Effect of organoclays on the morphology and thermal expansion of PA6/SEBS alloy

The effect of organoclay on phase morphology development of PA6/SEBS alloys had been investigated. PA6/SEBS blends of various compositions, with and without the presence of exfoliated organoclay in the PA6 phase, were prepared and the morphology and thermal expansion of these blends were examined. The results suggested that at compositions where PA6 remains as the matrix domain, the presence of the organoclay had little or no effect upon the blends morphology, PA6/SEBS alloy with SEBS as the matrix could evolve from sea‐island to cocontinuous structure after 5 phr organoclay were added. Significant reduction in the coefficient of linear thermal expansion (CLTE) along theflow direction and furthermore improving the heat distortion temperature of the injection‐molded PA6/SEBS/organoclay ternary nanocomposites was observed due to the formation of a total stable and fine cocontinuous nanolayer structure. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Effects of maleated styrene–(ethylene‐co‐butene)–styrene on the morphology and mechanical and thermal properties of polystyrene/polyamide 1212 blends

Polystyrene (PS)/polyamide 1212 (PA 1212) blends were compatibilized with a maleated triblock copolymer of styrene–(ethylene‐co‐butene)–styrene (SEBS‐g‐MA). Scanning electron microscopy revealed that the addition of SEBS‐g‐MA was beneficial to the dispersion of PA 1212 in the PS matrix because of the reaction between them. The variation of the fraction of SEBS‐g‐MA in the blends allowed the manipulation of the phase structure, which first formed a sheetlike structure and then formed a cocontinuous phase containing PA 1212/SEBS‐g‐MA core–shell morphologies. As a result, the mechanical properties, especially the Charpy notched impact resistance, were significantly improved with the addition of SEBS‐g‐MA. Differential scanning calorimetry (DSC) data indicated that the strong interaction between SEBS‐g‐MA and PA 1212 in the blends retarded the crystallization of PA 1212. The heat distortion temperature of the compatibilized blends was improved in comparison with that of the unmodified blend, probably because of the apparent increase in the glass‐transition temperature with an increasing concentration of SEBS‐g‐MA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1354–1360, 2005     

Morphology evolution, crystalline orientation, and thermal expansion of PA6/SEBS blends with nanolayer networks

A blend of polyamide 6 (PA6) and styrene-ethylene/butylene-styrene (SEBS) with a co-continuous nanolayer network was fabricated by reactive compounding and subsequent injection molding. The nanostructured polymer alloy was found to exhibit an extremely low coefficient of linear thermal expansion (CLTE) in the flow direction, accompanied by a largely suppressed molding shrinkage. To clarify the influence of the microstructure on thermal expansion behavior, a systematic study of morphology evolution, crystalline orientation, and confined crystallization of the PA6/SEBS (60/40) blend was carried out by means of TEM, DMA, DSC and WAXD measurements. It was found that a lower viscosity of SEBS and the capability of in situ compatibility with PA6 enable a morphology evolution from a disordered co-continuous to droplet-continuous and, finally, to a nanolayer network structure. Multi-scale orientations take place during the injection molding process, and the large reduction of CLTE may originate from the high order microstructure in two aspects: (1) the rubber-deformation-induced orientation of PA6 crystalline in which the b-axis with a negative CLTE orients along the flow direction, and (2) the co-continuous orientation of the rubber and plastic nanolayers, of which the thermal expansion favors towards the normal direction.     

Investigation of modified SEBS‐based thermoplastic elastomers by temperature scanning stress relaxation measurements

Thermoplastic elastomers (TPEs) based on poly(styrene‐b‐ethylene/butylene‐b‐styrene) (SEBS), modified with poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE), were investigated by a new testing method. The development and characterization of TPEs with improved temperature and oil resistance is a current area of research to extend the applications of TPEs, especially in the automotive industry. Thermal scanning stress relaxation (TSSR) was used to investigate the relaxation behavior of compounds containing SEBS, blended with extender oil, various amounts of PPE and in some cases with a thermoplastic polymer. Polyamide 12 (PA12) or polypropylene (PP) were used as the thermoplastic component. TSSR measurements were applied to detect relaxation changes in the glass transition region of the polystyrene blocks mixed with PPE. It was shown that the glass transition temperature increased with addition of PPE to the compound up to a limit of approximately 150°C, which corresponded to a weight fraction of PPE in the polystyrene (PS)‐block of 0.5. The increased glass transition temperature lead to SEBS‐based thermoplastic elastomer compounds with improved upper service temperatures. Phase images obtained by atomic force microscopy showed that the addition of PPE results in an increase of hard phase dimension. The addition of a thermoplastic polymer improved the mechanical properties and temperature resistance, but naturally decreased the elasticity of the compounds. Compounds containing PA12 exhibited an improved oil resistance. POLYM. ENG. SCI., 45:1498–1507, 2005. © 2005 Society of Plastics Engineers     

Effect of poly [styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) and maleic anhydride‐grafted SEBS triblock copolymers in immiscible blends of (polyamide‐6)/polycarbonate: Morphology‐mechanical properties relationships

The effects of using maleated poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] triblock copolymer (SEBS‐g‐MAH) and unmodified SEBS (unSEBS) on the phase morphology and mechanical properties of immiscible polymer blends of polyamide‐6 (PA‐6) and polycarbonate (PC) are investigated. Different binary, ternary, and quaternary blends were prepared by using a Brabender® co‐rotating twin‐screw extruder. The weight ratio of unSEBS to SEBS‐g‐MAH was changed to probe the phase morphology and mechanical properties. The results revealed that the mechanical properties of (PA‐6)/PC/(unSEBS/SEBS‐g‐MAH) blends were considerably governed by the unSEBS to SEBS‐g‐MAH weight ratio. Morphological investigation based on the spreading coefficient concept confirmed the results of scanning electron microscopy, indicating encapsulation of unSEBS domains around the PC core‐forming component in the presence of reactive SEBS‐g‐MAH precursor. Moreover, larger unSEBS‐PC composite droplets appeared throughout PA‐6 matrix upon increasing the ratio of unSEBS to SEBS‐g‐MAH, until reaching a maximum value. In the case of the (PA‐6)/PC blend compatibilized with a 50/50 combination of unSEBS and SEBS‐g‐MAH, the highest mechanical properties, i.e., tensile strength, impact resistance, and strain at break, were achieved owing to compatibilizing effect of virgin and maleated SEBS constituents. J. VINYL ADDIT. TECHNOL., 21:245–252, 2015. © 2014 Society of Plastics Engineers     

Effect of melt flow on morphology and linear thermal expansion of injection‐molded ethylene–propylene–diene terpolymer/isotactic polypropylene blends

An ethylene–propylene–diene terpolymer/isotactic polypropylene blend with a structure of co‐continuous microlayers was fabricated by injection molding and was then investigated. The blend exhibited an extremely low coefficient of linear thermal expansion (CLTE) in the directions of the length and the width. As the thickness of the oriented portion increased, the CLTE was further reduced. The morphology of the co‐continuous microlayers and the thermal expansion behavior varied with the sampling positions on the injection‐molded sheets. To study the relationship between the morphology and the melt flow, the melt flow behavior during injection molding was simulated using Moldflow. Orientation of the microlayers was determined using shear flow. When the shear rate increased, the orientation state increased and the CLTE decreased. © 2015 Society of Chemical Industry     

Relationship between structure and properties in high‐performance PA6/SEBS‐g‐MA/(PPO/PS) blends: The role of PPO and PS

This work aimed at studying the role of poly(phenylene oxide) (PPO) and polystyrene (PS) in toughening polyamide‐6 (PA6)/styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (SEBS‐g‐MA) blends. The effects of weight ratio and content of PPO/PS on the morphology and mechanical behaviors of PA6/SEBS‐g‐MA/(PPO/PS) blends were studied by scanning electron microscope and mechanical tests. Driving by the interfacial tension and the spreading coefficient, the “core–shell” particles formed by PPO/PS (core) and SEBS‐g‐MA (shell) played the key role in toughening the PA6 blends. As PS improved the distribution of the “core–shell” particles due to its low viscosity, and PPO guaranteed the entanglement density of the PPO/PS phase, the 3/1 weight ratio of PPO/PS supplied the blends optimal mechanical properties. Within certain range, the increased content of PPO/PS could supply more efficient toughening particles and bring better mechanical properties. Thus, by adjusting the weight ratio and content of PPO and PS, the PA6/SEBS‐g‐MA/(PPO/PS) blends with excellent impact strength, high tensile strength, and good heat deflection temperature were obtained. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45281.     

Tribological behavior of polyamide 66‐based binary and ternary composites

Friction and wear characteristics of polyamide 66 (PA66) and the composites of organoclay modified by styrene–ethylene/butylene–styrene triblock copolymer grafted with 1.84 wt% of maleic anhydride (SEBS‐g‐MA) were studied using an Universal Micro Tribometer reciprocating friction and wear tester. The morphologies of the wear tracks of PA66 and the composites were observed using a scanning electron microscope. The results showed that plastic deformation induced by the traction of the harder steel ball occurred on the worn surfaces of PA66 and the composite which were reinforced by SEBS‐g‐MA copolymer. It was found that the average frictional coefficient and specific wear rate of PA66/SEBS‐g‐MA binary composite are lowest under the same conditions. This indicates that toughness and wear resistance of PA66 matrix are improved with the incorporation of SEBS‐g‐MA copolymer. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Tough polyamide 6/core–shell blends prepared via in situ anionic polymerization of ε‐caprolactam by reactive extrusion

In this study, the molten ε‐caprolactam (CL) solution of maleated styrene‐ethylene/butylene‐styrene block copolymer (SEBS‐g‐MA) and polystyrene (PS) containing catalyst and activator were introduced into a twin screw extruder, and polyamide 6 (PA6)/SEBS/PS blends were successfully prepared via anionic polymerization of CL by reactive extrusion. The mechanical properties measurements indicated that both the elongation at break and notched Izod impact strength of PA6/SEBS/PS (85/10/5) blends were improved distinctly with slight loss of tensile and flexural strength as compared to that of pure PA6. The images of transmission electron microscopy showed that a core–shell structure with PS core and poly (ethene‐co‐1‐butene) (PEB) shell was formed within the PA6 matrix. Fourier transform infrared was used to investigate the formation mechanisms of the core–shell structure. POLYM. ENG. SCI., 53:2705–2710, 2013. © 2013 Society of Plastics Engineers     

Fabrication and properties of carbon nanotube/styrene–ethylene–butylene–styrene composites via a sequential process of (electrostatic adsorption aided dispersion)‐plus‐(melt mixing)

Carbon nanotube (CNT)/styrene–ethylene–butylene–styrene (SEBS) composites were prepared via a sequential process of (electrostatic adsorption assisted dispersion)‐plus‐(melt mixing). It was found that CNTs were uniformly embedded in SEBS matrix and a low percolation threshold was achieved at the CNT concentration of 0.186 vol %. According to thermal gravimetric analysis, the temperatures of 20% and 50% weight loss were improved from 316°C and 352°C of pure SEBS to 439°C and 463°C of the 3 wt % CNT/SEBS composites, respectively. Meanwhile, the tensile strength and elastic modulus were improved by about 75% and 181.2% from 24 and 1.6 MPa of pure SEBS to 42 and 4.5 MPa of the 3 wt % CNT/SEBS composite based on the tensile tests, respectively. Importantly, this simple and low‐cost method shows the potential for the preparation of CNT/polymer composite materials with enhanced electrical, mechanical properties, and thermal stability for industrial applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40227.     

Preparation and performance characteristics of short‐glass‐fiber/maleated styrene–ethylene–butylene–styrene/polypropylene hybrid composites

Eighty/twenty polypropylene (PP)/styrene–ethylene–butylene–styrene (SEBS) and 80/20 PP/maleated styrene–ethylene–butylene–styrene (SEBS‐g‐MA) blends reinforced with 30 wt % short glass fibers (SGFs) were prepared by extrusion and subsequent injection molding. The influence of the maleic anhydride (MA) functional group grafted to SEBS on the properties of SGF/SEBS/PP hybrid composites was studied. Tensile and impact tests showed that the SEBS‐g‐MA copolymer improved the yield strength and impact toughness of the hybrid composites. Extensive plastic deformation occurred at the matrix interface layer next to the fibers of the SGF/SEBS‐g‐MA/PP composites during impact testing. This was attributed to the MA functional group, which enhanced the adhesion between SEBS and SGF. Differential scanning calorimetry measurements indicated that SEBS promoted the crystallization of PP spherulites by acting as active nucleation sites. However, the MA functional group grafted to SEBS retarded the crystallization of PP. Finally, polarized optical microscopy observations confirmed the absence of transcrystallinity at the glass‐fiber surfaces of both SGF/SEBS/PP and SGF/SEBS‐g‐MA/PP hybrid composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1303–1311, 2002     

Effect of transfer film on tribological behavior of polyamide 66‐based binary and ternary nanocomposites

BACKGROUND: In a polymer–metal sliding system, the formation and performance of the transfer film have important effects on the tribological behavior of the polymer. In order to reveal the wear mechanism of polyamide 66 (PA 66) and its composites consisting of styrene–(ethylene/butylene)–styrene triblock rubber grafted with maleic anhydride (SEBS‐g‐MA) particles and organoclay nano‐layers, the tribological behavior and transfer films of polyamide 66 and its composites were investigated under dry sliding. RESULTS: The incorporation of SEBS‐g‐MA rubber particles reduces the wear mass loss of PA 66, while the addition of organoclay nano‐layers increases the wear mass loss. The transfer films formed by neat PA 66 and PA 66/organoclay binary nanocomposite include a dark portion and bright portion. In the dark portion, the transfer film is thicker; in the bright portion, the steel ring surface is exposed. The transfer film formed by PA 66/SEBS‐g‐MA/organoclay ternary nanocomposite is thinner and more uniform than the transfer films formed by the other materials. CONCLUSION: When SEBS‐g‐MA rubber particles and organoclay nano‐layers are added simultaneously to PA 66, the wear resistance of PA 66 can be improved markedly. The main reason is that PA 66/SEBS‐g‐MA/organoclay ternary nanocomposite can form a thin and uniform transfer film on the steel ring surface. Copyright © 2008 Society of Chemical Industry     

Anomalous mechanical behavior upon recycling of poly(phenylene‐ether)‐based thermoplastic elastomer

Recycling of thermoplastic elastomers based on poly (phenylene ether) (PPE) was studied in detail. The quaternary blend comprising of styrene–ethylene–butylene–styrene (SEBS)/ethylene vinyl acetate (EVA)/PPE‐PS (polystyrene) showed improvement in mechanical properties upon recycling, which was correlated with the formation of crosslinked network in the system. Presence of crosslinked network was confirmed by the gel content analysis. The blend components involved in the crosslinking were evaluated by gel morphology analysis. Fourier transform infrared spectroscopy revealed the chemical composition of the crosslinked gel. Crosslinking mechanism was established based on the reactivity of allylic EVA radical during recycling. Rheological study supported the notion of crosslinking upon recycling that resulted in higher storage modulus (G′) as a manifestation of restrained flow by network formation. On the basis of the earlier data, a reaction mechanism for crosslinking was proposed. Finally, structure–property correlation was developed through morphological, chemical, and rheological analysis to understand the anomalous enhancement in mechanical properties upon recycling. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Rubber‐toughened PLA blends with low thermal expansion

In this study, poly (lactic acid) (PLA) blended with various rubber components, i.e., poly (ethylene‐glycidyl methacrylate) (EGMA), maleic anhydride grafted poly(styrene‐ethylene/butylene‐styrene) triblock elastomer (m‐SEBS), and poly(ethylene‐co‐octene) (EOR), was investigated. It was observed that EGMA is highly compatible due to its reaction with PLA. m‐SEBS is less compatible with PLA and EOR is incompatible with PLA. Electron microscopy (SEM and TEM) revealed that a fine co‐continuous microlayer structure is formed in the injection‐molded PLA/EGMA blends. This leads to polymer blends with high toughness and very low linear thermal expansion both in the flow direction and in the transverse direction. The microlayer thickness of rubber in PLA blends was found to play key roles in reducing the linear thermal expansion and achieving high toughness of the blends. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Morphology and mechanical properties of polyamide 12 blends with styrene/ethylene–butylene/styrene rubbers with and without maleation

Blends of polyamide 12 (PA12) with styrene/ethylene–butylene/styrene (SEBS) and maleic anhydride grafted SEBS (SEBS‐g‐MA) were prepared by twin‐screw extrusion and injection molding. The morphology, mechanical properties, and dynamic mechanical properties of the blends were studied. The morphology of the blends was evaluated from the etched surfaces of cryogenically fractured specimens with scanning electron microscopy. The morphological parameters showed that the PA12/SEBS‐g‐MA blends (PM series) exhibited a finer and more uniform rubber dispersion than the PA12/SEBS blends (PS series) because of the interfacial chemical reactions. SEBS functionalization via maleic anhydride grafting strongly affected the morphological parameters, such as the domain size, interfacial area per unit of volume, and critical interparticle distance, but the distribution of the rubber domains in the blends was less affected. Tensile and impact studies showed that the PS blends had worse mechanical properties than the PM blends. The tensile strength and elongation at break of the PM blends were considerably greater than those of the PS blends. The fracture toughness and energy values determined for notched Charpy specimens in high‐speed impact tests were markedly higher for the PM blends than for the PS blends. A similar observation was obtained from instrumented falling weight impact studies. Dynamic mechanical analysis confirmed the incompatibility of the blend components because the glass‐transition temperatures of PA12 and the rubber phase (SEBS and SEBS‐g‐MA) were not affected. © 2005 Wiley Periodicals, Inc. J Appl polym Sci 95: 1376–1387, 2005     

Melt rheology and properties of compatibilized recycled poly(ethylene terephthalate)/(styrene‐ethylene‐ethylene‐propylene‐styrene) block copolymer blends

Blends of recycled poly(ethylene terephthalate) (R‐PET) and (styrene‐ethylene‐ethylene‐propylene‐styrene) block copolymer (SEEPS) compatibilized with (maleic anhydride)‐grafted‐styrene‐ethylene‐butylene‐styrene (SEBS‐g‐MAH) were prepared by melt blending. The compatibilizing effects of SEBS‐g‐MAH were investigated systematically by study of the morphology, linear viscoelastic behavior, and thermal and mechanical properties of the blends. The results show that there is good agreement between the results obtained by rheological measurement and morphological analysis. The rheological test shows that the melt elasticity and melt strength of the blends increase with the addition of SEBS‐g‐MAH. The Cole‐Cole plots and van Gurp‐Palmen plots confirm the compatibilizing effect of SEBS‐g‐MAH. However, the Palierne model fails to predict the linear viscoelastic properties of the blends. The morphology observation shows that all blends exhibit a droplet‐matrix morphology. In addition, the SEEPS particle size in the (R‐PET)/SEEPS blends is significantly decreased and dispersed uniformly by the addition of SEBS‐g‐MAH. Differential scanning calorimeter analysis shows that the crystallization behavior of R‐PET is restricted by the incorporation of SEEPS, whereas the addition of SEBS‐g‐MAH improves the crystallization behavior of R‐PET compared with that of uncompatibilized (R‐PET)/SEEPS blends. The Charpy impact strength of the blends shows the highest value at SEBS‐g‐MAH content of 10%, which is about 210% higher than that of pure R‐PET. J. VINYL ADDIT. TECHNOL., 22:342–349, 2016. © 2014 Society of Plastics Engineers     

Rheological behaviors of glass bead‐ and wollastonite‐filled polypropylene composites modified with thermoplastic elastomers

Steady‐ and oscillatory‐shear rheological behaviors of polypropylene/glass bead (PP/GB) and PP/wollastonite (PP/W) melts modified with thermoplastic elastomers, poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) copolymer (SEBS) and the corresponding block copolymer grafted with maleic anhydride (SEBS‐g‐MA), were examined by means of a parallel‐plate rheometer. With adding the elastomers (SEBS and SEBS‐g‐MA) and fillers (spherical GB and acicular W) to PP, viscosity especially at low shear rates and shear‐thinning flow behavior at high shear rates were pronounced as evidenced quantitatively by Carreau–Yasuda (CY) parameters, but Cox–Merz analogy became weakened. Besides, melt‐elasticity in terminal region and relaxation time (t_c) in crossing point increased, indicating an enhancement in quasi‐solid behavior of molten PP. Comparing with the elastomers, rheological behaviors of molten PP were more influenced with adding the rigid fillers, especially with W due to distinct acicular shape of W particles. SEBS‐g‐MA elastomer more affected rheological behaviors of the ternary composites than SEBS elastomer, implying that SEBS elastomer and the filler particles behaved individually (i.e., development of separate microstructure) in (PP/GB)/SEBS and (PP/W)/SEBS ternary composites, but core‐shell microstructure developed with strong interfacial adhesion by adding SEBS‐g‐MA elastomer, and the filler particles encapsulated with the thick SEBS‐g‐MA elastomer interlayer (i.e., core‐shell particles) acted like neither big elastomer particles nor like individual rigid particles in melt‐state. Moreover, effects of SEBS‐g‐MA elastomer reached a maximum on rheological behaviors of (PP/W)/SEBS‐g‐MA ternary composite, indicating a synergy between core‐shell microstructure and acicular W particles. Correlations between oscillatory‐shear flow properties and microstructures of the blends and composites were evaluated using Cole–Cole (CC), Han–Chuang (HC), and van Gurp–Palmen (vGP) plots. COMPOS., 2012. © 2012 Society of Plastics     

Recycled poly(ethylene terephthalate)/linear low‐density polyethylene blends through physical processing

Poly(styrene‐ethylene/butylene‐styrene) (SEBS) was used as a compatibilizer to improve the thermal and mechanical properties of recycled poly(ethylene terephthalate)/linear low‐density polyethylene (R‐PET/LLDPE) blends. The blends compatibilized with 0–20 wt % SEBS were prepared by low‐temperature solid‐state extrusion. The effect of SEBS content was investigated using scanning electron microscope, differential scanning calorimeter, dynamic mechanical analysis (DMA), and mechanical property testing. Morphology observation showed that the addition of 10 wt % SEBS led to the deformation of dispersed phase from spherical to fibrous structure, and microfibrils were formed at the interface between two phases in the compatibilized blends. Both differential scanning calorimeter and DMA results revealed that the blend with 20 wt % SEBS showed better compatibility between PET and LLDPE than other blends studied. The addition of 20 wt % of SEBS obviously improved the crystallizibility of PET as well as the modulus of the blends. DMA analysis also showed that the interaction between SEBS and two other components enhanced at high temperature above 130°C. The impact strength of the blend with 20 wt % SEBS increased of 93.2% with respect to the blend without SEBS, accompanied by only a 28.7% tensile strength decrease. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Modification of tensile and impact properties of poly(butylene terephthlate) by incorporation of styrene‐ethylene‐butylene‐styrene and maleic anhydride‐grafted‐SEBS (SEBS‐g‐MA) terpolymer

Tensile behavior and impact strength of poly(butylene terephthlate) (PBT)/styrene‐ethylene‐butylene‐styrene (SEBS) copolymer blends were studied at SEBS volume fraction 0–0.38. Tensile modulus and strength decreased, whereas breaking elongation increased with SEBS content. Predictive models are used to evaluate the tensile properties. Strength properties were dependent on the crystallinity of PBT and phase adhesion. The normalized notched Izod impact strength increased with the SEBS content; at Φ_d = 0.38, the impact strength enhanced to five times that of PBT. Scanning electron microscopy was used to examine phase morphology. Concentration and interparticle distance of the dispersed phase influenced impact toughening. In the presence of maleic anhydride‐grafted SEBS (SEBS‐g‐MAH), the tensile modulus and strength decreased significantly, while normalized relative notched Izod impact strength enhanced to 7.5 times because of enhanced interphase adhesion. POLYM. ENG. SCI., 53:2242–2253, 2013. © 2013 Society of Plastics Engineers     

Blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 toughened by maleated polystyrene‐based copolymers: Mechanical properties,morphology, and rheology

Poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 (PPO/PA6 30/70) blends were impact modified by addition of three kinds of maleated polystyrene‐based copolymers, i.e., maleated styrene‐ethylene‐butylene‐styrene copolymer (SEBS‐g‐MA), maleated methyl methacrylate‐butadiene‐styrene copolymer (MBS‐g‐MA), and maleated acrylonitrile‐butadiene‐styrene copolymer (ABS‐g‐MA). The mechanical properties, morphology and rheological behavior of the impact modified PPO/PA6 blends were investigated. The selective location of the maleated copolymers in one phase or at interface accounted for the different toughening effects of the maleated copolymer, which is closely related to their molecular structure and composition. SEBS‐g‐MA was uniformly dispersed in PPO phase and greatly toughened PPO/PA6 blends even at low temperature. MBS‐g‐MA particles were mainly dispersed in the PA6 phase and around the PPO phase, resulting in a significant enhancement of the notched Izod impact strength of PPO/PA6 blends from 45 J/m to 281 J/m at the MBS‐g‐MA content of 20 phr. In comparison, the ABS‐g‐MA was mainly dispersed in PA6 phase without much influencing the original mechanical properties of the PPO/PA6 blend. The different molecule structure and selective location of the maleated copolymers in the blends were reflected by the change of rheological behavior as well. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010