Ni Single Atoms Embedded in Graphene Nanoribbon Sieves for High-Performance CO2 Reduction to CO

Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO₂ reduction (CO₂RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni–N₄–C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm⁻² CO partial current density and 96% faradaic efficiency of CO (FE_CO) at −1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FE_CO and 2.4 V cell voltage are achieved at 200 mA cm⁻² current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.     

Ammonia Thermal Treatment toward Topological Defects in Porous Carbon for Enhanced Carbon Dioxide Electroreduction

Topological defects, with an asymmetric local electronic redistribution, are expected to locally tune the intrinsic catalytic activity of carbon materials. However, it is still challenging to deliberately create high-density homogeneous topological defects in carbon networks due to the high formation energy. Toward this end, an efficient NH₃ thermal-treatment strategy is presented for thoroughly removing pyrrolic-N and pyridinic-N dopants from N-enriched porous carbon particles, to create high-density topological defects. The resultant topological defects are systematically investigated by near-edge X-ray absorption fine structure measurements and local density of states analysis, and the defect formation mechanism is revealed by reactive molecular dynamics simulations. Notably, the as-prepared porous carbon materials possess an enhanced electrocatalytic CO₂ reduction performance, yielding a current density of 2.84 mA cm⁻² with Faradaic efficiency of 95.2% for CO generation. Such a result is among the best performances reported for metal-free CO₂ reduction electrocatalysts. Density functional theory calculations suggest that the edge pentagonal sites are the dominating active centers with the lowest free energy (ΔG) for CO₂ reduction. This work not only presents deep insights for the defect engineering of carbon-based materials but also improves the understanding of electrocatalytic CO₂ reduction on carbon defects.     

High-Dispersive Pd Nanoparticles on Hierarchical N-Doped Carbon Nanocages to Boost Electrochemical CO2 Reduction to Formate at Low Potential

Electrochemical CO₂ reduction reaction (CO₂RR) to value-added chemicals/fuels is an effective strategy to achieve the carbon neutral. Palladium is the only metal to selectively produce formate via CO₂RR at near-zero potentials. To reduce cost and improve activity, the high-dispersive Pd nanoparticles on hierarchical N-doped carbon nanocages (Pd/hNCNCs) are constructed by regulating pH in microwave-assisted ethylene glycol reduction. The optimal catalyst exhibits high formate Faradaic efficiency of >95% within −0.05–0.30 V and delivers an ultrahigh formate partial current density of 10.3 mA cm⁻² at the low potential of −0.25 V. The high performance of Pd/hNCNCs is attributed to the small size of uniform Pd nanoparticles, the optimized intermediates adsorption/desorption on modified Pd by N-doped support, and the promoted mass/charge transfer kinetics arising from the hierarchical structure of hNCNCs. This study sheds light on the rational design of high-efficient electrocatalysts for advanced energy conversion.     

Synergistic Catalysis over Iron‐Nitrogen Sites Anchored with Cobalt Phthalocyanine for Efficient CO2 Electroreduction

Simultaneously achieving high Faradaic efficiency, current density, and stability at low overpotentials is essential for industrial applications of electrochemical CO₂ reduction reaction (CO₂RR). However, great challenges still remain in this catalytic process. Herein, a synergistic catalysis strategy is presented to improve CO₂RR performance by anchoring Fe‐N sites with cobalt phthalocyanine (denoted as CoPc©Fe‐N‐C). The potential window of CO Faradaic efficiency above 90% is significantly broadened from 0.18 V over Fe‐N‐C alone to 0.71 V over CoPc©Fe‐N‐C while the onset potential of CO₂RR over both catalysts is as low as ?0.13 V versus reversible hydrogen electrode. What is more, the maximum CO current density is increased ten times with significantly enhanced stability. Density functional theory calculations suggest that anchored cobalt phthalocyanine promotes the CO desorption and suppresses the competitive hydrogen evolution reaction over Fe‐N sites, while the *COOH formation remains almost unchanged, thus demonstrating unprecedented synergistic effect toward CO₂RR.     

Regulation of Electrocatalytic Behavior by Axial Oxygen Enhances the Catalytic Activity of CoN4 Sites for CO2 Reduction

Recent studies have found that the existence of oxygen around the active sites may be essential for efficient electrochemical CO₂-to-CO conversion. Hence, this work proposes the modulation of oxygen coordination and investigates the as-induced catalytic behavior in CO₂RR. It designs and synthesizes conjugated phthalocyanine frameworks catalysts (CPF-Co) with abundant CoN₄ centers as an active source, and subsequently modifies the electronic structure of CPF-Co by introducing graphene oxide (GO) with oxygen-rich functional groups. A systematic study reveals that the axial coordination between oxygen and the catalytic sites could form an optimized O-CoN₄ structure to break the electron distribution symmetry of Co, thus reducing the energy barrier to the activation of CO₂ to COOH*. Meanwhile, by adjusting the content of oxygen, the proper supports can also facilitate the charge transfer efficiency between the matrix layer and the catalytic sites. The optimized CPF-Co@LGO exhibits a high TOF value (2.81 s⁻¹), CO selectivity (97.6%) as well as stability (24 h) at 21 mA cm⁻² current density. This work reveals the modulation of oxygen during CO₂RR and provides a novel strategy for the design of efficient electrocatalysts, which may inspire new exploration and principles for CO₂RR.     

Promoting CO2 Dynamic Activation via Micro-Engineering Technology for Enhancing Electrochemical CO2 Reduction

Optimizing the coordination structure and microscopic reaction environment of isolated metal sites is promising for boosting catalytic activity for electrocatalytic CO₂ reduction reaction (CO₂RR) but is still challenging to achieve. Herein, a newly electrostatic induced self-assembly strategy for encapsulating isolated Ni-C₃N₁ moiety into hollow nano-reactor as I-Ni SA/NHCRs is developed, which achieves FE_CO of 94.91% at −0.80 V, the CO partial current density of ≈−15.35 mA cm⁻², superior to that with outer Ni-C₂N₂ moiety (94.47%, ≈−12.06 mA cm⁻²), or without hollow structure (92.30%, ≈−5.39 mA cm⁻²), and high FE_CO of ≈98.41% at 100 mA cm⁻² in flow cell. COMSOL multiphysics finite-element method and density functional theory (DFT) calculation illustrate that the excellent activity for I-Ni SA/NHCRs should be attributed to the structure-enhanced kinetics process caused by its hollow nano-reactor structure and unique Ni-C₃N₁ moiety, which can enrich electron on Ni sites and positively shift d-band center to the Fermi level to accelerate the adsorption and activation of CO₂ molecule and *COOH formation. Meanwhile, this strategy also successfully steers the design of encapsulating isolated iron and cobalt sites into nano-reactor, while I-Ni SA/NHCRs-based zinc-CO₂ battery assembled with a peak power density of 2.54 mW cm−⁻² is achieved.     

Ultrathin Nitrogen-Doped Carbon Encapsulated Ni Nanoparticles for Highly Efficient Electrochemical CO2 Reduction and Aqueous Zn-CO2 Batteries

Electrochemical CO₂ reduction reaction (CO₂RR), powered by renewable electricity, has attracted great attention for producing high value-added fuels and chemicals, as well as feasibly mitigating CO₂ emission problem. Here, this work reports a facile hard template strategy to prepare the Ni@N-C catalyst with core–shell structure, where nickel nanoparticles (Ni NPs) are encapsulated by thin nitrogen-doped carbon shells (N-C shells). The Ni@N-C catalyst has demonstrated a promising industrial current density of 236.7 mA cm⁻² with the superb FE_CO of 97% at −1.1 V versus RHE. Moreover, Ni@N-C can drive the reversible Zn-CO₂ battery with the largest power density of 1.64 mW cm⁻², and endure a tough cycling durability. These excellent performances are ascribed to the synergistic effect of Ni@N-C that Ni NPs can regulate the electronic microenvironment of N-doped carbon shells, which favor to enhance the CO₂ adsorption capacity and the electron transfer capacity. Density functional theory calculations prove that the binding configuration of N-C located on the top of Ni slabs (Top-Ni@N-C) is the most thermodynamically stable and possess a lowest thermodynamic barrier for the formation of COOH^* and the desorption of CO. This work may pioneer a new method on seeking high-efficiency and worthwhile electrocatalysts for CO₂RR and Zn-CO₂ battery.     

Geometric and Electronic Structural Engineering of Isolated Ni Single Atoms for a Highly Efficient CO2 Electroreduction

Tuning the coordination environment and geometric structures of single atom catalysts is an effective approach for regulating the reaction mechanism and maximize the catalytic efficiency of single-atom centers. Here, a template-based synthesis strategy is proposed for the synthesis of high-density NiN_x sites anchored on the surface of hierarchically porous nitrogen-doped carbon nanofibers (Ni-HPNCFs) with different coordination environments. First-principles calculations and advanced characterization techniques demonstrate that the single Ni atom is strongly coordinated with both pyrrolic and pyridinic N dopants, and that the predominant sites are stabilized by NiN₃ sites. This dual engineering strategy increases the number of active sites and utilization efficiency of each single atom as well as boosts the intrinsic activity of each active site on a single-atom scale. Notably, the Ni-HPNCF catalyst achieves a high CO Faradaic efficiency (FE_CO) of 97% at a potential of −0.7 V, a high CO partial current density (j_CO) of 49.6 mA cm⁻² (−1.0 V), and a remarkable turnover frequency of 24 900 h⁻¹ (−1.0 V) for CO₂ reduction reactions (CO₂RR). Density functional theory calculations show that compared to pyridinic-type NiN_x, the pyrrolic-type NiN₃ moieties display a superior CO₂RR activity over hydrogen evolution reactions, resulting in their superior catalytic activity and selectivity.     

Oxalate-Assisted Synthesis of Hollow Carbon Nanocage With Fe Single Atoms for Electrochemical CO2 Reduction

Metal single-atom catalysts are promising in electrochemical CO₂ reduction reaction (CO₂RR). The pores and cavities of the supports can promote the exposure of active sites and mass transfer of reactants, hence improve their performance. Here, iron oxalate is added to ZIF-8 and subsequently form hollow carbon nanocages during calcination. The formation mechanism of the hollow structure is studied in depth by controlling variables during synthesis. Kirkendall effect is the main reason for the formation of hollow porous carbon nanocages. The hollow porous carbon nanocages with Fe single atoms exhibit better CO₂RR activity and CO selectivity. The diffusion of CO₂ facilitated by the mesoporous structure of carbon nanocage results in their superior activity and selectivity. This work has raised an effective strategy for the synthesis of hollow carbon nanomaterials, and provides a feasible pathway for the rational design of electrocatalysts for small molecule activation.     

Structure-Controlled Carbon Hosts for Dendrite-Free Aqueous Zinc Batteries

The surging demand for environmental-friendly and safe electrochemical energy storage systems has driven the development of aqueous zinc (Zn)-ion batteries (ZIBs). However, metallic Zn anodes suffer from severe dendrite growth and large volume change, resulting in a limited lifetime for aqueous ZIB applications. Here, it is shown that 3D mesoporous carbon (MC) with controlled carbon and defect configurations can function as a highly reversible and dendrite-free Zn host, enabling the stable operation of aqueous ZIBs. The MC host has a structure-controlled architecture that contains optimal sp²-carbon and defect sites, which results in an improved initial nucleation energy barrier and promotes uniform Zn deposition. As a consequence, the MC host shows outstanding Zn plating/stripping performance over 1000 cycles at 2 mA cm⁻² and over 250 cycles at 6 mA cm⁻² in asymmetric cells. Density functional theory calculations further reveal the role of the defective sp²-carbon surface in Zn adsorption energy. Moreover, a full cell based on Zn@MC900 anode and V₂O₅ cathode exhibits remarkable rate performance and cycling stability over 3500 cycles. These results establish a structure-mechanism-performance relationship of the carbon host as a highly reversible Zn anode for the reliable operation of ZIBs.     

Well‐Defined Single‐Atom Cobalt Catalyst for Electrocatalytic Flue Gas CO2 Reduction

Single‐atom Co catalyst Co‐Tpy‐C with well‐defined sites is synthesized by pyrolysis of a Co terpyridine (Tpy) organometallic complex. The Co‐Tpy‐C catalyst exhibits excellent activity for the electrochemical CO₂ reduction reaction in aqueous electrolyte, with CO faradaic efficiency (FE) of over 95% from ?0.7 to ?1.0 V (vs RHE). By comparison, catalysts without Co or Tpy ligand added do not show any high CO FE. When simulated flue gas with 15% of CO₂ is used as the source of CO₂, CO FE is kept at 90.1% at ?0.5 V versus RHE. During gas phase flow electrolysis using simulated flue gas, the CO partial current density is further increased to 86.4 mA cm^?2 and CO FE reached >90% at the cell voltage of 3.4 V. Experiments and density functional theory calculations indicate that uniform single‐atom Co–N₄ sites mainly contribute to the high activity for CO₂ reduction.     

Multilayer-Cavity Tandem Catalyst for Profiling Sequentially Coupling of Intermediate CO in Electrocatalytic Reduction Reaction of CO2 to Multi-Carbon Products

Electrochemical CO₂ reduction reaction (CO₂RR) is an effective approach to address CO₂ emission, promote recycling, and synthesize high-value multi-carbon (C₂₊) chemicals for storing renewable electricity in the long-term. The construction of multilayer-bound nanoreactors to achieve management of intermediate CO is a promising strategy for tandem to C₂₊ products. In this study, a series of Ag@Cu₂O nanoreactors consisting of an Ag-yolk and a multilayer confined Cu shell is designed to profile electrocatalytic CO₂RR reactions. The optimized Ag@Cu₂O-2 nanoreactor exhibits a 74% Faradaic efficiency during the C₂₊ pathway and remains stable for over 10 h at a bias current density of 100 mA cm⁻². Using the finite element method, this model determines that the certain volume of cavity in the Ag@Cu₂O nanoreactors facilitates on-site CO retention and that multilayers of Cu species favor CO capture. Density functional theory calculations illustrate that the biased generation of ethanol products may arise from the (100)/(111) interface of the Cu layer. In-depth explorations in multilayer-bound nanoreactors provide structural and interfacial guidance for sequential coupling of CO₂RR intermediates for efficient C₂₊ generation.     

Gas Diffusion Strategy for Inserting Atomic Iron Sites into Graphitized Carbon Supports for Unusually High-Efficient CO2 Electroreduction and High-Performance Zn–CO2 Batteries

Emerging single-atom catalysts (SACs) hold great promise for CO₂ electroreduction (CO₂ER)_, but the design of highly active and cost-efficient SACs is still challenging. Herein, a gas diffusion strategy, along with one-step thermal activation, for fabricating N-doped porous carbon polyhedrons with trace isolated Fe atoms (Fe₁NC) is developed. The optimized Fe₁NC/S₁-1000 with atomic Fe-N₃ sites supported by N-doped graphitic carbons exhibits superior CO₂ER performance with the CO Faradaic efficiency up to 96% at −0.5 V, turnover frequency of 2225 h⁻¹, and outstanding stability, outperforming almost all previously reported SACs based on N-doped carbon supported nonprecious metals. The observed excellent CO₂ER performance is attributed to the greatly enhanced accessibility and intrinsic activity of active centers due to the increased electrochemical surface area through size modulation and the redistribution of doped N species by thermal activation. Experimental observations and theoretical calculations reveal that the Fe-N₃ sites possess balanced adsorption energies of *COOH and *CO intermediates, facilitating CO formation. A universal gas diffusion strategy is used to exclusively yield a series of dimension-controlled carbon-supported SACs with single Fe atoms while a rechargeable Zn–CO₂ battery with Fe₁NC/S₁-1000 as cathode is developed to deliver a maximal power density of 0.6 mW cm⁻².     

Saturated Coordination Lu?N6 Defect Sites for Highly Efficient Electroreduction of CO2

Metal single-atom and internal structural defects typically coexist in M–N–C materials obtained through the existing basic pyrolysis processes. Identifying a correlation between them to understand the structure–activity relationship and achieve efficient catalytic performance is important, particularly for the rare-earth (RE) elements with rich electron orbitals and strong coordination capabilities. Herein, a novel single-atom catalyst based on the RE element lutetium is successfully synthesized on a N–C support. Structural and simulation analyses demonstrate that the formation of a Lu N₆ structural site with an individual defect because of pyrolysis is thermodynamically favorable in Lu–N–C. Using KHCO₃-based electrolytes facilitates the fall of the K⁺ cations into the defective sites of Lu–N–C, thus enabling improved CO₂ capture and activation, which increases the catalyst conductivity for Lu–N–C. In this study, the catalyst exhibits a Faradaic efficiency of 95.1% for CO at a current density of 18.2 mA cm⁻² during carbon dioxide reduction reaction. This study thus provides new insights into understanding RE–N–C materials for energy utilization.     

Synergistic Functionality of Dopants and Defects in Co-Phthalocyanine/B-CN Z-Scheme Photocatalysts for Promoting Photocatalytic CO2 Reduction Reactions

The realization of solar-light-driven CO₂ reduction reactions (CO₂ RR) is essential for the commercial development of renewable energy modules and the reduction of global CO₂ emissions. Combining experimental measurements and theoretical calculations, to introduce boron dopants and nitrogen defects in graphitic carbon nitride (g-C₃N₄), sodium borohydride is simply calcined with the mixture of g-C₃N₄ (CN), followed by the introduction of ultrathin Co phthalocyanine through phosphate groups. By strengthening H-bonding interactions, the resultant CoPc/P-BNDCN nanocomposite showed excellent photocatalytic CO₂ reduction activity, releasing 197.76 and 130.32 µmol h⁻¹ g⁻¹ CO and CH₄, respectively, and conveying an unprecedented 10-26-time improvement under visible-light irradiation. The substantial tuning is performed towards the conduction and valance band locations by B-dopants and N-defects to modulate the band structure for significantly accelerated CO₂ RR. Through the use of ultrathin metal phthalocyanine assemblies that have a lot of single-atom sites, this work demonstrates a sustainable approach for achieving effective photocatalytic CO₂ activation. More importantly, the excellent photoactivity is attributed to the fast charge separation via Z-scheme transfer mechanism formed by the universally facile strategy of dimension-matched ultrathin (≈4 nm) metal phthalocyanine-assisted nanocomposites.     

Tuning Carbon Defect in Copper Single-Atom Catalysts for Efficient Oxygen Reduction

Defect chemistry in carbon matrix shows great potential for promoting the oxygen reduction reaction (ORR) of metal single-atom catalysts. Herein, a modified pyrolysis strategy is proposed to tune carbon defects in copper single-atom catalysts (Cu-SACs) to fully understand their positive effect on the ORR activity. The optimized Cu-SACs with controllable carbon defect degree and enhanced active specific surface area can exhibit improved ORR activity with a half-wave potential of 0.897 V_RHE, ultrahigh limiting current density of 6.5 mA cm⁻², and superior turnover frequency of 2.23 e site⁻¹ s⁻¹. The assembled Zn–air batteries based on Cu-SACs can also show well-retained reversibility and voltage platform over 1100 h charge/discharge period. Density functional theory calculations reveal that suitable carbon defects can redistribute charge density of Cu-N4 active sites to weaken the O–O bond in adsorbed OOH* intermediate and thus reduce its dissociation energy. This discovery offers a universal strategy for fabricating superior single-atom catalysts with high-efficiency active sites toward energy-directed applications.     

A Hierarchical Z‑Scheme α‐Fe2O3/g‐C3N4 Hybrid for Enhanced Photocatalytic CO2 Reduction

The challenge in the artificial photosynthesis of fossil resources from CO₂ by utilizing solar energy is to achieve stable photocatalysts with effective CO₂ adsorption capacity and high charge‐separation efficiency. A hierarchical direct Z‐scheme system consisting of urchin‐like hematite and carbon nitride provides an enhanced photocatalytic activity of reduction of CO₂ to CO, yielding a CO evolution rate of 27.2 µmol g^?1 h^?1 without cocatalyst and sacrifice reagent, which is >2.2 times higher than that produced by g‐C₃N₄ alone (10.3 µmol g^?1 h^?1). The enhanced photocatalytic activity of the Z‐scheme hybrid material can be ascribed to its unique characteristics to accelerate the reduction process, including: (i) 3D hierarchical structure of urchin‐like hematite and preferable basic sites which promotes the CO₂ adsorption, and (ii) the unique Z‐scheme feature efficiently promotes the separation of the electron–hole pairs and enhances the reducibility of electrons in the conduction band of the g‐C₃N₄. The origin of such an obvious advantage of the hierarchical Z‐scheme is not only explained based on the experimental data but also investigated by modeling CO₂ adsorption and CO adsorption on the three different atomic‐scale surfaces via density functional theory calculation. The study creates new opportunities for hierarchical hematite and other metal‐oxide‐based Z‐scheme system for solar fuel generation.     

A Bifunctional Highly Efficient FeNx/C Electrocatalyst

Herein, a type of Fe, N‐codoped carbon electrocatalyst (FeN_x/C, Fe‐N‐BCNT#BP) containing bamboo carbon nanotubes and displaying bifunctional high catalytic efficiency for both oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) is reported. It shows high electrocatalytic activity and stability for both the ORR process with onset potential of 1.03 V_RHE in alkaline and the CO2RR to CO with high faradic efficiency up to 90% and selectivity of about 100% at low overpotential of 0.49 V. For CO2RR to CO, it is revealed that Fe₃C is active but the activity of FeN_x centers is lower than that of C–N‐based centers, contrary with that observed for ORR. Due to its low cost and high electrocatalytic performance for these two reduction reactions, the obtained catalyst is very promising for extensive application in future. The revealed huge activity difference of the same types of active sites for different reactions can efficiently guide the synthesis of advanced materials with multifunction.     

Silk‐Derived 2D Porous Carbon Nanosheets with Atomically‐Dispersed Fe‐Nx‐C Sites for Highly Efficient Oxygen Reaction Catalysts

Controlled synthesis of highly efficient, stable, and cost‐effective oxygen reaction electrocatalysts with atomically‐dispersed Me–N_x–C active sites through an effective strategy is highly desired for high‐performance energy devices. Herein, based on regenerated silk fibroin dissolved in ferric chloride and zinc chloride aqueous solution, 2D porous carbon nanosheets with atomically‐dispersed Fe–N_x–C active sites and very large specific surface area (≈2105 m² g^?1) are prepared through a simple thermal treatment process. Owing to the 2D porous structure with large surface area and atomic dispersion of Fe–N_x–C active sites, the as‐prepared silk‐derived carbon nanosheets show superior electrochemical activity toward the oxygen reduction reaction with a half‐wave potential (E_1/2) of 0.853 V, remarkable stability with only 11 mV loss in E_1/2 after 30 000 cycles, as well as good catalytic activity toward the oxygen evolution reaction. This work provides a practical and effective approach for the synthesis of high‐performance oxygen reaction catalysts towards advanced energy materials.     

Linear Conjugated Coordination Polymers for Electrocatalytic Oxygen Evolution Reaction

Conjugated coordination polymers (CCPs) have attracted extensive attention for various applications related to energy storage and conversion in the past few years, despite that there are many CCPs with unclear chemical states and structures. Here, linear CCPs (LCCPs), with metal–O₄ active sites grown on carbon paper (CP) for oxygen evolution reaction (OER), are presented. The LCCPs with high crystallinity and simple structures exhibit the order of electrocatalytic activity of Co–O₄ > Ni–O₄ > Fe–O₄ in terms of the metal–O₄ centers. The Co-based LCCP shows higher OER performance (263 mV at 10 mA cm⁻²) and better durability (90 h at 30 mA cm⁻²) than commercial IrO₂/CP. The structures and chemical states of LCCPs are carefully investigated, and density functional theory is used to reveal the mechanism of OER at the central metal site. This investigation into LCCPs provides new sights for a better understanding of CCPs and expands the applications of LCCPs with metal–O₄ sites.