Study of the orientation‐controlled damping temperature based on selective distribution of oligo‐phenol in acrylate rubber/chlorinated butyl rubber blends

In this paper, a series of composites containing of the oligo‐phenol (produced by reacting of 4‐methyl‐phenol with dicyclopentadiene and isobutylene (MPDI)) as organic fillers, and chlorinated butyl rubber (CIIR)/acrylate rubber (AR) as matrix were prepared by melting blending method. The selective distribution phenomenon of organic fillers in the matrix and the damping properties of AR/CIIR/MPDI composites were characterized by DMA, DSC, FT‐IR and SEM, respectively. The results showed that MPDI could form hydrogen bond with AR more easily than with CIIR, which resulted in MPDI dispersing preferentially in AR phase in CIIR/AR composites. And the selective dispersion of MPDI caused that the damping temperature range was orientedly broadened towards the high temperature. Specially, with the content of MPDI increased to 10 wt% in AR/CIIR marix, only the T_g of AR in AR/CIIR composites shifted to higher temperature, which reached to 55.2°C, while the T_g and T_ll of CIIR in AR/CIIR composites kept almost unchanged. Otherwise, the temperature range of AR/CIIR/MPDI was expanded to 100.2°C with the tan δ > 0.3. Therefore, it was expected as a promising way to orientedly broaden damping temperature range according to the selective distribution of organic additives in binary systems. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Effect of organic modification on structure and properties of room‐temperature vulcanized silicone rubber/montmorillonite nanocomposites

The aim of this work was to study the effect of different organomontmorillonite on the structure and properties of room‐temperature vulcanized silicone rubber (RTV) composites. Quaternary ammonium salts (QAS) and hyperbranched QAS were used as intercalation agents to treat Na⁺‐montmorillonite and formed two kinds of organomontmorillonite, OMMT and HOMMT. OMMT/RTV and HOMMT/RTV composites were prepared using these organomodified silicate layers. Properties such as tensile strength, elongation at break, swelling behavior, and thermal stability were researched and compared. The addition of OMMT and HOMMT improved the mechanical properties of RTV composites. The composites with 3 mass % HOMMT showed the highest tensile strength and elongation at break, 5.4 MPa and 425%, which was 29 and 97% higher than that of pure RTV. The RTV composites exhibited excellent thermal stability and swelling behavior. At loading of 3 mass % of HOMMT, T_onset, and T_max was 452 and 640°C, respectively, 33 and 150°C higher than that of pure RTV. A combination of X‐ray diffraction (XRD) test, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies was used to characterize the structure and reinforcing mechanism of these clays. The diffraction peaks in XRD curves were almost absent in the scattering curve of RTV/HOMMT (3 mass %). This was due to the possibility of having exfoliated silicate layers dispersed in the polymer matrix. A careful observation of an area of platelet tactoid of 3% HOMMT filled composite in SEM and TEM revealed the uniform dispersion of the silicate layers in the composites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymerizable ionic liquids for the preparation of polystyrene/clay composites

Polymerizable ionic liquids (ILs) 1‐methyl‐3‐(4‐vinylbenzyl)imidazolium chloride, 1‐hexyl‐3‐(4‐vinylbenzyl)imidazolium chloride and 1‐dodecyl‐3‐(4‐vinylbenzyl)imidazolium chloride were prepared and used as new surfactants for the modification of montmorillonite (MMT). Functionalized MMTs were prepared by cationic exchange between sodium MMT and each of the ILs. Polystyrene (PS)/MMT composites were subsequently prepared by in situ intercalative free radical polymerization of styrene containing dispersed organophilic MMT. Exfoliation of MMT in the PS matrix was achieved only for MMT functionalized with the 1‐dodecyl‐3‐(4‐vinylbenzyl)imidazolium‐based IL as revealed by X‐ray diffraction and electron microscopy. The exfoliated composites showed good transparency and higher decomposition temperature than virgin polymer matrix, particularly pronounced under air atmosphere (ΔT_max = 66 °C), data comparable to or even greater than those reported in the literature for exfoliated PS nanocomposites. Copyright © 2012 Society of Chemical Industry     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Processing thermal stability and degradation kinetics of poly(vinyl chloride)/montmorillonite composites

Thermal stability of polyvinyl chloride (PVC) based montmorillonite composites with either sodium montmorillonite (MMT) or alkyl ammonium ion modified montmorillonite (OMMT) were investigated by thermogravimetric analysis. The apparent activation energies associated with the first thermal degradation stage were calculated by the methods of Flynn–Wall–Ozawa and Kissinger in nitrogen atmosphere at several different heating rates. The processing thermal stability of PVC and PVC/MMT(OMMT) composites was also discussed. Increase of mixing torque did not result in a larger intercalation extent of PVC on MMT; instead, it unexpectedly induced discoloration of PVC and then deteriorated the processing stability, especially in the presence of OMMT. The apparent activation energies in the first thermal degradation stage exhibited little difference among PVC, PVC/MMT, and PVC/OMMT composites, and the kinetic compensation effect of S_p^* kept a constant value, indicating that the thermal stability and thermal degradation mechanism of PVC were not affected by the presence of either MMT or OMMT, although the processing discoloration of PVC is observed for PVC/OMMT composite. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1521–1526, 2004     

One‐pot synthesis of hyperbranched poly(aryl ether ketone)s for the modification of bismaleimide resins

Hyperbranched poly(aryl ether ketone)s with hydroxyl end groups (HBP‐OH) and high degree of branching value (83%) were synthesized via an A₂ + B₃ approach. The polymerization conditions (e.g., polymerization temperature and time, monomer concentration, stoichiometric ratio of functional groups) were explored to avoid the gelation. Allyl‐terminated hyperbranched PAEKs (HBP‐AL) with low molecular weight (M_n = 3.4 × 10³) and narrow polydispersity (PDI = 1.65) were obtained via the etherification of HBP‐OH and it has been used for the modification of bismaleimide (BMI) resins. The prepolymers showed good processibilities with a viscosity below 0.6 Pa s at 110°C, though the viscosities slightly increased as the increase of HBP‐AL contents. The cured BMI resins showed high glass transition temperatures (T_g > 320°C) and good thermal stabilities (T_d > 400°C, both in nitrogen and air). It is inspiring to note that the incorporation of HBP‐AL into BMI matrix results in a significant enhancement of toughness without any noticeable loss in modulus, processibility, and T_g. POLYM. ENG. SCI., 54:1675–1685, 2014. © 2013 Society of Plastics Engineers     

Synthesis and characterization of poly(urethane‐benzoxazine)/clay hybrid nanocomposites

Poly(urethane‐benzoxazine)/clay hybrid nanocomposites (PU/Pa–OMMTs) were prepared from an in situ copolymerization of a polyurethane (PU) prepolymer and a monofunctional benzoxazine monomer, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (Pa), in the presence of an organophilic montmorillonite (OMMT), by solvent method using DMAc. OMMT was made from cation‐exchange of Na‐montmorillonite (MMT) with dodecyl ammonium chloride. The formation of the exfoliated nanocomposite structures of PU/Pa‐OMMT was confirmed by XRD from the disappearance of the peak due to the basal diffraction of the layer‐structured clay found in both MMT and OMMT. DSC showed that, in the presence of OMMT, the curing temperature of PU/Pa lowered by ca. 60°C for the onset and ca. 20°C for the maximum. After curing at 190°C for 1 h, the exothermic peak on DSC disappeared. All the obtained films of PU/Pa–OMMT were deep yellow and transparent. As the content of OMMT increased, both the tensile modulus and strength of PU/Pa–OMMT films increased, while the elongation decreased. The characteristics of the PU/Pa–OMMT films changed from plastics to elastomers depending on OMMT content and PU/Pa ratio. PU/Pa–OMMT films also exhibited excellent resistance to the solvents such as tetrahydrofuran, N,N‐dimethylformamide and N‐methyl‐2‐pyrrolidinone. The thermal stability of PU/Pa were enhanced remarkably even with small amount of OMMT. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4075–4083, 2003     

Influence of the clay modification and compatibilizer on the structure and mechanical properties of ethylene–propylene–diene rubber/montmorillonite composites

Ethylene–propylene–diene rubber (EPDM)/montmorillonite (MMT) composites were prepared through a melt process, and three kinds of surfactants with different ammonium cations were used to modify MMT and affect the morphology of the composites. The morphology of the composites depended on the alkyl ammonium salt length, that is, the hydrophobicity of the organic surfactants. Organophilic montmorillonite (OMMT), modified by octadecyltrimethyl ammonium salt and distearyldimethyl ammonium salt, was intercalated and partially exfoliated in the EPDM matrix, whereas OMMT modified by hexadecyltrimethyl ammonium chloride exhibited a morphology in which OMMT existed as a common filler. Ethylene–propylene–diene rubber grafted with maleic anhydride (MAH‐g‐EPDM) was used as a compatibilizer and greatly affected the dispersion of OMMT. When OMMTs were modified by octadecyltrimethyl ammonium chloride and distearydimethyl ammonium chloride, the EPDM/OMMT/MAH‐g‐EPDM composites (100/15/5) had an exfoliated structure, and they showed good mechanical properties and high dynamic moduli. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 638–646, 2004     

The effect of hybrid nanoparticle additives on epoxy‐nanocomposite behavior and morphology

Amine modified polyhedral oligomeric silsesquioxane (POSS‐NH₂) was used to modify sodium montmorillonite (MMT) nanoclays for improved dispersion in epoxy resin. The dispersion of the clay particles was inspected using scanning electron microscopy, energy dispersive spectroscopy (EDS) and X‐Ray diffraction and the thermal properties compared using differential scanning calorimetry (DSC) and thermogravametric analysis. The introduction of the amine‐POSS was found to have a positive effect on the dispersion of the MMT clays and prevented agglomeration. The absence of clay agglomerates lead to an increase in glass transition temperature (T_g) from 44°C in the samples with the untreated clay up to 54°C in the samples with 10% additional POSS‐NH₂. The addition of POSS‐NH₂ initial increase of the weight loss (T_{d 5%}) but slowed down the rate of degradation due to the formation of an inert silica layer and eventually leading to an increased charyield. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Unsaturated polyester/montmorillonite nanocomposites with improved mechanical and thermal properties fabricated by in situ polymerization

Although organically modified montmorillonite (OMMT) has been incorporated into unsaturated polyester (UP) resin to enhance properties, the aggregation often leads to defects which directly affect the properties of nanocomposites. In this work, OMMT slurry modified by a new allyl surfactant with carbon–carbon double bond, hexadecyl allyl dimethyl ammonium chloride (C₁₆‐DMAAC), was employed to prepare nanocomposites by in situ polymerization. The results illustrated that the existence of OMMT slurry helped monomers enter the OMMT galleries, leading to well‐dispersed OMMT in the UP matrix. The mechanical properties and thermal properties of OMMT nanocomposites were improved. With OMMT loading of 5 wt %, the tensile strength and flexural strength can be improved by 22% and 38%, respectively. Meanwhile, the onset thermal decomposition temperature (T_–10) value was ameliorated from 310.6 °C to 330.6 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45251.     

Synthesis and characterization of poly(methyl methacrylate)/montmorillonite nanocomposites by in situ bulk polymerization

Poly(methyl methacrylate)/montmorillonite (MMT) nanocomposites were prepared by in situ bulk polymerization. The results showed that the silicone coupling agent affected the structure and properties of hybrid materials. XRD analysis showed that the dispersion of clay in nanocomposites with silicone‐modified organophilic MMT was more ordered than that in nanocomposites with unmodified organophilic MMT. The glass transition temperature (T_g) of the nanocomposites was 6–15°C higher and the thermal decomposition temperature (T_d) was 100–120°C higher than those of pure PMMA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2256–2260, 2003     

Synthesize and characterization of styrene‐N‐phenyl maleimide/montmorillonite nanocomposites prepared through emulsion polymerization

Composites of organomodified (OMMT) and pristine montmorillonite (MMT) intercalated by styrene‐N‐phenyl maleimide (PMI) copolymer were prepared by emulsion intercalative polymerization. X‐ray diffraction (XRD) and transmission electron microscopy results show that the dispersability of clay in the matrix was greatly improved by the incorporation of polar moiety PMI. The dispersability of OMMT in the matrix is better than MMT. XRD patterns of the extracted nanocomposites showed that d₀₀₁ of the clay are much larger than that of the original OMMT and MMT, which indicates that the interaction of copolymer with the clay layers was greatly improved by incorporation with polar monomer PMI. The thermal property of the composites was greatly improved by the intercalation with clay. The DSC results showed that the glass transition of the composites became inconspicuous, which indicated that the movement of the polymer segment was extremely confined by the clay layer. The consistency factor of the melts of the composites increased monotonically with a decreasing flow index showing stronger shear thinning property of the composites. The rheological activity energy of the composites decreased more than that of the pure copolymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1010–1015, 2005     

Photodegradation of some low‐density polyethylene–montmorillonite nanocomposites containing an oligomeric compatibilizer

The photo‐oxidation behavior at the exposed surfaces of maleated low‐density polyethylene [LDPE poly(ethylene‐co‐butylacrylate‐co‐maleic anhydride) (PEBAMA)] and montmorillonite (MMT) composites was studied using attenuated total reflection Fourier transform infrared spectroscopy, X‐ray diffraction (XRD), transmission electron microscopy (TEM), and mechanical testing. Two different MMT clays were used with the maleated polyethylene, an unmodified clay, MMT, and an organically modified montmorillonite (OMMT) clay which was significantly exfoliated in the composite. The morphologies of sample films were examined by XRD and TEM. The results were explained in terms of the effect of the compatibilizing agent PEBAMA on the clay dispersion. It was found that the OMMT particles were exfoliated in the polymer matrix in the presence of the PEBAMA, whereas the MMT clay particles were agglomerated in this matrix. Both mechanical and spectroscopic analyses showed that the rates of photo oxidative degradation of the LDPE‐PEBAMA–OMMT were higher than those for LDPE and LDPE‐PEBAMA–MMT. The acceleration of the photo‐oxidative degradation for LDPE‐PEBAMA–OMMT is attributed to the effects of the compatibilizer and the organic modifier in the composite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40788.     

Chlorinated butyl rubber/two-step modified montmorillonite nanocomposites: Mechanical and damping properties

Montmorillonite (MMT) was modified by ultrasound and castor oil quaternary ammonium salt intercalation method to prepare a new type of organic montmorillonite (OMMT). The surface structure, particle morphology, interlayer distance, and thermal behavior of the samples obtained were characterized. The modified OMMT was then added to chlorinated butyl rubber (CIIR) by mechanical blending, and a composite material with excellent damping properties was obtained. The mechanical experiment results of CIIR nanocomposites showed that the addition of OMMT improved their tensile strength, hardness, and stress relaxation rate. Compared with pure CIIR, when the content of OMMT was 5 phr (part per hundred of rubber), the tensile strength of the nanocomposite was increased by 677% and the elongation at break was also increased by 105.4%. The enhancement of this performance was mainly due to the dispersion of the nanosheets in CIIR rubber and the chemical interaction between the organoclay and the polymer matrix, which was confirmed by morphology and spectral analysis. OMMT also endowed a positive effect on the damping properties of CIIR nanocomposites. After adding 5 phr of OMMT, the nanocomposite owned the best damping performance, and the damping factor, tanδ_max, was 37.9% higher than that of pure CIIR. Therefore, the good damping and mechanical properties of these CIIR nanocomposites provided some novel and promising methods for preparing high-damping rubber in a wide temperature range.     

Influence of organic montmorillonite nanoparticles on the microstructures and thermal and tribological properties of polyethersulfone and polytetrafluoroethylene composites

Because of high wear rate and low thermal deformation temperature, the generalization and application of polytetrafluoroethylene (PTFE) in the field of tribology is restrained to a certain extent. In order to improve the wear resistance and thermal stability of this self‐lubricating polymer, organic montmorillonite (OMMT) nanoparticle reinforced polyethersulfone (PES) and PTFE ternary composites were prepared by the cold molding and vacuum sintering technology. The effects of sodium montmorillonite (Na‐MMT) and OMMT on the microstructures, thermal stabilities and tribological properties of PTFE composites were comparatively studied. The results show that the thermal stability of the PES/PTFE composites is clearly improved by the incorporation of OMMT nanoparticles. Not only the friction coefficients but also the wear rates of OMMT/PES/PTFE composites are less than those of Na‐MMT/PES/PTFE composites under identical tribological tests. Of all these PTFE composites, the PES/PTFE composite containing 10.0 wt% OMMT nanoparticles exhibits the best friction and wear properties (μ = 0.14, k = 5.78 × 10^?15 m³ N^–1 m^?1). This can be attributed to the existence of a polymer multicomponent layer consisting of PTFE, PES and OMMT on the composite surface as well as the formation of uniform PTFE transfer film on the worn surfaces of metal counterparts.     

Crystallization behavior of polypropylene/polyamide 6/montmorillonite nanocomposites

Polymer blended materials such as polyamide 6 (PA6)/polypropylene (PP) blends have received considerable attention in recent years. To improve the compatibility of PA6 and PP, compatibilizers like maleic anhydride‐g‐polypropylene (MPP) are often added. In addition, organically modified montmorillonite (MMT) is also used to improve the properties of various materials. In this work, the crystallization behavior of PP/PA6/MMT nanocomposites with MPP compatibilizer was investigated systematically. The annealing process effectively improved the crystallization of α‐PP. The crystallization temperature (T_c) of PA6 was increased by ca 2–3 °C on introducing MPP or MMT alone to the PP/PA6 system, whereas T_c of PP underwent no obvious change. However, when MPP and MMT were added simultaneously, T_c of PP and PA6 increased by 6.6 and 4.2 °C, respectively, and a new crystallization peak corresponding to PP‐g‐PA6 copolymer phase was observed at 162.5 °C. The combined effect of MPP and MMT led to better compatibility of PP with PA6. Moreover, the results of a non‐isothermal crystallization kinetics experiment revealed that the simultaneous introduction of MPP and MMT markedly shortened the crystallization time. Copyright © 2010 Society of Chemical Industry     

Thermal stability and thermal oxidation kinetics of PU/CA-MMT composites

In this work, we prepared three composites polyurethane (PU)/chlorhexidine acetate (CA), PU/montmorillonite (MMT), and PU/CA-MMT, and investigated their kinetics of thermal degradation at different heating rates at atmosphere. These materials had good thermal stability and aging resistance. The thermal stability of PU/CA (T_onset: 237.3°C) was not obviously enhanced by the addition of only CA when compared with that of PU (T_onset: 232.3°C), while the thermal stability of PU/MMT (T_onset: 273.4°C) was considerably enhanced by the addition of MMT due to the high thermal stability of MMT. CA-MMT filler was dispersed and exfoliated in PU more easily than CA or MMT in PU, so the composite PU/CA-MMT possessed the best thermal stability (T_onset: 285.8°C). In addition, PU/CA-MMT also had the best resistance to bacterial adhesion and antibacterial ability. The analysis with Flynn-Wall-Ozawa method showed that the activation energy of thermal oxidation of PU increased when CA-MMT was added and thus its anti-aging ability was enhanced, and the thermal oxidation of these four materials was first-order reaction. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47002.     

Preparation and properties of bio‐based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and ε‐polylysine

Glycerol polyglycidyl ether (GPE) and polyglycerol polyglycidyl ether (PGPE) were cured with ε‐poly(L ‐lysine) (PL) using epoxy/amine ratios of 1 : 1 and 2 : 1 to create bio‐based epoxy cross‐linked resins. When PGPE was used as an epoxy resin and the epoxy/amine ratio was 1 : 1, the cured neat resin showed the greatest glass transition temperature (T_g), as measured by differential scanning calorimetry. Next, the mixture of PGPE, PL, and montomorillonite (MMT) at an epoxy/amine ratio of 1 : 1 in water was dried and cured finally at 110°C to create PGPE‐PL/MMT composites. The X‐ray diffraction and transmission electron microscopy measurements revealed that the composites with MMT content 7–15 wt % were exfoliated nanocomposites and the composite with MMT content 20 wt % was an intercalated nanocomposite. The T_g and storage modulus at 50–100°C for the PGPE‐PL/MMT composites measured by DMA increased with increasing MMT content until 15 wt % and decreased at 20 wt %. The tensile strength and modulus of the PGPE‐PL/MMT composites (MMT content 15 wt %: 42 and 5300 MPa) were much greater than those of the cured PGPE‐PL resin (4 and 6 MPa). Aerobic biodegradability of the PGPE‐PL in an aqueous medium was ～ 4% after 90 days, and the PGPE‐PL/MMT nanocomposites with MMT content 7–15 wt % showed lower biodegradability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Surface modification of montmorillonite and application to the preparation of polybutadiene/montmorillonite nanocomposites

Hydrophobic organic montmorillonite (OMMT) which exists as stable dispersions in cyclohexane has been prepared by the combined modification of quaternary ammonium salts and coupling agents, and polybutadiene (PB)/OMMT nanocomposites (NCs) were successfully synthesized by in situ living anionic polymerization. The results showed that the interlayer spacing of OMMT increased dramatically on increasing the length of the long alkyl chain of C12, C16, C18 and C22 in n‐alkyltrimethylammonium ions and the number of long alkyl chains of 1C16, 2C16 and 3C16 in hexadecylmethylammonium ions. The interlayer spacings reached 4.9 and 5.07 nm, respectively, when C22 and 3C16 were used. The dispersion of MMT intercalated by quaternary ammonium salts was improved significantly after surface modification by different coupling agents, and the OMMTs could be disperses stably in cyclohexane for at least 72 h. In addition, the coupling agents did not change the inherent intercalation structure of OMMT. The results from a kinetic study and ¹H NMR analysis indicated that the incorporation of OMMT had little influence on the living polymerization and PB microstructure (proportions of 1,2‐ and 1,4‐units) when the OMMT content was below 3 wt%. However, the OMMT modified by different coupling agents had some influence on the molecular weight distribution. The results from transmission electron microscopy and X‐ray diffraction revealed that exfoliated structures of clay were obtained for all NCs. Furthermore, the results of differential scanning calorimetry and thermogravimetric analysis indicated that T_g and T_dc of NCs were increased compared to those of PB. Copyright © 2006 Society of Chemical Industry     

Water absorption behavior of different types of organophilic montmorillonite‐filled polyamide 6/polypropylene nanocomposites

The water absorption behavior of different types of organophilic montmorillonite (OMMT)‐filled polyamide 6/polypropylene nanocomposites with and without compatibilizers (maleated PP or PP‐g‐MA and maleated styrene‐ethylene/butylene‐styrene or SEBS‐g‐MA) was evaluated. Four different types of OMMT, i.e., dodecylamine‐modified MMT (D‐MMT), 12 aminolauric acid‐modified MMT (A‐MMT), stearylamine‐modified MMT (S‐MMT), and commercial organo‐MMT (C‐MMT) were used as reinforcement. The water absorption response of the nanocomposites was studied and analyzed by tensile test and morphology assessment by scanning electron microscopy (SEM). The kinetics of water absorption of the nanocomposites conforms to Fick's law. The M_m and D are dependent on the types of OMMT and compatibilizers. The equilibrium water content and diffusivity of PA6/PP blend were increased by the addition of OMMT but decreased in the presence of compatibilizers. On water absorption, both strength and stiffness of the nanocomposites were drastically decreased, but the ductility was remarkably increased. Both PP‐g‐MA and SEBS‐g‐MA played an effective role as compatibilizers for the nanocomposites. This was manifested by their higher retention ability in strength and stiffness (in the wet and re‐dried states), reduced the equilibrium water content, and diffusivity of the nanocomposites. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers