Microwave performance of InAlAs/InGaAs/InP MODFET's

Modulation-doped InAlAs/InGaAs/InP structures were grown by molecular beam epitaxy (MBE) and fabricated into FET's with excellent RF gain performance. The intrinsic transconductance was about 400 mS/mm at 300 K. Current gain cutoff frequencies of up to 26.5 GHz were obtained in 1-µm gate devices. Extremely small S12and large S21led to a very largef_{max}of 62 GHz. These results represent the best reported figures for 1-µm devices in this material system and slightly better than those obtained in recently developed pseudomorphic modulation-doped field effect transistors (MODFET's).     

InP/InAlAs/InGaAs quantum wires

Single InGaAs quantum wires and stacked InGaAs quantum wires with InAIAs barriers have been fabricated on V-grooved InP substrates by low pressure metal-organic chemical vapour deposition (MOCVD). We have found growth conditions where the InAIAs barrier exhibits a resharpening effect, similar to that of AlGaAs utilized for growth on GaAs substrates. The existence of structural and electronic quantum wires in the bottom of the grooves is proven.     

Microwave noise performance of InP/InGaAs heterostructure bipolartransistors

The authors report the first low-noise InP/InGaAs heterostructure bipolar transistor (HBT). Minimum noise figures of 0.46, 2.0, and 3.33 dB were measured at 2, 10, and 18 GHz, respectively. The noise performance of this InP/InGaAs HBT with an emitter size of 3.5×3.5 μm² is compared to that for FETs having a 1-μm gate length. The measured minimum noise figures agree well with calculated data using a modified Hawkins model. Broadband low-noise operation is observed because of the short transit time for injected nonequilibrium electrons to transverse the base and collector depletion region     

InGaAs(InAlAs)/InP和InP/InAlAs湿法选择腐蚀研究

介绍了两种选择腐蚀液对InGaAs(InAlAs)I/nP和InPI/nAlAs异质结构材料选择腐蚀的实验结果,重点介绍在InAlAs上面生长InP的湿法选择腐蚀,用HClH∶3PO4C∶H3COOH系列腐蚀液,InPI/nAlAs选择比大于300。InPI/nAlAs湿法选择腐蚀的结果可以很好应用到OEIC芯片制作中,并取得了较好的器件及电路结果。     

InGaAs（InAIAs）／InP和InP／InAIAs湿法选择腐蚀研究

介绍了两种选择腐蚀液对InGaAs（InAlAs）／InP和InP／InAlAs异质结构材料选择腐蚀的实验结果，重点介绍在InAlAs上面生长InP的湿法选择腐蚀，用HCl：H3PO4：CH3COOH系列腐蚀液，InP／InAlAs选择比大于300。InP／InAlAs湿法选择腐蚀的结果可以很好应用到OEIC芯片制作中，并取得了较好的器件及电路结果。     

Optical effect in InAlAs/InGaAs/InP MODFET

Analytical results have been presented for an optically illuminated InAlAs/InGaAs/InP MODFET with an opaque gate. Partial depletion of the active region is considered. The excess carriers due to photo generation are obtained by solving the continuity equation. The energy levels are modified due to the generation of carriers. The surface recombination effect has also been taken into account. The results of I-V characteristics have been compared under dark conditions, since under illumination experimental results are not available. The offset voltage, sheet concentration, I-V, and transconductance have been presented and the effect of illumination discussed     

InGaAs/InAlAs/InP collector-up microwave heterojunction bipolartransistors

Collector-up InGaAs/InAlAs/InP heterojunction bipolar transistors (HBTs) were successfully fabricated, and their DC and microwave characteristics measured. High collector current density operation (J_c>30 kA/cm²) and high base-emitter junction saturation current density (J₀>10^-7 A/cm²) were achieved. A cutoff frequency of f _t=24 GHz and a maximum frequency of oscillation f _max=20 GHz at a collector current density of J₀ =23 kA/cm² were achieved on a nominal 5-μm×10-μm device     

栅长90nm的晶格匹配InAlAs／InGaAs／InP HEMT

文章报道了90nm栅长的晶格匹配InP基HEMT器件。栅图形是通过80kV的电子束直写的,并采用了优化的三层胶工艺。器件做在匹配的InAlAs／InGaAs／InP HEMT材料上。当Vds=1．0V时,两指75μm栅宽器件的本征峰值跨导达到720ms／mm,最大电流密度为500mA／mm,器件的阂值电压为．0．8V,截止频率达到127GHz,最大振荡频率达到152GHz。     

Monolithic integration of InGaAs/InP DFB lasers and InGaAs/InAlAs MQW optical modulators

The first successful monolithic integration of InGaAsP/InP distributed feedback (DFB) lasers and InGaAs/InAlAs multiple quantum well (MQW) optical modulators using LPE (liquid phase epitaxy)/MBE (modlecular beam epitaxy) hybrid growth reported. A 14% light output modulation is observed in this integrated device.     

Charge storage in InAlAs/InGaAs/InP floating gate heterostructures

Charge retention in floating gate InAlAs/InGaAs/InP field effect transistors is limited by lateral electron motion along the storage channel, a different direction for motion than found for AlAs/GaAs devices. Storage times as a function of temperature for the InP based alloy devices are reported and compared with similar AlAs/GaAs devices by using Poisson equation models.<>     

High performance double-doped InAlAs/InGaAs/InP heterojunction FET with potential for millimetre-wave power applications

Lattice matched InAlAs/InGaAs/InP heterojunction field-effect transistors (HJFETs), which have carrier supplying layers on and beneath the undoped InGaAs channel layer, have been successfully fabricated. A selective recess of the InGaAs channel edge at a mesa sidewall together with the use of a wide recess gate structure leads to a 5.7 V gate-drain breakdown voltage without kink effects. The fabricated HJFET with a 0.15*100 mu m/sup 2/ T-shaped gate exhibits a 700 mA/mm maximum drain current, a voltage gain of 14, and a 345 GHz maximum frequency of oscillation.<>     

Admittance spectroscopy of ring diode InGaAs/InAlAs/InP quantum-well structures

The admittance of ring planar diode Au/InGaAs/InP and Au/InGaAs/InAlAs heteronanostructures on i-InP has been studied. The structures are constituted by a silicon ??-doped layer and an InGaAs quantum well (QW) in InP or InAlAs epitaxial layers. An analysis of the capacitance-voltage and conductance-voltage characteristics yielded distribution profiles of the electron concentration and mobility in the vicinity of the QW and ??-doped layer. It is shown that lowering the temperature leads to an increase in the electron concentration and mobility in the QW.     

InAlAs/InGaAs/InP HFET with suppressed impact ionization usingdual-gate cascode-devices

InAlAs/InGaAs dual-gate-HFETs (DGHFETs) and single-gate-HFETs (SGHFETs) have been fabricated and characterized with special emphasis on reducing the impact ionization. For the first time it is shown that in the case of the DGHFET, due to the second gate (V_G2S=0 V), impact ionization can be totally prevented in the channel underneath the RF-driven gate without reduction of the RF-relevant parameters such as transconductance, output resistance and voltage gain. The electric field and the potential distribution in the channel are discussed using a nomogram and confirmed by 2-D simulation. According to V_G2S=0 V, a new cascode design is presented by directly connecting the second gate to the source (ground)     

Design, fabrication, and performance of high-speed monolithicallyintegrated InAlAs/InGaAs/InP MSM/HEMT photoreceivers

A detailed study of the performance of monolithically integrated photoreceivers based on metal-semiconductor-metal (MSM) photodetectors (PD's) and HEMT's is undertaken. Two different stacked-layer approaches to integrating MSM-PD's with HEMT's are investigated, and the performance of detectors and HEMT's for each approach is compared. The structure with the MSM layers grown on top of the HEMT layers exhibited the best overall performance. A physics-based MSM model is developed and incorporated into microwave circuit design software; excellent agreement between circuit simulations and measured frequency responses is demonstrated. To evaluate the effects of MSM electrode geometry and detector area on photoreceiver performance, photoreceivers with MSM interelectrode spacings of 1, 1.5, and 2 μm were fabricated and characterized. The electrical amplifier used in the photoreceivers is a two-stage, variable-transimpedance amplifier with a common-gate HEMT as the feedback path. By adjusting the DC voltage applied to the gate of this feedback HEMT, transimpedances ranging from 55.8 to 38.1 dBΩ, with corresponding -3 dB cutoff frequencies from 6.3 to 18.5 GHz, were measured experimentally. Excellent noise performance has been measured, with average input noise current spectral densities of 7.5, 8, and 12 pA/Hz^1/2 obtained for bandwidths of 6.3, 8, and 13.7 GHz, respectively. A packaged receiver has been tested at 5 Gb/s and an open eye pattern obtained     

Intermodulation analysis of the collector-up InGaAs/InAlAs/InP HBTusing Volterra series

The intermodulation (IM) distortion of the collector-up InGaAs/InAlAs/InP heterojunction bipolar transistor (HBT) is analyzed using Volterra-series theory. A T-equivalent circuit is used for this analysis. The contribution and interaction of four nonlinear elements: base-emitter resistance, base-emitter capacitance, base-collector capacitance, and common base-current gain are analyzed. For the particular device under investigation, it is found that the cancellation effect is not significant and the base-emitter resistance nonlinearity dominates the third-order IM     

InAlAs/InGaAs/InP HEMT欧姆接触研究

应用Au/Ge/Ni系金属在InAlAs/InGaAs/InP HEMT上成功制作了良好的合金欧姆接触。采用WN和Ti双扩散阻挡层工艺优化欧姆接触,在样品上获得了最低9.01×10-8Ω.cm2的比接触电阻,对应的欧姆接触电阻为0.029Ω.mm。同时,在模拟后续工艺环境的20min250°C热处理后,器件的欧姆接触性能无显著变化,表明其具有一定的温度稳定性。     

Low-conductance drain (LCD) design of InAlAs/InGaAs/InP HEMT's

The concepts of the low-conductance drain (LCD) design approach for lattice-matched InAlAs/InGaAs/InP HEMTs are demonstrated for improved device performance. The tradeoff for LCD HEMT characteristics is a tapered current gain cutoff frequency f_t under high drain-to-source bias. This behavior is, in principle, due to the fact that the LCD approach increases the effective gate length of the HEMTs in exchange for reduced peak channel electric field. Two-dimensional PISCES simulation was used to optimize the improvements while simultaneously minimizing this undesirable effect for an LCD HEMT structure     

Extremely high gain 0.15 mu m gate-length InAlAs/InGaAs/InP HEMTs

High electron mobility transistors (HEMTs) based on the InAlAs/InGaAs heterojunction grown lattice matched to InP were fabricated with 0.15 mu m T-shaped gates. The use of an undoped InGaAs cap layer in the epitaxial structure leads to excellent gate characteristics and very high transistor gain. At 95 GHz, a maximum available gain of 13.6 dB was measured. A maximum frequency of oscillation f/sub max/ of 455 GHz was obtained by extrapolating from 95 GHz at -6 dB/octave. This is the best reported gain performance for any transistor.<>     

InGaAs/InGaAlAs/InAlAs/InP SCH-MQW laser diodes grown by molecular-beam epitaxy

InGaAs/InGaAlAs/InAlAs/InP separate-confinement hetero-structure-multiquantum-well (SCH-MQW) laser diodes have been fabricated by molecular-beam epitaxy (MBE), and room-temperature pulsed operation at 1.57 ?m has been achieved. This SCH-MQW laser is composed of InGaAs well layers, InGaAlAs quaternary barrier layers, and InAlAs and InP cladding layers.     

An 80-Gbit/s multiplexer IC using InAlAs/InGaAs/InP HEMTs

This paper describes the design and performance of an 80-Gbit/s 2:1 selector-type multiplexer IC fabricated with InAlAs/InGaAs/InP HEMTs. By using a double-layer interconnection process with a low-dielectric insulator, microstrip lines were designed to make impedance-matched, high-speed intercell connection of critical signal paths. The record operating data rate was measured on a 3-in wafer. In spite of the bandwidth limitation on the measurement setup, clear eye patterns were successfully observed for the first time. The obtained circuit speed improvement from the previous result of 64 Gbit/s owes much to this high-speed interconnection design