Enhanced the dispersibility and permeability of silver nanoparticles over rGO grafted by positively-charged polyethyleneimine toward broad-spectrum sterilization

Silver nanoparticles (Ag NPs) are used as antimicrobial agents due to their high-efficiency, broad-spectrum disinfection activity. However, the agglomeration and stability problems caused by excessive release of silver ions (Ag⁺) have severely restricted their developments. Herein, a novel silver/polyethyleneimine/reduced graphene oxide (Ag/PEI/rGO) antibacterial material featuring good dispersibility and permeability was rationally designed, thus benefiting for the capture of bacteria due to the introducing of highly-cationic PEI modifier and controllable release of biocidal agents (Ag⁺). Compared with Ag/rGO, the Ag/PEI/rGO has excellent stability and shows a more efficient sterilization efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with 100% germicidal efficiency with low orders of dozens of ppm. In addition, the outstanding biocompatibility of this Ag/PEI/rGO antibacterial material endows it with promising potential in sterilization applications, which is expected to solve the infection problem caused by bacterial biofilm formation.     

Adsorption and antibacterial activity of silver‐dispersed carbon aerogels

Silver‐dispersed carbon aerogels (Ag/CAs) were obtained by the direct immersion of organic aerogels in aqueous AgNO₃ solutions and then carbonization of the resulting material under a nitrogen atmosphere. The adsorption and antibacterial activity of Escherichia coli and Staphylococcus aureus on Ag/CAs were studied by the measurement of the amount of viable bacteria in suspensions and scanning electron microscopy (SEM) observations. The adsorbed amount of bacteria on samples without silver increased with an increase in the carbonization temperature and contact time. SEM studies showed that the adsorption capacity of Ag/CAs decreased with an increase in the silver content; this was considered to be mainly due to the dissolution behavior of bacteria by silver ions. The antibacterial test showed that 2.5 mg of Ag/CAs with more than 3.6% Ag could inhibit the growth of 10⁵ cfu/mL E. coli in 10 mL of a Mueller–Hinton broth culture, but in the case of S. aureus, 10‐mg samples just got the same antibacterial effect. An antibacterial persistency test showed that 25 mg of Ag/CAs with 6.5% Ag could kill 50 mL of 10⁵ cfu/mL E. coli eight times. These results indicate that Ag/CAs possess strong and long‐term antibacterial activity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1030–1037, 2006     

Antibacterial Thin Film Composite Polyamide Membranes Prepared by Sequential Interfacial Polymerization

In this work, thin film composite polyamide (PA) membranes are modified by polyethyleneimine (PEI) and 2,6‐diaminopyridine (DAP) through sequential interfacial polymerization to fabricate contact active antibacterial membranes. The modified membranes show improved hydrophilicity and enhancement of zeta potential. Upon tethering with PEI and DAP onto the PA membranes, the membrane flux increases from 35.7 to 46.7 and 50.0 L m^?2 h^?1, respectively. Further the salt rejection rate improves from 96.6% to 98.0% and 98.8%, respectively. The PA‐PEI membranes have a better antibacterial performance than PA‐DAP, with a bacteria killing ratio for both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) over 96.7%, while a commercial LC LE‐4040 membrane presents bacteria killing ratio of 13.3% for E. coli and 8.4% for S. aureus, respectively.     

Preparation and Characterization of Antibacterial Ag2O-Coated HDPE Films Obtained by Vacuum Evaporation Technique

To obtain the antibacterial plastics films, the Ag₂O-coated HDPE films were prepared through vacuum evaporation technique via depositing Ag₂O on the substrate of high density polyethylene (HDPE) films pretreated by ion bombardment. The pretreatment made the surface polarity and roughness of the substrates improved. The coating was continuous and dense, being of about 17.2 nm thick, and the content of silver ions in it was 7.0020 µg/cm². The Ag₂O-coated HDPE films exhibited strong antibacterial activity for both gram-negative bacteria (E. coli) and gram-positive bacteria (S. aureus). However, the mechanical properties of the composite films slightly dropped in contrast with the HDPE films.     

Antibacterial activity of resin-containing triethylenetetramine side chains and/or thiol groups–metal complexes

Four chelating resins containing triethylenetetramine side chains and/or thiol groups were made from macroreticular 2,3-epithiopropyl methacrylate, styrene–divinylbenzene (DVB), or methyl methacrylate–DVB copolymer beads, and then the resins bearing metal ions such as Ag⁺, Cu²⁺, and Zn²⁺ were made. The antibacterial activity of the resins bearing metal ions against Escherichia coli (E. coli) or Staphylococcus aureus (S. aureus) was investigated. The resins containing thiol groups showed the higher adsorption capacity for silver ions than for other metal ions. The resins, which contain both triethylenetetramine side chains and thiol groups, bearing silver ions (RE-TTA-Ag) exhibited high antibacterial activity against bacteria, especially E. coli, without the residual silver ions in water after contacting with bacteria. The activity of the RE-TTA-Ag did not decrease even after reusing several time. © 1996 John Wiley & Sons, Inc.     

A Novel Approach to Prepare Poly(Vinyl Acetate)/Ag Nanocomposite for Effective Antimicrobial Coating Applications

Polyvinyl acetate nanocomposites were successfully prepared based on silver nanoparticles. First, silver nanoparticles were directly prepared during the in situ emulsion polymerization of vinyl acetate monomer using AgNO₃ as a source of Ag⁺ ions and poly(vinyl alcohol) was used for dual functions as emulsifier for emulsion polymerization and as a stabilizing agent, trisodium citrate (C₆H₅O₇Na₃) was used as reducing agent for Ag⁺ ions during the polymerization process. The prepared polyvinyl acetate/Ag nanocomposites were assessed using X-ray diffraction, scanning electron microscopy, Fourier transform infrared, transmission electron microscopy, and ultraviolet spectra. The antibacterial properties of the prepared polyvinyl acetate/Ag nanocomposites were investigated as antimicrobial activity against pathogenic bacteria, i.e., Staphylococcus aureus (G^+ve bacteria) and Escherichia coli (G^?ve bacteria). These polyvinyl acetate nanocomposites could be used as a promising material for enhanced and continuous antibacterial applications as coating and packaging materials.     

Enhanced mechanical properties and bactericidal activity of polypropylene nanocomposite with dual‐function silica–silver core‐shell nanoparticles

Dual‐function silica–silver core‐shell (SiO₂@Ag) nanoparticles (NPs) with the core diameter of 17 ± 2 nm and the shell thickness of about 1.5 nm were produced using a green chemistry. The SiO₂@Ag NPs were tested in vitro against gram‐positive Staphylococcus aureus (S. aureus) and gram‐negative Escherichia coli (E. coli), both of which are human pathogens. Minimal inhibitory concentrations of the SiO₂@Ag NPs based on Ag content are 4 and 10 μg mL^?1 against S. aureus and E. coli, respectively. These values are similar to those of Ag NPs. SiO₂@Ag NPs were for the first time incorporated to a commodity polypropylene (PP) polymer. This yielded an advanced multifunctional polymer using current compounding technologies i.e., melt blending by twin‐screw extruder and solvent (toluene) blending. The composite containing 5 wt % SiO₂@Ag NPs (0.05 wt % Ag) exhibited efficient bactericidal activity with over 99.99% reduction in bacterial cell viability and significantly improved the flexural modulus of the PP. Anodic stripping voltammetry, used to investigate the antibacterial mechanism of the composite, indicated that a bactericidal Ag⁺ agent was released from the composite in an aqueous environment. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Enhanced functionality of colloidal polyaniline/polyvinyl alcohol nanocomposite as an antibacterial agent

This study describes the preparation of colloidal polyaniline/polyvinyl alcohol (PAn/PVA) nanocomposite by chemical polymerization of aniline (AN) in the presence of ammonium peroxydisulphate (APS) as an oxidant and PVA as a stabilizer. The product was characterized morphologically using a scanning electron microscope (SEM) and transmission electron microscopy (TEM), chemically using Fourier transform infrared (FTIR) and optically UV–visible. The prepared polymer was then tested for the antibacterial properties against gram‐negative bacteria: Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa); and gram‐positive bacteria: Staphylococcus aureus (S. aureus). The antibacterial properties were assessed by disk diffusion, minimum inhibitory concentration (MIC), minimum bactericidal concentrations (MBCs), and the bactericidal effect methods. The results clearly showed that colloidal PAn/PVA nanocomposite strongly inhibits the growth of wild‐type E. coli (19 ± 0.5) mm followed by P. aeruginosa (17 ± 0.5 mm) and S. aureus (17.5 ± 0.5 mm) bacteria. S. aureus was completely killed after exposure for only 15 min, whereas S. aureus and E. coli were completely killed after exposure for 25 min. J. VINYL ADDIT. TECHNOL., 22:267–272, 2016. © 2014 Society of Plastics Engineers     

Synthesis and water absorbency of polyampholytic hydrogels with antibacterial activity

Amphoteric terpolymers of acrylic acid (AA), acrylamide (AM), and N,N′‐dimethyl‐N‐ethylmeth‐acryloxylethylammoniumbromide (DMAEA‐EB) with varied compositions P[AA‐AM‐(DMAEA‐EB)] were synthesized by inverse suspension polymerization. The components of P[AA‐AM‐(DMAEA‐EB)] were verified by FTIR spectroscopy. The water absorption ability and antibacterial activity of the copolymer against Escherichia coli(E. coli) and Staphylococcus hyicus(S. hyicus) suspended in sterilized physiological saline were investigated. The introduction of  N⁺R₄ may increase the water absorbency of P[AA‐AM‐(DMAEA‐EB)] in some degree because of the excellent hydrophilicity of  N⁺R₄. The AA‐AM‐(DMAEA‐EB) hydrogels exhibited high antibacterial activity against bacteria tested. The process of adsorption between live bacteria cells and resins was at least partially reversible. A peak of antibacterial efficiency existed with increasing contact time. The resin killed 96.6% E. coli organisms and 90.3% S. hyicus organisms, respectively, within 30 min of contact at dosage of 0.1g. The concentration of DMAEA‐EB has a special effect on the antibacterial activity of the polyampholytic hydrogels, which is different from polycation. It was observed that the antibacterial activity of the resin with 2 mol % of DMAEA‐EB is superior to the copolymers tested with other compositions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Antibacterial activities of novel nanocomposite biofilms of chitosan/phosphoramide/Ag NPs

Novel nanocomposite films of chitosan/phosphoramide/Ag NPs were prepared containing 1–5% of silver nanoparticles. The Ag NPs were synthesized according to the citrate reduction method. The XRD and SEM analysis of Ag NPs, chitosan (CS), phosphoramide (Ph), CS/Ph, CS/Ag NPs films and the nanocomposite films 1–5 containing CS/Ph/1–5% Ag NPs were investigated. The in vitro antibacterial activities were evaluated against four bacteria including two Gram‐positive Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and two Gram‐negative Escherchia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) bacteria. Results revealed greater antibacterial effects of the films against Gram‐positive bacteria. Also, nanocomposite films containing higher percent of Ag NPs showed more antibacterial activities. POLYM. COMPOS. 36:454–466, 2015. © 2014 Society of Plastics Engineers     

Silver‐loaded lyocell fibers modified by tempo‐mediated oxidation

The purpose of this research was to accomplish antimicrobial properties in lyocell fibers by Ag⁺ ions sorption from aqueous silver nitrate solution. Sorption properties of lyocell fibers were improved by the selective TEMPO‐mediated oxidation, i.e. oxidation with sodium hypochlorite and catalytic amount of sodium bromide and 2,2,6,6‐tetramethylpiperidine‐1‐oxy radical (TEMPO). The most suitable experimental conditions for the selective TEMPO‐mediated oxidation were determined by changing oxidation conditions: concentration of sodium hypochlorite, as well as duration of sorption. The obtained results showed that the maximum sorption capacity (0.809 mmol of Ag⁺ ions per gram of fibers) of modified lyocell fibers was obtained for the sample modified with 4.84 mmol NaClO per gram of cellulose, during 1 h. The antifungal activity of the TEMPO‐oxidized lyocell fibers with silver ions against fungi from the Candida family, Candida albicans (ATCC 24433), and antibacterial activity against two strains: Staphylococcus aureus (ATCC 25923) and Escherichia coli (ATCC 25922) were confirmed in vitro. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Activity of antibacterial compounds immobilised on montmorillonite

The activities of antibacterial compounds, such as cetylpyridinium (CP), cetyltrimethylammonium (CTA), silver ions and metallic silver, immobilised on montmorillonite (MMT), were tested in Escherichia coli and Enterococcus faecium bacteria. The results of bacterial growth tests were confirmed by determination of the minimum inhibition concentrations (MICs). Unlike CP and CTA, the intercalated silver ions were easily released from MMT by ion-exchange with Na⁺ and acted as very effective antibacterial substances in the long term. Their bactericidal and bacteriostatic effects were determined. Generally, antibacterial compounds are effective when they are released from an inorganic carrier. Metallic silver was prepared by reduction of intercalated Ag⁺ with sodium borohydride. Antibacterial effects of metallic silver were not observed.     

Dual action bactericides: Quaternary ammonium/N‐halamine‐functionalized cellulose fiber

Bi‐functional antibacterial material was prepared by co‐grafting N‐halamine and quaternary ammonium salt monomers from cellulose fiber. The grafted fiber was characterized by Fourier transform infrared spectra, and X‐ray photoelectron spectra. The N‐halamine derived from the precursor 4‐[(acryloxy)methyl]‐4‐ethyl‐2‐oxazolidinone via chlorination treatment and the oxidative chlorine (Cl⁺) leaching behavior were investigated. The antibacterial activities of singly (only QAs‐functionalized or only Cl⁺‐releasing) and dual (QAs‐functionalized and Cl⁺‐releasing) functional cellulose fibers were tested against Gram‐negative Escherichia coli and Gram‐positive Staphylococcus aureus. Compared to singly functionalized formulations, the bi‐functional cellulose fiber exhibited excellent and rapid bactericidal performance against both E. coli and S. aureus. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40070.     

Divalent silver oxide-diatomite hybrids: Synthesis,characterization and antibacterial activity

To produce better antibacterial and low water-soluble submicron powders of divalent silver oxide (AgO), divalent silver oxide-diatomite (AgO-d) hybrids were studied. AgO-d hybrids were prepared by chemical oxidation, using silver nitrate and diatomite as raw materials and potassium persulfate as oxidant. The results show that AgO-d hybrids with AgO weight percentage up to 20.8% are obtained by oxidation of Ag⁺ adsorbing on diatomite in alkaline solution (n(KOH)/n(AgNO₃)=7.5) for 1.5 h at 333.15 K. Products were characterized by laser particle sizer, SEM, XRD, XPS, FT-IR and atomic absorption spectrophotometer (AAS). AgO-d hybrids are composed of tetragonal cristobalite, amorphous silica, monoclinic divalent silver oxide and a few of cubic silver oxide. Element Ag can be released from AgO-d hybrids but the dissolution speed is slow, which is about 3.20×10^?2 mg (L h)^?1. Antibacterial effectiveness of AgO-d hybrids was tested against Staphylococcus aureus (S. aureus ATCC6538) and Escherichia coli (E. coli ATCC8099) by the shake-flask method. Results show that AgO-d hybrids possess excellent antibacterial properties. When the concentration of AgO-d hybrids is 10 mg L^?1 and the contact time with S. aureus and E. coli is 30 min, the bactericidal rates reach up to 99.974% and 99.944%, respectively.     

Preparation of antibacterial and antifungal breathable polyether block amide/chloropropane diol membranes via solution casting

A highly hydrophilic block copolymer polyether block amide (PEBA) is modified with chloropropane diol (CPD) to impart antibacterial and antifungal properties to it without compromising with its breathability. The antibacterial properties of modified membranes are evaluated against Staphylococcus aureus (S. aureus, Gram positive) and Escherichia coli (E. coli, Gram negative) bacteria by membrane culture method. CPD plays an important role in the antibacterial property with the inhibition rate reaching 99.99% for CPD modified membranes which was 27.55% and 16.82% for pristine membrane (against S. aureus and E. coli respectively). The antifungal properties studied against Aspergllus niger, Penicillium pinophilum, Aureobasidium pullulans, Chaetomium globosum, and Trichoderma virens show heavy‐growth of fungi for pristine PEBA membrane while no growth was observed in case of CPD modified membranes. Breathability of membrane is determined in terms of water vapor transmission rate (WVTR) and it increase from 1496 g/m²/day to 2354 g/m²/day after modification. The membranes are characterized by FTIR‐ATR, SEM‐EDX, DSC, and TGA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46097.     

Green cinnamaldehyde and thymol modified zinc oxide with double synergistic antibacterial effects in polypropylene

The green cinnamaldehyde (CA) and thymol (THY) separately or successively modified O-ZnO (O-ZnO-CA, O-ZnO-THY, and O-ZnO-CA-THY) were prepared after (3-aminopropyl) triethoxysilane (KH550) was grafted to the surface of ZnO (O-ZnO) and characterized by FTIR, TGA, and SEM. Polypropylene composites (PP/O-ZnO-CA, PP/O-ZnO-THY, and PP/O-ZnO-CA-THY) were prepared by melting the modified O-ZnO and PP. The antibacterial tests showed that the antibacterial rate of PP/O-ZnO-CA and PP/O-ZnO-THY against S. aureus and E. coli was obviously enhanced. It indicated an excellent synergetic antibacterial effect of O-ZnO and the little CA or THY grafted on the surface of O-ZnO. The antibacterial effect of O-ZnO-CA and O-ZnO-THY was related to the hydrophobic and hydrophilic groups contained in CA and THY. Importantly, CA and THY in O-ZnO-CA-THY exhibited another excellent synergetic antibacterial effect against both S. aureus and E. coli. The antibacterial rate of three PP composites containing 4 phr O-ZnO-CA-THY against S. aureus and E. coli reached 95% and 90%, respectively. The mechanism was regarded as that CA and THY grafted onto the same O-ZnO improved the contact probability between antibacterial agents and bacteria. Moreover, O-ZnO-CA, O-ZnO-THY, and O-ZnO-CA-THY had excellent migration resistance in the PP matrix.     

Cure behavior and antimicrobial performance of sulfur‐cured natural rubber vulcanizates containing 2‐hydroxypropyl‐3‐piperazinylquinolinecarboxylic acid methacrylate or silver‐substituted zeolite

This work used 2‐hydroxypropyl‐3‐piperazinylquinolinecarboxylic acid methacrylate (HPQM) or silver‐substituted zeolite (SSZ) as antibacterial agents for natural rubber (NR) compounds vulcanized by conventional vulcanization (CV), semi‐efficient vulcanization, and efficient vulcanization (EV) systems. The cure behavior and antibacterial performance of the NR vulcanizates were studied by varying the loadings of HPQM or SSZ, contact times, and vulcanization systems. The antibacterial performance of the rubber compounds was examined by halo test and plate‐count‐agar methods against Escherichia coli (E. coli, ATCC 25922) and Staphylococcus aureus (S. aureus, ATCC 25923) as the testing bacteria. The cure time and crosslink density were dependent on the vulcanization recipe used but were not affected by the addition of HPQM or SSZ. Diphenylguanidine at the level of 1.0 phr (parts by weight per hundred parts of resin) in NR vulcanized by the EV system had the ability to kill the E. coli and S. aureus bacteria. The NR vulcanized by the CV system showed the most pronounced antibacterial performance, as compared with the other two vulcanization systems, via migration and diffusion of HPQM or SSZ onto the NR surfaces, this being identified by the relatively large reduction of contact angle values. The HPQM showed the most preference for NR compounds vulcanized with the CV system with a contact time of 120 min or longer to achieve a bacteria‐killing efficacy of 99.0–99.9%, the efficacy being more pronounced for E. coli bacteria. J. VINYL ADDIT. TECHNOL., 19:123–131, 2013. © 2013 Society of Plastics Engineers     

Synthesis and antimicrobial activities of polymer/montmorillonite–chlorhexidine acetate nanocomposite films

The PDMS/montmorillonite–chlorhexidine acetate (PDMS/OMMT) nanocomposite films were successfully obtained by intercalation from solution. Organo-montmorillonite (OMMT) with antibacterial activity was prepared from Na⁺-montmorillonite (Na⁺-MMT) and chlorhexidine acetate (CA) by ion exchange. The microstructure of these nanocomposite films were characterized by TEM and XRD. The effect of OMMT on mechanical properties and thermal stability of the nanocomposites was investigated. When the OMMT content was lower than 0.5 mass %, the nanocomposites showed excellent mechanical properties. The polymers were tested for antimicrobial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The PDMS/OMMT nanocomposite films strongly inhibited the growth of a wide variety of microorganisms, including Gram-positive bacteria, Gram-negative bacteria.     

Sonochemical synthesis and stabilization of concentrated antimicrobial silver‐chitosan nanoparticle dispersions

This work reports on a green synthetic route to produce concentrated aqueous dispersions of silver nanoparticles (AgNP) employing high‐intensity ultrasound (US) and chitosan (CS) as a nontoxic reducing agent for Ag⁺ salts and AgNP stabilizer. The sonication simultaneously boosted the synthesis and improved the stability of the AgNP, capping them with CS. Hybrid AgNP‐CS antimicrobial dispersions, stable for at least 6 months, were synthesized in a simple single step process. The use of US allowed for applying relatively mild processing temperatures (60 °C) and reaction time between 30 min and 3 h to obtain concentrated dispersions of AgNP that otherwise could not be obtained even after 72 h under mechanical stirring at the same reaction conditions. Upon sonication spherical AgNP‐CS with a size between 60 and 100 nm were generated, in contrast to the average diameter of ～200 nm of the particles obtained by stirring. The antibacterial efficiency of the AgNP‐CS hybrids was evaluated against the medically relevant pathogens Staphylococcus aureus and Escherichia coli. The US‐synthesized AgNP‐CS showed more than three fold higher antibacterial activity compared to the particles obtained under stirring, due to their higher concentration and smaller size. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45136.     

Antibacterial Activities of Five Cationic Gemini Surfactants with Ethylene Glycol Bisacetyl Spacers

A series of cationic gemini surfactants containing two dimethylalkylammonium chains linked by ethylene glycol bisacetyl spacers were synthesized [G_m‐AnA‐m, G = gemini surfactant, m = 12 (–C₁₂H₂₅), 14 (–C₁₄H₂₉), or 16 (–C₁₆H₃₃), A = acetyl, and n = 2, 3, or 4 is the number of ethylene glycol units in the spacers]. Because of the inductive effect of the oxygen atom in the spacer, acylation can take place using chloroacetyl chloride instead of bromoacetyl bromide which helps to limit the use of environmentally harmful reagents. Critical micelle concentrations were determined using conductivity measurements. The antibacterial activities of the surfactants against Gram‐positive bacterium Staphylococcus aureus and Gram‐negative bacterium Escherichia coli were evaluated from the minimum inhibitory concentration (MIC), minimum bacterial concentration, a time–kill study, and the inhibitory zone. Increasing the length of the spacer did not result in an obvious change of antibacterial activity. However, increasing the length of the alkyl chain apparently increased the antibacterial activity against S. aureus but decreased the antibacterial activity against E. coli. The G_{12‐A2A‐12} surfactant had the lowest CMC of 1.26 mmol L^?1 and exhibited the best antibacterial activity with a MIC of 32 μg mL^?1 toward S. aureus and 64 μg mL^?1 toward E. coli in the presence of 10⁵ CFU of bacteria. This work indicated that these cationic gemini surfactants have potential applications as antibacterial agents and emulsifiers.