Preparation and properties of dopamine reduced graphene oxide and its composites of epoxy

To improve the thermal and mechanical properties and further to expand its applications of epoxy in electronic packaging, reduced graphene oxide/epoxy composites have been successfully prepared, in which dopamine (DA) was used as reducing agent and modifier for graphene oxide (GO) to avoid the environmentally harmful reducing agents and address the problem of aggregation of graphene in composites. Further studies revealed that DA could effectively eliminate the labile oxygen functionality of GO and generate polydopamine functionalized graphene oxide (PDA‐GO) because DA would be oxidated and undergo the rearrangement and intermolecular cross‐linking reaction to produce polydopamine (PDA), which would improve the interfacial adhesion between GO and epoxy, and further be beneficial for the homogenous dispersion of GO in epoxy matrix. The effect of PDA‐GO on the thermal and mechanical properties of PDA‐GO/epoxy composites was also investigated, and the incorporation of PDA‐GO could increase the thermal conductivity, storage modulus, glass transition (T_g), and dielectric constant of epoxy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39754.     

Synthesis and properties of click coupled graphene oxide sheets with three‐dimensional macromolecules

A facile click chemistry approach to the functionalization of three‐dimensional hyperbranched polyurethane (HPU) to graphene oxide (GO) nanosheets is presented. HPU‐functionalized GO samples of various compositions were synthesized by reacting alkyne‐functionalized HPU with azide‐functionalized GO sheets. The morphological characterization of the HPU‐functionalized GO was performed using transmission electron microscopy and its chemical characterization was carried out using Fourier transform‐infrared spectroscopy, nuclear magnetic resonance spectroscopy, and X‐ray photoelectron spectroscopy. The graphene sheet surfaces were highly functionalized, leading to improved solubility in organic solvents, and consequently, enhanced mechanical, thermal, and thermoresponsive and photothermal shape memory properties. The strategy reported herein provides a very efficient method for regulating composite properties and producing high performance materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43358.     

Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties

Epoxy composites filled with both graphene oxide (GO) and diglycidyl ether of bisphenol-A functionalized GO (DGEBA–f–GO) sheets were prepared at different filler loading levels. The correlations between surface modification, morphology, dispersion/exfoliation and interfacial interaction of sheets and the corresponding mechanical and thermal properties of the composites were systematically investigated. The surface functionalization of DGEBA layer was found to effectively improve the compatibility and dispersion of GO sheets in epoxy matrix. The tensile test indicated that the DGEBA–f–GO/epoxy composites showed higher tensile modulus and strength than either the neat epoxy or the GO/epoxy composites. For epoxy composite with 0.25 wt% DGEBA–f–GO, the tensile modulus and strength increased from 3.15 ± 0.11 to 3.56 ± 0.08 GPa (∼13%) and 52.98 ± 5.82 to 92.94 ± 5.03 MPa (∼75%), respectively, compared to the neat epoxy resin. Furthermore, enhanced quasi-static fracture toughness (K_IC) was measured in case of the surface functionalization. The GO and DGEBA–f–GO at 0.25 wt% loading produced ∼26% and ∼41% improvements in K_IC values of epoxy composites, respectively. Fracture surface analysis revealed improved interfacial interaction between DGEBA–f–GO and matrix. Moreover, increased glass transition temperature and thermal stability of the DGEBA–f–GO/epoxy composites were also observed in the dynamic mechanical properties and thermo-gravimetric analysis compared to those of the GO/epoxy composites.     

Effect of Dodecyal Amine Functionalized Graphene on the Mechanical and Thermal Properties of Epoxy‐Based Composites

Simultaneous surface functionalization and reduction of graphene oxide (GO) was achieved by using dodecyl amine (DA) as surface modifying agent. The DA modified reduced GO (DA‐G) was used for subsequent preparation of DA‐G/epoxy composites by solution mixing. Fourier transform infrared spectroscopy analysis, X‐ray diffraction (XRD) and electrical conductivity measurements were conducted to establish the concurrent functionalization and reduction of GO. The effect of DA‐G on the epoxy composites at 0 to 0.75 wt% loadings was studied by investigating its static and dynamical mechanical properties. XRD study was performed to verify the dispersion of DA‐G in the epoxy polymer. Field emission scanning electron microscopy was used to investigate the fracture surface morphology of the composites and Transmission electron microscopy was employed to further confirm the dispersion of DA‐G in the matrix. It was found that the tensile strength of the composite was increased by 38.8% with the addition of 0.5 wt% of DA‐G. The good adhesion/interaction between DA‐G and epoxy resulted in the increase of storage modulus; however, glass transition temperature (T_g) value of the composites shifted to lower temperature in comparison to the neat epoxy. Thermogravimetric analysis showed small decrease in onset degradation temperature for the composites as compared to neat epoxy except for the composites containing 0.75 wt% of DA‐G. POLYM. ENG. SCI., 56:1221–1228, 2016. © 2016 Society of Plastics Engineers     

Mechanical properties of carbon fiber composites modified with graphene oxide in the interphase

The surface topographies of carbon fibers treated by sizing agents with different graphene oxide (GO) content were investigated by scanning electron microscopy. The surface elements compositions of carbon fibers were determined by X‐ray photoelectron spectrometer. The interfacial properties of composites were studied by interfacial shear strength. The thermo‐mechanical properties of two typical specimens (CF‐G0 and CF‐G1 composites) were investigated by dynamic mechanical thermal analysis. The results showed the introduction of GO sheets on carbon fibers surfaces effectively improved the mechanical properties of carbon fibers/epoxy composites. POLYM. COMPOS., 38:2425–2432, 2017. © 2016 Society of Plastics Engineers     

Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf

By taking the advantage of the excellent mechanical properties and high specific surface area of graphene oxide (GO) sheets, we develop a simple and effective strategy to improve the interlaminar mechanical properties of carbon fiber reinforced plastic (CFRP) laminates. With the incorporation of graphene oxide reinforced epoxy interleaf into the interface of CFRP laminates, the Mode-I fracture toughness and resistance were greatly increased. The experimental results of double cantilever beam (DCB) tests demonstrated that, with 2 g/m² addition of GO, the Mode-I fracture toughness and resistance of the specimen increase by 170.8% and 108.0%, respectively, compared to those of the plain specimen. The improvement mechanisms were investigated by the observation of fracture surface with scanning electron microscopies. Moreover, finite element analyses were performed based on the cohesive zone model to verify the experimental fracture toughness and to predict the interfacial tensile strength of CFRP laminates.     

Preparation of binary and hybrid epoxy nanocomposites containing graphene oxide and rubber nanoparticles: Fracture toughness and mechanical properties

Binary and hybrid epoxy nanocomposites modified with graphene oxide (GO) and core–shell rubbers (CSR) were synthesized via the solvent-exchange method. X-ray diffraction analysis and scanning electron microscopy of the samples showed a homogeneous dispersion of GO and CSR in the epoxy matrix. The tensile modulus and tensile strength of the samples modified with CSR decreased continuously with increasing CSR content; however, with the addition of only 0.05 phr GO to the neat epoxy and rubber-modified epoxy, these properties significantly increased. The use of GO and CSR individually improved the fracture toughness, but the impact of GO was greater. The simultaneous use of GO and CSR improved both the fracture toughness and the mechanical properties. Our investigation of the toughening mechanism indicated that crack deflection–bifurcation, crack pinning, and particle debonding–pullout in the presence of GO nanosheets and limited rubber particle cavitation contributed to fracture toughness improvement in the hybrid systems. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46988.     

Simultaneous in situ reduction,self-alignment and covalent bonding in graphene oxide/epoxy composites

Graphene oxide (GO)/waterborne epoxy (EP) composites are prepared using an easy, all aqueous, in situ polymerization method. GO is reduced in situ using hydrazine to achieve highly stable reduced graphene oxide (rGO)/EP dispersions, leading to the formation of composites with a self-aligned layered structure and highly anisotropic properties between the direction of alignment and that perpendicular to it. The strong covalent bonding between the epoxy and rGO and the highly aligned, ultralarge rGO sheets give rise to a remarkable percolation threshold of 0.12 vol.%, as well as much improved mechanical, electrical and thermal properties of the composites in the alignment direction. They outperform those containing GO sheets that are bonded to the epoxy matrix through a weaker π–π stacking mechanism.     

Peptide‐functionalized reduced graphene oxide as a bioactive mechanically robust tissue regeneration scaffold

Bioactive, synthetic materials represent next‐generation composites for tissue regeneration. Design of contemporary materials attempts to recapitulate the complexities of native tissue; however, few successfully mimic the order in nature. Recently, graphene oxide (GO ) has emerged as a scaffold due to its potential for bioactive functionalization and long‐range order instilled by the self‐assembly of graphene sheets. Chemical reduction of GO results in a more compatible material with enhanced properties but compromises the ability to functionalize the graphenic backbone. However, using Johnson–Claisen rearrangement chemistry, functionalization is achieved that is not liable to reduction. From reduced Claisen graphene, we polymerized short homopeptides from α ‐amino acid N ‐carboxyanhydride monomers of glutamate and lysine to result in functionalized graphenes (pGlu‐rCG and pLys‐rCG ) that are cytocompatible, degradable, and bioactive. Exposure to NIH‐3T3 fibroblasts and RAW 264.7 macrophages revealed that the materials are cytocompatible and do not alter important sub‐cellular compartments. Powders were hot pressed to form mechanically stiff (E ′: 41 and 49 MPa ), strong (UCS : 480 and 140 MPa ), and tough (U _T: 2898 and 584 J m^?3 × 10⁴) three‐dimensional constructs (pGlu‐rCG and pLys‐rCG, respectively). Overall, we report a robust chemistry and processing strategy for facile bioactive functionalization of compatible, reduced Claisen graphene for three‐dimensional biomedical applications. © 2017 Society of Chemical Industry     

Anticorrosive properties of epoxy resin coatings cured by aniline/p‐phenylenediamine copolymer

Aniline/p‐phenylenediamine copolymer [poly(ANI‐co‐p‐PDA)] was prepared by chemical oxidative polymerization. FTIR and ¹H‐NMR analysis indicate that the poly(ANI‐co‐p‐PDA) is oligomer with end‐capped amino groups, which can cure epoxy resin. The anticorrosion performance of carbon steel (CS) samples coated by epoxy resin coating cured with poly(ANI‐co‐p‐PDA) and epoxy resin coating cured with triethylenetetramine exposed to 5 wt % NaCl and 0.1 mol/L HCl aqueous solution is studied by the potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the CS coated by epoxy resin coating cured with poly (ANI‐co‐p‐PDA) has more excellent corrosion protection than that of epoxy resin coating cured with triethylenetetramine. Raman spectroscopy analysis indicates that the surface of CS coated by epoxy resin coating cured with poly(ANI‐co‐p‐PDA) forms passive layer, which is composed of α‐Fe₂O₃. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of multiscale graphene oxide‐carbon fabric and its effect on mechanical properties of hierarchical epoxy resin composite

Graphene oxide (GO) was used to modify the surface of carbon fiber layers through electrophoretic deposition, forming a multiscale reinforcement fabric. By adjusting the experimental parameters, the resulting GO‐carbon fabric showed productive and homogenous distribution of thin and less‐agglomerate GO platelets on carbon fiber surface, remarkably enlarging the surface area and roughness of carbon fabric. To investigate the effect of GO sheets on composites, GO‐carbon fabric and carbon fabric‐reinforced hierarchical epoxy resin composites were respectively manufactured. Mechanical tests demonstrated that after introducing GO flakes on carbon fabric, both the flexural strength and interlaminar shear strength of composite had achieved an increase, especially the interlaminar shear strength rising by 34%. Through fractography analysis, it was found that in pure carbon fabric‐reinforced epoxy composite, the fiber/matrix debonding fracture mechanism predominated, while after the GO decoration on carbon fiber surface, the composite featured a stronger interfacial bonding, leading to the enhancement in mechanical properties of hierarchical epoxy resin composite. POLYM. COMPOS., 37:1515–1522, 2016. © 2014 Society of Plastics Engineers     

Incorporation of hyperbranched polyamide‐functionalized graphene oxide into epoxy for improving interfacial and mechanical properties

The incorporation of hyperbranched polyamide‐functionalized graphene oxide (HPA‐GO) into epoxy was proposed to improve the interfacial and mechanical properties. Benefiting from improved dispersion and strengthened interfacial interaction, epoxy composites with HPA‐GO showed significant improvements in mechanical and thermomechanical properties at low GO loading. The interaction at the HPA‐GO/epoxy interface was investigated to confirm the occurrence of chemical bonding. Strong interfacial bonding improved the stress transfer and distribution of HPA‐GO/epoxy interface. Accordingly, the overall strength of epoxy composites was effectively improved on account of the uniform dispersion of HPA‐GO and interfacial chemical interaction between HPA‐GO and epoxy. Compared with neat epoxy resin, the inclusion of 0.10 wt% HPA‐GO led to 310.5 and 37.2% increase in impact strength and tensile strength, respectively. © 2019 Society of Chemical Industry     

The synthesis and characteristics of sodium alginate/graphene oxide composite films crosslinked with multivalent cations

Association of a method of the incorporation of graphene oxide (GO) into sodium alginate (Na‐alg) polymer matrix with a method of the use multivalent cations crosslinker was put forward to synthesize novel Na‐alg/GO nanocomposite films. The structures, morphologies, and the properties of Na‐alg/GO films were characterized by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM), thermogravimetric analysis (TGA), and tensile tests. The results revealed that the interlayer distance of GO sheets increased from 0.83 nm to 1.08 nm after assembling with Na‐alg, and Na‐alg inserted into GO layers crosslinking with multivalent cations increased the interlayer distance further. Ionic crosslinking significantly enhanced thermal and mechanical properties of Na‐alg/GO nanocomposite films. In particular, Fe³⁺ led to Na‐alg/GO nanocomposite films of significantly higher tensile strength and modulus than Ca²⁺ and Ba²⁺. The excellent thermal and mechanical properties of these novel Na‐alg/GO nanocomposite films may open up applications for Na‐alg films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43616.     

Synthesis of polythiophene/graphene oxide composites by interfacial polymerization and evaluation of their electrical and electrochemical properties

We report a new method for the synthesis of polythiophene (PTh)/graphene oxide (GO) nanocomposites by interfacial polymerization. Polymerization occurred at the interface of two immiscible solvents, i.e. n‐hexane containing thiophene and nitromethane containing GO and an initiator. Characterizations were done using Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and electrochemical and electrical conductivity measurements. Spectroscopic analyses showed successful incorporation of GO in the PTh matrix. Morphological analysis revealed good dispersion of GO sheets in the polymer matrix. The PTh/GO composites showed marked improvements in thermal stability and electrical conductivity (2.7 × 10^?4 S cm^?1) compared to pure PTh. The composites exhibited excellent electrochemical reversibility compared to pure PTh at a scan rate of 0.1 V s^?1. The composites were stable even up to 100 electrochemical cycles, indicating good cycle performance. The specific capacitance of the composites was calculated using cyclic voltammetry and was found to be 99 F g^?1. © 2014 Society of Chemical Industry     

Mechanical and piezo‐resistive properties of styrene–butadiene–styrene copolymer covalently modified with graphene/styrene–butadiene–styrene composites

As novel piezoelectric materials, carbon‐reinforced polymer composites exhibit excellent piezoelectric properties and flexibility. In this study, we used a styrene–butadiene–styrene triblock copolymer covalently grafted with graphene (SBS‐g‐RGO) to prepare SBS‐g‐RGO/styrene–butadiene–styrene (SBS) composites to enhance the organic solubility of graphene sheets and its dispersion in composites. Once exfoliated from natural graphite, graphene oxide was chemically modified with 1,6‐hexanediamine to functionalize with amino groups (GO–NH₂), and this was followed by reduction with hydrazine [amine‐functionalized graphene oxide (RGO–NH₂)]. SBS‐g‐RGO was finally obtained by the reaction of RGO–NH₂ and maleic anhydride grafted SBS. After that, X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and other methods were applied to characterize SBS‐g‐RGO. The results indicate that the SBS molecules were grafted onto the graphene sheets by covalent bonds, and SBS‐g‐RGO was dispersed well. In addition, the mechanical and electrical conductivity properties of the SBS‐g‐RGO/SBS composites showed significant improvements because of the excellent interfacial interactions and homogeneous dispersion of SBS‐g‐RGO in SBS. Moreover, the composites exhibited remarkable piezo resistivity under vertical compression and great repeatability after 10 compression cycles; thus, the composites have the potential to be applied in sensor production. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46568.     

The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites

The effect of dispersion state of graphene on mechanical properties of graphene/epoxy composites was investigated. The graphene sheets were exfoliated from graphite oxide (GO) via thermal reduction (thermally reduced GO, RGO). Different dispersions of RGO sheets were prepared with and without ball mill mixing. It was found that the composites with highly dispersed RGO showed higher glass transition temperature (T_g) and strength than those with poorly dispersed RGO, although no significant differences in both the tensile and flexural moduli are caused by the different dispersion levels. In particular, the T_g was increased by nearly 11 °C with the addition of 0.2 wt.% well dispersed RGO to epoxy. As expected, the highly dispersed RGO also produced one or two orders of magnitude higher electrical conductivity than the corresponding poorly dispersed RGO. Furthermore, an improved quasi-static fracture toughness (K_IC) was measured in the case of good dispersion. The poorly and highly dispersed RGO at 0.2 wt.% loading resulted in about 24% and 52% improvement in K_IC of cured epoxy thermosets, respectively. RGO sheets were observed to bridge the micro-crack and debond/delaminate during fracture process due to the poor filler/matrix and filler/filler interface, which should be the key elements of the toughening effect.     

Preparation and properties of acrylonitrile–butadiene rubber–graphene nanocomposites

The graphene oxide (GO) was prepared by sonication‐induced exfoliation from graphite oxide, which was produced by oxidation from graphite flakes with a modified Hummer's method. The GO was then treated by hydrazine to obtain reduced graphene oxide (rGO). On the basis of the characterization results, the GO was successfully reduced to rGO. Acrylonitrile–butadiene rubber (NBR)–GO and NBR–rGO composites were prepared via a solution‐mixing method, and their various physical properties were investigated. The NBR–rGO nanocomposite demonstrated a higher curing efficiency and a change in torque compared to the gum and NBR–GO compounds. This agreed well with the crosslinking density measured by swelling. The results manifested in the high hardness (Shore A) and high tensile modulus of the NBR–rGO compounds. For instance, the tensile modulus at a 0.1‐phr rGO loading greatly increased above 83, 114, and 116% at strain levels of 50, 100, and 200%, respectively, compared to the 0.1‐phr GO loaded sample. The observed enhancement was highly attributed to a homogeneous dispersion of rGO within the NBR matrix; this was confirmed by scanning electron microscopy and transmission electron microscopy analysis. However, in view of the high ultimate tensile strength, the NBR–GO compounds exhibited an advantage; this was presumably due to strong hydrogen bonding or polar–polar interactions between the NBR and GO sheets. This interfacial interaction between GO and NBR was supported by the marginal increase in the glass‐transition temperatures of the NBR compounds containing fillers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42457.     

Characterization and performance of dodecyl amine functionalized graphene oxide and dodecyl amine functionalized graphene/high‐density polyethylene nanocomposites: A comparative study

Dodecyl amine (DA) functionalized graphene oxide(DA‐GO) and dodecyl amine functionalized reduced graphene oxide (DA‐RGO) were produced by using amidation reaction and chemical reduction, then two kinds of well dispersed DA‐GO/high‐density polyethylene (HDPE) and DA‐RGO/HDPE nanocomposites were prepared by solution mixing method and hot‐pressing process. Thermogravimetric, X‐ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, X‐ray diffractions, and Raman spectroscopy analyses showed that DA was successfully grafted onto the graphene oxide surface by uncleophilic substitution and the amidation reaction, which increased the intragallery spacing of graphite oxide, resulting in the uniform dispersion of DA‐GO and DA‐RGO in the nonpolar xylene solvent. Morphological analysis of nanocomposites showed that both DA‐GO and DA‐RGO were homogeneously dispersed in HDPE matrix and formed strong interfacial interaction. Although the crystallinity, dynamic mechanical, gas barrier, and thermal stability properties of HDPE were significantly improved by addition of small amount of DA‐GO or DA‐RGO, the performance comparison of DA‐GO/HDPE and DA‐RGO/HDPE nanocomposites indicated that the reduction of DA‐GO was not necessary because the interfacial adhesion and aspect ratio of graphene sheets had hardly changed after reduction, which resulting in almost the same properties between DA‐GO/HDPE and DA‐RGO/HDPE nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39803.     

Effect of flake size on thermal properties of graphene oxide/poly(methyl methacrylate) composites prepared via in situ polymerization

The effect of graphene oxide (GO) flake size on thermal properties of GO/poly(methyl methacrylate) (GO/PMMA) composites prepared via in situ polymerization was investigated. Two styles of GO sheets were synthesized from different sizes of graphite powders by modified Hummers' method and GO/PMMA composites with GO of different sizes were prepared via in situ polymerization. Transmission electron microscopy verified that GO sheets produced from large graphite powders was obviously larger than that from small graphite powders. The similar number of layers and disorder degree of two types of GO sheets were proved by X‐ray diffraction and Raman, respectively. X‐ray diffraction and scanning electron microscopy results of GO/composites proved the homogenous dispersion of both two types of GO sheets in polymer matrix. Dynamic mechanical analysis and thermogravimetric analysis results showed that large GO sheets exhibit better improvement than small GO sheets in thermal properties of the composites. Compared with neat PMMA, the glass transition temperature and decomposition temperature of the composites with large GO sheets (0.20 wt %) were increased by 15.9 and 25.9 °C, respectively. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46290.     

Control of the functionality of graphene oxide for its application in epoxy nanocomposites

Amino- and epoxy-functionalized graphene oxide (GO) were synthesized separately through a wash-and-rebuild process utilizing two differently terminated silane coupling agents. The modified GO sheets were then incorporated into an epoxy resin to prepare nanocomposites. The addition of 0.2 wt% amino-functionalized GO (APTS-GO) yielded a 32% increase in Young's modulus (3.3 GPa) and 16% increase in tensile strength (81.2 MPa). Less reinforcement was observed with the epoxy-functionalized GO (GPTS-GO) but there was a more significant increase in ductility for GPTS-GO/epoxy, with the fracture toughness (critical intensity factor, K_IC) and fracture energy (critical strain energy release rate, G_IC) nearly doubling at 0.2 wt% loading (1.46 MPam^1/2 and 0.62 kJ/m² for K_IC and G_IC, respectively). Raman spectroscopy measurements revealed that the GPTS-GO was dispersed more uniformly than the APTS-GO in the epoxy matrix, and better interfacial stress transfer was found for the APTS-GO. Thus the wash-and-rebuild process affords a novel strategy for controlling the functionality of graphene in the quest to develop high-performance graphene-based nanocomposites.