pH and organic solvent‐sensitive properties of crosslinked polymeric spheres formed by a soap‐free emulsion polymerization

Narrowly distributed poly (styrene‐co‐(4‐vinylpyridine)) microspheres are facilely prepared by a soap‐free emulsion polymerization, and their structures and properties are investigated by TEM, FTIR spectra, DSC, and DLS, respectively. The sizes and glass transition temperatures of the polymeric spheres increase with an increase of 4‐vinylpyridine in the reactive system. In addition, these polymeric spheres show good stability in water and a series of organic solvents due to their crosslinked structures. When poly(styrene‐co‐(4‐vinylpyridine)) microspheres are obtained in the reactive system where the weight ratio of 4‐vinyl pyridine to styrene is less than 4/6, they can be well dispersed in water as well as in organic solvents such as ethanol, toluene and DMF, and show obvious pH sensitive and organic solvent‐sensitive characteristics. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel hydrophilic N-halamine polymer with enhanced antibacterial activity synthesized by inverse emulsion polymerization

N-halamine-based antibacterial agents have high efficiency and rechargeable antibacterial properties. However, their applications are limited due to their complex synthetic process and fuzzy antibacterial mechanism. In this study, a novel N-halamine antibacterial polymer was synthesized by inverse emulsion polymerization and characterized by Fourier transform infrared, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. Due to the difficulty of purification, most of the subjects studied previously were hydrophobic polymers, while little research on hydrophilic polymers. In this experiment, this difficulty was overcome by controlling the dosage of sodium hypochlorite and methods of dialysis. Because of the complex cell structure of Gram-negative bacteria, it is difficult for N-halamines to release the oxidizing chlorine into the cell. However, the hydrophilic N-halamines can solve this problem, which showed a stronger antibacterial effect on Gram-negative Escherichia coli synthesized in this study. In addition, the particle size and hydrophilic property of the polymer were changed by changing the amount of initiator, and the differences in their antibacterial properties were studied. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47419.     

Novel, water-based fluorinated polymers with excellent antigraffiti properties

In this article we describe novel, water-based, crosslinkable fluorinated polymers that form coatings with excellent antigraffiti properties. The synthesis of the binders and the surface and bulk properties of their coatings are discussed. The surface properties of these coatings are characterized in terms of their surface-free energy, as calculated from static contact angle measurements. The distribution of the fluorine atoms throughout the coating is measured by X-ray photoelectron spectroscopy (XPS). The bulk properties are studied by determining the crosslink density through dynamic mechanical thermal analysis (DMTA), and the effect of the crosslinking conditions on the crosslink density and the antigraffiti properties is discussed. The results indicate that a combined action of surface and bulk properties gives these coatings their excellent antigraffiti properties. The applicability of these polymers as protective coatings for metal and concrete surfaces are demonstrated. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL     

Swelling and mechanical properties of pH‐sensitive hydrogel filled with polystyrene nanoparticles

We investigated the effect of organic filler and the degree of crosslinking on the performance of a hydrogel/filler system to control its diffusion and mechanical properties. A series of poly(acrylic acid) gels filled with polystyrene (PS) nanoparticles at well‐controlled filler loading levels was synthesized by free radical polymerization in the presence of a crosslinking agent. Three different concentrations of the crosslinking agent (methylene bis‐acrylamide), that is, 5 mg/(g of AAc), 10 mg/(g of AAc), and 20 mg/(g of AAc), were used. The hydrogel crosslinked to the least extent that included a high amount of PS showed fast swelling rates, high equilibrium swelling ratios, and the highest pH sensitivity. Three gel/filler combinations including the gel without filler, gel/filler mixture, and gel/filler copolymerization were considered. The PS particles of ～40 nm in diameter, which were used as the fillers, were prepared by microemulsion polymerization. Copolymerization of styrene and AAc having different reactivities ratios was achieved by a seed‐microemulsion polymerization with the crosslinking agent. The gel/filler mixture showed the highest swelling rate and the gel/filler copolymer resulted in highly enforced mechanical properties and the highest pH sensitivity. The incorporation of filler by copolymerization to mechanically enforce the equilibrium swelling hydrogel was more efficient than the increase of crosslinking degree. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3574–3587, 2013     

Molecular and thermal studies of carbon fiber precursor polymers with low thermal‐oxidative stabilization characteristics

In this investigation, terpolymers, copolymers, and homopolymer of acrylonitrile with dimethylaminopropyl acrylamide (DMAPA), itaconic acid (IA) viz., poly(acrylonitrile‐ran‐3‐dimethylaminopropyl acrylamide‐ran‐itaconic acid) [P(AN‐DMAPP‐IA)], poly(acrylonitrile‐co‐3, dimethylaminopropyl acrylamide) [P(AN‐DMAPP)] were synthesized with varying amounts of comonomers using solution polymerization process. The chemical structure, composition, bonding network were determined employing infrared, 1H and, 13‐carbon nuclear magnetic resonance spectroscopic techniques. Molecular characteristics of as‐synthesized polymers such as different kinds of average molecular weights, molecular weight distribution were estimated applying solution viscometry and size exclusion chromatography. The influence of comonomers (DMPAA, IA) on the thermal stabilization characteristics of acrylonitrile terpolymers in comparison with copolymers and homopolymers of acrylonitrile were studied using differential scanning calorimetry (DSC), hyphenated thermal techniques (thermal gravimetry coupled with differential thermal analyzer).The DSC curves of P(AN‐DMAPP‐IA) exhibit a distinct broader bimodal peaks with thermal exotherm initiating at as low as 165 °C, and followed by two peaks with temperature difference of 42 °C, releasing the evolved heat at a release rate of 0.7–0.11 J g^?1s^?1over 10 min as compared to 1.2, 7.5 J g^?1s^?1 in 4.5, 2 min as observed in P(AN‐DMAPP), polyacrylonitrile, respectively. The thermal stability of P(AN‐DMAPP‐IA) and P(AN‐DMAPP), as evidenced by TGA‐DTA was found to be higher than PAN homopolymers. Specific heat capacity measurements confirmed the DSC results. Bulk densities of P(AN‐DMAPP‐IA) were in the range 0.31–0.35 g/cc. These results confirm the low‐temperature stabilization characteristics and suitability of P(AN‐DMAPP‐IA) as low cost carbon fiber precursor polymers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46381.     

Copolymers of glycerol and propylene glycol diglycidyl ethers with aromatic dithiols

Monomers derived from renewable recourses have the potential to become the biobased alternatives for petroleum derived chemicals in the production of polymers. Glycerol, the byproduct of biodiesel refining, and propylene glycol derived from glycerol are promising candidates which can be used in the synthesis of polymers as they are or after chemical modification. The new copolymers of glycerol and propylene glycol diglycidyl ethers with aromatic dithiols were synthesized and investigated in this study. Their chemical structures were confirmed by IR, ¹H‐NMR spectroscopy, and gel permeation chromatography. The dependencies of the mechanical, thermal properties, swelling in the different solvents, biodegradability, and bioresistance of synthesized copolymers on their chemical structures were studied. The properties of some synthesized copolymer films were found to be comparable with those of commodity polymer films. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4367–4374, 2013     

The colloidal properties of alkaline‐soluble waterborne polymers

Waterborne polymer dispersions are widely used in coatings and graphic arts markets as environmentally friendly and more sustainable alternatives to solvent borne binders. Traditionally, waterborne (meth)acrylic dispersions are prepared by emulsion polymerization using low molar mass surfactants as a key ingredient to control particle size. However, these surfactants can have a negative influence on the performance of coatings such as reduced water resistance and adhesion. To mitigate the negative effects of surfactants, polymer latexes have been developed that employ alkaline‐soluble polymers as the sole stabilizer for a subsequent emulsion polymerization step. In this way surfactant‐free polymer dispersions are obtained. Despite the high commercial impact and relevance of this technology, fundamental studies regarding the physicochemical properties of the alkaline‐soluble polymers are lacking. In this article, the synthesis and colloidal properties of alkaline‐soluble waterborne methacrylic copolymers are reported. The dissolution behavior and colloidal properties of these alkaline‐soluble polymers were studied as function of molar mass, acid content, and pH. The dissolving polymer particles were characterized using static and dynamic light scattering, static and dynamic surface tension measurements, and cryogenic‐transmission electron microscopy analysis. It is concluded that the dissolution mechanism of alkaline‐soluble polymers follows a gradual process. As the pH increases deprotonation of the carboxylic acid groups swells the particle enhancing the further swelling with water. At a certain amount of base, the particles disintegrate into small polymer aggregates while the most water‐soluble polymer chains are dissolved in the water phase. An important learning is that part of the alkaline‐soluble polymer resides in very small particles (<5 nm). The formation of these polymer particles below 5 nm was not reported previously and offers a new insight into the dissolution mechanism of alkaline soluble polymers. The most important parameter steering this process is the acid value of the polymer, while the molar mass plays a modest role. The understanding gained in this study can be used to further advance alkaline‐soluble polymers as stabilizer in surfactant‐free emulsion polymerization technology, improving the performance of a wide range of industrially relevant coatings. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46168.     

The effect of nonionic monomer HAM on properties of cationic surfactant‐free acrylic/alkyd hybrid emulsion

A series of cationic acrylic/alkyd resin (CPAAR) hybrid emulsions was successfully prepared through surfactant‐free emulsion polymerization, using methacryloxyethyltrimethyl ammonium chloride, methyl methacrylate, butyl acrylate and alkyd resin as reaction monomers. And nonionic N‐hydroxymethyl acrylamide (HAM) of different content was simultaneously incorporated into the CPAAR backbone. The structure of CPAAR copolymer was characterized by Fourier transform infared spectrometer, and then the effect of HAM content on properties of CPAAR emulsions was studied by particle size analyzer, transmission electron microscopy and rheometer. In addition, thermal properties, water absorption and contact angle of CPAAR latex films were also investigated. The results showed that the CPAAR emulsions prepared with 4.9 wt % HAM displayed smallest average particle size of 92.2 nm. As HAM content increased from 0 to 19.6 wt %, the initial viscosity of the emulsions increased from 22.48 to 53 mPa.s. At the same time, the emulsions transferred from Newtonian fluid to pseudoplastic fluid, and a transition from viscous liquid to elastic liquid was also detected. Meanwhile, the degradation temperature at 5% weight loss increased by 30.59°C. In addition, with increasing HAM content from 0 to 4.9 wt %, the water absorption and surface free energy of films increased by 4.42% and 5.02 mJ m^?2, respectively. However, the water absorption and surface free energy kept almost invariable with further increase in HAM content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41406.     

High pressure semibatch emulsion and miniemulsion copolymerization of vinyl acetate and ethylene

This study presents the experimental study of semibatch emulsion and miniemulsion copolymerization of vinyl acetate (VAc) and ethylene to vinyl acetate-ethylene (VAE) copolymer at 60°C and 80–300 psig. In the miniemulsion copolymerization, a water-soluble initiator (K₂S₂O₈) is used and VAc miniemulsion is prepared in presence of surfactant and cosurfactant using a sonicator or a high-shear homogenizer. Then, ethylene gas is supplied to the reactor at constant partial pressure. In a miniemulsion process, the mass transfer limitations of VAc from monomer droplets to the aqueous phase, and to micelles or polymer latex particles that are present in conventional macro-emulsion polymerization can be eliminated and the transfer of ethylene dissolved in the aqueous phase to the miniemulsion droplets is the major ethylene transport process for the polymerization. The experimental data show that the amount of ethylene incorporation into the copolymer is higher in miniemulsion polymerization than in emulsion polymerization. The ethylene pressure has been found to have a strong impact on the ethylene incorporation into the copolymer phase in both emulsion and miniemulsion copolymerizations but the increase is more pronounced in miniemulsion case. The VAE copolymer latex particles prepared by miniemulsion polymerization exhibited higher storage stability than those prepared by macro-emulsion polymerization.     

Tough and self-healing hydrophobic association hydrogels with cationic surfactant

Hydrophobic association (HA) hydrogels with outstanding mechanical, rheological and recovery properties were successfully synthesized by micellar copolymerization of acrylamide with lauryl methacrylate. The synthesis occurred at room temperature and the synthesis condition was moderate by using the redox initiator system of Ammonium persulfate - sodium bisulfite as initiators. Cationic surfactant (dodecyl trimethyl ammonium bromide) was utilized to form micelles with hydrophobe, served as physical cross-linking points in the 3D networks of hydrogels. The HA hydrogels showed a high tensile strength of 181 kPa, superior stretchability of 2300% and excellent toughness of 2.16 MJ m⁻³. Moreover, they owned extraordinary self-recovery under different conditions. It is hopeful that the hydrogels with superior mechanical strength and self-healing properties would be applied to the fields of biomedicine and engineering. Meanwhile, based on above materials, HA hydrogels could also be synthesized with the combination of hydrophobic association and other synergistic effects, such as latex particles, electrostatic effect and nanoparticles.     

New polyurea MWCNTs nanocomposite films with enhanced mechanical properties

Polyurea nanocomposites represent a promising option in the development of advanced materials for applications that require high mechanical resistance. This article describes an optimized synthetic route for obtaining polyurea nanocomposites with enhanced mechanical properties by employing epoxy‐functionalized multiwalled carbon nanotubes (MWCNTs) as reinforcing agent. The experimental measurements revealed that these functionalized nanofillers have a positive effect on the properties of the composite only until they reach a certain concentration; therefore, the optimal composition was reported (the samples containing 0.2 weight % functionalized MWCNTs). The functionalization of the MWCNTs was confirmed through RAMAN, X‐ray photoelectron spectroscopy, scanning electron microscopy and thermogravimetric analysis, while the polyurea nanocomposites obtained have been characterized by thermal (differential scanning calorimetry and TGA) and mechanical (dynamic mechanical analysis and tensile tests) analyses. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45061.     

Design of the phthalonitrile‐based composite laminates by improving the interfacial compatibility and their enhanced properties

Phthalonitrile containing benzoxazine (BA‐ph) and cyanate ester (CE) were chosen as the thermosetting matrix and the glass fiber (GF) reinforced laminates formed at low temperature were designed. The polyarylene ether nitriles containing pendent carboxyl groups (CPEN) was selected to modify the interfacial interaction between the resin matrix and GFs. Two methods of introducing CPEN were compared and the effects of CPEN on curing behaviors and properties of the composites were investigated. Results showed that with the CPEN, exothermic peaks shifted to lower temperature and curing temperatures of BA‐ph/CE decreased slightly. The mechanical and thermal properties of GF‐reinforced composites were discussed and the results indicated that the composites of modified GFs with CPEN exhibited outstanding mechanical properties, higher glass transition temperature (T_g > 290 °C) than that of composites composed of CPEN mixed with BA‐ph/CE. Moreover, GF‐reinforced composites showed stable dielectric constants (3.8–4.5) and low dielectric loss (0.005–0.01), which were independent of the frequency. In sum, the various methods of the introduction of CPEN in the GF‐reinforced composites may provide a new route to prepare improved composites, meanwhile, composites with outstanding processability and excellent mechanical and thermal properties are expected to be widely applied in the fields of high‐performance structural materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45881.     

Acrylic copolymers crosslinked by click chemistry: Some aspects of synthesis,curing, and crosslinking

Acrylic polymers bearing pendant azide and propargyl groups were synthesized by chemical transformation of epoxy‐ and carboxylic functional acrylic precursor polymers and were characterized. These copolymers were crosslinked by reacting them in the presence of Cu(I) catalyst via the azide–alkyne click reaction leading to triazole networks. Influence of catalyst concentration on the crosslinking cure kinetics was investigated, and the activation parameters were evaluated. The activation energy decreased from 90 kJ mol^?1 to 25 kJ mol^?1 on catalyzing the cure reaction as estimated by Ozawa method. Differential scanning calorimetric analysis indicated thermal decomposition of the residual azide groups at around 200–220°C, which was catalyzed by Cu(I) with associated activation energy of 130–94 kJ mol^?1. Isothermal cure reaction and decomposition of the azide groups were predicted using these parameters. Estimation of crosslink density by solvent swelling and dynamic mechanical analyses showed a normal crosslinking behavior. While the solvent swelling rate and the equilibrium swelling decreased, the front factor and diffusion coefficient of swelling showed a transition from non‐Fickian to Fickian as the triazole concentration increased in the network. The click reaction offered an alternate means to crosslink acrylate polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1289‐1300, 2013     

Synthesis and evaluation of fluorosilicone‐modified starch for protection of historic stone

Starch is sensitive to moisture and is weak to durability in the protection application to ancient relics. Therefore, two fluorosilicone‐modified starches are firstly prepared and evaluated for the protection of historic stones. The fluoro‐silicone copolymer grafted starch of P(VTMS/12FMA)‐g‐starch is synthesized by grafting copolymer of vinyltrimethoxysilane (VTMS) and dodecafluoroheptyl methacrylate (12FMA) onto starch. While the fluoro‐silicone starch latex of VTMS‐starch@P(MMA/BA/3FMA) is obtained by emulsion polymerization of VTMS primarily grafted‐starch (VTMS‐starch) with methyl methacrylate (MMA), butyl acrylate (BA) and 2,2,2‐trifluoroethyl methacrylate (3FMA). The grafting fluorosilicone copolymer onto starch improves obviously their hydrophobic and thermal properties. Comparatively, VTMS‐starch@P(MMA/BA/3FMA) film performs higher water contact angle (107°) and thermal stability (350–430°C) than p(VTMS/12FMA)‐g‐starch film (72°, 250–420°C) due to the migration of fluorine‐containing group onto the surface of film during the film formation. Therefore, VTMS‐starch@P(MMA/BA/3FMA) shows much better protective performance in water‐resistance, and salt/freeze‐thaw resistance for stone samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41650.     

Polyurethane‐acrylic hybrid emulsions with high acrylic/polyurethane ratios: Synthesis,characterization, and properties

Allyl polyoxyethylene ether (APEE) was used as coupling agent between polyurethane (PU) and acrylic polymer (AC) to synthesize stable waterborne polyurethane‐acrylic (PU‐AC) hybrid emulsions with high AC/PU weight ratio ranged from 45/55 to 70/30. The effect of the AC/PU weight ratio and the acrylate type including methyl methacrylate (MMA), butyl acrylate (BA) and mixture of them on the properties of the synthesized emulsions and resultant films were investigated. The research results showed that the colloidal particle of the emulsions behaved core‐shell structure, and the copolymers were not crosslinked. An increase in the AC/PU weight ratio led to an increase in the average particles size and the particle size distribution, but decrease in the viscosity of the emulsions. Meanwhile, the molecular weight distribution of the copolymers became wide, and the tensile stress, shore A hardness, storage modulus, glass transfer temperature, water resistance, and water contact angle of the resultant films increased, except that the films of PU‐BA were too soft to determine their mechanical properties. MMA and BA can provide the PU‐AC hybrid emulsions with very different properties, and which can be adjusted according to the special application. It was suggested that APEE can not only built up chemical bonds between PU and AC, but also increase the self‐emulsifying ability in the emulsion polymerization due to its hydrophilic ethylene oxide and carboxylic groups, resulting in that PU‐AC hybrid emulsions with high AC/PU ratio can be obtained by this method. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44488.     

Dielectric elastomer film with anisotropic actuation deformation on film plane

A new dielectric elastomer (DE) film, which was able to show anisotropic large plane deformation actuated by an external electric field, was designed and synthesized. Specifically, an asymmetric di-vinyl monomer cyclohex-3-enylmethyl acrylate (CEA) was incorporated into the middle block of poly(styrene-b-butyl acrylate-b-styrene) as potential crosslinking points. By widely used UV curing technique through a mask, the DE films could be locally hardened any area one selected. This could break the symmetry of the actuation deformation on the DE film plane, maximizing the deformation in a given direction while the actuation area strain remained unchanged. The actuation strain_y/strain_x reached 2.3, strain in x direction was 10.3% while in y direction was 23%, when the DE film of S(BA-ran-CEA)S with 2.5 mol % CEA incorporated was locally hardened in the form of soft and hard belt of 1 mm width alternatively along y direction. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48795.     

Styrene/acrylate copolymer emulsions as strengthening agents for kraft bagasse pulp: A way for enhancing the mechanical properties of paper

Although styrene acrylate emulsions (SAE) have demonstrated promising applications as surface sizing agents for paper, their strengthening effect on pulp fibers in papermaking is not clear. In this study, bagasse fibers, an agricultural waste, were treated with SAE to study the influences on the mechanical properties of the produced papers. SAE copolymers with hard chain (H-PSA) and soft chain (S-PSA) were prepared and added to bagasse pulp slurry at concentrations of 1%–4% by weight. The findings indicated that for the soft and hard copolymers, the glass transition temperatures were 19.5 and 26.8°C and their emulsion particle sizes were 166 and 182 nm, respectively. The copolymers strengthened the produced paper by wrapping around and forming a network of chemical and physical bonds with the pulp fibers. Papers treated with 3% H-PSA exhibited the optimum improvement in tensile strength (38 MPa) and breaking length (67 m) by 13% and 64%, respectively. Treated papers were negatively affected by UV radiation due to phenyl groups spread along the chains. The copolymers demonstrated good wet-strength properties achieved by self- and co-crosslinked networks. The prepared paper sheets showed a preference for the mechanical properties of treated samples over the untreated ones.     

Poly(acrylic acid)/poly(acrylamide) hydrogel adsorbent for removing methylene blue

Cationic dye can cause severe damage to the environment due to their refractory degradation, complex composition and strong stability. Hydrogels as adsorbents have been widely used to treatment the wastewater with dyestuff for their low prices, simple operations, and high efficiency. This work uses poly(acrylic acid) (PAA)/poly(acrylamide)(PAM)/calcium hydroxide nanoparticles (CHN) polymeric hydrogel absorbent to eliminate methylene blue (MB) dye. First, PAM/PAA/CHN hydrogel is produced through copolymerization of acrylic acid monomer and acrylamide monomer using inorganic CHN as cross-linker. And then, the adsorption performance of such PAM/PAA/CHN hydrogel adsorbent for adsorbing MB dye is explored at different conditions including pH, contacting time, adsorbent dosage, initial concentration of MB, and temperature. A maximum adsorption capability for adsorbing MB reaches 1,056 mg/g. Furthermore, the pseudo-first-order mode and Langmuir isotherm model can well describe adsorption behavior of MB dye onto such PAA/PAM/CHN hydrogel adsorbent. Thereby, as-prepared PAA/PAM/CHN hydrogel could be a potential adsorbent for eliminating organic dyes from wastewater.     

Oxygen barrier property of synthesized polyacrylate coatings containing inter-chain cross-linking architecture on PET film

A series of coatings which applied for improving the oxygen barrier property of polyethylene terephthalate (PET) film were prepared based on the copolymerization of methyl methacrylate, methyl acrylate, diallyl maleate, and maleic acid (MA). The chemical structures of the coatings were characterized by Fourier Transform Infrared spectrometer. The curing behavior was analyzed by differential scanning calorimetry. The oxygen permeability (Po₂) was measured by gas permeability tester . The molecular weight was investigated by gel permeation chromatography (GPC). Po₂ is inversely proportional to the oxygen barrier property that the decrease of Po₂ indicates the improvement of oxygen barrier property. The coating containing inter-chain cross-linking structure formed by the dehydration of carboxylic acid improves the oxygen barrier property of PET film greatly. With the increasing content of MA, the oxygen barrier capability of coated PET film is enhanced according to the Po₂ decreasing from 1.450 to 0.8956. The Po₂ of coated PET film is minimized by selecting N-methyl pyrrolidone as solvent for polymerization. The GPC results indicate that the oxygen barrier of novel coated PET film can be obtained when the weight average molecular weight (Mw) is up to the stipulated value.     

Novel TiC-based composites with enhanced mechanical properties

Novel TiC-based composites were synthesized by reactive hot-pressing at 1800 °C for 1 h with ZrB₂ addition as a sintering aid for the first time. The effects of ZrB₂ contents on the phase composition, microstructure evolution, and mechanical properties were reported. Based on the reaction and solid solution coupling effects between ZrB₂ and TiC, the product ZrC may be partially or completely dissolved into the TiC matrix, and then phase separation within the miscibility gap is observed to form lamellar nanostructured ZrC-rich (Zr, Ti)C. The TiC-10 mol.% ZrB₂ (starting batch composition) exhibits good comprehensive mechanical properties of hardness 27.7 ± 1.3 GPa, flexural strength 659 ± 48 MPa, and fracture toughness of 6.5 ± 0.6 MPa m^1/2, respectively, which reach or exceed most TiC-based composites using ceramics as sintering aids in the previous reports.