Structure, infrared and Raman spectroscopic studies of new Sr0.50SbFe(PO4)3 and SrSb0.50Fe1.50(PO4)3 Nasicon phases

Two newly synthesised Sr_0.50SbFe(PO₄)₃ [Sr_0.5.] and SrSb_0.50Fe_1.50(PO₄)₃ [Sr.] phases were obtained by conventional solid-state reaction techniques at 1000 °C in air atmosphere. Their crystallographic structures were determined at room temperature from X-ray powder diffraction (XRPD) data using the Rietveld analysis. Both compounds belong to the Nasicon structural family. [Sr_0.5.] and [Sr.] crystallise in rhombohedral system with \textR[`3] {\text{R}}\overline{3} and \textR[`3] \textc {\text{R}}\overline{3} {\text{c}} space group, respectively. Hexagonal cell parameters for [Sr_0.5.] and [Sr.] are: a = 8.227(1) ?, c = 22.767(2) ? and a = 8.339(1) ?, c = 22.704(2) ?, respectively. Sr²⁺ and vacancies in {[Sr_0.50]_3a[□_0.50]_3b}_M1SbFe(PO₄)₃ are practically ordered within the two positions, 3a and 3b, of M1 sites. Structure refinements show also an ordered distribution of Sb⁵⁺ and Fe³⁺ ions within the Nasicon framework. Within the structure, each Sr_(3a)O₆ octahedron shares two faces with two Fe³⁺O₆ octahedra and each vacancy (□_(3b)O₆) site is located between two Sb⁵⁺O₆ octahedra. In [Sr]_M1Sb_0.50Fe_1.50(PO₄)₃ compound, all M1 sites are occupied by Sr²⁺ and the Sb⁵⁺ and Fe³⁺ ions are randomly distributed within the Nasicon framework. A Raman and infrared spectroscopic study was used to obtain further structural information about the nature of bonding in both selected compositions.     

Novel blue-emitting phosphor NaMg4(PO4)3:Eu, Ce with energy transfer

A blue-emitting phosphor of NaMg₄(PO₄)₃:Eu²⁺, Ce³⁺ was prepared by a combustion-assisted synthesis method. The phase formation was confirmed by X-ray powder diffraction measurement. Photoluminescence excitation spectrum measurements show that the phosphor can be excited by near UV light from 230 to 400 nm and presents a dominant luminescence band centered at 424 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ions at room temperature. Effective energy transfer occurs in Ce³⁺/Eu²⁺ co-doped NaMg₄(PO₄)₃ due to large spectral overlap between the emission of Ce³⁺ and excitation of Eu²⁺. Co-doping of Ce³⁺ enhances the emission intensity of Eu²⁺ greatly by transferring its excitation energy to Eu²⁺, and Ce³⁺ plays a role as a sensitizer. Ce³⁺-Eu²⁺ co-doped NaMg₄(PO₄)₃ powders can possibly be applied as blue phosphors in the fields of lighting and display.     

Photoluminescence and radioluminescence of pure and Ce activated Na3Gd(PO4)2

The spectroscopic properties of Na₃Gd(PO₄)₂ and Na₃Gd(PO₄)₂:Ce³⁺ phosphors in the VUV-UV spectral range were investigated. Five excitation bands of Ce³⁺ ions at Gd³⁺ sites are observed at wavelengths of 205, 246, 260, 292, and 321 nm. Doublet Ce³⁺ 5d → 4f emission bands are observed at 341 and 365 nm with a decay constant τ_1/e around 26 ns. The X-ray excited luminescence of Na₃Gd_0.99Ce_0.01(PO₄)₂ at room temperature shows a photon yield of ∼17,000 photons/MeV of absorbed X-ray energy.     

A novel red long lasting phosphorescent (LLP) material β-Zn3(PO4)2:Mn, Sm

A novel red long lasting phosphorescent materials β-Zn₃(PO₄)₂:Mn²⁺,Sm³⁺ is firstly synthesized by high-temperature solid-state reaction. The influence of Sm³⁺ ions on luminescence and long lasting phosphorescence properties of Mn²⁺ in phosphor β-Zn₃(PO₄)₂:Mn²⁺,Sm³⁺ are systematically investigated. It is found that the red phosphorescence (λ = 616 nm) performance of Mn²⁺ ion such as brightness and duration is largely improved when Sm³⁺ ion is co-doped into the matrix in which Mn²⁺ ion acts as luminescent center and Sm³⁺ ion plays an important role of electron trap. Thermoluminescence spectrums show that there exists one peak in β-Zn₃(PO₄)₂:Mn²⁺,Sm³⁺, the depth of which is 0.33 eV, and that there are three peaks in β-Zn₃(PO₄)₂:Mn²⁺, among which the depth of the lowest temperature peak in β-Zn₃(PO₄)₂:Mn²⁺ is 0.37 eV. Such differences in the trap depth result in the improvement of red long lasting phosphorescence of Mn²⁺ in present matrix.     

Nature of intrinsic and impure luminescence of MAlP2O7 crystals

The results of the photoluminescence (PL) investigation of pure and chromium-doped MAlP₂O₇ (M = Na, K, Cs) compounds are presented. The spectra of the intrinsic luminescence of MAlP₂O₇ crystals consist of a separated UV band at a peak position near 330 nm and a complex wide band which covers the region of visible light up to 750 nm at excitation by VUV synchrotron radiation. The “red” band in 600–1000 nm diapason appears in the PL spectra of crystals doped with chromium ions. The effect of the temperature on the structure, the peak positions and intensities of the luminescence bands was studied. An assumption about the nature of the intrinsic PL was made. The “red” luminescence was considered as a result of the ⁴Т₂ → ⁴А₂ radiation transitions in the impurity Cr³⁺ ions located in the intermediate crystal field.     

VUV–UV spectroscopic properties of RE (RE = Ce, Eu and Tb)-doped KMLn(PO4)2 (M = Ca, Sr; Ln = Y, La, Lu)

The VUV excited luminescent properties of Ce³⁺, Eu³⁺ and Tb³⁺ in the matrices of KMLn(PO₄)₂ (M²⁺ = Ca, Sr; Ln³⁺ = Y, La, Lu) were investigated. The bands at about 155 nm in the VUV–UV excitation spectra are attributed to the host lattice absorption, which indicates that the optical band gap of KMLn(PO₄)₂ is about 8.0 eV. Ce³⁺-doped samples show typical Ce³⁺ emission in the range of 300–450 nm, and the energy transfer from host lattice to Ce³⁺ is efficient. For Eu³⁺-doped samples, the O²⁻–Eu³⁺ CTBs are observed to be at about 228 nm except KSrLu(PO₄)₂:Eu³⁺ (247 nm). As for Tb³⁺-doped samples, typical 4f → 5d absorption bands in the region of 175–250 nm were observed.     

The blue-light emission enhancement mechanism of Eu in Eu, Dy: SiO2 matrix

A Eu, Dy co-doped SiO₂ matrix xerogel with blue emission was prepared by the sol–gel method. Strong blue emission located between 425 nm and 525 nm with a peak at 486 nm is observed under UV laser excitation at room temperature, which is related to a 4f → 5d energy transition of Eu²⁺. Such techniques as FT-IR and TGA–DSC were used to measure the microstructure of the luminescent materials. The influence of Dy³⁺ ions on the luminescent property of Eu²⁺ was investigated. The emission intensity of Eu, Dy-codoped samples is stronger than that of Eu doped samples. The emission enhancement mechanism relating to Eu²⁺ is attributed to an energy transfer involving Dy³⁺ → Eu²⁺. Using energy transition theory, we speculate that the mechanism may be one of the resonance transfers via multi-polar interactions, and present a possible energy transfer model. The Eu²⁺ blue emission intensity reaches the maximum when the Dy³⁺ concentration is 0.1 mol%. When the concentration of Dy³⁺ is 0.3 mol%, a fluorescence quenching appears which might be related to the overlap part of Eu²⁺ excitation and emission levels, and also suggests the existence of Eu²⁺ → Eu²⁺ energy transfer.     

Study on the effect of apatite structure on spectroscopic properties of bismuth activated alkaline earth metal chlorophosphate [M5(PO4)3Cl; M = Ca,Sr and Ba]

The luminescent properties of Bi activated M₅(PO₄)₃Cl (M = Ca, Sr and Ba) prepared under the air and mild reducing conditions (5% H₂ and 95% N₂) were investigated. Results show that all samples present ultraviolet (UV) emissions of Bi³⁺ besides Ba₅(PO₄)₃Cl prepared in reducing condition, which also shows broadband yellow–white and near infrared (NIR) luminescence attributed to univalent bismuth (Bi⁺). Emission data with the size available lattice sites of samples prepared in air suggests there are two types of Bi luminescent center, and each located in one of the two available M²⁺ lattice sites. In the case of Ba₅(PO₄)₃Cl crystal, Bi³⁺ incorporated on Ba²⁺(1) sites can be reduced to Bi⁺ for reasons of charge compensation and size match of ionic radius.     

Spectral analysis of RE (RE = Sm, Dy, and Tm): P2O5–Al2O3–Na2O glasses

Phosphate glasses in the compositions of 70P₂O₅–15Al₂O₃–14Na₂O–1RE³⁺ (RE = Sm, Dy, and Tm) (mol%) were prepared by melt-quenching technique and characterized optically. The differential thermal analysis (DTA) profile of the host glass was carried out to confirm its thermal stability. For all the glasses absorption, photoluminescence and decay measurements have also been carried out. These glasses have shown strong emission and absorption bands in visible and near-infrared (NIR) region. From the measured absorption spectra, Judd–Ofelt (J–O) intensity parameters (Ω₂, Ω₄ and Ω₆) have been calculated for all the studied ions. For Sm³⁺ doped glass, four emission bands centered at 562 nm (⁴G_5/2 → ⁶H_5/2), 598 nm (⁴G_5/2 → ⁶H_7/2), 644 nm (⁴G_5/2 → ⁶H_9/2), and 704 nm (⁴G_5/2 → ⁶H_11/2) have been observed with 402 nm (⁶H_5/2 → ⁴F_7/2) excitation wavelength. Of them, 598 nm (⁴G_5/2 → ⁶H_7/2) has shown a bright orange emission. With regard to Dy³⁺ doped glass, a blue emission band centered at 486 nm (⁴F_9/2 → ⁶H_15/2) and a bright yellow emission at 575 nm (⁴F_9/2 → ⁶H_13/2) have been observed, apart from 662 nm (⁴F_9/2 → ⁶H_11/2) emission transition with an excitation at 388 nm (⁶H_15/2 → ⁴I_13/2,⁴F_7/2) wavelength. Emission bands of 650 nm (¹G₄ → ³F₄) and 785 nm (¹G₄ → ³H₅) transitions for the Tm³⁺ doped glass, with an excitation wavelength at 466 nm (³H₆ → ¹G₄), have also been observed. The stimulated emission cross-sections of all the emission bands of RE³⁺ glasses (RE = Sm, Dy, and Tm) have been computed based on their measured full-width at half maximum (FWHM, Δλ) and measured lifetimes (τ_m).     

White-emitting phosphors Ca6La2Na2(PO4)6F2:Dy and luminescence enhancement through Ce → Dy energy transfer

Ce³⁺ and Dy³⁺ activated fluoro-apatite Ca₆La₂Na₂(PO₄)₆F₂ with chemical formulas Ca₆La_2−xLn_xNa₂(PO₄)₆F₂ (Ln = Ce³⁺, Dy³⁺) were prepared by a solid state reaction technique at high temperature. The vacuum-ultraviolet (VUV) and ultraviolet (UV) spectroscopic properties are investigated. The results indicate that Ce³⁺ ions show the lowest 5d excitation band at ∼305 nm and a broad emission band centered at ∼345 nm. Dy³⁺ ions exhibit intense absorption at VUV and UV range. White-emitting under 172 nm excitation is obtained based on two dominant emissions from Dy³⁺ ions centered at 480 and 577 nm. In addition, the energy transfer from Ce³⁺ to Dy³⁺ in the co-doped samples are observed and discussed.     

A novel red phosphor NaLa4(SiO4)3F: Eu

A novel red phosphor NaLa₄(SiO₄)₃F: Eu³⁺ was synthesized by the conventional solid-state reaction at 950 °C for the first time. The luminescence properties of NaLa₄(SiO₄)₃F: Eu³⁺ were investigated, and the critical concentration of the activator concentration (Eu³⁺) was found to be 0.1 mol per formula unit. The phosphor presented red luminescence under the ultraviolet excitation of 254 or 395 nm, attributed to the transitions from ⁵D₀ excited states to ⁷F_J ( J = 0-4) ground states of Eu³⁺ ions. The results indicated that this newly-developed phosphor could find applications in tricolor fluorescent lamp, phosphor-liquid crystal displays and white lighting devices utilizing GaN-based excitation in the near UV.     

VUV spectroscopy of wide bandgap materials

In this paper we will present VUV spectroscopy experiments performed at the Superlumi station of Hasylab, DESY, Hamburg, on samples of BaF₂ crystals activated with Ce and BaF₂, (Ba,La)F₂ crystals activated with Er. The results of these experiments include time resolved luminescence and luminescence excitation spectra obtained under wavelength selective VUV and UV excitation by pulsed synchrotron radiation.We will reveal the information provided by the VUV/UV excitation spectra of the Ce³⁺ 5d → 4f as well as Er³⁺ 4fⁿ⁻¹5d → 4fⁿ and 4fⁿ → 4fⁿ emissions on energy transfer mechanisms from the fluoride host to the rare earth ion. We will demonstrate that the fast energy transfer channels involve bound excitons while the generation of free electrons and holes leads to slower processes dependant on hole and/or electron trapping.We will demonstrate that differences between the excitation spectra of the 5d → 4f emission in Ce and 4f¹⁰5d → 4f¹¹ emission in Er activated BaF₂ are generated by the coupling of the 4f → 5d transition to the 4f¹⁰ core of the Er³⁺ ion. We will also identify the additional band, absent for Ce, which is due to the exchange split high spin (HS) state of the 4f¹⁰5d configuration responsible for the slow decay of the excited Er³⁺ ions in BaF₂ and (Ba,La)F₂.Finally we will provide evidence and explain why the dominant VUV 4f¹⁰5d → 4f¹¹ Er³⁺ emission in BaF₂ is spin-forbidden and slow while in the mixed (Ba,La)F₂ crystals it is spin-allowed and fast.     

M2Y8(SiO4)6O2: Tb (M = Ca, Sr) phosphors: Sol-gel synthesis from N-2-aminoethylic-3-aminopropyldiethoxysilane and different photoluminescence behavior

M₂Y₈(SiO₄)₆O₂: Tb³⁺ (M = Ca, Sr) phosphors have been synthesized with a new silicon source silane crosslinking reagent (N-2-aminoethylic-3-aminopropyldiethoxysilane [NH₂(CH₂)₂NH(CH₂)₃SiCH₃(OCH₃)₂], abbreviated as AEAPMMS) through the sol-gel process, both of which present the characteristic emission ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) of Tb³⁺ ions. It is interesting to be found that the high energy level blue emission (⁵D₃ → ⁷F_J (J = 6, 5, 4, 3) transition) still can be found in the emission spectrum of Ca₂Y₈(SiO₄)₆O₂: Tb³⁺ while it disappears in the emission spectrum of Sr₂Y₈(SiO₄)₆O₂: Tb³⁺ for the cross-relaxation-induced quenching.     

Effect of Mg and Ti doping on the luminescence of Y2O2S:Eu

The Y₂O₂S:Eu³⁺,Mg²⁺,Ti^IV (x_Eu = 0.028, x_Mg = 0.086, x_Ti = 0.03) materials were prepared with the flux fusion method. According to X-ray powder diffraction, the materials had the hexagonal crystal structure. The emission of Y₂O₂S:Eu³⁺,Mg²⁺,Ti^IV was centered at 627 nm (λ_exc : 250 nm) due to the ⁵D₀ → ⁷F₂ transition of Eu³⁺. The excitation spectra (λ_em : 627 nm) showed broad bands at 240 and 320 nm due to the O²⁻ → Eu³⁺ and S²⁻ → Eu³⁺ charge transfer transitions, respectively. The latter band can also overlap with the Ti → Eu³⁺ energy transfer. In the excitation spectra with synchrotron radiation, in addition to the O²⁻ → Eu³⁺ and S²⁻ → Eu³⁺ charge transfer transitions, excitation over the band gap was observed at 4.8 eV (258 nm). The red persistent luminescence due to the ⁵D₀ → ⁷F₂ emission from Eu³⁺ residing in the regular Y³⁺ site of the host was ca. 10 min with 1 min fluorescent lamp irradiation. In addition, a very broad band was observed at 600 nm probably due to the Ti³⁺ emission.     

Emissions properties of Ho: I7 → I8 transition sensitized by Er and Yb in fluorophosphate glasses

Emission properties of Ho³⁺ at 2.0 μm and the energy transfer mechanism between Yb³⁺, Er³⁺ and Ho³⁺ ions in fluorophosphate glasses are investigated. The measured emission spectra show that the ⁵I₇ → ⁵I₈ transition of Ho³⁺ upon 980 nm laser diode excitation is strong. Judd–Ofelt intensity parameters (Ω_λ, λ = 2, 4, 6), spontaneous transition probability (A_rad), radiative lifetime (τ_r), absorption cross section (σ_a), stimulated emission cross section (σ_e) and FWHM ×  for the transition of Ho³⁺: ⁵I₇ → ⁵I₈ are calculated and discussed. The obtained results show that the present Yb³⁺/Er³⁺/Ho³⁺ triply-doped fluorophosphate glass can be identified to be a promising material at 2.0 μm emission.     

Correlation between structure and photoluminescence of the europium doped glaserite-type phosphate Na2SrMg(PO4)2

A new phosphate Na₂SrMg(PO₄)₂ has been synthesized and investigated by X-ray diffraction, DTA, ³¹P NMR spectroscopy and photoluminescence measurements. This compound crystallizes in the space group P2₁/a of the monoclinic system with the cell parameters: a = 9.158(1) Å, b = 5.267(1) Å, c = 13.498 (1) Å, β = 90.01(1)° and four formula units per cell. Its structure is closely related to that of the mineral glaserite K₃Na(SO₄)₂ and thus it can be described by the general formula XY₂M(TO₄)₂. The X, Y, M and T sites are fully occupied by Sr²⁺, Na⁺, Mg²⁺ and P⁵⁺ cations, respectively. The anionic framework is consisted by the stacking along the [001] direction of two kinds of alternating [MgP₂O₈⁴⁻]_∞ mixed layers parallel to the (a, b) plane and resulting from a corner-sharing between MgO₆ octahedra and PO₄ tetrahedra. The Sr²⁺ cations are located within the interlayer space, while those Na⁺ are found in large cavities bounded to the layers. The DTA analysis showed a congruent melting of this compound at 1374 K. The ³¹P NMR spectroscopy confirmed the presence of two distinct phosphors sites in the structure. Optical studies were performed on the Na₂SrMg(PO₄)₂ compound doped with Eu³⁺ and Eu²⁺. The trivalent europium was used as a local probe, replacing strontium and sodium, what gives complementary and consistent results to the crystallographic analyses. The divalent europium was used to analyze preliminary the potentiality for this compound to be integrated as phosphor in Light Emitting Diode (LED).     

Synthesis and photoluminescence properties of Yb doped Ba5(PO4)3Cl phosphor for white light-emitting diodes

Yb²⁺ ion doped Ba₅(PO₄)₃Cl phosphor was synthesized by solid state reaction. Four distinct absorption bands were observed in the Ultraviolet (UV) light region due to the electronic transitions of Yb²⁺ ion from ¹S₀ ground state to ²F_5/2(t_2g), ²F_5/2(e_g), ²F_7/2(t_2g), and ²F_7/2(e_g) excited states. The main emission wavelength of the phosphor was around 630 nm. The optimized Yb²⁺ ion concentration was 0.2 mol% (λ_exc. = 400 nm). The calculated critical distance was about 8.729 Å and the concentration quenching was observed above 0.2 mol% due to the electric dipole–dipole interaction.     

Luminescence and microstructures of Eu-doped in triple phosphate Ca8MgR(PO4)7 (R = La, Gd, Y) with whitlockite structure

Eu³⁺-doped triple phosphate Ca₈MgR(PO₄)₇ (R = La, Gd, Y) was synthesized by the general high temperature solid-state reaction. This phosphor was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and emission spectra. XRD and FT-IR analysis indicated that Ca₈MgR(PO₄)₇ (R = La, Gd, Y) crystallized in single-phase component with whitlockite-like structure (space group R3c) of β-Ca₃(PO₄)₂. Under the excitation of UV light, the phosphors show bright red emission assigned to the transition (⁵D₀ → ⁷F₂) at 612 nm. The crystallographic sites of Eu³⁺ ions in Ca₈MgR(PO₄)₇ (R = La, Gd, Y) host were discussed on the base of site-selective excitation and emission spectra, luminescence decay and its host crystal structure.     

GeO2 dopant induced enhancement of red emission in CaAl12O19:Mn phosphor

In order to search efficient red-emitting phosphors for white LEDs application, CaAl₁₂O₁₉:Mn⁴⁺ phosphors have been prepared by a combustion method assisted with GeO₂ flux. The influence of GeO₂ concentration and annealing temperature on the structure and luminescence intensity for the phosphors has been investigated. The mechanism for luminescence enhancement has been discussed. At GeO₂ doping concentration of 1.5 mol%, the red emission intensity increases by 81% under 330 nm UVA excitation. More isolated luminescence center Mn⁴⁺ ions rather than pairs of Mn⁴⁺-Mn²⁺ ions are formed in the lattice with the introduction of GeO₂ at high temperature oxidation, leading to the enhancement of the red emission. A feasible new way to enhance the red emission in CaAl₁₂O₁₉:Mn⁴⁺ phosphor is obtained.     

Persistent luminescence of Eu and Dy doped barium aluminate (BaAl2O4:Eu,Dy) materials

Polycrystalline Eu²⁺ and Dy³⁺ doped barium aluminate materials, BaAl₂O₄:Eu²⁺,Dy³⁺, were prepared with solid state reactions at temperatures between 700 and 1500 °C. The influence of the thermal treatments on the stability, homogeneity and structure as well as to the UV-excited and persistent luminescence of the materials was investigated by X-ray powder diffraction, SEM imaging and infrared spectroscopies as well as by steady state luminescence spectroscopy and persistent luminescence decay curves, respectively. The IR spectra of the materials prepared at 250, 700, and 1500 °C follow the formation of BaAl₂O₄ composition whereas the X-ray powder diffraction of compounds revealed how the hexagonal structure was obtained. The morphology of the materials at high temperatures indicated important aggregation due to sintering. The luminescence decay of the quite narrow Eu²⁺ band at ca. 500 nm shows the presence of persistent luminescence after UV irradiation. The dopant (Eu²⁺) and co-dopant (Dy³⁺) concentrations affect the crystallinity and luminescence properties of the materials.