In situ polymerization of polyimide‐based nanocomposites via covalent incorporation of functionalized graphene nanosheets for enhancing mechanical,thermal, and electrical properties

In this study, we report an effective method to fabricate high‐performance polyimide (PI)‐based nanocomposites using 3‐aminopropyltriethoxysilane functionalized graphene oxide (APTSi‐GO) as the reinforcing filler. APTSi‐GO nanosheets exhibit good dispersibility and compatibility with the polymer matrix because of the strong interfacial covalent interactions. PI‐based nanocomposites with different loadings of functionalized graphene nanosheets (FGNS) were prepared by in situ polymerization and thermal imidization. The mechanical performance, thermal stability, and electrical conductivity of the FGNS/PI nanocomposites are significantly improved compared with those of pure PI by adding only a small amount of FGNS. For example, a 79% improvement in the tensile strength and a 132% increase in the tensile modulus are achieved by adding 1.5 wt % FGNS. The electrical and thermal conductivities of 1.5 wt % FGNS/PI are 2.6 × 10^?3 S/m and 0.321 W/m·K, respectively, which are ～10¹⁰ and two times higher than those of pure PI. Furthermore, the incorporation of graphene significantly improves the glass‐transition temperature and thermal stability. The success of this approach provides a good rationale for developing multifunctional and high‐performance PI‐based composite materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42724.     

Graphene induced carbonization of polyimide films to prepared flexible carbon films with improving-thermal conductivity

Carbon films prepared by polyimide (PI) films treated under 1500°C exhibit favorable thermal conductivity. However, the bonds of carbon films will fracture and recombine which will cause shrinking and forming defects. The flexibility of the carbon films will be greatly reduced, and then affect the application of the carbon films in the field of thermal conduction. When the films prepared by the graphene oxide/polyimide (GO/PI) composite films and the reduced graphene oxide/polyimide (rGO/PI) composite films, respectively, rGO and GO can fill the defects, then increasing the flexibility of the carbon films and inducing the carbonation process. Because of the high thermal conductivity and the six-membered ring structure of rGO and GO, the carbonization temperature will decrease and save costs. When the composite films treated under 1500°C, the thermal conductivity increases with the content of rGO and GO. There are connections between PI and graphene. As the amount of rGO and GO increases, the strong interactions between the rGO or GO and PI lead to contact that enhances its thermal conductivity. However, the rGO and GO have different effects on the films flexibility and thermal conductivity and the differences will be described in the article.     

In situ Synthesis and mechanical,thermal properties of polyimide nanocomposite film by addition of functionalized graphene oxide

Polyimide (PI) and chemical modified graphene oxide nanocomposite films are prepared by in situ polymerization from solutions of pyromellitic dianhydride and 4,4′‐oxydianiline with various amount (0.5–2 wt%) of 3‐aminopropyltriethoxysilane (APTS) functionalized graphene oxide (GO) sheets in dimethylacetamide. The APTS functionalized GO (GO‐APTS) is a versatile platform for polymer grafting, improving excellent dispersion of GO in the PI matrix, and forming strong interaction with the PI matrix. The GO‐APTS/PI nanocomposites exhibited improvement in mechanical and thermal properties by addition of a small amount of GO‐APTS. With the addition of a small amount of GO‐APTS (1.5 wt%) to PI matrix, mechanical properties with the tensile strength and Young's modulus improved by 45% and 15%, respectively. The thermal analysis showed that the thermal stability of PI was slightly enhanced by the incorporation of GO‐APTS (1.5 wt%). This approach provides a strategy for developing high performance functionalized GO‐polymer composite materials. POLYM. COMPOS., 37:907–914, 2016. © 2014 Society of Plastics Engineers     

Novel polyimide/graphene oxide composite films with ultralow dielectric constants

Graphene is generally used for conductive material; it can also be used as a key nanofiller for the insulation material of inverter motors. In this study, a series of polyimide (PI) films were prepared successfully by a conventional two‐step polymerization method based on bis[3,5‐dimethyl‐4‐(4‐aminophenoxy)phenyl]methane as a diamine and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride as a dihydride with different weight percentage graphene oxide (GO) nanosheets as nanofillers. The dielectric constant (ε) and dielectric loss (tan δ) of these films were measured. The results show good dielectric properties, especially an ultralow ε value of 1.41 at 1 MHz with 0.19% GO. This showed that the low ε value was caused by a high free volume led by the GO nanosheets and the C? F bond. The structure and micromorphology of the PIs were characterized by X‐ray diffraction and scanning electron microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41385.     

Effects of crosslinking agents on the physical properties of polyimide/amino‐functionalized graphene oxide hybrid films

The effects of crosslinking agents (crosslinkers) on polyimide (PI)/graphene oxide (GO) hybrid films were extensively investigated. The surface of GO was modified with amino groups using 4‐aminobenzylamine to improve compatibility with pyromellitic dianhydride/4,4′‐oxydianiline PI, and two kinds of crosslinkers were used: tris(4‐aminophenyl)amine and 1,3,5‐triazine‐2,4,6‐triamine (melamine). The mechanical, thermal and optical properties of the PI hybrid films were investigated. In particular, the transparency and physical properties of the PI hybrid films containing amino‐functionalized GO with homogeneous dispersion were improved. As the content of the crosslinker increased, a crosslinking network was formed between the PI chains, and the stiffness of the hybrid films was increased. The glass transition temperature, heat resistance and mechanical properties were also enhanced. The PI hybrids prepared with a rigid crosslinker exhibited higher optical transparency due to the reduction of the intermolecular charge transfer interactions with increasing interchain spacing between the PI chains. © 2018 Society of Chemical Industry     

Synthesis and properties of click coupled graphene oxide sheets with three‐dimensional macromolecules

A facile click chemistry approach to the functionalization of three‐dimensional hyperbranched polyurethane (HPU) to graphene oxide (GO) nanosheets is presented. HPU‐functionalized GO samples of various compositions were synthesized by reacting alkyne‐functionalized HPU with azide‐functionalized GO sheets. The morphological characterization of the HPU‐functionalized GO was performed using transmission electron microscopy and its chemical characterization was carried out using Fourier transform‐infrared spectroscopy, nuclear magnetic resonance spectroscopy, and X‐ray photoelectron spectroscopy. The graphene sheet surfaces were highly functionalized, leading to improved solubility in organic solvents, and consequently, enhanced mechanical, thermal, and thermoresponsive and photothermal shape memory properties. The strategy reported herein provides a very efficient method for regulating composite properties and producing high performance materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43358.     

In situ preparation of transparent polyimide nanocomposite with a small load of graphene oxide

Polyimide (PI) nanocomposites with 4,4′‐bisphenol A dianhydride, 4,4′‐oxydiphthalic anhydride, and diaminodiphenyl methane (MDA) as comonomers and functionalized with graphene oxide (GO), were prepared by in situ polymerization. Only a small amount of GO (0.03–0.12 wt %) is added to improve the mechanical properties of PI and to avoid a substantial decrease of PI transparence. The nanocomposites are characterized by FTIR, X‐ray diffraction, thermogravimetric analysis, transmission electron microscope, tensile test, and UV‐vis spectroscopy. It is demonstrated that the PI/GO composite films possess transmittance of above 80% at wavelengths of 500–800 nm when the GO content is under 0.12 wt %, while the stress intensity and Young's modulus are improved by 29 and 25%, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Incorporation of silica network and modified graphene oxide into epoxy resin for improving thermal and anticorrosion properties

In this study, the silica network and functionalized graphene oxide (GO) were incorporated into the epoxy coating systems, which was aimed to improve the thermal property and corrosion resistance of epoxy coatings. First, tetraethyl orthosilicate (TEOS) oligomers and epoxy hybrid was fabricated through sol–gel method. Then the (3-aminopropyl) triethoxysilane (APTES) modified graphene oxide (FGO) was added into the epoxy hybrid composite to obtain anticorrosion coatings. Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), Raman spectrum, and X-ray photoelectron spectrum were conducted to evaluate the structural information of GO and APTES modified GO nanosheets. The results indicated that the APTES successfully grafted onto the surface of GO sheets. Besides, TGA curves, electrochemical measurements and salt spray test were also carried out to characterize the thermal performance and corrosion resistance of GO based epoxy coatings. The TGA results revealed that the thermal performance of epoxy coating containing silica network and FGO nanofiller (ES/FGO) was significantly strengthened compared to pure epoxy. The initial degradation temperature of epoxy coating was increased from 300 to 343.7°C after incorporation of silica component and FGO. The EIS measurements demonstrated that the impedance modulus of ES/FGO was significantly higher than neat epoxy, which indicated that the corrosion resistance of epoxy was substantially strengthened after introduction of silica component and FGO. The corrosion rate and inhibition efficiency of epoxy composite coatings were also shifted from 1.237 × 10⁻⁷ mm/year and 76.6% (for neat epoxy) to 1.870 × 10⁻⁹ mm/year and 99.6% (for ES/FGO), respectively. The salt spray test also revealed that the silica and FGO can improve the corrosion resistance of epoxy coating. Additionally, the dispersion of GO sheets was also enhanced after the modification of APTES siloxane.     

Enhanced mechanical and electrical properties of polyimide film by graphene sheets via in situ polymerization

In this study, polyimide/graphene nanocomposite films which exhibited significant enhancements in mechanical properties and electrical conductivity were successfully fabricated. Graphene oxide (GO) synthesized by Hummer’s method was chemically modified with ethyl isocyanate to give ethyl isocyanate-treated graphene oxide (iGO), which is readily dispersed in N,N′-dimethylformamide (DMF). The iGO dispersion in DMF was then used as media for synthesis of polyimide/functionalized graphene composites (PI/FGS) by an in situ polymerization approach. It was shown that addition of only 0.38 wt% of FGS, Young’s modulus of the PI/FGS composite film was dramatically increased from 1.8 GPa to 2.3 GPa, which is approximately 30% of improvement compared to that of pure PI film, and the corresponding tensile strength was increased from 122 MPa to 131 MPa. In addition, the electrical conductivity of the PI/FGS with this graphene content was increased by more than eight orders of magnitude to 1.7 × 10⁻⁵ S m⁻¹.     

High strength polyimide fibers with functionalized graphene

Graphene possesses unprecedented physical and chemical properties and has been thought to be ideal filler for reinforcing fibers' mechanical properties. However, graphene is difficultly dispersed in polymer which severely restrict to prepare high-strength and high-modulus composites. In this work, we report an effective method to fabricate a kind of organ-soluble polyimide (PI)/graphene composite fiber using in situ polymerization. Graphene oxide (GO) is modified by 4,4′-diaminodiphenyl ether (ODA) to obtain the GO-ODA nanosheets which exhibit excellent dispersibility and compatibility with the organ-soluble PI matrix. WAXD results show that these 2D nanosheets have a significant influence on the crystallization, aggregation or assembly behaviors of the polymer chains. The PI/graphene composite fiber containing 0.8 wt% of GO-ODA presents a tensile strength of 2.5 GPa (1.6 times higher than the pure PI fiber), and tensile modulus of 126 GPa (223% raises compared with pure PI fiber). Furthermore, the incorporation of graphene significantly improves the glass transition temperature and thermal stability of the composite fibers. Thanks to the excellent hydrophobic properties of graphene, the hydrophobic behavior of the composite fibers is greatly improved. This effective approach shows a potential application in fabricating multifunctional polymer-based composite fibers.     

Functionalized graphene‐reinforced rubber composite: Mechanical and tribological behavior study

A functionalized graphene, fluorinated graphene nanosheets (FGS), and SiO₂ nanoparticles as reinforcing fillers were employed to improve the mechanical properties of the solution styrene butadiene and butadiene rubber composites (SSBR‐BR). The results showed that the mechanical properties of SSBR‐BR composite filled with FGS were substantially improved than those of the unfilled and equivalent filler loaded graphene oxide (GO) and reduced graphene oxide (rGO) filled SSBR‐BR composites. It can be ascribed to the fact that the hydrophobic surface of FGS can be endowed the good dispersion in rubber matrix and stronger interfacial interaction between rubber and fillers. The tribological properties of these composites are also investigated. The results reveal that incorporation of GO, rGO, and FGS in SSBR‐BR composites can decrease antiwear properties because the existence of layered graphene promotes to tear and peel off. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44970.     

Polyimide nanohybrid films with electrochemically functionalized graphene

Graphite was functionalized electrochemically in a potassium fluoride solution and used to prepare polyimide (PI)/graphene nanohybrid films. The as‐made electrochemically fluorinated graphene (EFG) was used to prepare nanohybrid films with colorless PI, which was synthesized from 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and bis(trifluoromethyl) benzidine by in situ polymerization. The surface functionalization of graphite was characterized by powder XRD, TEM with energy dispersive X‐ray spectroscopy elemental mapping, X‐ray photoelectron spectroscopy, Raman spectroscopy, and TGA. The microstructure of the films was characterized by Fourier transform IR spectroscopy, XRD and SEM. The film properties were measured using a universal testing machine, TGA, dynamic mechanical analysis, four‐point probe, UV–visible spectroscopy and water contact angle analysis. EFG improved the tensile strength and modulus of the nanohybrid films by 20% and 50%, respectively. The glass transition temperature and electrical conductivity of the nanohybrid films were 12 °C and nine orders of magnitude higher than those of the neat PI film, respectively. The nanohybrid film maintained 80% optical transmittance even after the addition of 0.1 wt% EFG. © 2019 Society of Chemical Industry     

Mixed Matrix PVDF/Graphene and Composite‐Skin PVDF/Graphene Oxide Membranes Applied in Membrane Distillation

This work elucidates the influence of graphene (G) and graphene oxide (GO) content on the desalination performance and scaling characteristics of G/polyvinylidene fluoride (G/PVDF) mixed matrix and GO/PVDF composite‐skin membranes, applied in a direct contact membrane distillation process (DCMD). Inclusion of high quality, nonoxidized, monolayered graphene sheets as polymer membrane filler, and application of a novel GO/water‐bath coagulation method for the preparation of the GO/PVDF composite films, took place. Water permeability and desalination tests via DCMD, revealed that the optimal G content was 0.87 wt%. At such concentration the water vapor flux of the G/PVDF membrane was 1.7 times that of the nonmodified reference, while the salt rejection efficiency was significantly improved (99.8%) as compared to the neat PVDF. Similarly the GO/PVDF surface‐modified membrane, prepared using a GO dispersion with low concentration (0.5 g/L), exhibited twofold higher water vapor permeate flux as compared to the neat PVDF, but however, its salt rejection efficiency was moderate (80%), probably due to pore wetting during DCMD. The relatively low scaling tendency observed for both G and GO modified membranes is primarily attributed to their smoother surface texture as compared to neat PVDF, while scaling is caused by the deposition of calcite crystals, identified by XRPD analysis. POLYM. ENG. SCI., 59:E262–E278, 2019. © 2018 Society of Plastics Engineers     

Graphene nanosheets prepared by low-temperature exfoliation and reduction technique toward fabrication of high-performance poly(1-butene)/graphene films

Thermal exfoliation and reduction of graphene oxide (GO) were performed to prepare graphene nanosheets at 300 °C under the ambient atmosphere without any supplementary conditions. The microstructure and morphology of the resulting graphene nanosheets were characterized with scanning electron microscopy, transmission electric microscopy, atomic force microscopy and X-ray photoelectron spectroscopy. The composite films based on poly(1-butene) (PB) and graphene nanosheets were prepared successfully through solution blending and compression molding. The morphological investigation suggested that the graphene nanosheets with nanoscale thickness achieved a homogeneous dispersion in the PB matrix. The composite films exhibited a sharp transition from insulating state to the conducting one with a low percolation threshold, followed by a high electrical conductivity at graphene content higher than 1.6 vol %. The composite films also achieved high dielectric constant with low dielectric loss due to the effective electrical conductive path established by graphene nanosheets in a local range. Moreover, the mechanical evaluation demonstrated that a considerable reinforcement was achieved for the composite films due to the strong interfaces between the graphene nanosheets and PB matrix. The introduction of graphene nanosheets not only enhanced the nucleation capability and crystallinity of PB domain but also improved the thermal stability of the composite films. In addition, the composite films showed an increase in storage modulus and a decrease in loss factors due to the incorporation of graphene nanosheets.     

Influence of structure of amines on the properties of amines‐modified reduced graphene oxide/polyimide composites

Graphene oxide (GO), as an important precursor of graphene, was functionalized using alkyl‐amines with different structure and then reduced to prepare reduced amines grafted graphene oxide (RAGOs) by N₂H₄ · H₂O. The successful chemical amidation reaction between amine groups of alkyl‐amines and carboxyl groups of GO was confirmed by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA). Then RAGOs/polyimide nanocomposites were prepared via in situ polymerization and thermal curing process with different loadings of RAGOs. The modification of amine chains lead to homogenous dispersion of RAGOs in the composites and it formed strong interfacial adhesion between RAGOs and the polymer matrix. The mechanical and electrical properties of polyimide (PI) were significantly improved by incorporation of a small amount of RAGOs, the influence of structure of amines grafted on RAGOs on the enhancement effects of composites was discussed. The research results indicated that the proper structure of amine could effectively enhance the properties of composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43820.     

Multifunctional polyimide/graphene oxide composites via in situ polymerization

In this article, we detail an effective way to improve electrical, thermal, and gas barrier properties using a simple processing method for polymer composites. Graphene oxide (GO) prepared with graphite using a modified Hummers method was used as a nanofiller for r‐GO/PI composites by in situ polymerization. PI composites with different loadings of GO were prepared by the thermal imidization of polyamic acid (PAA)/GO. This method greatly improved the electrical properties of the r‐GO/PI composites compared with pure PI due to the electrical percolation networks of reduced graphene oxide within the films. The conductivity of r‐GO/PI composites (30:70 w/w) equaled 1.1 × 10¹ S m^?1, roughly 10¹⁴ times that of pure PI and the oxygen transmission rate (OTR, 30:70 w/w) was reduced by about 93%. The Young's modulus of the r‐GO/PI composite film containing 30 wt % GO increased to 4.2 GPa, which was an approximate improvement of 282% compared with pure PI film. The corresponding strength and the elongation at break decreased to 70.0 MPa and 2.2%, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40177.     

Graphene oxide-anchored reactive sulfonated copolymer via simple one pot condensation polymerization: proton-conducting solid electrolytes

A rapid and efficient post-polymerization functionalization of poly(urea-co-urethane) (PUU) onto the graphene oxide (GO) nanosheets has been developed to produce super-acidic polymer/GO hybrid nanosheets. Thus, the surface of GO nanosheets were functionalized with 3-(triethoxysilyl)propyl isocyanate (TESPIC) from hydroxyl groups to yield isocyanate functionalized graphene oxide nanosheets. Then, sulfonated polymer/GO hybrid nanosheets were prepared by condensation polymerization of isocyanate-terminated pre-polyurea onto isocyanate functionalized graphene oxide nanosheets through the formation of carbamate bonds. FTIR and TGA results indicated that TESPIC modifier agent and poly(urea-co-urethane) were successfully grafted onto the GO nanosheets. The grafting efficiency of poly(urea-co-urethane) polymer onto the GO nanosheets was estimated from TGA thermograms to be 205.9%. Also, sulfonated polymer/GO hybrid nanosheets showed a proton conductivity as high as 3.7 mS cm^?1. Modification and morphology of GO nanosheets before and after modification processes were studied by scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD).     

Thermal and mechanical properties of liquid silicone rubber composites filled with functionalized graphene oxide

To improve the thermal and mechanical properties of liquid silicone rubber (LSR) for application, the graphene oxide (GO) was proposed to reinforce the LSR. The GO was functionalized with triethoxyvinylsilane (TEVS) by dehydration reaction to improve the dispersion and compatibility in the matrix. The structure of the functionalized graphene oxide (TEVS‐GO) was evaluated by Thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectra, X‐ray diffraction (XRD), and energy dispersive X‐ray spectroscopy (EDX). It was found that the TEVS was successfully grafted on the surface of GO. The TEVS‐GO/LSR composites were prepared via in situ polymerization. The structure of the composites was verified by FTIR, XRD, and scanning electron microscopy (SEM). The thermal properties of the composites were characterized by TGA and thermal conductivity. The results showed that the 10% weight loss temperature (T₁₀) increased 16.0°C with only 0.3 wt % addition of TEVS‐GO and the thermal conductivity possessed a two‐fold increase, compared to the pure LSR. Furthermore, the mechanical properties were studied and results revealed that the TEVS‐GO/LSR composites with 0.3 wt % TEVS‐GO displayed a 2.3‐fold increase in tensile strength, a 2.79‐fold enhancement in tear strength, and a 1.97‐fold reinforcement in shear strength compared with the neat LSR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42582.     

Graphene and graphene oxide and their uses in barrier polymers

Currently, there is great interest in graphene‐based devices and applications because graphene has unique electronic and material properties, which can lead to enhanced material performance. Graphene may be used in a wide variety of potential applications from next‐generation transistors to lightweight and high‐strength polymeric composite materials. Graphene, which has atomic thickness and two‐dimensional sizes in the tens of micrometer range or larger, has also been considered a promising nanomaterial in gas‐ or liquid‐barrier applications because perfect graphene sheets do not allow diffusion of small gases or liquids through its plane. Recent molecular simulations and experiments have demonstrated that graphene and its derivatives can be used for barrier applications. In general, graphene and its derivatives can be applied via two major routes for barrier polymer applications. One is the transfer or coating of few‐layered, ultrathin graphene and its derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), on polymeric substrates. The other is the incorporation of fully exfoliated GO or rGO nanosheets into the polymeric matrix. In this article, we review the state‐of‐the‐art research on the use of graphene, GO, and rGO for barrier applications, including few‐layered graphene or its derivatives in coated polymeric films and polymer nanocomposites consisting of chemically exfoliated GO and rGO nanosheets, and their gas‐barrier properties. As compared to other nanomaterials being used for barrier applications, the advantages and current limitations are discussed to highlight challenging issues for future research and the potential applications of graphene/polymer, GO/polymer, and rGO/polymer composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39628.     

Effect of copper sulfate pentahydrate on the structure and properties of poly(vinyl alcohol)/graphene oxide composite films

Poly(vinyl alcohol) (PVA)/graphene oxide (GO)/copper sulfate pentahydrate (CuSO₄·5H₂O) composite films were prepared by the solution casting method, and the effect of CuSO₄·5H₂O on the structure and properties of the PVA/GO composites was investigated. Fourier transform infrared (FTIR) analysis proved the crosslinking interaction between CuSO₄·5H₂O and the ? OH group of PVA. The crystallinity of the composite films increased first and then decreased. For the composite films, the tensile strength, Young's modulus, and yield stress values improved with increasing CuSO₄·5H₂O, whereas the elongation at break decreased compared with that of the neat PVA/GO composite film. The thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG) patterns of the PVA/GO/CuSO₄·5H₂O composite films showed that the thermal stability decreased; this was consistent with the TGA–FTIR analysis. A remarkable improvement in the oxygen‐barrier properties was achieved. The oxygen permeability coefficient was reduced by 60% compared to that of the neat PVA/GO composite film. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44135.