实践表明:优化升级后在低拉速、开停机等情况下得到实现,整个压下过程平稳顺利,辊缝控制精度良好,实施轻压下时铸坯无内部裂纹生成。铸坯内部质量得以明显改善。 相似文献
12.
13.
14.
15.
16.
通过结合唐钢薄板坯连铸的生产实践,从钢水纯净度及温度、结晶器内钢水液位波动、锥度控制、设备状况、保护渣性能等几个方面分析薄板坯连铸粘结的机理和影响因素,并提出相应的预防措施,使粘结几率有较大幅度的降低。 相似文献
17.
18.
19.
《钢铁研究学报(英文版)》2014
In order to reduce the rate of breakout of slab caster, improve the operating rate and ensure the stability of the caster, measures including the tundish casting auto-start, the mold level automatic control system optimization, the SEN one-button automatic quick-change technology, the mold breakout forecast system optimization, the mold oscillation parameters optimization, the mold taper measurement optimization and the mold powder management have been adopted by a steel plant of WISCO. As a result, the breakout rate of slab caster was significantly reduced to be zero level in the first 3 years, which is a new record for all steelmaking plant in China. 相似文献
20.
Simulation of Argon Gas Flow Effects in a Continuous Slab Caster 总被引:4,自引:0,他引:4
Three-dimensional finite-volume-based numerical models of fluid, heat, and mass transport have been developed and applied
to help explain the complex inter-related phenomena of multiphase fluid flow, superheat dissipation, and grade intermixing
during the continuous casting of steel slabs. Gas bubbles are simulated using a continuum model, which calculates the volume
fraction and velocities of the gas, and its effect on the liquid flow. Turbulence has been incorporated using the standardK-ε turbulence model. Reasonable agreement has been achieved between predicted velocities and corresponding measurements and
observations in full-scale water models, both with and without gas injection. The effects of argon gas bubble injection on
flow-related phenomena are investigated with simulations of a typical steel slab caster. Argon bubbles alter the flow pattern
in the upper recirculation zone, shifting the impingement point and recirculation zones upward. The effect increases with
increasing gas fraction and decreasing bubble size. Argon injection also causes superheat to be removed higher in the caster,
moves the hot spot upward, lowers the peak heat flux, and increases heat extraction from the wide face and meniscus regions.
During a steel grade transition, argon injection slightly affects slab surface composition but has no effect on intermixing
in the slab interior. 相似文献